Attachment_0003_-_SPI-AM_13030066.docx

MANUFACTURER

PRODUCT

CORTEC

VpCI PIPE STRIP

BARREL GUARD

VCI BORE STRIP 0.400 DIAMETER

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

19200

3. SPI NO.

AM13013050

4. NATIONAL STOCK NO.

1005-01-534-2841

5.DATE OF DRAWING/SPI(YYMMDD)

071130

6. REVISION / ERR NO.

A/L07S3111

7. QUP / UNIT OF ISSUE

1 EA

70.0

10. UNIT PACK CU (CU. FT.)(0.000)

6.050

11. UNIT PACK SIZE (INCHES)(00.0)

50.0 X 17.0 X 12.3

12. MILITARY PRESERVATION

MIL-STD-2073-1, METHOD 42 (MODIFIED)

DESCRIPTION

13. CLEANING

* AND NOTES 2.1.1 AND 2.1.1.1

14. DRYING

* AND NOTE 2.1.2

15. PACKING

a. LEVEL A

MIL-STD-2073-1

b. LEVEL B

MIL-STD-2073-1

16. MARKING

MIL-STD-129 AND NOTE 2.3

17. NOTES/DRAWINGS

NOTES:

A) THIS SPI IS A SUPPLEMENT TO THE PACKAGING CURRENTLY IMPLEMENTED BY THE CONTRACTOR AS DEFINED BY THE M110 SASS CONFIGURATION AND AS REQUIRED BY CONTRACT W56HZV-17-R0026 IT INCLUDES THE REQUIREMENT TO UTILIZE VOLATILE CORROSION INHIBITOR (VCI) PROTECTION FOR THE WEAPON AND SPECFIC COMPONENTS.

B) A VCI TUBE STRIP OF MINIMUM DIMENSIONS 0.19 INCHES OD AND 23 INCHES IN LENGTH SHALL BE INSERTED IN THE BORE OF THE RIFLE AND BENT OVER SO THAT IT WILL NOT FALL INTO THE BARREL.

SUGGESTED SOURCES OF SUPPLY FOR VCI PIPE/BORE STRIP:

C) THE RIFLE AND MAGAZINES SHALL BE ENCLOSED IN VCI BAGS. EACH BAG SHALL BE NON-TOXIC, TRANSPARENT, 3-4 MIL THICK POLYETHYLENE FILM HAVING A MULTI-METAL VOLATILE CORROSION INHIBITOR. BAG SHALL BE FABRICATED IN ACCORDANCE WITH MIL- DTL-117 FOR A CLASS-B BAG. COMPATIBILITY PROVISIONS OF MIL-I-8574 APPLY. SUGGESTED SOURCES OF SUPPLY:

WSC: ITEM SIZE: 50.0 X 17.0 X 12.3 ITEM WEIGHT: 70.00 APPROVED: BRADFORD J. FOLEY

DISTRIBUTION STATEMENT A, UNLIMITED

DD Form 2169, JUN 1997 Previous editions are obsolete Page 1 of 2MANUFACTURER

PRODUCT

CORTEC

VpCI 126

DAUBERT-CROMWELL

CLEAR PAK 3000

ZERUST

ICT510-C MULTI-METAL

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

19200

3. SPI NO.

AM13013050

4. NATIONAL STOCK NO.

1005-01-534-2841

5.DATE OF DRAWING/SPI(YYMMDD)

071130

6. REVISION / ERR NO.

A/L07S3111

17. NOTES/DRAWINGS

D) FOUR VCI DIFFUSERS SHALL BE INTEGRATED INSIDE THE SYSTEM CASE. TWO DIFFUSSERS SHALL BE COUNTERSUNK INTO THE UPPER SYSTEM FOAM TRAY AND TWO SHALL BE COUNTERSUNK INTO THE LOWER FOAM TRAY. THE DIFFUSERS SHALL NOT BE REMOVED FROM THEIR SEALED PACKAGING. THE DIFFUSERS SHALL BE ZERUST® VC2-2 VAPOR CAPSULES (NSN: 6850-01-133-0373). SEE FIGURES 1 AND 2 FOR APPROXIMATE LOCATIONS.

E) ONE ADHESIVE BACKED WATERPROOF LABEL SHALL BE PLACED INSIDE OF THE UPPER LID OF THE SYSTEM CASE IN THE GENERAL AREA DEPICTED IN FIGURES 1 AND 2.

F) SERIAL NUMBER MARKINGS ARE REQUIRED AND SHALL BE ON THE PACKIING LIST. THE NOMENCLATURE SHALL BE OMITTED FROM THE EXTERIOR SHIPPING CONTAINER

FIGURE 1 – BOTTOM LAYER

FIGURE 2 – UPPER LAYER

DISTRIBUTION STATEMENT A, UNLIMITED

DD Form 2169, JUN 1997 Previous editions are obsolete Page 2 of 2 Pages image1.png