Attachment_0002_-_DA_Form_2404.xlsx
Department of the Army Form XLSX spreadsheet 13 KB Posted
- Attached to
- M110 Semi-automatic Sniper System (SASS)
- Solicitation number
- W56HZV17R0026
About this file
Attachment_0002_-_DA_Form_2404.xlsx
View the file
Other versions and copies of DA Form 2404
Show all 13
Who attaches DA Form 2404
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1 M110 Test, Tear Down and Evaluation & DA 2404 Combination Report/Checklist
| Organization: Knight's Armarment Company Titusville, FL | Nomenclature and Model: M110 Semi-Automatic Sniper System | |
| Serial Number: | DATE: | |
| Explanation of Information Requirements to Complete Column Entries | ||
| Column a. - Item number is pre-entered |
Column b. - Enter the applicable condition status symbol Column c. - Item to be Inspected Description Column d. - Explanation of what constitutes "Condition Code A" - No action required Column e. - Enter deficiencies and shortcomings Column f. - Show corrective action for deficiency or shortcoming from Column e.
Column g. - Individual ascertaining completed corrective action initial in this column Column h . Initials of inspector
| Explanation and Guidance for Entering Status Symbols |
| "X" - Indicates a deficiency in the equipment that places it in an inoperable status. |
CIRCLED "X" - Not applicable HORIZONTAL DASH "(-)" - Indicates that a requrired inspection, component replacement, or maintenance operation check is due but has not been accomplished, or an overdue Modified Work Order has not been accomplished DIAGONAL "(/)" - Indicates a material defect other than a deficiency which must be corrected to increase efficiency or to make the item completely serviceable.
INITIALS OF INSPECTOR - Indicates that a completely satisfactory condition exists
| Signature of Inspector | Time of Inspection | Signature of Supervisor | Time | Manhours Required |
| INSP. REPAIR |
| a | b | c | d | e | f | g |
| Item Number | Status | Item To Be Inspected and Replaced | Equipment Not Condition Code A If | Deficiencies and Shortcomings | ||
| Corrective Action Required | ||||||
| Inspectors initials | ||||||
| 1 | Ensure Case, Rifle and Magazine are clear of Ammunition | NA | ||||
| 2 | Inspect weapon case for all equipment. (Rifle, Suppressor, Leupold Scope, BII, COEI) | NA | ||||
| Verify Weapon Serial Number 24123-R | ||||||
| 3 | Verify Suppressor Serial number 24611 | |||||
| 4 | Scope Cover & Crown Cover Assy. 20298 | |||||
| 5 | One-Piece Scope Mount Assy. 30mm 24755 | |||||
| 6 | 200 - 600 Meter Folding Rear Sight 98474 | |||||
| 7 | Pouch, Tan Nylon, for 10-Round Mag 24722 | |||||
| 8 | Pouch, Tan Nylon, Single Pocket for 20-Round Magazines 24721 | |||||
| 9 | Pouch, Tan Nylon, Double Pocket for 20-Round Magazines 24724 | |||||
| 10 | Zippered Soft Scope Carrying Case, Tan Nylon 20297 | |||||
| 11 | Lower Receiver 25198 | |||||
| 12 | Rifle Hard Case 24761 | |||||
| 13 | Leupold Scope 67940 | |||||
| 14 | Foam Upper 24760 | |||||
| 15 | Foam Lower 24759 |
File details come from the government source that posted it.