ATTACHMENT 6 - UFGS 08 11 13 (Doors).pdf

USACE / NAVFAC / AFCEC UFGS- 08 11 13 ( August 2020)

Pr epar i ng Act i v i t y: NAVFAC Super sedi ng UFGS- 08 11 13 ( Febr uar y 2010)

UNI FI ED FACI LI TI ES GUI DE SPECI FI CATI ONS

Ref er ences ar e i n agr eement wi t h UMRL dat ed Oct ober 2023

SECTI ON TABLE OF CONTENTS

DI VI SI ON 08 - OPENI NGS

SECTI ON 08 11 13

STEEL DOORS AND FRAMES

08/ 20

PART 1 GENERAL

1. 1 REFERENCES

1. 2 SUBMI TTALS

1. 3 DELI VERY, STORAGE, AND HANDLI NG

PART 2 PRODUCTS

2. 1 STANDARD STEEL DOORS

2. 1. 1 Cl assi f i cat i on - Level , Per f or mance, Model

2. 1. 1. 1 St andar d Dut y Door s

2. 1. 1. 2 Heavy Dut y Door s

2. 1. 1. 3 Ext r a Heavy Dut y Door s

2. 1. 1. 4 Maxi mum Dut y Door s

2. 2 CUSTOM HOLLOW METAL DOORS

2. 3 I NSULATED STEEL DOOR SYSTEMS

2. 4 ACCESSORI ES

2. 4. 1 Shel ves f or Dut ch Door s

2. 4. 2 Louver s

2. 4. 2. 1 I nt er i or Louver s

2. 4. 2. 2 Ext er i or Louver s

2. 4. 3 Ast r agal s

2. 4. 4 Mol di ngs

2. 5 I NSULATI ON CORES

2. 6 STANDARD STEEL FRAMES

2. 6. 1 Wel ded Fr ames

2. 6. 2 Knock- Down Fr ames

2. 6. 3 Mul l i ons and Tr ansom Bar s

2. 6. 4 St ops and Beads

2. 6. 5 Ter mi nat ed St ops

2. 6. 6 Cased Openi ngs

2. 6. 7 Anchor s

2. 6. 7. 1 Wal l Anchor s

2. 6. 7. 2 Fl oor Anchor s

SECTI ON 08 11 13 Page 1

2. 7 FI RE [ AND] [ SMOKE] DOORS AND FRAMES

2. 7. 1 Label s

2. 7. 2 Over si zed Door s

2. 7. 3 Ast r agal on Fi r e [ and Smoke] Door s

2. 8 EXTERI OR FRAMES

2. 9 HARDWARE PREPARATI ON

2. 10 FI NI SHES

2. 10. 1 Fact or y- Pr i med Fi ni sh

2. 10. 2 Hot - Di p Zi nc- Coat ed and Fact or y- Pr i med Fi ni sh

2. 10. 3 El ect r ol yt i c Zi nc- Coat ed Anchor s and Accessor i es

2. 10. 4 Fact or y- Appl i ed Enamel Fi ni sh

2. 11 FABRI CATI ON AND WORKMANSHI P

2. 12 PROVI SI ONS FOR GLAZI NG

PART 3 EXECUTI ON

3. 1 I NSTALLATI ON

3. 1. 1 Fr ames

3. 1. 2 Door s

3. 1. 3 Fi r e [ and Smoke] Door s and Fr ames

3. 2 PROTECTI ON

3. 3 CLEANI NG

- - End of Sect i on Tabl e of Cont ent s - -

SECTI ON 08 11 13 Page 2

USACE / NAVFAC / AFCEC UFGS- 08 11 13 ( August 2020)

Pr epar i ng Act i v i t y: NAVFAC Super sedi ng UFGS- 08 11 13 ( Febr uar y 2010)

UNI FI ED FACI LI TI ES GUI DE SPECI FI CATI ONS

Ref er ences ar e i n agr eement wi t h UMRL dat ed Oct ober 2023

SECTI ON 08 11 13

STEEL DOORS AND FRAMES

08/ 20

NOTE: Thi s gui de speci f i cat i on cover s st eel door s and f r ames. Some par agr aphs may need t o be suppl ement ed t o meet pr oj ect r equi r ement s.

I ncl ude Sect i on 08 34 73 SOUND CONTROL DOOR ASSEMBLI ES when pr oj ect i ncl udes f l ush st eel sound r et ar dant door s wi t h Sound Tr ansmi ssi on Cl assi f i cat i on ( STC) r angi ng f r om 25 t o 45.

Adher e t o UFC 1- 300- 02 Uni f i ed Faci l i t i es Gui de Speci f i cat i ons ( UFGS) For mat St andar d when edi t i ng t hi s gui de speci f i cat i on or pr epar i ng new pr oj ect speci f i cat i on sect i ons. Edi t t hi s gui de speci f i cat i on f or pr oj ect speci f i c r equi r ement s by addi ng, del et i ng, or r evi s i ng t ext . For br acket ed i t ems, choose appl i cabl e i t em( s) or i nser t appr opr i at e i nf or mat i on.

Remove i nf or mat i on and r equi r ement s not r equi r ed i n r espect i ve pr oj ect , whet her or not br acket s ar e pr esent .

Comment s, suggest i ons and r ecommended changes f or t hi s gui de speci f i cat i on ar e wel come and shoul d be submi t t ed as a Cr i t er i a Change Request ( CCR) .

NOTE: On t he dr awi ngs, show:

1. Si zes of door openi ngs, t hi cknesses of door s, swi ngs, and t r avel s of door s, and desi gn of door s, whet her f l ush panel , f ul l f l ush, panel ed, gl azed, or l ouver ed. I t i s r ecommended t hat st andar d door - t ype nomencl at ur e, SDI 106, be used t o i ndi cat e desi gns ( e. g. , F, L, G, GL i n l i eu of A, B, C) .

2. Det ai l s of nonst r uct ur al mul l i ons, mul l i on cover s, and r emovabl e mul l i ons.

SECTI ON 08 11 13 Page 3

3. Type and t hi ckness of gl azi ng r equi r ed; whet her or not i nsul at i ng gl ass uni t s ar e r equi r ed.

4. Met hod, t ype, and spaci ng r equi r ed f or anchor i ng door f r ames t o adj oi ni ng const r uct i on.

5. Li nt el s and r ei nf or cement r equi r ed t o suppor t wal l s or par t i t i ons above door s.

6. Type of shop f i ni sh on st eel sur f aces.

7. Fr ee ar ea f or l ouver s i n door s.

8. Compl et e door schedul e. Schedul e shoul d assi gn a separ at e number f or each openi ng and shoul d i ndi cat e door t ype and st y l e, mat er i al , desi gn, s i ze, t hi ckness, gl azed or ungl azed, c l ass f i r e r at i ng f or f i r e door s, har dwar e set number , t hr eshol d mat er i al , i f any, and mat er i al f or f r ames, mul l i ons, and t r ansom bar s.

PART 1 GENERAL

1. 1 REFERENCES

NOTE: Thi s par agr aph i s used t o l i s t t he publ i cat i ons c i t ed i n t he t ext of t he gui de speci f i cat i on. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by basi c desi gnat i on onl y and l i s t ed i n t hi s par agr aph by or gani zat i on, desi gnat i on, dat e, and t i t l e.

Use t he Ref er ence Wi zar d' s Check Ref er ence f eat ur e when you add a Ref er ence I dent i f i er ( RI D) out si de of t he Sect i on' s Ref er ence Ar t i c l e t o aut omat i cal l y pl ace t he r ef er ence i n t he Ref er ence Ar t i c l e. Al so use t he Ref er ence Wi zar d' s Check Ref er ence f eat ur e t o updat e t he i ssue dat es.

Ref er ences not used i n t he t ext wi l l aut omat i cal l y be del et ed f r om t hi s sect i on of t he pr oj ect speci f i cat i on when you choose t o r econci l e r ef er ences i n t he publ i sh pr i nt pr ocess.

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN WELDI NG SOCI ETY ( AWS)

AWS D1. 1/ D1. 1M ( 2020; Er r at a 1 2021) St r uct ur al Wel di ng Code - St eel

SECTI ON 08 11 13 Page 4

ASTM I NTERNATI ONAL ( ASTM)

ASTM A653/ A653M ( 2023) St andar d Speci f i cat i on f or St eel Sheet , Zi nc- Coat ed ( Gal vani zed) or Zi nc- I r on Al l oy- Coat ed ( Gal vanneal ed) by t he Hot - Di p Pr ocess

ASTM A879/ A879M ( 2012; R 2017) St andar d Speci f i cat i on f or St eel Sheet , z i nc Coat ed by t he El ect r ol yt i c Pr ocess f or Appl i cat i ons Requi r i ng Desi gnat i on of t he Coat i ng Mass on Each Sur f ace

ASTM A924/ A924M ( 2022a) St andar d Speci f i cat i on f or Gener al Requi r ement s f or St eel Sheet , Met al l i c- Coat ed by t he Hot - Di p Pr ocess

ASTM C578 ( 2022) St andar d Speci f i cat i on f or Ri gi d, Cel l ul ar Pol yst yr ene Ther mal I nsul at i on

ASTM C591 ( 2022) St andar d Speci f i cat i on f or Unf aced Pr ef or med Ri gi d Cel l ul ar Pol y i socyanur at e Ther mal I nsul at i on

ASTM C612 ( 2014; R 2019) St andar d Speci f i cat i on f or Mi ner al Fi ber Bl ock and Boar d Ther mal I nsul at i on

ASTM D2863 ( 2019) St andar d Test Met hod f or Measur i ng t he Mi ni mum Oxygen Concent r at i on t o Suppor t Candl e- Li ke Combust i on of Pl ast i cs ( Oxygen I ndex)

ASTM E1300 ( 2016) St andar d Pr act i ce f or Det er mi ni ng Load Resi st ance of Gl ass i n Bui l di ngs

ASTM F2247 ( 2018) St andar d Test Met hod f or Met al Door s Used i n Bl ast Resi st ant Appl i cat i ons ( Equi val ent St at i c Load Met hod)

ASTM F2248 ( 2012) St andar d Pr act i ce f or Speci f y i ng an Equi val ent 3- Second Dur at i on Desi gn Loadi ng f or Bl ast Resi st ant Gl azi ng Fabr i cat ed wi t h Lami nat ed Gl ass

ASTM F2927 ( 2012) St andar d Test Met hod f or Door Syst ems Subj ect t o Ai r bl ast Loadi ngs

BUI LDERS HARDWARE MANUFACTURERS ASSOCI ATI ON ( BHMA)

ANSI / BHMA A156. 115 ( 2016) Har dwar e Pr epar at i on i n St eel Door s and St eel Fr ames

NATI ONAL ASSOCI ATI ON OF ARCHI TECTURAL METAL MANUFACTURERS ( NAAMM)

NAAMM HMMA 810 ( 2009) Hol l ow Met al Door s

SECTI ON 08 11 13 Page 5

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 80 ( 2022) St andar d f or Fi r e Door s and Ot her Openi ng Pr ot ect i ves

NFPA 105 ( 2022) St andar d f or Smoke Door Assembl i es and Ot her Openi ng Pr ot ect i ves

NFPA 252 ( 2022) St andar d Met hods of Fi r e Test s of Door Assembl i es

STEEL DOOR I NSTI TUTE ( SDI / DOOR)

SDI / DOOR 111 ( 2009) Recommended Det ai l s f or St andar d St eel Door s, Fr ames, and Accessor i es and Rel at ed Component s

SDI / DOOR 113 ( 2023) St andar d Pr act i ce f or Det er mi ni ng t he St eady- St at e Ther mal Tr ansmi t t ance of St eel Door and Fr ame Assembl i es

SDI / DOOR A250. 3 ( 2019) Test Pr ocedur e and Accept ance Cr i t er i a f or Fact or y Appl i ed Fi ni sh Coat i ngs f or St eel Door s and Fr ames

SDI / DOOR A250. 4 ( 2022) Test Pr ocedur e and Accept ance Cr i t er i a f or Physi cal Endur ance f or St eel Door s, Fr ames and Fr ame Anchor s

SDI / DOOR A250. 6 ( 2020) Recommended Pr act i ce f or Har dwar e Rei nf or ci ng on St andar d St eel Door s and Fr ames

SDI / DOOR A250. 8 ( 2023) Speci f i cat i ons f or St andar d St eel Door s and Fr ames

SDI / DOOR A250. 11 ( 2022) Recommended Er ect i on I nst r uct i ons f or St eel Fr ames

U. S. DEPARTMENT OF DEFENSE ( DOD)

UFC 4- 010- 01 ( 2018; wi t h Change 2, 2022) DoD Mi ni mum Ant i t er r or i sm St andar ds f or Bui l di ngs

UNDERWRI TERS LABORATORI ES ( UL)

UL 10C ( 2016; Repr i nt May 2021) UL St andar d f or Saf et y Posi t i ve Pr essur e Fi r e Test s of Door Assembl i es

1. 2 SUBMI TTALS

NOTE: Revi ew Submi t t al Descr i pt i on ( SD) def i ni t i ons i n Sect i on 01 33 00 SUBMI TTAL PROCEDURES and edi t t he f ol l owi ng l i s t , and cor r espondi ng submi t t al i t ems i n t he t ext , t o r ef l ect onl y t he submi t t al s r equi r ed f or t he pr oj ect . The Gui de Speci f i cat i on t echni cal edi t or s have cl assi f i ed t hose i t ems t hat

SECTI ON 08 11 13 Page 6 r equi r e Gover nment appr oval , due t o t hei r compl exi t y or cr i t i cal i t y, wi t h a " G. " Gener al l y, ot her submi t t al i t ems can be r evi ewed by t he Cont r act or ' s Qual i t y Cont r ol Syst em. Onl y add a " G" t o an i t em i f t he submi t t al i s suf f i c i ent l y i mpor t ant or compl ex i n cont ext of t he pr oj ect .

For Ar my pr oj ect s, f i l l i n t he empt y br acket s f ol l owi ng t he " G" c l assi f i cat i on, wi t h a code of up t o t hr ee char act er s t o i ndi cat e t he appr ovi ng aut hor i t y. Codes f or Ar my pr oj ect s usi ng t he Resi dent Management Syst em ( RMS) ar e: " AE" f or Ar chi t ect - Engi neer ; " DO" f or Di st r i ct Of f i ce ( Engi neer i ng Di v i s i on or ot her or gani zat i on i n t he Di st r i ct Of f i ce) ; " AO" f or Ar ea Of f i ce; " RO" f or Resi dent Of f i ce; and " PO" f or Pr oj ect Of f i ce. Codes f ol l owi ng t he " G" t ypi cal l y ar e not used f or Navy and Ai r For ce pr oj ect s.

The " S" c l assi f i cat i on i ndi cat es submi t t al s r equi r ed as pr oof of compl i ance f or sust ai nabi l i t y Gui di ng Pr i nci pl es Val i dat i on or Thi r d Par t y Cer t i f i cat i on and as descr i bed i n Sect i on 01 33 00 SUBMI TTAL

PROCEDURES.

Choose t he f i r st br acket ed i t em f or Navy and Ai r For ce pr oj ect s, or choose t he second br acket ed i t em f or Ar my pr oj ect s.

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" or " S" c l assi f i cat i on. Submi t t al s not havi ng a " G" or " S" c l assi f i cat i on ar e [ f or Cont r act or Qual i t y Cont r ol appr oval . ] [ f or i nf or mat i on onl y. When used, a code f ol l owi ng t he " G" c l assi f i cat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . ] Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

Door s; G[ , [ _____] ]

Fr ames; G[ , [ _____] ]

Accessor i es

Schedul e of Door s; G[ , [ _____] ]

Schedul e of Fr ames; G[ , [ _____] ]

SD- 03 Pr oduct Dat a

Door s; G[ , [ _____] ]

Recycl ed Cont ent f or St eel Door Pr oduct ; S

Fr ames; G[ , [ _____] ]

Recycl ed Cont ent f or St eel Fr ame Pr oduct ; S

SECTI ON 08 11 13 Page 7

Accessor i es

[ SD- 04 Sampl es

Fact or y- appl i ed Enamel Fi ni sh; G[ , [ _____] ]

] 1. 3 DELI VERY, STORAGE, AND HANDLI NG

Del i ver door s, f r ames, and accessor i es undamaged and wi t h pr ot ect i ve wr appi ngs or packagi ng. [ St r ap knock- down f r ames i n bundl es. ] [ Pr ovi de t empor ar y st eel spr eader s secur el y f ast ened t o t he bot t om of each wel ded f r ame. ] St or e door s and f r ames on pl at f or ms under cover i n c l ean, dr y, vent i l at ed, and accessi bl e l ocat i ons, wi t h 6 mm 1/ 4 i nch ai r space bet ween door s. Remove damp or wet packagi ng i mmedi at el y and wi pe af f ect ed sur f aces dr y. Repl ace damaged mat er i al s wi t h new.

PART 2 PRODUCTS

2. 1 STANDARD STEEL DOORS

NOTE: St andar d st eel door s ar e t he most common and compet i t i vel y pr i ced whi ch appl y t o most met al door openi ngs i n most pr oj ect s. Di f f er ent c l assi f i cat i ons and per f or mance r equi r ement s ar e avai l abl e as expl ai ned i n t he edi t or ' s not es i n par agr aph CLASSI FI CATI ON - LEVEL, PERFORMANCE, MODEL.

NOTE: For f or ced ent r y, i ncl ude t he br acket ed opt i on bel ow r egar di ng ext er i or gl azi ng when per sonnel densi t y i s gr eat er t han one per son per 40 squar e met er s 430 squar e f eet and t he mi ni mum AT/ FP st andof f di st ances ar e met . Thi s does not i ncl ude guar d t ype f aci l i t i es or s i ngl e and dupl ex det ached f ami l y housi ng. These r equi r ement s ar e speci f i ed i n UFC 4- 010- 01 " DoD Mi ni mum Ant i t er r or i sm St andar ds f or Bui l di ngs" . I ncl ude l ast br acket ed sent ence i f ext er i or door s must meet ant i t er r or i sm r equi r ement s of UFC 4- 010- 01.

SDI / DOOR A250. 8, except as speci f i ed ot her wi se. Pr epar e door s t o r ecei ve door har dwar e as speci f i ed i n Sect i on 08 71 00 DOOR HARDWARE. Under cut wher e i ndi cat ed. Pr ovi de ext er i or door s wi t h t op edge cl osed f l ush and seal ed t o pr event wat er i nt r usi on. Pr ovi de door s at 44. 5 mm 1- 3/ 4 i nch t hi ck, unl ess ot her wi se i ndi cat ed. Pr ovi de door mat er i al t hat uses a mi ni mum of 25 per cent r ecycl ed cont ent . Pr ovi de dat a i ndi cat i ng per cent age of r ecycl ed cont ent f or st eel door pr oduct . [ Pr ovi de ext er i or gl azi ng i n accor dance wi t h ASTM F2248 and ASTM E1300. ] [ Ext er i or door s must be t est ed i n accor dance wi t h ASTM F2247 or ASTM F2927 t o meet r equi r ement s of UFC 4- 010- 01. ]

2. 1. 1 Cl assi f i cat i on - Level , Per f or mance, Model

NOTE: When a door l evel i s not r equi r ed, del et e t he ent i r e par agr aph f or t hat l evel . Door l evel s f or

SECTI ON 08 11 13 Page 8 var i ous l ocat i ons shoul d be det er mi ned i n accor dance wi t h SDI 108 Tabl e 2 and t he f ol l owi ng l i s t .

Cl oset door s ( wi t hout l ocks) Level 1 I ndi v i dual of f i ces, st or age r ooms, cl assr ooms, pat i ent s ' r ooms, bat hr ooms, and bedr ooms ( except BEQ bedr ooms) Level 2 BEQ sl eepi ng r oom ent r ance door s and i nt er i or egr ess door s Level 3 Ext er i or Mai n ent r ance and ci r cul at i on door s and ot her l ocat i ons Level 4

Model desi gnat i ons ar e as f ol l ows:

Model 1 Ful l Fl ush Desi gn Model 2 Seaml ess Desi gn Model 3 St i l e and Rai l

Wher e appear ance i s i mpor t ant and edge seams ar e obj ect i onabl e, use Model 2.

Cor e const r uct i ons must be at t he manuf act ur er ' s di scr et i on and ar e as f ol l ows:

a. Kr af t / Paper Honeycomb

b. Pol yur et hane Modi f i ed Pol y i socyanur at e

c. Pol yst yr ene

d. Mi ner al Boar d

e. Ver t i cal St eel St i f f ener s

2. 1. 1. 1 St andar d Dut y Door s

SDI / DOOR A250. 8, Level 1, physi cal per f or mance Level C, Model [ 1] [ 2] , of s i ze( s) and desi gn( s) i ndi cat ed and cor e const r uct i on as r equi r ed by t he manuf act ur er . Pr ovi de [ wher e shown] [ f or door s No. [ _____] ] .

2. 1. 1. 2 Heavy Dut y Door s

SDI / DOOR A250. 8, Level 2, physi cal per f or mance Level B, Model [ 1] [ 2] , wi t h cor e const r uct i on as r equi r ed by t he manuf act ur er [ f or i nt er i or door s] [ and ] [ f or ext er i or door s] , of s i ze( s) and desi gn( s) i ndi cat ed. [ Wher e ver t i cal st i f f ener cor es ar e r equi r ed, t he space bet ween t he st i f f ener s must be f i l l ed wi t h boar d i nsul at i on. ] [ Pr ovi de Level 2 [ wher e i ndi cat ed] [ f or door s No. [ _____] ] . ]

2. 1. 1. 3 Ext r a Heavy Dut y Door s

SDI / DOOR A250. 8, Level 3, physi cal per f or mance Level A, Model [ 1] [ 2] [ 3] wi t h cor e const r uct i on as r equi r ed by t he manuf act ur er [ f or i nt er i or door s] [ and ] [ f or i ndi cat ed ext er i or door s] , of s i ze( s) and desi gn( s) i ndi cat ed. [ Wher e ver t i cal st i f f ener cor es ar e r equi r ed, t he space bet ween t he st i f f ener s must be f i l l ed wi t h boar d i nsul at i on. ] [ Pr ovi de Level 3 [ wher e i ndi cat ed] [ f or door s No. [ _____] ] . ]

2. 1. 1. 4 Maxi mum Dut y Door s

SDI / DOOR A250. 8, Level 4, physi cal per f or mance Level A, Model [ 1] [ 2] wi t h

SECTI ON 08 11 13 Page 9 cor e const r uct i on as r equi r ed by t he manuf act ur er [ f or i nt er i or door s] [ and ] [ f or i ndi cat ed ext er i or door s] , of s i ze( s) and desi gn( s) i ndi cat ed. [ Wher e ver t i cal st i f f ener cor es ar e r equi r ed, t he space bet ween t he st i f f ener s must be f i l l ed wi t h boar d i nsul at i on. ] [ Pr ovi de Level 4 [ wher e i ndi cat ed] [ f or door s No. [ _____] ] . ]

[ 2. 2 CUSTOM HOLLOW METAL DOORS

NOTE: Cust om st eel door s ar e t ypi cal l y schedul ed i n l ocat i ons t hat ( 1) r equi r e uni que di mensi ons t hat ar e over si zed, non- st andar d, or l ocat ed i n speci al use bui l di ngs or r et r of i t s, ( 2) r equi r e enhanced per f or mance f r om weat her , sound r educt i on, f or ced ent r y, bul l et r esi st ant , or bl ast door s, or ( 3) r equi r e speci f i c aest het i cs t hat r equi r e embossment s, at t r act i ve panel s or ot her cust omi zat i on possi bl y f or hi st or i c or ot her i nst al l at i ons. Wher e onl y st andar d st eel door s ar e used i n a pr oj ect , del et e t hi s par agr aph.

NOTE: For f or ced ent r y, i ncl ude t he br acket ed opt i on bel ow r egar di ng ext er i or gl azi ng when per sonnel densi t y i s gr eat er t han one per son per 40 squar e met er s 430 squar e f eet and t he mi ni mum AT/ FP st andof f di st ances ar e met . Thi s does not i ncl ude guar d t ype f aci l i t i es or s i ngl e and dupl ex det ached f ami l y housi ng. These r equi r ement s ar e speci f i ed i n UFC 4- 010- 01 " DoD Mi ni mum Ant i t er r or i sm St andar ds f or Bui l di ngs" . I ncl ude l ast br acket ed sent ence i f ext er i or door s must meet ant i t er r or i sm r equi r ement s of UFC 4- 010- 01.

Pr ovi de cust om hol l ow met al door s wher e nonst andar d st eel door s ar e i ndi cat ed. Pr ovi de cust om st eel door s i n t he door s i ze( s) , desi gn( s) , mat er i al s, const r uct i on, gages, and f i ni sh as speci f i ed f or cust om st eel door s and compl yi ng wi t h t he r equi r ement s of NAAMM HMMA 810. Fi l l al l spaces i n ext er i or door s wi t h i nsul at i on. Cl ose t op and bot t om edges wi t h st eel channel s not l i ght er t han 1. 5 mm t hi ck 16 gage. [ Cl ose t ops of ext er i or door s f l ush wi t h an addi t i onal channel and seal t o pr event wat er i nt r usi on. ] Pr epar e door s t o r ecei ve har dwar e speci f i ed i n Sect i on 08 71 00 DOOR HARDWARE. [ Under cut door s wher e i ndi cat ed. ] Pr ovi de door s at 44. 5 mm 1- 3/ 4 i nch t hi ck, unl ess ot her wi se i ndi cat ed. [ Pr ovi de ext er i or gl azi ng i n accor dance wi t h ASTM F2248 and ASTM E1300. ] [ Ext er i or door s much be t est ed i n accor dance wi t h ASTM F2247 and ASTM F2927 t o meet t he r equi r ement s of UFC 4- 010- 01. ]

] [ 2. 3 I NSULATED STEEL DOOR SYSTEMS

NOTE: I nsul at ed st eel door s and f r ames ar e r ecommended f or ent r ances t o dwel l i ng uni t s i n UEPH' s and bar r acks. Edi t or del et e t he par agr aph t o sui t t he pr oj ect .

SECTI ON 08 11 13 Page 10

Pr ovi de i nsul at ed st eel door s and f r ames i n accor dance wi t h SDI / DOOR 113 at ent r ances t o dwel l i ng uni t s and wher e i ndi cat ed. Meet ener gy r equi r ement s i ncl udi ng Sol ar Heat Gai n Coef f i c i ent ( SHGC) and U- f act or .

Pr ovi de i nsul at ed st eel door s wi t h a cor e of pol yur et hane f oam; f ace sheet s, edges, and f r ames of gal vani zed st eel not l i ght er t han 0. 7 mm t hi ck 23 gage, 1. 5 mm t hi ck 16 gage, and 1. 5 mm 16 gage r espect i vel y; magnet i c weat her st r i ppi ng; nonr emovabl e- pi n hi nges; t her mal - br eak al umi num t hr eshol d; and vi nyl door bot t om. Pr ovi de t o door s and f r ames a phosphat e t r eat ment , r ust - i nhi bi t i ve pr i mer , and baked acr yl i c enamel f i ni sh. Test door s i n accor dance wi t h SDI / DOOR A250. 4 and meet t he r equi r ement s f or Level C. Pr epar e door s t o r ecei ve speci f i ed har dwar e. Pr ovi de door s 44. 5 mm 1- 3/ 4 i nch t hi ck.

] 2. 4 ACCESSORI ES

2. 4. 1 Shel ves f or Dut ch Door s

SDI / DOOR 111. Fabr i cat e shel ves of st eel not l i ght er t han 1. 5 mm t hi ck 16 gage, [ [ _____] mm i nches wi de] [ of t he s i ze i ndi cat ed] . Pr ovi de br acket s of st ock t ype f abr i cat ed of t he same met al used t o f abr i cat e shel ves.

2. 4. 2 Louver s

NOTE: I nt er i or and ext er i or l ouver s ar e appl i ed t o st eel door s di f f er ent l y. I nt er i or door l ouver s ar e r emovabl e on si de by mol di ng f l ange and ext er i or door l ouver f r ames ar e per manent l y wel ded t o t he door and pr ovi ded wi t h r emovabl e bi r d scr een or i nsect scr een.

NOTE: Avoi d l ouver s on ext er i or door s i n humi d l ocat i ons or pr oj ect l ocat i ons wi t h Envi r onment al Sever i t y Cl assi f i cat i ons ( ESC) of C3 t hr u C5 as t hey ar e ver y suscept i bl e t o weat her det er i or at i on.

Humi d l ocat i ons ar e t hose i n ASHRAE cl i mat e zones 0A, 1A, 2A, 3A, 3C, 4C and 5C ( as i dent i f i ed i n ASHRAE 90. 1) . See UFC 1- 200- 01 f or det er mi nat i on of ESC f or pr oj ect l ocat i ons. Consi der ot her means of pr ovi di ng t he vent i ng f unct i on.

Ensur e t hat l ouver s i n door s ar e dr ai nabl e, weat her pr oof and f act or y pr i med. Door s wi t h f act or y- i nst al l ed l ouver s ar e al so r ecommended.

2. 4. 2. 1 I nt er i or Louver s

NOTE: Li ght pr oof l ouver s ar e used when l i ght t r ansmi ssi on must be avoi ded. However , t hese pr ovi de a mi ni mal f r ee ai r f l ow.

SDI / DOOR 111. Wher e i ndi cat ed, pr ovi de l ouver s of st at i onar y [ s i ght pr oof ] [ and ] [ l i ght pr oof ] t ype[ wher e schedul ed] . [ Louver s f or l i ght pr oof must not t r ansmi t l i ght . ] Det achabl e mol di ngs on r oom or non

SECTI ON 08 11 13 Page 11 secur i t y s i de of door ; on secur i t y s i de of door , mol di ngs t o be i nt egr al par t of l ouver . For m l ouver f r ames of 0. 9 mm t hi ck 20 gage st eel and l ouver bl ades of a mi ni mum 0. 6 mm 24 gage. [ Louver s f or l i ght pr oof door s must have mi ni mum of 20 per cent net - f r ee openi ng. ] [ Si ght pr oof l ouver s t o be i nver t ed [ " V" bl ade desi gn wi t h mi ni mum 55] [ and ] [ i nver t ed [ " Y" ] bl ade desi gn wi t h mi ni mum 40] per cent net - f r ee openi ng. ]

2. 4. 2. 2 Ext er i or Louver s

NOTE: Use al umi num scr eens i n humi d l ocat i ons or pr oj ect l ocat i ons wi t h Envi r onment al Sever i t y Cl assi f i cat i ons ( ESC) of C3 t hr u C5. Humi d l ocat i ons ar e t hose i n ASHRAE cl i mat e zones 0A, 1A, 2A, 3A, 3C, 4C and 5C ( as i dent i f i ed i n ASHRAE

90. 1) . See UFC 1- 200- 01 f or det er mi nat i on of ESC f or pr oj ect l ocat i ons.

Pr ovi de l ouver s of t he i nver t ed [ " Y" ] [ " V" ] [ " Z" ] t ype wi t h mi ni mum of [ 30] [ 55] [ 35] per cent net - f r ee openi ng. Wel d or t enon l ouver bl ades t o cont i nuous channel f r ame and wel d assembl y t o door t o f or m wat er t i ght assembl y. For m l ouver s of hot - di p gal vani zed st eel of same gage as door f aci ngs. At l ouver s pr ovi de st eel - f r amed [ i nsect ] [ bi r d] scr eens secur ed t o r oom si de and r eadi l y r emovabl e. Pr ovi de [ al umi num wi r e c l ot h, 7 by 7 per 10 mm or 7 by 6 per 10 mm 18 by 18 or 18 by 16 i nch mesh, f or i nsect scr eens] [ gal vani zed st eel , 13 by 13 mm 1/ 2 by 1/ 2 i nch mesh har dwar e cl ot h, f or bi r d scr eens] . Net - f r ee l ouver ar ea t o be bef or e scr eeni ng.

2. 4. 3 Ast r agal s

For pai r s of ext er i or st eel door s whi ch wi l l not have al umi num ast r agal s or r emovabl e mul l i ons, as speci f i ed i n Sect i on 08 71 00 DOOR HARDWARE pr ovi de over l appi ng st eel ast r agal s wi t h t he door s.

2. 4. 4 Mol di ngs

Pr ovi de mol di ngs ar ound gl ass of i nt er i or and ext er i or door s and l ouver s of i nt er i or door s. Pr ovi de nonr emovabl e mol di ngs on out si de of ext er i or door s and on cor r i dor s i de of i nt er i or door s. Ot her mol di ngs may be st at i onar y or r emovabl e. Secur e i nsi de mol di ngs t o st at i onar y mol di ngs, or pr ovi de snap- on mol di ngs.

2. 5 I NSULATI ON CORES

NOTE: Door manuf act ur er s use var i ous i nsul at i on mat er i al s as t hei r st andar d. Unl ess t he desi gner has a speci f i c r eason t o el i mi nat e an i nsul at i on mat er i al , i t i s advi sed t o mai nt ai n al l l i s t ed t ypes of i nsul at i on mat er i al s.

I f addi t i onal i nt er i or or speci al t y door s r equi r e t her mal i nsul at i on i ncl ude t he br acket ed opt i on and i ndi cat e t hese r equi r ement s on t he door schedul e i n t he dr awi ngs.

Pr ovi de i nsul at i ng cor es at al l ext er i or door s[ and ot her speci f i c door s

SECTI ON 08 11 13 Page 12 not ed i n t he door schedul e] , and pr ovi de an appar ent U- f act or of . 48 i n accor dance wi t h SDI / DOOR 113 and conf or mi ng t o:

a. Ri gi d Cel l ul ar Pol y i socyanur at e Foam: ASTM C591, Type I or I I , f oamed- i n- pl ace or i n boar d f or m, wi t h oxygen i ndex of not l ess t han 22 per cent when t est ed i n accor dance wi t h ASTM D2863; or

b. Ri gi d Pol yst yr ene Foam Boar d: ASTM C578, Type I or I I ; or

c. Mi ner al boar d: ASTM C612, Type I .

2. 6 STANDARD STEEL FRAMES

NOTE: Desi gnat e whet her f r ames ar e t o be wel ded or knock- down f i el d- assembl ed t ype. I n gener al , ut i l i ze wel ded f r ames unl ess knock- down f r ames ar e r equi r ed due t o a r enovat i on pr oj ect or t he t empor ar y nat ur e of t he par t i t i ons bei ng const r uct ed. Wel ded f r ames must be bui l t i n as CMU wal l s ar e const r uct ed or bef or e dr ywal l i s i nst al l ed on st uds. Sl i p- on dr ywal l f r ames must be knock- down t ype t o be i nser t ed af t er dr ywal l i s i nst al l ed.

When bot h t ypes ar e r equi r ed f or t he pr oj ect , modi f y par agr aph t o speci f y bot h t ypes and l ocat i ons wher e r equi r ed.

SDI / DOOR A250. 8, Level [ 1] [ 2] [ 3] [ 4] , except as ot her wi se speci f i ed. For m f r ames t o s i zes and shapes i ndi cat ed, wi t h [ wel ded cor ner s] [ or ] [ knock- down f i el d- assembl ed cor ner s] . Pr ovi de st eel f r ames f or door s, [ t r ansoms, ] [ s i del i ght s, ] [ mul l i ons, ] [ cased openi ngs, ] [ and ] [ i nt er i or gl azed panel s, ] unl ess ot her wi se i ndi cat ed. Pr ovi de f r ame pr oduct t hat uses a mi ni mum of 25 per cent r ecycl ed cont ent . Pr ovi de dat a i ndi cat i ng per cent age of r ecycl ed cont ent f or st eel f r ame pr oduct .

2. 6. 1 Wel ded Fr ames

Cont i nuousl y wel d f r ame f aces at cor ner j oi nt s. Mechani cal l y i nt er l ock or cont i nuousl y wel d st ops and r abbet s. Gr i nd wel ds smoot h.

Wel d f r ames i n accor dance wi t h t he r ecommended pr act i ce of t he St r uct ur al Wel di ng Code Sect i ons 1 t hr ough 6, AWS D1. 1/ D1. 1M and i n accor dance wi t h t he pr act i ce speci f i ed by t he pr oducer of t he met al bei ng wel ded.

[ 2. 6. 2 Knock- Down Fr ames

NOTE: Remove t hi s sect i on unl ess knock- down f r ames ar e r equi r ed due t o a r enovat i on pr oj ect or t he t empor ar y nat ur e of t he par t i t i ons bei ng const r uct ed.

Desi gn cor ner s f or s i mpl e f i el d assembl y by conceal ed t enons, spl i ce pl at es, or i nt er l ocki ng j oi nt s t hat pr oduce squar e, r i gi d cor ner s and a t i ght f i t and mai nt ai n t he al i gnment of adj oi ni ng member s. Pr ovi de l ocknut s f or bol t ed connect i ons.

SECTI ON 08 11 13 Page 13

] 2. 6. 3 Mul l i ons and Tr ansom Bar s

Pr ovi de mul l i ons and t r ansom bar s of c l osed or t ubul ar const r uct i on wi t h heads and j ambs but t - wel ded t oget her [ or knock- down f or f i el d assembl y] .

Bot t om of door mul l i ons must have adj ust abl e f l oor anchor s and spr eader connect i ons.

2. 6. 4 St ops and Beads

Pr ovi de f or m and l oose st ops and beads f r om 0. 9 mm t hi ck 20 gage st eel .

Pr ovi de f or gl azed and ot her openi ngs i n st andar d st eel f r ames. Secur e beads t o f r ames wi t h oval - head, count er sunk Phi l l i ps sel f - t appi ng sheet met al scr ews or conceal ed cl i ps and f ast ener s. Space f ast ener s appr oxi mat el y 300 t o 400 mm 12 t o 16 i nch on cent er . Mi t er mol ded shapes at cor ner s. But t or mi t er squar e or r ect angul ar beads at cor ner s.

2. 6. 5 Ter mi nat ed St ops

NOTE: Speci f y or i ndi cat e when st ops ( r abbet st r i ps) ar e r equi r ed t o be t er mi nat ed above t he f l oor ; gener al l y, t er mi nat ed st ops ar e used i n hospi t al s and si mi l ar bui l di ngs t o el i mi nat e pr oj ect i ons on whi ch wheel s of beds and car t s ar e caught and t o el i mi nat e smal l , di r t - cat chi ng cor ner s.

Wher e i ndi cat ed, t er mi nat e i nt er i or door f r ame st ops 150 mm 6 i nch above f l oor . [ Do not t er mi nat e st ops of f r ames f or [ l i ght pr oof , ] [ soundpr oof , ] [ or l ead- l i ned] door s. ]

2. 6. 6 Cased Openi ngs

Fabr i cat e f r ames f or cased openi ngs of same mat er i al , gage, and assembl y as speci f i ed f or met al door f r ames, except omi t door st ops and pr epar at i on f or har dwar e.

2. 6. 7 Anchor s

Pr ovi de anchor s t o secur e t he f r ame t o adj oi ni ng const r uct i on. Pr ovi de st eel anchor s, z i nc- coat ed not l i ght er t han 1. 2 mm t hi ck 18 gage.

2. 6. 7. 1 Wal l Anchor s

Pr ovi de at l east t hr ee anchor s f or each j amb. For f r ames whi ch ar e mor e t han 2285 mm 7. 5 f eet i n hei ght , pr ovi de one addi t i onal anchor f or each j amb f or each addi t i onal 760 mm 2. 5 f eet or f r act i on t her eof .

a. Masonr y: Pr ovi de anchor s of cor r ugat ed or per f or at ed st eel st r aps or 5 mm 3/ 16 i nch di amet er st eel wi r e, adj ust abl e or T- shaped;

b. St ud par t i t i ons: Wel d or ot her wi se secur el y f ast en anchor s t o backs of f r ames. Desi gn anchor s t o be f ast ened [ t o wood st uds wi t h nai l s, ] [ t o c l osed st eel st uds wi t h sheet met al scr ews, and t o open st eel st uds by wi r i ng or wel di ng] ;

c. Compl et ed openi ngs: Secur e f r ames t o pr evi ousl y pl aced concr et e or masonr y wi t h expansi on bol t s i n accor dance wi t h SDI / DOOR 111;

and

SECTI ON 08 11 13 Page 14

d. Sol i d pl ast er par t i t i ons: Secur e anchor s sol i dl y t o back of f r ames and t i e i nt o t he l at h. Pr ovi de adj ust abl e t op st r ut anchor s on each si de of f r ame f or f ast eni ng t o st r uct ur al member s or cei l i ng const r uct i on above. Pr ovi de si ze and t ype of st r ut anchor s as r ecommended by t he f r ame manuf act ur er .

2. 6. 7. 2 Fl oor Anchor s

NOTE: I n masonr y const r uct i on, ext ensi on cl i ps at bot t om of f r ames ar e usual l y r equi r ed i n l ocat i ons wher e addi t i onal f l oor f i l l occur s on t op of st r uct ur al s l abs, and t he met al f r ames and par t i t i ons ar e i nst al l ed bef or e t he f i l l i s pl aced.

I n such cases, t he dr awi ngs or speci f i cat i ons shoul d i ndi cat e t he di st ance r equi r ed bet ween t he r ough sl ab and f i ni shed f l oor .

Pr ovi de f l oor anchor s dr i l l ed f or 10 mm 3/ 8 i nch anchor bol t s at bot t om of each j amb member . [ Wher e f l oor f i l l occur s, t er mi nat e bot t om of f r ames at t he i ndi cat ed f i ni shed f l oor l evel s and suppor t by adj ust abl e ext ensi on cl i ps r est i ng on and anchor ed t o t he st r uct ur al s l abs. ]

2. 7 FI RE [ AND] [ SMOKE] DOORS AND FRAMES

NOTE: For each openi ng r equi r i ng l abel ed door s, speci f y or i ndi cat e t he hour l y r at i ng of f i r e door s, as est abl i shed by t he Nat i onal Fi r e Pr ot ect i on Associ at i on. When l abel ed door s ar e necessar y on bot h s i des of a f i r e wal l , pr ovi de adequat e det ai l s. Label s cannot be obt ai ned f or doubl e- act i ng door s or f or st eel angl e f r ames.

Met al f r ames t o r ecei ve l abel ed wood f i r e door s must al so be l abel ed.

I f t he f aci l i t y i ncl udes spr i nkl er s and ot her f i r e pr ot ect i on measur es, door s may or may not r equi r e i nsul at i on f or t emper at ur e r i se. I n pr oj ect s t hat r equi r e t emper at ur e r i se cr i t er i a on f i r e door s, i ncl ude t he br acket ed l ast sent ence i n t he par agr aph bel ow and i ndi cat e t hi s r equi r ement i n t he door schedul e.

Pr ovi de f i r e[ and smoke] door s and f r ames i n accor dance wi t h NFPA 80[ and ] [ NFPA 105] and t hi s speci f i cat i on. [ I ncl ude i nsul at ed cor e mat er i al s i n f i r e door s wher e i ndi cat ed i n t he door schedul e. ]

2. 7. 1 Label s

Pr ovi de f i r e door s and f r ames bear i ng t he l abel of Under wr i t er s Labor at or i es ( UL) , Fact or y Mut ual Engi neer i ng and Resear ch ( FM) , or War nock Her sey I nt er nat i onal ( WHI ) at t est i ng t o t he r at i ng r equi r ed.

Test i ng must be i n accor dance wi t h NFPA 252 or UL 10C. Pr ovi de l abel s t hat ar e met al wi t h r ai sed l et t er s, bear i ng t he name or f i l e number of t he door and f r ame manuf act ur er . Label s must be per manent l y af f i xed at t he

SECTI ON 08 11 13 Page 15 f act or y t o f r ames and t o t he hi nge edge of t he door . Do not pai nt door and l abel s.

2. 7. 2 Over si zed Door s

For f i r e door s and f r ames whi ch exceed t he si ze f or whi ch t est i ng and l abel i ng ar e avai l abl e, f ur ni sh cer t i f i cat es st at i ng t hat t he door s and f r ames ar e i dent i cal i n desi gn, mat er i al s, and const r uct i on t o a door whi ch has been t est ed and meet s t he r equi r ement s f or t he c l ass i ndi cat ed.

2. 7. 3 Ast r agal on Fi r e [ and Smoke] Door s

On pai r s of l abel ed f i r e door s, conf or m t o NFPA 80 and UL r equi r ement s. [ On smoke cont r ol door s, conf or m t o NFPA 105. ]

2. 8 EXTERI OR FRAMES

NOTE: I n l i eu of gr out i ng ext er i or f r ames whi ch i s no l onger r ecommended by SDI / Door , t he mi ni mum t hi ckness of ext er i or door f r ames r equi r ed her ei n pr ovi des secur i t y wi t hout gr out i ng t he f r ame.

Pr ovi de t her mal i nsul at i on i n al l ext er i or f r ames. Pr ovi de f r ames of a mi ni mum Level 4, wi t h f r ames of a mi ni mum t hi ckness of 1. 7 mm 0. 067 i nch, 14 gage.

2. 9 HARDWARE PREPARATI ON

Dr i l l and t ap door s and f r ames t o r ecei ve f i ni sh har dwar e. Pr epar e door s and f r ames f or har dwar e i n accor dance wi t h t he appl i cabl e r equi r ement s of SDI / DOOR A250. 8 and SDI / DOOR A250. 6. For addi t i onal r equi r ement s r ef er t o ANSI / BHMA A156. 115. Dr i l l and t ap f or sur f ace- appl i ed har dwar e at t he pr oj ect s i t e. Bui l d addi t i onal r ei nf or ci ng f or sur f ace- appl i ed har dwar e i nt o t he door at t he f act or y. Punch door f r ames[ , wi t h t he except i on of f r ames t hat wi l l have weat her st r i ppi ng [ or ] [ l i ght pr oof ] [ or ] [ soundpr oof ] gasket i ng, ] t o r ecei ve a mi ni mum of t wo r ubber or v i nyl door s i l encer s on l ock s i de of s i ngl e door s and one si l encer f or each l eaf at heads of doubl e door s. Set l ock st r i kes out t o pr ovi de cl ear ance f or s i l encer s.

2. 10 FI NI SHES

NOTE: Speci f y t he t ype f i ni sh r equi r ed f or t he t ype of st eel used f or f abr i cat i on of door s and f r ames.

Speci f y hot - di p z i nc- coat ed st eel f or ext er i or hol l ow met al door s and f r ames i n humi d l ocat i ons or pr oj ect l ocat i ons wi t h Envi r onment al Sever i t y Cl assi f i cat i ons ( ESC) of C3 t hr u C5. Al so speci f y hot - di p z i nc- coat ed st eel f or i nt er i or hol l ow met al door s and f r ames i n hi gh humi di t y bui l di ng spaces and i nt er i or door s at pr oj ect l ocat i ons wi t h ESC cl assi f i cat i ons of C4 and C5. Hugh humi di t y bui l di ng spaces i ncl ude bat hr ooms, l ocker r ooms, shower ar eas, l aundr y r ooms, pool s, and t r ai ner s.

Humi d l ocat i ons ar e t hose i n ASHRAE cl i mat e zones 0A, 1A, 2A, 3A, 3C, 4C and 5C ( as i dent i f i ed i n ASHRAE 90. 1) . See UFC 1- 200- 01 f or det er mi nat i on of

SECTI ON 08 11 13 Page 16

ESC f or pr oj ect l ocat i ons. Gal vanneal ed st eel i s sui t abl e f or i nt er i or door s and f r ames i n most bui l di ngs i n ESC l ocat i ons of C1 and C2. Unl ess f act or y f i ni sh coat i ng i s r equi r ed, speci f y f i ni sh coat i ng wi l l be appl i ed by f i el d pai nt i ng i n Sect i on

09 90 00 PAI NTS AND COATI NGS.

[ 2. 10. 1 Fact or y- Pr i med Fi ni sh

Thor oughl y c l ean al l sur f aces of door s and f r ames t hen chemi cal l y t r eat and f act or y pr i me wi t h a r ust i nhi bi t i ng coat i ng as speci f i ed i n SDI / DOOR A250. 8[ . ] [ , or pai nt abl e A25 gal vanneal ed st eel wi t hout pr i mer .

Wher e coat i ng i s r emoved by wel di ng, appl y t ouchup of f act or y pr i mer . ]

] [ 2. 10. 2 Hot - Di p Zi nc- Coat ed and Fact or y- Pr i med Fi ni sh

Fabr i cat e [ ext er i or ] [ i nt er i or ] [ schedul ed] door s and f r ames f r om hot di pped zi nc coat ed st eel , al l oyed t ype, t hat compl i es wi t h ASTM A924/ A924M and ASTM A653/ A653M. The coat i ng wei ght must meet or exceed t he mi ni mum r equi r ement s f or coat i ngs havi ng 122 gr ams per squar e met er 0. 4 ounces per squar e f oot , t ot al bot h s i des, i . e. , ZF120 A40. Repai r damaged zi nc- coat ed sur f aces by t he appl i cat i on of z i nc dust pai nt . Thor oughl y c l ean and chemi cal l y t r eat t o i nsur e maxi mum pai nt adhesi on. Fact or y pr i me as speci f i ed i n SDI / DOOR A250. 8. [ Pr ovi de f or [ ext er i or door s] [ and ] [ i nt er i or door s] [ door openi ngs No. [ _____] ] ] .

] 2. 10. 3 El ect r ol yt i c Zi nc- Coat ed Anchor s and Accessor i es

Pr ovi de el ect r ol yt i cal l y deposi t ed z i nc- coat ed st eel i n accor dance wi t h ASTM A879/ A879M, Commer ci al Qual i t y, Coat i ng Cl ass A. Phosphat e t r eat and f act or y pr i me zi nc- coat ed sur f aces as speci f i ed i n SDI / DOOR A250. 8.

[ 2. 10. 4 Fact or y- Appl i ed Enamel Fi ni sh

NOTE: Use t hi s par agr aph i f f i el d coat i ngs as speci f i ed i n Sect i on 09 90 00 PAI NTS AND COATI NGS ar e not r equi r ed or pr ovi ded. One coat of f act or y- appl i ed enamel f i ni sh i s r eadi l y avai l abl e i n st andar d col or s. Two coat s and speci al col or s add t o cost and t o del i ver y t i me.

Pr ovi de coat i ngs t hat meet t est pr ocedur es and accept ance cr i t er i a i n accor dance wi t h SDI / DOOR A250. 3. Af t er f act or y pr i mi ng, appl y [ one coat ] [ t wo coat s] of [ l ow- gl oss] [ medi um- gl oss] enamel t o exposed sur f aces.

Separ at el y bake or oven dr y each coat . Dr yi ng t i me and t emper at ur e r equi r ement s must be i n accor dance wi t h t he coat i ng manuf act ur er ' s r ecommendat i ons. Pr ovi de f i ni sh coat col or ( s) [ as i ndi cat ed] [ _____] t o mat ch appr oved col or sampl e( s) .

] 2. 11 FABRI CATI ON AND WORKMANSHI P

Pr ovi de f i ni shed door s and f r ames t hat ar e st r ong and r i gi d, neat i n appear ance, and f r ee f r om def ect s, waves, scr at ches, cut s, dent s, r i dges, hol es, war p, and buckl e. Pr ovi de mol ded member s t hat ar e c l ean cut , st r ai ght , and t r ue, wi t h j oi nt s coped or mi t er ed, wel l f or med, and i n t r ue al i gnment . Dr ess exposed wel ded and sol der ed j oi nt s smoot h. Desi gn door

SECTI ON 08 11 13 Page 17 f r ame sect i ons f or use wi t h t he wal l const r uct i on i ndi cat ed. Cor ner j oi nt s must be wel l f or med and i n t r ue al i gnment . Conceal f ast eni ngs wher e pr act i cabl e. [ Fr ames f or use i n sol i d pl ast er par t i t i ons must be wel ded const r uct i on. ] [ On wr apar ound f r ames f or masonr y par t i t i ons, pr ovi de a t hr oat openi ng 3 mm 1/ 8 i nch l ar ger t han t he act ual masonr y t hi ckness. ] [ Desi gn[ ot her ] f r ames i n exposed masonr y wal l s or par t i t i ons t o al l ow suf f i c i ent space bet ween t he i nsi de back of t r i m and masonr y t o r ecei ve caul k i ng compound. ]

2. 12 PROVI SI ONS FOR GLAZI NG

Mat er i al s ar e speci f i ed i n Sect i on 08 81 00, GLAZI NG.

PART 3 EXECUTI ON

3. 1 I NSTALLATI ON

3. 1. 1 Fr ames

Set f r ames i n accor dance wi t h SDI / DOOR A250. 11. Pl umb, al i gn, and br ace secur el y unt i l per manent anchor s ar e set . Anchor bot t oms of f r ames wi t h expansi on bol t s or powder - act uat ed f ast ener s. Bui l d i n or secur e wal l anchor s t o adj oi ni ng const r uct i on. [ Wher e f r ames r equi r e cei l i ng st r ut s or over head br aci ng, anchor f r ames t o t he st r ut s or br aci ng. ]

3. 1. 2 Door s

Hang door s i n accor dance wi t h c l ear ances speci f i ed i n SDI / DOOR A250. 8.

Af t er er ect i on and gl azi ng, c l ean and adj ust har dwar e.

3. 1. 3 Fi r e [ and Smoke] Door s and Fr ames

I nst al l f i r e door s and f r ames, i ncl udi ng har dwar e, i n accor dance wi t h NFPA 80. [ I nst al l [ f i r e r at ed] smoke door s and f r ames i n accor dance wi t h [ NFPA 80] [ and ] [ NFPA 105] . ]

3. 2 PROTECTI ON

Pr ot ect door s and f r ames f r om damage. Repai r damaged door s and f r ames pr i or t o compl et i on and accept ance of t he pr oj ect or r epl ace wi t h new, as di r ect ed. Wi r e br ush r ust ed f r ames unt i l r ust i s r emoved. Cl ean t hor oughl y. Appl y an al l - over coat of r ust - i nhi bi t i ve pai nt of t he same t ype used f or shop coat .

3. 3 CLEANI NG

Upon compl et i on, c l ean exposed sur f aces of door s and f r ames t hor oughl y.

Remove mast i c smear s and ot her unsi ght l y mar ks.

- - End of Sect i on - -

SECTI ON 08 11 13 Page 18