B08- Attachment 0011- WPM Drawing ACV00831.pdf

APPROVEDREVISION

LTR. DESCRIPTION BY DATENOTES:

1. ASME Y14.5M AND ISPM NO. 15 APPLY.

2. IN ACCORDANCE WITH THE REQUIREMENTS OF THE INTERNATIONAL

STANDARDS FOR PHYTOSANITARY MEASURES (ISPM) 15; THE FOLLOWING

HEAT TREATMENT PROCESS HAS BEEN APPROVED BY THE AMERICAN

LUMBER STANDARDS COMMITTEE (ALSC) AND IS REQUIRED FOR ALL

WOOD PACKAGING MATERIAL (WPM). ALL PALLETS, SKIDS, FILLER

ASSEMBLIES, OR DUNNAGE ASSEMBLIES USED IN THE CONSTRUCTION OF

PALLETIZED OR SKIDDED LOADS MADE OF NON-MANUFACTURED WOOD

SHALL BE HEAT-TREATED. ALL WPM SHALL BE CONSTRUCTED FROM HEAT

TREATED (TREATED TO 56 DEGREES CELSIUS, CORE TEMPERATURE, FOR

30 MINUTES) LUMBER AND CERTIFIED BY AN AGENCY ACCREDITED BY THE

ALSC IN ACCORDANCE WITH WOOD PACKAGING MATERIAL POLICY AND

WOOD PACKAGING MATERIAL ENFORCEMENT REGULATIONS

(WWW.ALSC.ORG).

3. A PALLET OR SKID MANUFACTURER OR A MANUFACTURER OF WOOD

USED TO BUILD FILLER ASSEMBLIES AND DUNNAGE ASSEMBLIES FOR

PALLETIZED OR SKIDDED LOADS SHALL ENSURE TRACEABILITY TO THE

ORIGINAL SOURCE OF THE ISPM-15 CERTIFICATION MARK. FOREIGN

MANUFACTURERS SHALL HAVE THE HEAT TREATMENT AND MARKING OF

NON-MANUFACTURED WOOD PRODUCTS VERIFIED IN ACCORDANCE WITH

THE ISPM-15 COMPLIANCE PROGRAM.

4. EACH PALLET, SKID, FILLER ASSEMBLY, OR DUNNAGE ASSEMBLY SHALL

BE MARKED TO SHOW THE CONFORMANCE TO THE INTERNATIONAL PLANT

PROTECTION CONVENTION STANDARD. INDIVIDUAL PIECES OF LUMBER

INTEGRATED INTO A PALLET, SKID, FILLER ASSEMBLY, OR DUNNAGE

ASSEMBLY SHOULD NOT BE CONSIDERED INDEPENDENTLY, BUT SHOULD

BE CONSIDERED AS A SINGLE UNIT FOR MARKING PURPOSES, AND THE

ISPM-15 CERTIFICATION MARK SHALL BE CONTRASTING AND CLEARLY

VISIBLE. ALTHOUGH THESE ASSEMBLIES MUST BE MARKED AS SPECIFIED

HEREIN, IT IS UNDERSTOOD AND ACCEPTABLE THAT THE CERTIFICATION

MARKING MAY OR MAY NOT BE VISIBLE ON INTERIOR ASSEMBLIES ONCE

THE PALLETIZED OR SKIDDED UNIT IS FULLY ASSEMBLED. FIGURE 1 ON

SHEET 1 IS DEPICTED FOR INFORMATION PURPOSES ONLY, THE ISPM-15

CERTIFICATION MARK SHALL COMPLY WITH THE SPECIFIC ISPM-15

REQUIREMENTS FOR THE MATERIAL BEING MARKED AND BE LEGIBLE,

CONTRASTING, AND CLEARLY VISIBLE.

5. THE ISPM-15 CERTIFICATION MARKS FOR PALLETS, SKIDS, FILLER

ASSEMBLIES, AND OTHER DUNNAGE ASSEMBLIES SHALL BE STENCILED OR

BRANDED, AVOID THE USE OF RED OR ORANGE FOR STENCILS. THE

PALLETS OR SKIDS SHALL BE MARKED ON TWO OPPOSITE CORNER END

POSTS, SEE FIGURE 2 ON SHEET 2 FOR DETAILS. DUNNAGE ASSEMBLIES,

TO INCLUDE FILLER ASSEMBLIES, SHALL BE MARKED ON TWO OPPOSITE

SIDES AS DEPICTED IN FIGURES 3 AND 4 ON SHEET 2.

SHEET

DATE

DFTSMN. CHECKER PROJ. ENGR.

SUBMITTED

APPROVED BY ORDER OF COMMANDING GENERAL,

U.S. ARMY MATERIAL COMMAND

U.S. ARMY

JOINT MUNITIONS COMMAND

DEFENSE AMMUNITION CENTER (DAC)

MCALESTER, OKLAHOMA 74501-9053

CAGE

SCALE

SIZE

DEFENSE AMMUNITION CENTER

UNLESS OTHERWISE NOTED

ASSOCIATE DIRECTOR FOR ENGINEERING DIRECTORATE

DRAWING No.

D 28620

REV.

APPLICATION

MATERIAL

±.01 ±.005 ±0°15' ±1/64

DIMENSIONS ARE IN INCHES

TOLERANCES:

.XX .XXX FRACTIONS

REMOVE ALL BURRS AND SHARP EDGES

.010 R OR CHAMFER MAX.

UNIT WT

SJMAC-DEV

CHIEF, TRANSPORTATION ENG. DIV.

NEXT ASSEMBLY USED ON

DESIGN ACTIVITY

HEAT TREATMENT OF WOODEN

PALLETS, SKIDS, FILLER ASSEMBLIES,

AND DUNNAGE ASSEMBLIES

ACV00831 -

NONE 1 OF 2

10-03-01

TRAN

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

- PRODUCTION BASELINE (ERR R10K3003) 10-03-01LFQT

ENG.

CAD MAINTAINED. CHANGES SHALL BE INCORPORATED

BY THE DESIGN ACTIVITY.

SYMBOL COUNTRY CODE

PRODUCER/TREATMENT PROVIDER CODE

TREATMENT CODE

FIGURE 1

(REFERENCE ONLY)

FIEFFER.LAURA.A.

1230375727

Digitally signed by FIEFFER.LAURA.A.1230375727 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=FIEFFER.LAURA.A.1230375727 Date: 2010.03.19 12:33:58 -05'00'BARICKMAN.PH

ILIP.W.1230202

Digitally signed by

BARICKMAN.PHILIP.W.1230202202

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=BARICKMAN.PHILIP.W.1230202202 Date: 2010.03.22 10:46:39 -05'00'

BEAVER.JERRY.W.123

0949952

Digitally signed by BEAVER.JERRY.W.1230949952 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=BEAVER.JERRY.W.1230949952 Date: 2010.03.22 11:58:40 -05'00'

CARNEY.GARY.BU

RTON.1038708038

Digitally signed by

CARNEY.GARY.BURTON.1038708038

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=CARNEY.GARY.BURTON.1038708038 Date: 2010.03.22 13:45:01 -05'00'

SHEET

DATE

DFTSMN. CHECKER PROJ. ENGR.

U.S. ARMY

JOINT MUNITIONS COMMAND

DEFENSE AMMUNITION CENTER (DAC)

MCALESTER, OKLAHOMA 74501-9053

CAGE

SCALE

SIZE DRAWING No.

D 28620

REV.

UNIT WT

DESIGN ACTIVITY

ACV00831 -

NONE 2 OF 2

10-03-01

TRAN

UNLESS OTHERWISE NOTED

MATERIAL

±.01 ±.005 ±0°15' ±1/64

DIMENSIONS ARE IN INCHES

TOLERANCES:

.XX .XXX FRACTIONS

REMOVE ALL BURRS AND SHARP EDGES

.010 R OR CHAMFER MAX.

APPROVEDREVISION

LTR. DESCRIPTION BY DATE

- PRODUCTION BASELINE (ERR R10K3003) 10-03-01LFQT

ENG.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

HEAT TREATMENT OF WOODEN

PALLETS, SKIDS, FILLER ASSEMBLIES,

AND DUNNAGE ASSEMBLIES

CAD MAINTAINED. CHANGES SHALL BE INCORPORATED

BY THE DESIGN ACTIVITY.

LOCATION OF ISPM-15

CERTIFICATION MARK

LOCATION OF ISPM-15

CERTIFICATION MARK

FIGURE 2

TYPICAL PALLET, SOME HIDDEN LINES

OMITTED FOR CLARITY.

LOCATION OF ISPM-15

CERTIFICATION MARK

LOCATION OF ISPM-15

CERTIFICATION MARK

FIGURE 3

TYPICAL FILLER ASSEMBLY, SOME HIDDEN

LINES OMITTED FOR CLARITY.

LOCATION OF ISPM-15

CERTIFICATION MARK

LOCATION OF ISPM-15

CERTIFICATION MARK

ON THE OPPOSITE SIDE

FIGURE 4

TYPICAL DUNNAGE ASSEMBLY, SOME HIDDEN

LINES OMITTED FOR CLARITY.