Vol 1 Mechanical Plans.pdf
PDF 8 MB Posted
- Solicitation number
- 25IFB16922
- Issued by
- Pennington County, South Dakota
About this file
The document is a set of architectural and mechanical engineering design drawings for the "Replace LG Cooling System - B420 - Camp Rapid" project, located in Rapid City, South Dakota, for the South Dakota National Guard. The project involves a comprehensive mechanical system replacement across multiple building floors, including basement, first, and second floor areas in two separate sections (Area A and Area B). The drawings, prepared by Skyline Engineering, detail mechanical demolition plans, mechanical plans, electrical demolition plans, and mechanical/electrical schedules for the facility. The project number is 25003/25004, with a document date of 08/27/2025, and is identified by CFMO # 467118.
The design documents include detailed technical specifications for fan coil units, pumps, transfer fans, and diffuser/register schedules. The mechanical plans show extensive piping, HVAC, and cooling system layouts with multiple technical details, including coil details, valve configurations, and system schematics. The drawings provide comprehensive engineering specifications for replacing the existing cooling infrastructure, with each floor and area meticulously mapped out to ensure a complete system replacement. The technical drawings include grid-based layouts, mechanical legends, and specific notes about installation requirements, demolition procedures, and system integration.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Vol 2 Electrical Plans.pdf | ||
| TL Invitation to Builders Exchanges.docx | DOCX document | |
| Project Manual.pdf | ||
| 467118 B420 Replace LG VRF - Add-1 - 2025-09-15.pdf | ||
| Invitation to Bid.pdf | ||
| Vol 1 Mechanical Plans.pdf | ||
| Vol 2 Electrical Plans.pdf | ||
| TL Invitation to Builders Exchanges.docx | DOCX document | |
| Project Manual.pdf | ||
| Invitation to Bid.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Replace LG Cooling System - B420 - Camp Rapid
CFMO # 467118
Camp Rapid Vicinity Map
615 12th Street Rapid City, SD 57701 Fax: 605.737.3859
Tel: 605.737.3800
PROJECT # 25003
DESIGN PROFESSIONALS INDEX TO DRAWINGS
GENERAL
COVER TITLE SHEET (INDEX, CONSULTANTS LIST)
MECHANICAL
M0.0 MECHANICAL LEGEND AND SHEET INDEX
MECHANICAL & ELECTRICAL ENGINEER:
Skyline Engineering, LLC 615 12th Street Rapid City, SD 57701 (605)737-3800 Phone (605)737-3859 Fax
ELECTRICAL
E0.0 ELECTRICAL LEGEND AND SHEET INDEX
ED1.0 BASEMENT AREA "A" ELECTRICAL DEMOLITION PLAN
ED1.1 BASEMENT AREA "B" ELECTRICAL DEMOLITION PLAN
ED1.2 FIRST FLOOR AREA "A" ELECTRICAL DEMOLITION PLAN
ED1.3 FIRST FLOOR AREA "B" ELECTRICAL DEMOLITION PLAN
ED1.4 SECOND FLOOR AREA "A" ELECTRICAL DEMOLITION PLAN
ED1.5 SECOND FLOOR AREA "B" ELECTRICAL DEMOLITION PLAN
ED1.6 ROOF AREA "A" ELECTRICAL DEMOLITION PLAN
ED1.7 ROOF AREA "B" ELECTRICAL DEMOLITION PLAN
E1.0 BASEMENT AREA "A" ELECTRICAL PLAN
E1.1 BASEMENT AREA "B" ELECTRICAL PLAN
E1.2 FIRST FLOOR AREA "A" ELECTRICAL PLAN
E1.3 FIRST FLOOR AREA "B" ELECTRICAL PLAN
E1.4 SECOND FLOOR AREA "A" ELECTRICAL PLAN
E1.5 SECOND FLOOR AREA "B" ELECTRICAL PLAN
E2.0 AFC CALCULATIONS AND PANEL SCHEDULES
E2.1 PANEL SCHEDULES
E3.0 MECHANICAL/ELECTRICAL SCHEDULES
MD3.0 AREA "A" BASEMENT MECHANICAL DEMOLITION PLAN
Project Location
MD3.1 AREA "B" BASEMENT MECHANICAL DEMOLITION PLAN
MD3.2 AREA "A" FIRST FLOOR MECHANICAL DEMOLITION PLAN
MD3.3 AREA "B" FIRST FLOOR MECHANICAL DEMOLITION PLAN
MD3.4 AREA "A" SECOND FLOOR MECHANICAL DEMOLITION PLAN
MD3.5 AREA "B" SECOND FLOOR MECHANICAL DEMOLITION PLAN
MD3.6 AREA "A" ROOF MECHANICAL DEMOLITION PLAN
MD3.7 AREA "B" ROOF MECHANICAL DEMOLITION PLAN
M3.0 AREA "A" BASEMENT MECHANICAL PLAN
M3.1 AREA "B" BASEMENT MECHANICAL PLAN
M3.2 AREA "A" FIRST FLOOR MECHANICAL PLAN
M3.3 AREA "B" FIRST FLOOR MECHANICAL PLAN
M3.4 AREA "A" SECOND FLOOR MECHANICAL PLAN
M3.5 AREA "B" SECOND FLOOR MECHANICAL PLAN
M4.0 MECHANICAL DETAILS
M5.0 MECHANICAL/ELECTRICAL SCHEDULES
R
EP
LA
C
E
LG
C O
O
LI
N G
S
YS
TE
M
-B
0- C
AM
P
R
AP
ID
SHEET TITLE
th
S tre et R ap id
C ity
, S D
Fa x:
.7
.3
Te l:
5.
7.
PROJECT NO.
REVISIONDATE
R
AP
ID
C
IT
Y, S O
U
TH
D
AK
O
TA
25004
08/27/2025DATE
DRAWN BY
CHECKED BY
SHEET NUMBER
C
FM
O
REG . NO .
HTUOS ATOKAD
GARY J. KUHL RE
EN
IG
NE
LANOISSEFORP
DERETSIGER
GSL
GJK
MECHANICAL LEGEND
AND SHEET INDEX
M0.0
AutoCAD SHX Text
CO
AutoCAD SHX Text
CARBON MONOXIDE SENSOR
AutoCAD SHX Text
NITROGEN DIOXIDE SENSOR
AutoCAD SHX Text
NO2
AutoCAD SHX Text S
AutoCAD SHX Text H
AutoCAD SHX Text P
AutoCAD SHX Text
SD
AutoCAD SHX Text T
AutoCAD SHX Text
SHEET NUMBER
AutoCAD SHX Text
DETAIL NUMBER
AutoCAD SHX Text
ANNOTATION
AutoCAD SHX Text
ECCENTRIC REDUCER
AutoCAD SHX Text
PIPE ANCHOR
AutoCAD SHX Text
FLEXIBLE CONNECTION
AutoCAD SHX Text
CONCENTRIC REDUCER
AutoCAD SHX Text
EXPANSION JOINT
AutoCAD SHX Text
ALIGNMENT GUIDE
AutoCAD SHX Text
GLOBE VALVE
AutoCAD SHX Text
PIPE PITCH (ARROW POINTS DOWNHILL)
AutoCAD SHX Text
SINGLE DUCT VAV BOX
AutoCAD SHX Text
INSERTION (DUCT/PIPE) APPLICATION
AutoCAD SHX Text
PRESSURE SWITCH - PRESSURE SENSOR
AutoCAD SHX Text
CONTROLS
AutoCAD SHX Text
THERMOSTAT - *TEMPERATURE SENSOR
AutoCAD SHX Text
SMOKE DETECTOR
AutoCAD SHX Text
OCCUPANCY SENSOR
AutoCAD SHX Text
HUMIDISTAT - HUMIDITY SENSOR
AutoCAD SHX Text
ELBOWS WITH TURNING VANES
AutoCAD SHX Text
FLEXIBLE CONNECTIONS
AutoCAD SHX Text
MANUAL VOLUME DAMPER
AutoCAD SHX Text
XX=MD, MOTORIZED DAMPER
AutoCAD SHX Text
SUPPLY DIFFUSER/REGISTER,
AutoCAD SHX Text
RETURN GRILLE/REGISTER
AutoCAD SHX Text
EXHAUST GRILLE/REGISTER
AutoCAD SHX Text
ELBOW DOWN
AutoCAD SHX Text
TEE, OUTLET UP
AutoCAD SHX Text
ELBOW UP
AutoCAD SHX Text
PIPE CAP
AutoCAD SHX Text
TEE, OUTLET DOWN
AutoCAD SHX Text
CONNECTION, BOTTOM
AutoCAD SHX Text
PIPING AND PLUMBING SYMBOLS
AutoCAD SHX Text
EXHAUST AIR
AutoCAD SHX Text
SUPPLY AIR
AutoCAD SHX Text
RETURN AIR
AutoCAD SHX Text
DUCTWORK SYMBOLS
AutoCAD SHX Text
FLEXIBLE DUCTS
AutoCAD SHX Text
BELLMOUTH BRANCH
AutoCAD SHX Text
STANDARD BRANCH, SUPPLY FLOW TO RIGHT,
AutoCAD SHX Text
RETURN/EXHAUST FLOW TO THE LEFT
AutoCAD SHX Text
GENERAL NOTES
AutoCAD SHX Text
SUBSURFACE DRAINAGE, DRAINAGE TILE
AutoCAD SHX Text
POOL DECK DRAINAGE - BELOW GRADE
AutoCAD SHX Text
REVERSE OSMOSIS WATER
AutoCAD SHX Text
DEIONIZED WATER RETURN, CIRCULATING
AutoCAD SHX Text
DOMESTIC COLD WATER
AutoCAD SHX Text
DOMESTIC HOT WATER
AutoCAD SHX Text
RECIRCULATING HOT WATER
AutoCAD SHX Text
SOFTENED COLD WATER
AutoCAD SHX Text
SOFTENED HOT WATER
AutoCAD SHX Text
DOMESTIC HOT WATER W/TEMP.
AutoCAD SHX Text
SANITARY WASTE - BELOW GRADE
AutoCAD SHX Text
CARBON DIOXIDE SENSOR
AutoCAD SHX Text
1. SYMBOLS NOT DEFINED ON THIS SHEET ARE DEFINED ELSEWHERE ON THE DRAWINGS. DEFINITIONS SYMBOLS NOT DEFINED ON THIS SHEET ARE DEFINED ELSEWHERE ON THE DRAWINGS. DEFINITIONS ELSEWHERE ON THE DRAWINGS SUPERCEDE THOSE SHOWN ON THIS SHEET. 2. DRAWINGS AND SPECIFICATIONS WERE CREATED ASSUMING INSTALLING CONTRACTOR(S) HAVE BASIC SKILLS, DRAWINGS AND SPECIFICATIONS WERE CREATED ASSUMING INSTALLING CONTRACTOR(S) HAVE BASIC SKILLS, KNOWLEDGE, EXPERIENCE AND LICENSING NECESSARY FOR SATISFACTORY COMPLETION OF THE WORK OF THIS PROJECT. IT IS EXPECTED THAT ALL FACETS OF CONSTRUCTION DELINEATED BY THE DRAWINGS AND SPECIFICATIONS WILL BE CONTINUALLY SUPERINTENDED BY PERSONNEL POSSESSING SKILLS, KNOWLEDGE, EXPERIENCE AND LICENSING COMMENSURATE WITH THE SCOPE AND COMPLEXITY OF THIS PROJECT. BY BIDDING, THE CONTRACTOR ACKNOWLEDGES THESE STATEMENTS AND ACCEPTS SOLE RESPONSIBILITY FOR DAMAGES OF ANY KIND CAUSED BY CONTRACTOR'S FAILURE TO EMPLOY AND ASSIGN PROPERLY SKILLED, KNOWLEDGEABLE, EXPERIENCED AND LICENSED PERSONNEL. 3. PROVIDE ALL MATERIALS, EQUIPMENT AND LABOR REQUIRED TO INSTALL COMPLETE AND OPERABLE PROVIDE ALL MATERIALS, EQUIPMENT AND LABOR REQUIRED TO INSTALL COMPLETE AND OPERABLE MECHANICAL SYSTEMS AS INDICATED. PROVIDE ACCESSORIES, OPTIONAL FEATURES, ATTACHMENTS, INSTALLATION TOOLS AND MATERIALS, HARDWARE, SEALANTS, ADHESIVES, AND ALL SIMILAR ITEMS, WHETHER OR NOT SPECIFICALLY INDICATED ON DRAWINGS OR IN SPECIFICATIONS, IF NECESSARY TO REALIZE THE INTENDED FUNCTION OF THE SYSTEMS INDICATED. 4. CONFLICTS BETWEEN DRAWINGS, SPECIFICATIONS, MANUFACTURER'S INSTALLATION INSTRUCTIONS, AND/OR CONFLICTS BETWEEN DRAWINGS, SPECIFICATIONS, MANUFACTURER'S INSTALLATION INSTRUCTIONS, AND/OR CODES SHALL BE BROUGHT TO THE ATTENTION OF THE ENGINEER IMMEDIATELY UPON DISCOVERY. UNLESS ADDITIONAL INSTRUCTION IS ISSUED, THE FOLLOWING ORDER OF PRECEDENCE SHALL APPLY: a. CODES CODES b. MANUFACTURER'S INSTALLATION INSTRUCTIONS MANUFACTURER'S INSTALLATION INSTRUCTIONS c. DRAWINGS DRAWINGS d. SPECIFICATIONS SPECIFICATIONS 5. THE EDITION, VERSION, REVISION, RELEASE, OR PRINTING OF CODES THAT APPLY SHALL BE AS FOLLOWS (IN THE EDITION, VERSION, REVISION, RELEASE, OR PRINTING OF CODES THAT APPLY SHALL BE AS FOLLOWS (IN ORDER OF PRECEDENCE): a. THE EDITION THAT HAS BEEN ADOPTED BY THE AUTHORITIES HAVING JURISDICTION AT THE THE EDITION THAT HAS BEEN ADOPTED BY THE AUTHORITIES HAVING JURISDICTION AT THE TIME THE BUILDING PERMIT WAS ISSUED. b. THE EDITION LISTED ON THE DRAWINGS OR IN THE SPECIFICATIONS. THE EDITION LISTED ON THE DRAWINGS OR IN THE SPECIFICATIONS. c. THE CURRENT EDITION. THE CURRENT EDITION. 6. DRAWINGS ARE REPRESENTATIVE IN NATURE AND INTENDED TO SHOW ONLY GENERAL ARRANGEMENTS AND DRAWINGS ARE REPRESENTATIVE IN NATURE AND INTENDED TO SHOW ONLY GENERAL ARRANGEMENTS AND CONFIGURATIONS RATHER THAN EXACT LAYOUT OF MECHANICAL WORK. OFFSETS, TRANSITIONS, ADAPTERS, REDUCERS, COUPLINGS AND CONNECTORS, HANGERS AND SUPPORTS, AND OTHER SUCH DETAIL ARE OMITTED FROM THE DRAWINGS FOR LEGIBILITY, BUT SHALL BE INCLUDED AS THOUGH SHOWN WHEN REQUIRED BY OTHER PORTIONS OF THE DRAWINGS OR SPECIFICATIONS. 7. DO NOT SCALE MECHANICAL DRAWINGS. TAKE MEASUREMENTS FROM ARCHITECTURAL DRAWINGS, SHOP DO NOT SCALE MECHANICAL DRAWINGS. TAKE MEASUREMENTS FROM ARCHITECTURAL DRAWINGS, SHOP DRAWINGS AND PRODUCT DATA, AND FIELD MEASUREMENTS. 8. INSTALL MECHANICAL WORK IN ACCORDANCE WITH REQUIREMENTS ENFORCED BY AUTHORITIES HAVING INSTALL MECHANICAL WORK IN ACCORDANCE WITH REQUIREMENTS ENFORCED BY AUTHORITIES HAVING JURISDICTION OVER THIS PROJECT, INCLUDING CURRENT STATE, COUNTY, MUNICIPAL AND FEDERAL CODES, LAWS, RULES, GUIDELINES, ORDINANCES, DIRECTIVES, AND STANDARDS (COLLECTIVELY “CODE” OR “CODES.”) CODE” OR “CODES.”) OR “CODES.”) CODES.”) ) 9. INSTALL EQUIPMENT AND APPURTENANCES PER MANUFACTURER'S INSTRUCTIONS, REQUIREMENTS AND INSTALL EQUIPMENT AND APPURTENANCES PER MANUFACTURER'S INSTRUCTIONS, REQUIREMENTS AND RECOMMENDATIONS, INCLUDING THOSE FOR SUPPORTS AND ANCHORS. 10. WHERE COMPONENTS OF MECHANICAL SYSTEMS REQUIRING PERIODIC ACCESS ARE CONCEALED BY WHERE COMPONENTS OF MECHANICAL SYSTEMS REQUIRING PERIODIC ACCESS ARE CONCEALED BY NON-REMOVABLE FINISHES (SUCH AS HARD CEILINGS, MASONRY WALLS, ETC.), PROVIDE ACCESS DOORS OF ADEQUATE SIZE FOR SERVICE. COORDINATE PROVISION AND INSTALLATION OF DOORS WITH GC. 11. UNLESS INDICATED OTHERWISE, INSTALL MECHANICAL SYSTEMS AND COMPONENTS CONCEALED BEHIND OR UNLESS INDICATED OTHERWISE, INSTALL MECHANICAL SYSTEMS AND COMPONENTS CONCEALED BEHIND OR WITHIN BUILDING STRUCTURE AND FINISHES. EXCEPTIONS REQUIRE WRITTEN ACCEPTANCE BY THE ENGINEER. 12. COOPERATE WITH OTHER TRADES TO ELIMINATE CONFLICTS BETWEEN MECHANICAL WORK AND THE WORK OF COOPERATE WITH OTHER TRADES TO ELIMINATE CONFLICTS BETWEEN MECHANICAL WORK AND THE WORK OF OTHER TRADES. ARRANGE WORK TO CONSERVE USEABLE SPACE IN CEILING PLENUMS, SOFFITS, CHASES, SHAFTS, AND SIMILAR VOLUMES. PROVIDE OFFSETS WHEN NECESSARY TO ACCOMMODATE THE WORK OF OTHER TRADES. WORK THAT IS NOT NEATLY AND CONCISELY ARRANGED BECAUSE OF INSUFFICIENT COORDINATION WITH OTHER TRADES IS SUBJECT TO REJECTION. 13. COORDINATE LOCATION OF CEILING-MOUNTED MECHANICAL EQUIPMENT (INCLUDING BUT NOT LIMITED TO COORDINATE LOCATION OF CEILING-MOUNTED MECHANICAL EQUIPMENT (INCLUDING BUT NOT LIMITED TO DIFFUSERS, REGISTERS AND GRILLES, FIRE SPRINKLER HEADS, AND SUSPENSION POINTS FOR BELOW-CEILING WORK) WITH CEILING-MOUNTED EQUIPMENT OF OTHER TRADES (INCLUDING BUT NOT LIMITED TO LIGHT FIXTURES, FIRE ALARM DEVICES, SPEAKERS, AND OTHER LOW-VOLTAGE SYSTEM DEVICES.) MAINTAIN SEPARATIONS REQUIRED BY EACH PIECE OF EQUIPMENT. LOCATIONS SHALL GENERALLY CORRESPOND WITH PATTERNS AS SHOWN ON ARCHITECTURAL REFLECTED CEILING PLANS; MAJOR VARIATIONS SHALL BE APPROVED BY THE ENGINEER. 14. UNLESS OTHERWISE INDICATED, PROVIDE SLEEVES AND/OR OPENINGS WHERE REQUIRED TO RUN MECHANICAL UNLESS OTHERWISE INDICATED, PROVIDE SLEEVES AND/OR OPENINGS WHERE REQUIRED TO RUN MECHANICAL WORK THROUGH WALLS, FLOORS, FOUNDATIONS, BRIDGING AND BEAMS, ETC. COORDINATE WITH GC FOR INSTALLATION OF SLEEVES FOR PENETRATING CONCRETE CONSTRUCTION PRIOR TO CONCRETE POURING. SEAL PENETRATIONS AT EXTERIOR WALLS WEATHER-TIGHT. SEAL PENETRATIONS OF FLOORS WATERTIGHT. SEAL PENETRATIONS OF INTERIOR WALLS AND CEILINGS AIRTIGHT (REGARDLESS OF ASSEMBLY'S RATINGS.) SEAL PENETRATION OF FIRE-RATED ASSEMBLIES IN ACCORDANCE WITH FIRE-RATED ASSEMBLY CATALOGED BY UL TO MATCH RATING, CONSTRUCTION MATERIALS, AND APPLICATION. 15. COORDINATE MECHANICAL WORK WITH PHASING PLANS. ARRANGE FOR EQUIPMENT AND MATERIALS TO BE ON COORDINATE MECHANICAL WORK WITH PHASING PLANS. ARRANGE FOR EQUIPMENT AND MATERIALS TO BE ON SITE WHEN NEEDED WITHOUT EXCESSIVE ON-SITE STORAGE TIME. 16. INSTALL PIPING WITH SUFFICIENT SPACE FOR INSTALLATION OF INSULATION, IF ANY. INSTALL PIPING WITH SUFFICIENT SPACE FOR INSTALLATION OF INSULATION, IF ANY. 17. INSTALL PIPING WITHOUT UNINTENDED FORCING OR SPRINGING. CONSIDER THERMAL EXPANSION FROM INSTALL PIPING WITHOUT UNINTENDED FORCING OR SPRINGING. CONSIDER THERMAL EXPANSION FROM INSTALLATION TEMPERATURE TO OPERATING TEMPERATURE WHEN MOUNTING OR HANGING PIPING SO THAT FORCES DUE TO EXPANSION ARE NEARLY NEUTRAL DURING NORMAL OPERATION. 18. INSTALL PIPING SO THAT VALVES, STRAINERS, UNIONS, TRAPS, FLANGES AND OTHER FITTINGS REQUIRING INSTALL PIPING SO THAT VALVES, STRAINERS, UNIONS, TRAPS, FLANGES AND OTHER FITTINGS REQUIRING ACCESS ARE READILY ACCESSIBLE. 19. UNLESS INDICATED OTHERWISE, PIPE UNIONS INCLUDE NOT ONLY TRADITIONAL UNIONS BUT ANY OTHER UNLESS INDICATED OTHERWISE, PIPE UNIONS INCLUDE NOT ONLY TRADITIONAL UNIONS BUT ANY OTHER EASILY-DISASSEMBLED JOINTS ALLOWED FOR PIPED MEDIA. THIS INCLUDES FLANGES AND GROOVED COUPLINGS. 20. UNIONS SHALL BE INSTALLED AT EACH CONNECTION TO EQUIPMENT, IN VALVE AND TRAP BYPASSES, AND IN UNIONS SHALL BE INSTALLED AT EACH CONNECTION TO EQUIPMENT, IN VALVE AND TRAP BYPASSES, AND IN LONG PIPING RUNS (100' OR MORE) TO PERMIT DISASSEMBLY FOR ALTERATIONS AND REPAIRS. 21. ISOLATION VALVES AND STRAINERS SHALL BE FULL SIZE OF PIPE SERVING CONNECTED EQUIPMENT, WHICH IS ISOLATION VALVES AND STRAINERS SHALL BE FULL SIZE OF PIPE SERVING CONNECTED EQUIPMENT, WHICH IS TYPICALLY SAME SIZE AS OR LARGER THAN CONNECTION SIZES ON EQUIPMENT. THIS DOES NOT APPLY TO MODULATING CONTROL VALVES, WHICH SHALL BE SIZED BASED ON PRESSURE DROP. 22. PROVIDE CLEAN OUTS IN SANITARY AND STORM DRAINAGE SYSTEMS AT ENDS OF RUNS, AT CHANGES IN PROVIDE CLEAN OUTS IN SANITARY AND STORM DRAINAGE SYSTEMS AT ENDS OF RUNS, AT CHANGES IN DIRECTION, NEAR BASE OF STACKS, EVERY 75' IN HORIZONTAL RUNS AND ELSEWHERE AS INDICATED. CLEAN OUTS SHALL BE FULL SIZE OF PIPING FOR PIPE SIZES 4” AND SMALLER AND SHALL BE 4” FOR PIPE SIZES AND SMALLER AND SHALL BE 4” FOR PIPE SIZES FOR PIPE SIZES LARGER THAN 6”. . 23. VERIFY AND COORDINATE ELEVATIONS PRIOR TO INSTALLING ANY UNDERGROUND PIPING. FIELD VERIFY VERIFY AND COORDINATE ELEVATIONS PRIOR TO INSTALLING ANY UNDERGROUND PIPING. FIELD VERIFY LOCATION AND INVERT ELEVATION OF EXISTING SANITARY AND STORM DRAINAGE PIPING. COORDINATE LOCATION AND ELEVATION OF SANITARY AND STORM DRAINAGE PIPING ENTERING BUILDING(S) WITH SITE UTILITIES CONTRACTOR. REFER TO CIVIL DRAWINGS. 24. MINIMUM GRADING FOR SANITARY SEWER LINES SHALL BE 1/8” PER FOOT (1%) FOR PIPING 4” AND LARGER, MINIMUM GRADING FOR SANITARY SEWER LINES SHALL BE 1/8” PER FOOT (1%) FOR PIPING 4” AND LARGER, PER FOOT (1%) FOR PIPING 4” AND LARGER, AND LARGER, 1/4” PER FOOT (2%) FOR PIPING SMALLER THAN 4”. PER FOOT (2%) FOR PIPING SMALLER THAN 4”. . 25. MINIMUM AIR GAP ON INDIRECT ABOVE GRADE DRAINAGE SHALL BE TWICE THE DIAMETER OF INCOMING PIPE. MINIMUM AIR GAP ON INDIRECT ABOVE GRADE DRAINAGE SHALL BE TWICE THE DIAMETER OF INCOMING PIPE. 26. PVC PIPING USED FOR SANITARY AND STORM DRAINAGE ABOVE GRADE SHALL BE INSULATED FOR SOUND PVC PIPING USED FOR SANITARY AND STORM DRAINAGE ABOVE GRADE SHALL BE INSULATED FOR SOUND CONTROL. 27. INSTALLATION OF PVC PIPING IN ENVIRONMENTAL AIR PLENUMS SHOULD BE AVOIDED. WHEN SUCH INSTALLATION OF PVC PIPING IN ENVIRONMENTAL AIR PLENUMS SHOULD BE AVOIDED. WHEN SUCH INSTALLATION IS NECESSARY, USE ALTERNATIVE PIPE MATERIALS, OR PIPING SHALL BE COMPLETELY COVERED IN PIPE COVERING SYSTEM UL-LISTED FOR THE INTENDED SERVICE. 28. MAINTAIN MINIMUM OF 4'-0” OF GROUND COVER OVER UNDERGROUND SEWER AND DRAINS. MAINTAIN MINIMUM OF 4'-0” OF GROUND COVER OVER UNDERGROUND SEWER AND DRAINS. OF GROUND COVER OVER UNDERGROUND SEWER AND DRAINS. 29. MAINTAIN MINIMUM OF 6'-0" OF GROUND COVER OVER FILLED WATER PIPING. MAINTAIN MINIMUM OF 6'-0" OF GROUND COVER OVER FILLED WATER PIPING. 30. POTABLE WATER CONNECTIONS TO PUBLIC WATER SYSTEMS SHALL INCLUDE BACKFLOW PREVENTION OF TYPE POTABLE WATER CONNECTIONS TO PUBLIC WATER SYSTEMS SHALL INCLUDE BACKFLOW PREVENTION OF TYPE SATISFYING CODE AND WATER SYSTEM'S ADMINISTRATIVE REQUIREMENTS. 31. CONNECTIONS TO POTABLE WATER SYSTEMS THAT HAVE POTENTIAL FOR BACKFLOW SHALL BE PROTECTED CONNECTIONS TO POTABLE WATER SYSTEMS THAT HAVE POTENTIAL FOR BACKFLOW SHALL BE PROTECTED WITH BACKFLOW PREVENTER(S). 32. BACKFLOW PREVENTERS SHALL BE ACCESSIBLE FOR TESTING AND SERVICE. BACKFLOW PREVENTERS SHALL BE ACCESSIBLE FOR TESTING AND SERVICE. 33. WHERE WATER SUPPLY AND/OR DRAIN PIPING IS EXPOSED BELOW LAVATORIES AND SINKS, INSULATE PIPING WHERE WATER SUPPLY AND/OR DRAIN PIPING IS EXPOSED BELOW LAVATORIES AND SINKS, INSULATE PIPING AND ACCESSORIES TO PREVENT THERMAL INJURY TO FIXTURE USERS. 34. FUEL GAS INSTALLATION SHALL COMPLY WITH NFPA 54 OR NFPA 58, AS APPLICABLE. FUEL GAS INSTALLATION SHALL COMPLY WITH NFPA 54 OR NFPA 58, AS APPLICABLE. 54 OR NFPA 58, AS APPLICABLE. 58, AS APPLICABLE. 35. INSTALL FUEL GAS PRESSURE REGULATORS IN ACCESSIBLE AND SERVICEABLE LOCATIONS. FOR INDOOR INSTALL FUEL GAS PRESSURE REGULATORS IN ACCESSIBLE AND SERVICEABLE LOCATIONS. FOR INDOOR INSTALLATIONS, PIPE VENT TO OUTDOORS (VENT RESTRICTORS MAY BE USED AT CONTRACTOR'S DISCRETION, AND IN ACCORDANCE WITH CODES.) 36. PROVIDE SHUT-OFF VALVES UPSTREAM OF FUEL GAS REGULATORS. PROVIDE SHUT-OFF VALVE, DIRT LEG AND PROVIDE SHUT-OFF VALVES UPSTREAM OF FUEL GAS REGULATORS. PROVIDE SHUT-OFF VALVE, DIRT LEG AND UNION AT FUEL GAS CONNECTIONS TO APPLIANCES. 37. DO NOT ALLOW FUEL GAS PIPING TO BE USED FOR ELECTRICAL GROUNDING. DO NOT ALLOW FUEL GAS PIPING TO BE USED FOR ELECTRICAL GROUNDING. 38. DUCTWORK INTENDED TO BE INSTALLED EXPOSED IN FINISHED SPACES WILL BE INDICATED ON DRAWINGS. DUCTWORK INTENDED TO BE INSTALLED EXPOSED IN FINISHED SPACES WILL BE INDICATED ON DRAWINGS. 39. DUCT TAKEOFFS SHALL BE HIGH EFFICIENCY TYPE UNLESS NOTED OTHERWISE. DUCT TAKEOFFS SHALL BE HIGH EFFICIENCY TYPE UNLESS NOTED OTHERWISE. 40. INSTALL MANUAL VOLUME DAMPER IN DUCT TAKEOFF TO EACH DIFFUSER, GRILLE, AND REGISTER, WHETHER INSTALL MANUAL VOLUME DAMPER IN DUCT TAKEOFF TO EACH DIFFUSER, GRILLE, AND REGISTER, WHETHER SHOWN OR NOT, IF REQUIRED TO PERMIT AIRFLOW BALANCING IN ACCORDANCE WITH SPECIFICATIONS. DAMPERS INTEGRAL TO AIR TERMINALS SATISFY THIS REQUIREMENT UNLESS A MANUAL DAMPER IN THE DUCTWORK IS SHOWN ON THE DRAWINGS. 41. UNLESS SHOWN OTHERWISE ON THE DRAWINGS, MANUAL VOLUME DAMPERS SHALL NOT BE INSTALLED IN UNLESS SHOWN OTHERWISE ON THE DRAWINGS, MANUAL VOLUME DAMPERS SHALL NOT BE INSTALLED IN INACCESSIBLE LOCATIONS, INCLUDING ABOVE NON-REMOVABLE CEILING FINISHES. WHERE INSTALLATION IN INACCESSIBLE LOCATIONS IS UNAVOIDABLE, INSTALL REMOTE DAMPER OPERATORS. CONTRACTOR MAY CHOOSE THE STYLE AND ARRANGEMENT OF THE REMOTE OPERATOR, WITHIN LIMITATIONS OF THE SPECIFICATIONS (IF ANY.) 42. SQUARE DIFFUSERS SHALL HAVE AIR VOLUME DIRECTED EQUALLY IN FOUR DIRECTIONS UNLESS INDICATED SQUARE DIFFUSERS SHALL HAVE AIR VOLUME DIRECTED EQUALLY IN FOUR DIRECTIONS UNLESS INDICATED OTHERWISE. 43. DUCT DIMENSIONS ARE CLEAR INSIDE DIMENSIONS. FOR DUCTS WITH INTERNAL INSULATION, DOUBLE WALL DUCT DIMENSIONS ARE CLEAR INSIDE DIMENSIONS. FOR DUCTS WITH INTERNAL INSULATION, DOUBLE WALL CONSTRUCTION, OR OTHER CONSTRUCTION WITH SUBSTANTIAL OVERALL DUCT WALL THICKNESS, INCREASE SIZE OF OUTER DUCT ACCORDINGLY. 44. VERIFY ADEQUATE AIR PATH IN AIR PLENUMS SHARED WITH OTHER BUILDING FEATURES, SUCH AS CEILING VERIFY ADEQUATE AIR PATH IN AIR PLENUMS SHARED WITH OTHER BUILDING FEATURES, SUCH AS CEILING PLENUMS, UNDERFLOOR PLENUMS, CHASES AND SHAFTS.
AutoCAD SHX Text
MECHANICAL LEGEND AND SHEET INDEX
AutoCAD SHX Text M0.0
AutoCAD SHX Text
HUMIDIFIER
AutoCAD SHX Text
HEATER
AutoCAD SHX Text
HEATING
AutoCAD SHX Text
HEATING, VENTILATION, AIR CONDITIONING
AutoCAD SHX Text
HEAT EXCHANGER
AutoCAD SHX Text
KILOWATT (WATT X 1000)
AutoCAD SHX Text
INSULATION
AutoCAD SHX Text
INVERT
AutoCAD SHX Text
HOT WATER
AutoCAD SHX Text
HYDRANT
AutoCAD SHX Text
LEAVING AIR TEMPERATURE
AutoCAD SHX Text
LIGHT HAZARD
AutoCAD SHX Text
NOISE CRITERIA
AutoCAD SHX Text
MANHOLE
AutoCAD SHX Text
LAVATORY
AutoCAD SHX Text
CUBIC FEET X 1000
AutoCAD SHX Text
LEAVING WATER TEMPERATURE
AutoCAD SHX Text
BTU PER HOUR (THOUSANDS)
AutoCAD SHX Text
MAKE-UP AIR UNIT
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
OUTSIDE AIR
AutoCAD SHX Text
NEGATIVE
AutoCAD SHX Text
OPPOSED BLADE DAMPER
AutoCAD SHX Text
NORMALLY CLOSED
AutoCAD SHX Text
NORMALLY OPEN
AutoCAD SHX Text
NOT IN CONTRACT
AutoCAD SHX Text
PRIMARY AIR
AutoCAD SHX Text
PRESSURE DROP OR DIFFERENCE
AutoCAD SHX Text
OVERFLOW ROOF DRAIN
AutoCAD SHX Text
PNEUMATIC TO ELECTRIC
AutoCAD SHX Text ORDINARY HAZARD, GROUP x
AutoCAD SHX Text
RETURN AIR
AutoCAD SHX Text
POUNDS PER SQUARE INCH, ABSOLUTE
AutoCAD SHX Text
POUNDS PER SQUARE INCH, GAUGE
AutoCAD SHX Text
POLY-VINYL CHLORIDE PLASTIC
AutoCAD SHX Text
RADIATOR/RADIANT HEATER
AutoCAD SHX Text
RETURN FAN
AutoCAD SHX Text
REHEAT COIL
AutoCAD SHX Text
RECIRCULATING
AutoCAD SHX Text
REHEAT
AutoCAD SHX Text
RETURN
AutoCAD SHX Text
ROOF DRAIN
AutoCAD SHX Text
RELATIVE HUMIDITY
AutoCAD SHX Text
REINFORCED CONCRETE PIPE
AutoCAD SHX Text
PLUMBING
AutoCAD SHX Text
SANITARY
AutoCAD SHX Text
ROOF TOP UNIT
AutoCAD SHX Text
SUPPLY AIR
AutoCAD SHX Text
ROOM
AutoCAD SHX Text
CFM AT STANDARD TEMP AND PRESS
AutoCAD SHX Text
RECIRCULATED HOT WATER
AutoCAD SHX Text
REVOLUTIONS PER MINUTE
AutoCAD SHX Text
SPECIFICATIONS
AutoCAD SHX Text
SMOKE DAMPER
AutoCAD SHX Text
SQUARE
AutoCAD SHX Text
SUPPLY
AutoCAD SHX Text
SUPPLY (PRESSURIZATION) FAN
AutoCAD SHX Text
STATIC PRESSURE
AutoCAD SHX Text
STORAGE TANK
AutoCAD SHX Text
TEMPERATURE
AutoCAD SHX Text
TYPICAL
AutoCAD SHX Text
THERMOSTAT
AutoCAD SHX Text
STEAM
AutoCAD SHX Text
TONS OF REFRIGERATION
AutoCAD SHX Text
TEMPERATURE DROP OR DIFFERENCE
AutoCAD SHX Text
UNDERGROUND
AutoCAD SHX Text
VENT (SANITARY)
AutoCAD SHX Text
UNIT HEATER
AutoCAD SHX Text
VELOCITY
AutoCAD SHX Text
URINAL
AutoCAD SHX Text
VARIABLE AIR VOLUME
AutoCAD SHX Text
VOLUME DAMPER
AutoCAD SHX Text
ULTRAVIOLET LIGHT
AutoCAD SHX Text
REDUCED ZONE BACKFLOW PREVENTER
AutoCAD SHX Text
WITHOUT
AutoCAD SHX Text
WATER CLOSET
AutoCAD SHX Text
SANITARY WASTE
AutoCAD SHX Text
VOLUME
AutoCAD SHX Text
WINDOW AIR CONDITIONER
AutoCAD SHX Text
VARIABLE FREQUENCY DRIVE
AutoCAD SHX Text
WATER
AutoCAD SHX Text
WATER SOFTENER
AutoCAD SHX Text
WALL CLEAN OUT
AutoCAD SHX Text
TEMP
AutoCAD SHX Text
GPM
AutoCAD SHX Text
HD
AutoCAD SHX Text
HOA
AutoCAD SHX Text
GR
AutoCAD SHX Text
HB
AutoCAD SHX Text
GPH
AutoCAD SHX Text
FPS
AutoCAD SHX Text
FV
AutoCAD SHX Text
GA
AutoCAD SHX Text F&T
AutoCAD SHX Text
FTG
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FS
AutoCAD SHX Text
FT
AutoCAD SHX Text
FP
AutoCAD SHX Text
FPM
AutoCAD SHX Text
GAL
AutoCAD SHX Text
GCO
AutoCAD SHX Text W
AutoCAD SHX Text
GRILLE
AutoCAD SHX Text
GALLONS PER MINUTE
AutoCAD SHX Text
GALLONS PER HOUR
AutoCAD SHX Text
HOSE BIBB
AutoCAD SHX Text
HEAD
AutoCAD SHX Text
HAND-OFF-AUTOMATIC
AutoCAD SHX Text
WITH
AutoCAD SHX Text W/O
AutoCAD SHX Text
WC
AutoCAD SHX Text
WAC
AutoCAD SHX Text W/
AutoCAD SHX Text
WS
AutoCAD SHX Text
WTR
AutoCAD SHX Text
WCO
AutoCAD SHX Text
FIRE PUMP
AutoCAD SHX Text
FEET PER SECOND
AutoCAD SHX Text
FLOOR SINK
AutoCAD SHX Text
FEET PER MINUTE
AutoCAD SHX Text
FOOTING
AutoCAD SHX Text
GAUGE
AutoCAD SHX Text
FACE VELOCITY
AutoCAD SHX Text
FOOT OR FEET
AutoCAD SHX Text
GALLON, US STANDARD
AutoCAD SHX Text
GRADE CLEANOUT
AutoCAD SHX Text
FIRE/SMOKE DAMPER
AutoCAD SHX Text
FINNED TUBE HEATER
AutoCAD SHX Text
FLOAT AND THERMOSTATIC
AutoCAD SHX Text
TYP
AutoCAD SHX Text
TONS
AutoCAD SHX Text
T-STAT
AutoCAD SHX Text
VD
AutoCAD SHX Text
VEL
AutoCAD SHX Text
UV
AutoCAD SHX Text V
AutoCAD SHX Text
UR
AutoCAD SHX Text
VAV
AutoCAD SHX Text
UG
AutoCAD SHX Text
UH
AutoCAD SHX Text
VFD
AutoCAD SHX Text
VOL
AutoCAD SHX Text
INSUL
AutoCAD SHX Text
BELOW GRADE
AutoCAD SHX Text
BG
AutoCAD SHX Text
FC
AutoCAD SHX Text
FCO
AutoCAD SHX Text
FCU
AutoCAD SHX Text
FD
AutoCAD SHX Text
EXH
AutoCAD SHX Text F
AutoCAD SHX Text
EXP
AutoCAD SHX Text
EWC
AutoCAD SHX Text
EWT
AutoCAD SHX Text
FLR
AutoCAD SHX Text
FLEX
AutoCAD SHX Text
EM
AutoCAD SHX Text
EAT
AutoCAD SHX Text
EF
AutoCAD SHX Text
DWG
AutoCAD SHX Text (E)
AutoCAD SHX Text
EA
AutoCAD SHX Text
DN
AutoCAD SHX Text
DR
AutoCAD SHX Text
DS
AutoCAD SHX Text
ELV
AutoCAD SHX Text
FIRE DAMPER
AutoCAD SHX Text
EXHAUST
AutoCAD SHX Text
EXPANSION
AutoCAD SHX Text
FAHRENHEIT (WITH OR WITHOUT %%D)
AutoCAD SHX Text
FLUID COOLER
AutoCAD SHX Text
FLOOR CLEAN OUT
AutoCAD SHX Text
FAN COIL UNIT
AutoCAD SHX Text
FLOOR
AutoCAD SHX Text
FLEXIBLE
AutoCAD SHX Text
ELECTRIC WATER COOLER
AutoCAD SHX Text
ENTERING WATER TEMPERATURE
AutoCAD SHX Text
SAN
AutoCAD SHX Text
SCFM
AutoCAD SHX Text
RPZ
AutoCAD SHX Text
RTU
AutoCAD SHX Text
SA
AutoCAD SHX Text
SUP
AutoCAD SHX Text
SQ
AutoCAD SHX Text
SF
AutoCAD SHX Text
SP
AutoCAD SHX Text
SPECS
AutoCAD SHX Text
SD
AutoCAD SHX Text
TD
AutoCAD SHX Text
ST
AutoCAD SHX Text
STM
AutoCAD SHX Text
CIRCULATING PUMP (DOMESTIC)
AutoCAD SHX Text
DOWN
AutoCAD SHX Text
DRAIN
AutoCAD SHX Text
DOWNSPOUT
AutoCAD SHX Text
DRAWING(S)
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
EXHAUST AIR
AutoCAD SHX Text
ELEVATOR
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
ENTERING AIR TEMPERATURE
AutoCAD SHX Text
RAD
AutoCAD SHX Text
PSIG
AutoCAD SHX Text
PVC
AutoCAD SHX Text
RA
AutoCAD SHX Text
RHT
AutoCAD SHX Text
RHC
AutoCAD SHX Text
RF
AutoCAD SHX Text
RET
AutoCAD SHX Text
RH
AutoCAD SHX Text
RD
AutoCAD SHX Text
RECIRC
AutoCAD SHX Text
RCP
AutoCAD SHX Text
RPM
AutoCAD SHX Text
RHW
AutoCAD SHX Text
RM
AutoCAD SHX Text
DF
AutoCAD SHX Text DB(dB)
AutoCAD SHX Text
CUH
AutoCAD SHX Text
CW
AutoCAD SHX Text
CONTR
AutoCAD SHX Text
CONV
AutoCAD SHX Text
DIFF
AutoCAD SHX Text
DISCH
AutoCAD SHX Text
DIA
AutoCAD SHX Text
CFM
AutoCAD SHX Text
CH
AutoCAD SHX Text
CCF
AutoCAD SHX Text
CFH
AutoCAD SHX Text BTU(Btu)
AutoCAD SHX Text
CLG
AutoCAD SHX Text
COND
AutoCAD SHX Text
CL
AutoCAD SHX Text
CONTRACTOR
AutoCAD SHX Text
CONVECTOR
AutoCAD SHX Text
COLD WATER
AutoCAD SHX Text
DECIBEL
AutoCAD SHX Text
DRINKING FOUNTAIN
AutoCAD SHX Text
CABINET UNIT HEATER
AutoCAD SHX Text
DIFFUSER
AutoCAD SHX Text
DISCHARGE
AutoCAD SHX Text
DIAMETER
AutoCAD SHX Text
OA
AutoCAD SHX Text
OBD
AutoCAD SHX Text
NTS
AutoCAD SHX Text
PD
AutoCAD SHX Text P-E
AutoCAD SHX Text
ORD
AutoCAD SHX Text
PA
AutoCAD SHX Text OHx
AutoCAD SHX Text
PSIA
AutoCAD SHX Text
PLBG
AutoCAD SHX Text
BRITISH THERMAL UNIT
AutoCAD SHX Text
CHILLER
AutoCAD SHX Text
CUBIC FEET X 100
AutoCAD SHX Text
CUBIC FEET PER HOUR
AutoCAD SHX Text
CUBIC FEET PER MINUTE
AutoCAD SHX Text
CENTER LINE
AutoCAD SHX Text
CEILING
AutoCAD SHX Text
CONDENSE, CONDENSER, CONDENSATE
AutoCAD SHX Text KW(kW)
AutoCAD SHX Text
LAT
AutoCAD SHX Text
INV
AutoCAD SHX Text
MAU
AutoCAD SHX Text
NC
AutoCAD SHX Text
LWT
AutoCAD SHX Text
MBH
AutoCAD SHX Text
MCF
AutoCAD SHX Text
MH
AutoCAD SHX Text
LH
AutoCAD SHX Text
LAV
AutoCAD SHX Text
NIC
AutoCAD SHX Text
NO
AutoCAD SHX Text
NC
AutoCAD SHX Text
NEG
AutoCAD SHX Text
AD
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AFF
AutoCAD SHX Text
AS
AutoCAD SHX Text
ARCH
AutoCAD SHX Text
MECHANICAL ABBREVIATIONS
AutoCAD SHX Text
ABOVE FINISHED FLOOR
AutoCAD SHX Text
ACCESS DOOR
AutoCAD SHX Text
AIR HANDLING UNIT
AutoCAD SHX Text
ARCHITECT
AutoCAD SHX Text
AIR SEPARATOR
AutoCAD SHX Text
HX
AutoCAD SHX Text
HTR
AutoCAD SHX Text
HVAC
AutoCAD SHX Text
HUM
AutoCAD SHX Text
HTG
AutoCAD SHX Text
HYD
AutoCAD SHX Text
HW
AutoCAD SHX Text
COTG
AutoCAD SHX Text
CLEAN OUT TO GRADE
AutoCAD SHX Text
EC
AutoCAD SHX Text
ELECTRICAL CONTRACTOR
AutoCAD SHX Text
ELEC
AutoCAD SHX Text
ELECTRICAL
AutoCAD SHX Text
MECHANICAL CONTRACTOR
AutoCAD SHX Text
MC
AutoCAD SHX Text
PLUMBING/PIPING CONTRACTOR
AutoCAD SHX Text
PC
AutoCAD SHX Text
CPVC
AutoCAD SHX Text
CHLORINATED PVC PLASTIC
AutoCAD SHX Text
FPC
AutoCAD SHX Text
FLAT PLATE CONVECTOR
AutoCAD SHX Text
GC
AutoCAD SHX Text
GENERAL CONTRACTOR
AutoCAD SHX Text
TEMPERATURE CONTROL
AutoCAD SHX Text
TC
AutoCAD SHX Text
VENT THROUGH ROOF (SANITARY)
AutoCAD SHX Text
VTR
AutoCAD SHX Text C
AutoCAD SHX Text
CELSIUS
AutoCAD SHX Text
APD
AutoCAD SHX Text
AIR PRESS DROP OR DIFFERENCE
AutoCAD SHX Text
WPD
AutoCAD SHX Text
WATER PRESS DROP OR DIFFERENCE
AutoCAD SHX Text
PRESS
AutoCAD SHX Text
PRESSURE
AutoCAD SHX Text
PRESSURE REDUCING VALVE
AutoCAD SHX Text
PRV
AutoCAD SHX Text
POWER ROOF VENTILATOR
AutoCAD SHX Text
PRV
AutoCAD SHX Text
MVP
AutoCAD SHX Text
MAC
AutoCAD SHX Text
MEDICAL VACUUM PUMP
AutoCAD SHX Text
MEDICAL AIR COMPRESSOR
AutoCAD SHX Text
AC
AutoCAD SHX Text
AC
AutoCAD SHX Text
AIR COMPRESSOR
AutoCAD SHX Text
AIR CONDITIONER(ING)
AutoCAD SHX Text
ACC
AutoCAD SHX Text
ACC
AutoCAD SHX Text
AIR COOLED CONDENSOR
AutoCAD SHX Text
AIR COOLED CONDENSING UNIT
AutoCAD SHX Text
CAR
AutoCAD SHX Text
CONSTANT AIRFLOW REGULATOR
AutoCAD SHX Text
TR
AutoCAD SHX Text
TONS REFRIGERATION
AutoCAD SHX Text
GEN
AutoCAD SHX Text
ENGINE GENERATOR (ELECTRICAL)
AutoCAD SHX Text
ET
AutoCAD SHX Text
EXPANSION TANK
AutoCAD SHX Text
UNIT VENTILATOR
AutoCAD SHX Text
UV
AutoCAD SHX Text
WATER HEATER
AutoCAD SHX Text
WALL HYDRANT
AutoCAD SHX Text
WH
AutoCAD SHX Text
WH
AutoCAD SHX Text
DCP
AutoCAD SHX Text
ELV
AutoCAD SHX Text
ELEVATION
AutoCAD SHX Text
FC
AutoCAD SHX Text
FORWARD CURVED (FAN WHEEL)
AutoCAD SHX Text
BACKWARDS INCLINED (FAN WHEEL)
AutoCAD SHX Text
BI
AutoCAD SHX Text
AF
AutoCAD SHX Text
AIR FOIL (FAN WHEEL)
AutoCAD SHX Text
FP
AutoCAD SHX Text
FIRE PROTECTION
AutoCAD SHX Text
FA
AutoCAD SHX Text
FIRE ALARM
AutoCAD SHX Text
FD
AutoCAD SHX Text
FLOOR DRAIN
AutoCAD SHX Text
FT
AutoCAD SHX Text
YARD HYDRANT
AutoCAD SHX Text
YH
AutoCAD SHX Text R-x
AutoCAD SHX Text
RETURN GRILLE OR REGISTER
AutoCAD SHX Text S-x
AutoCAD SHX Text
SUPPLY GRILLE OR REGISTER
AutoCAD SHX Text E-x
AutoCAD SHX Text
EXHAUST GRILLE
AutoCAD SHX Text T-x
AutoCAD SHX Text
TRANSFER GRILLE
AutoCAD SHX Text
TRANS
AutoCAD SHX Text
TRANSFER
AutoCAD SHX Text
NPW
AutoCAD SHX Text
NON-POTABLE WATER
AutoCAD SHX Text
PG
AutoCAD SHX Text
PROPYLENE GLYCOL ANTIFREEZE
AutoCAD SHX Text EHx
AutoCAD SHX Text EXTRA HAZARD, GROUP x
AutoCAD SHX Text
INVERT ELEVATION
AutoCAD SHX Text
IE
AutoCAD SHX Text
PRESSURE RELIEF VALVE
AutoCAD SHX Text
PRV
AutoCAD SHX Text
POUNDS PER SQUARE INCH
AutoCAD SHX Text
PSI
AutoCAD SHX Text
TRANS
AutoCAD SHX Text
TRANSITION
AutoCAD SHX Text
ESP
AutoCAD SHX Text
EXTERNAL STATIC PRESSURE
AutoCAD SHX Text
TSP
AutoCAD SHX Text
TOTAL STATIC PRESSURE
AutoCAD SHX Text
WG
AutoCAD SHX Text
WATER GAUGE
AutoCAD SHX Text
VAR
AutoCAD SHX Text
VARIABLE
AutoCAD SHX Text
VARIABLE REFRIGERANT FLOW
AutoCAD SHX Text
VRF
AutoCAD SHX Text
REFRIGERANT, REFRIGERATION
AutoCAD SHX Text
REFR
AutoCAD SHX Text
CV
AutoCAD SHX Text
CONSTANT VOLUMETRIC FLOW
AutoCAD SHX Text
ASSEMBLY
AutoCAD SHX Text
ASS'Y
AutoCAD SHX Text
GR
AutoCAD SHX Text
GRAINS (WEIGHT)
AutoCAD SHX Text
CONNECTION, SIDE OR NON-SPECIFIC
AutoCAD SHX Text
BREAK LINE/CONTINUATION
AutoCAD SHX Text
FLOW DIRECTION
AutoCAD SHX Text
PIPE UNION
AutoCAD SHX Text
PIPE FLANGES
AutoCAD SHX Text
SHUTOFF VALVE (SEE SPEC FOR TYPE)
AutoCAD SHX Text
WYE STRAINER
AutoCAD SHX Text
WYE STRAINER W/ BLOWDOWN VALVE
AutoCAD SHX Text
DUPLEX BASKET STRAINER
AutoCAD SHX Text
PUMP
AutoCAD SHX Text
BALL VALVE
AutoCAD SHX Text
BUTTERFLY VALVE
AutoCAD SHX Text
ANGLE GLOBE VALVE
AutoCAD SHX Text
PLUG VALVE OR GAS COCK
AutoCAD SHX Text
GATE VALVE
AutoCAD SHX Text
GATE VALVE, OS&Y
AutoCAD SHX Text
CHECK VALVE (DIRECTION INDICATED)
AutoCAD SHX Text
PRESSURE REDUCING/CONTROL VALVE
AutoCAD SHX Text
GAS PRESSURE REGULATOR
AutoCAD SHX Text
MANUAL BALANCING VALVE
AutoCAD SHX Text
AUTOMATIC FLOW CONTROL VALVE
AutoCAD SHX Text
GENERIC AUTO CONTROL VALVE, 2-WAY
AutoCAD SHX Text
GENERIC AUTO CONTROL VALVE, 3-WAY
AutoCAD SHX Text
MOTORIZED AUTO CONTROL VALVE
AutoCAD SHX Text M
AutoCAD SHX Text
SOLENOID CONTROL VALVE
AutoCAD SHX Text S
AutoCAD SHX Text
PRESSURE/TEMPERATURE SAFETY VALVE
AutoCAD SHX Text
AIR VENTS, AUTOMATIC AND MANUAL
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text
BOILER DRAIN W/ CAP
AutoCAD SHX Text
HOSE END DRAIN VALVE W/ CAP
AutoCAD SHX Text
PRESS/TEMP TEST PORT ("PETE'S PLUG")
AutoCAD SHX Text
INSERTION TEMP SENSOR OR AQUASTAT
AutoCAD SHX Text T
AutoCAD SHX Text
FLOW SWITCH OR SENSOR
AutoCAD SHX Text
FS
AutoCAD SHX Text
PRESSURE SWITCH OR SENSOR
AutoCAD SHX Text
PS
AutoCAD SHX Text
FLOW METER, ELECTRONIC
AutoCAD SHX Text
FLOW METER, MECHANICAL OR GENERIC
AutoCAD SHX Text
BACKFLOW ASS'Y, DOUBLE CHECK
AutoCAD SHX Text
BACKFLOW ASS'Y, REDUCED PRESSURE ZONE
AutoCAD SHX Text
WATER HAMMER ARRESTER ASS'Y
AutoCAD SHX Text
PRESSURE GAUGE ASS'Y, GENERAL SERVICE
AutoCAD SHX Text
PRESSURE GAUGE ASS'Y, STEAM SERVICE
AutoCAD SHX Text
THERMOMETER IN THERMOWELL
AutoCAD SHX Text
THERMOWELL ONLY
AutoCAD SHX Text
REFRIGERANT SIGHT GLASS
AutoCAD SHX Text
REFRIGERANT FILTER/DRYER
AutoCAD SHX Text
WALL HYDRANT
AutoCAD SHX Text
HOSE BIBB
AutoCAD SHX Text
WH
AutoCAD SHX Text
HB
AutoCAD SHX Text
CLEANOUT ON PIPE
AutoCAD SHX Text
WALL CLEANOUT
AutoCAD SHX Text
FLOOR CLEANOUT
AutoCAD SHX Text
CO
AutoCAD SHX Text
CO
AutoCAD SHX Text
FCO
AutoCAD SHX Text
BACKWATER VALVE
AutoCAD SHX Text
FLOOR DRAIN
AutoCAD SHX Text %%UFD-x
AutoCAD SHX Text
FLOOR SINK
AutoCAD SHX Text %%UFS-x
AutoCAD SHX Text
CLEANOUT TO GRADE
AutoCAD SHX Text
COTG
AutoCAD SHX Text
ROOF DRAIN
AutoCAD SHX Text
OVERFLOW ROOF DRAIN
AutoCAD SHX Text
DRAIN ABOVE
AutoCAD SHX Text %%URD-x
AutoCAD SHX Text %%UORD-x
AutoCAD SHX Text
CATCH BASIN, MANHOLE
AutoCAD SHX Text
CURB STOP, VALVE BOX
AutoCAD SHX Text
STEAM TRAP, GENERIC
AutoCAD SHX Text H
AutoCAD SHX Text P
AutoCAD SHX Text T
AutoCAD SHX Text
CO2
AutoCAD SHX Text
THERMOWELL APPLICATION
AutoCAD SHX Text
PRESSURE DIFFERENTIAL APPLICATION
AutoCAD SHX Text P
AutoCAD SHX Text P
AutoCAD SHX Text
SATURATED STEAM TEMPERATURE
AutoCAD SHX Text
SST
AutoCAD SHX Text
SATURATED STEAM PRESSURE
AutoCAD SHX Text
SSP
AutoCAD SHX Text
RISING STEM
AutoCAD SHX Text
RS
AutoCAD SHX Text
NON-RISING STEM
AutoCAD SHX Text
NRS
AutoCAD SHX Text
NOMINAL PIPE SIZE
AutoCAD SHX Text
NPS
AutoCAD SHX Text
IRON PIPE SIZE
AutoCAD SHX Text
IPS
AutoCAD SHX Text
CTS
AutoCAD SHX Text
COPPER TUBE SIZE
AutoCAD SHX Text
SIMILAR
AutoCAD SHX Text
SIM
AutoCAD SHX Text
OPPOSITE
AutoCAD SHX Text
OPP
AutoCAD SHX Text
EG
AutoCAD SHX Text
ETHYLENE GLYCOL ANTIFREEZE
AutoCAD SHX Text
DEGREES
AutoCAD SHX Text %%D
AutoCAD SHX Text
DIAMETER
AutoCAD SHX Text %%C
AutoCAD SHX Text
PLUS OR MINUS
AutoCAD SHX Text %%P
AutoCAD SHX Text
CENTERLINE
AutoCAD SHX Text C
AutoCAD SHX Text L
AutoCAD SHX Text
CLG
AutoCAD SHX Text
COOLING
AutoCAD SHX Text
CONV
AutoCAD SHX Text
CON'T
AutoCAD SHX Text
CONVECTOR, CONVECTION
AutoCAD SHX Text
CONVECTOR
AutoCAD SHX Text
CW
AutoCAD SHX Text
COLD WORKING PRESSURE (AT 100F)
AutoCAD SHX Text
TOTAL DYNAMIC HEAD
AutoCAD SHX Text
TDH
AutoCAD SHX Text E-P
AutoCAD SHX Text
ELECTRIC TO PNEUMATIC
AutoCAD SHX Text
SCW
AutoCAD SHX Text
SHW
AutoCAD SHX Text
AutoCAD SHX Text
SRW
AutoCAD SHX Text
RECIRCULATING SOFTENED HOT WATER
AutoCAD SHX Text
RO
AutoCAD SHX Text
DI
AutoCAD SHX Text
DEIONIZED WATER
AutoCAD SHX Text
DEIONIZED WATER SUPPLY, CIRCULATING
AutoCAD SHX Text
DIS
AutoCAD SHX Text
DIR
AutoCAD SHX Text W
AutoCAD SHX Text W
AutoCAD SHX Text
SANITARY WASTE - ABOVE GRADE
AutoCAD SHX Text
SANITARY VENT
AutoCAD SHX Text V
AutoCAD SHX Text
STORM DRAIN - BELOW GRADE
AutoCAD SHX Text
STORM DRAIN - ABOVE GRADE
AutoCAD SHX Text
SD
AutoCAD SHX Text
SD
AutoCAD SHX Text
OVERFLOW STORM DRAIN - BELOW GRADE
AutoCAD SHX Text
OVERFLOW STORM DRAIN - ABOVE GRADE
AutoCAD SHX Text
OSD
AutoCAD SHX Text
OSD
AutoCAD SHX Text
DT
AutoCAD SHX Text
DD
AutoCAD SHX Text
ACID WASTE - BELOW GRADE
AutoCAD SHX Text
ACID WASTE - ABOVE GRADE
AutoCAD SHX Text
ACID VENT
AutoCAD SHX Text
AW
AutoCAD SHX Text
AW
AutoCAD SHX Text
AV
AutoCAD SHX Text
GREASE WASTE - BELOW GRADE
AutoCAD SHX Text
GREASE WASTE - ABOVE GRADE
AutoCAD SHX Text
GW
AutoCAD SHX Text
GW
AutoCAD SHX Text
NATURAL GAS, SINGLE PRESSURE
AutoCAD SHX Text G
AutoCAD SHX Text
NATURAL GAS, PRESSURE AT X PSIG
AutoCAD SHX Text X#G
AutoCAD SHX Text
NATURAL GAS, INTERRUPTABLE
AutoCAD SHX Text
NATURAL GAS, FIRM
AutoCAD SHX Text G(I)
AutoCAD SHX Text G(F)
AutoCAD SHX Text
LIQUEFIED PETROLEUM GAS
AutoCAD SHX Text
LPG
AutoCAD SHX Text
FUEL OIL SUPPLY
AutoCAD SHX Text
FOS
AutoCAD SHX Text
FUEL OIL SUPPLY
AutoCAD SHX Text
FOR
AutoCAD SHX Text
FUEL OIL VENT
AutoCAD SHX Text
FUEL OIL FILL
AutoCAD SHX Text
FOF
AutoCAD SHX Text
FOV
AutoCAD SHX Text
CHILLED WATER SUPPLY
AutoCAD SHX Text
CHILLED WATER RETURN
AutoCAD SHX Text
CHS
AutoCAD SHX Text
CHR
AutoCAD SHX Text
CONDENSER WATER SUPPLY
AutoCAD SHX Text
CONDENSER WATER RETURN
AutoCAD SHX Text
CDS
AutoCAD SHX Text
CDR
AutoCAD SHX Text
HEATING WATER SUPPLY
AutoCAD SHX Text
HEATING WATER RETURN
AutoCAD SHX Text
HWS
AutoCAD SHX Text
HWR
AutoCAD SHX Text
SNOW MELT SUPPLY
AutoCAD SHX Text
SNOW MELT RETURN
AutoCAD SHX Text
SMS
AutoCAD SHX Text
SMR
AutoCAD SHX Text
RADIANT FLOOR SUPPLY
AutoCAD SHX Text
RADIANT FLOOR RETURN
AutoCAD SHX Text
RFR
AutoCAD SHX Text
RFS
AutoCAD SHX Text
STEAM, SINGLE PRESSURE
AutoCAD SHX Text
STEAM CONDENSATE, SINGLE PRESSURE
AutoCAD SHX Text
STEAM, PRESSURE AT X PSIG
AutoCAD SHX Text
STEAM CONDENSATE, FROM X PSIG STEAM
AutoCAD SHX Text
NON-POTABLE WATER
AutoCAD SHX Text
POTABLE WATER
AutoCAD SHX Text
IRRIGATION
AutoCAD SHX Text
INDUSTRIAL WATER (PLANT WATER)
AutoCAD SHX Text
IR
AutoCAD SHX Text
IW
AutoCAD SHX Text
NP
AutoCAD SHX Text
PW
AutoCAD SHX Text
STM
AutoCAD SHX Text C
AutoCAD SHX Text
X#STM
AutoCAD SHX Text X#C
AutoCAD SHX Text
PUMPED STEAM CONDENSATE
AutoCAD SHX Text
BOILER FEEDWATER
AutoCAD SHX Text
PC
AutoCAD SHX Text
BF
AutoCAD SHX Text
REFRIGERANT LIQUID
AutoCAD SHX Text
REFRIGERANT SUCTION
AutoCAD SHX Text
REFRIGERANT HOT GAS
AutoCAD SHX Text
RL
AutoCAD SHX Text
RS
AutoCAD SHX Text
RHG
AutoCAD SHX Text
AIR CONDITIONING CONDENSATE DRAIN
AutoCAD SHX Text
COMPRESSED AIR, SINGLE PRESSURE
AutoCAD SHX Text
CD
AutoCAD SHX Text A
AutoCAD SHX Text
COMPRESSED AIR, AT X PSIG
AutoCAD SHX Text X#A
AutoCAD SHX Text
PRESSURE RELIEF VALVE
AutoCAD SHX Text Y
AutoCAD SHX Text X
AutoCAD SHX Text Y
AutoCAD SHX Text X
AutoCAD SHX Text
SHEET NUMBER
AutoCAD SHX Text
SECTION OR ELEVATION NUMBER
AutoCAD SHX Text X
AutoCAD SHX Text Y
AutoCAD SHX Text
DESIGN AIRFLOW
AutoCAD SHX Text
D/R/G TYPE AND IDENTIFIER
AutoCAD SHX Text
DIRECTION OF VIEW
AutoCAD SHX Text
DETAIL OR PLAN CALL-OUT
AutoCAD SHX Text
SECTION OR ELEVATION CALL-OUT
AutoCAD SHX Text
DIFFUSER/REGISTER/GRILLE IDENTIFICATION
AutoCAD SHX Text X
AutoCAD SHX Text Y
AutoCAD SHX Text
UNIQUE IDENTIFIER
AutoCAD SHX Text
EQUIPMENT TYPE
AutoCAD SHX Text
EQUIPMENT IDENTIFICATION
AutoCAD SHX Text
KEYED NOTE
AutoCAD SHX Text X
AutoCAD SHX Text
NOTE IDENTIFIER
AutoCAD SHX Text
*ALSO USED FOR ELECTRONIC T-STATS
AutoCAD SHX Text
XX
AutoCAD SHX Text
AutoCAD SHX Text
XX=FD, FIRE DAMPER
AutoCAD SHX Text
XX=SD, SMOKE DAMPER
AutoCAD SHX Text
XX=FSD, COMBINATION FIRE/SMOKE DAMPER
AutoCAD SHX Text
(ALL INSTALLED WITH ACCESS PANEL)
AutoCAD SHX Text
AP
AutoCAD SHX Text
AP
AutoCAD SHX Text
AP
AutoCAD SHX Text
ACCESS PANELS
AutoCAD SHX Text
SUPPLY GRILLE OR REGISTER
AutoCAD SHX Text
RETURN OR EXHAUST GRILLE OR REGISTER
AutoCAD SHX Text
SUPPLY DUCT TURNING UP
AutoCAD SHX Text
RETURN DUCT TURNING UP
AutoCAD SHX Text
EXHAUST DUCT TURNING UP
AutoCAD SHX Text
SUPPLY DUCT TURNING DOWN
AutoCAD SHX Text
RETURN DUCT TURNING DOWN
AutoCAD SHX Text
EXHAUST DUCT TURNING DOWN
AutoCAD SHX Text
DARK AREA(S) INDICATES AIRFLOW DIRECTION
AutoCAD SHX Text
LINEAR DIFFUSER
AutoCAD SHX Text
CONCENTRIC SIZE TRANSITION
AutoCAD SHX Text
ECCENTRIC SIZE TRANSITION
AutoCAD SHX Text
SQUARE-TO-ROUND TRANSITION
AutoCAD SHX Text
OFFSET PERPENDICULAR TO DRAWING PLANE
AutoCAD SHX Text
UP
AutoCAD SHX Text
DN
AutoCAD SHX Text
FLAG, IN INCHES WATER GAUGE. SPEC'D
AutoCAD SHX Text 6.0
AutoCAD SHX Text -2.0
AutoCAD SHX Text
DUCT PRESSURE CLASS, IN DIRECTION OF
AutoCAD SHX Text
DEFAULT IF NO CLASSIFICATION SHOWN.
AutoCAD SHX Text
ZONE REHEAT COIL
AutoCAD SHX Text
RHC
AutoCAD SHX Text
AutoCAD SHX Text
VAV
AutoCAD SHX Text
AutoCAD SHX Text
SINGLE DUCT VAV BOX W/ REHEAT COIL
AutoCAD SHX Text
VAV
AutoCAD SHX Text
AutoCAD SHX Text
VAV
AutoCAD SHX Text
AutoCAD SHX Text
SERIES FAN POWERED (CONSTANT SUPPLY
AutoCAD SHX Text
AIRFLOW) VAV BOX W/ REHEAT COIL
AutoCAD SHX Text
VAV
AutoCAD SHX Text
AutoCAD SHX Text
PARALLEL FAN POWERED (VARIABLE SUPPLY
AutoCAD SHX Text
AIRFLOW) VAV BOX W/ REHEAT COIL
AutoCAD SHX Text
ROUND DIFFUSER
AutoCAD SHX Text
FLOW SWITCH
AutoCAD SHX Text F
AutoCAD SHX Text
MECHANICAL DRAWING SHEET INDEX
AutoCAD SHX Text
AREA "A" BASEMENT MECHANICAL DEMOLITION PLAN
AutoCAD SHX Text
MD3.0
AutoCAD SHX Text
AREA "B" BASEMENT MECHANICAL DEMOLITION PLAN
AutoCAD SHX Text
MD3.1
AutoCAD SHX Text
AREA "A" FIRST FLOOR MECHANICAL DEMOLITION PLAN
AutoCAD SHX Text
MD3.2
AutoCAD SHX Text
MD3.3
AutoCAD SHX Text
MD3.5
AutoCAD SHX Text
MD3.6
AutoCAD SHX Text
MD3.7
AutoCAD SHX Text
MECHANICAL/ELECTRICAL SCHEDULES
AutoCAD SHX Text M5.0
AutoCAD SHX Text
WORK IN EXISTING BUILDINGS
AutoCAD SHX Text
1. EXISTING EQUIPMENT, DEVICES, PIPING, DUCTWORK, AND SIMILAR ITEMS TO BE REMOVED ARE REPRESENTED WITH EXISTING EQUIPMENT, DEVICES, PIPING, DUCTWORK, AND SIMILAR ITEMS TO BE REMOVED ARE REPRESENTED WITH HEAVY, DASHED LINETYPES. EXISTING EQUIPMENT, DEVICES, PIPING, DUCTWORK AND SIMILAR ITEMS TO REMAIN ARE REPRESENTED WITH SOLID, SCREENED (LIGHT TONE) LINES. 2. EXISTING CONDITIONS INDICATED ON DRAWINGS WERE TAKEN FROM DRAWINGS FOR PREVIOUS PROJECTS AND/OR EXISTING CONDITIONS INDICATED ON DRAWINGS WERE TAKEN FROM DRAWINGS FOR PREVIOUS PROJECTS AND/OR LIMITED SITE INVESTIGATION, AS SUCH, THEY MAY NOT REFLECT TRUE AS-BUILT CONDITIONS. FIELD VERIFY EXISTING CONDITIONS THAT IMPACT THE SCOPE AND NATURE OF THE WORK. FIELD VERIFY SIZES OF EXISTING PIPING AND DUCTWORK AS RELEVANT TO THE WORK. NOTIFY ENGINEER IMMEDIATELY IF FIELD CONDITIONS OR SIZES VARY SUBSTANTIALLY FROM EXISTING CONDITIONS SHOWN ON DRAWINGS. 3. WHERE EXISTING EQUIPMENT, DEVICES, PIPING, DUCTWORK AND SIMILAR ITEMS ARE SHOWN TO BE REMOVED, REMOVAL WHERE EXISTING EQUIPMENT, DEVICES, PIPING, DUCTWORK AND SIMILAR ITEMS ARE SHOWN TO BE REMOVED, REMOVAL ALL ACCESSORIES AND ATTACHMENTS DEDICATED TO THE REMOVED ITEM(S). THIS INCLUDES BUT IS NOT LIMITED TO HANGERS AND SUPPORTS, BRACING, BASES, HOUSEKEEPING PADS, POWER AND CONTROL WIRING, SIGNAGE AND LABELING, GUARDS, AND DEDICATED MEANS OF ACCESS (STEPS, PLATFORMS, HOISTS, ETC.) 4. REMOVE ALL ABANDONED PIPING, DUCTWORK, EQUIPMENT, AND SIMILAR ITEMS AS ENCOUNTERED. REMOVE ALL ABANDONED PIPING, DUCTWORK, EQUIPMENT, AND SIMILAR ITEMS AS ENCOUNTERED. 5. REMOVE PIPING AND DUCTWORK BACK TO LAST ACTIVE MAIN. CAP, PLUG, AND/OR VALVE OFF THE ACTIVE MAIN. REMOVE PIPING AND DUCTWORK BACK TO LAST ACTIVE MAIN. CAP, PLUG, AND/OR VALVE OFF THE ACTIVE MAIN. 6. COORDINATE SHUTDOWNS OF EXISTING SYSTEMS WITH OWNER. REFER TO GENERAL CONDITIONS AND OTHER GENERAL COORDINATE SHUTDOWNS OF EXISTING SYSTEMS WITH OWNER. REFER TO GENERAL CONDITIONS AND OTHER GENERAL CONTRACT REQUIREMENTS.
AutoCAD SHX Text
EQUIPMENT TO REMAIN
AutoCAD SHX Text
EQUIPMENT TO BE REMOVED
AutoCAD SHX Text
CONTROL DEVICE TO REMAIN
AutoCAD SHX Text
CONTROL DEVICE TO BE REMOVED
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
POINT OF CONNECTION, NEW TO EXISTING
AutoCAD SHX Text
POINT OF DISCONNECTION
AutoCAD SHX Text
PIPING TO REMAIN
AutoCAD SHX Text
PIPING TO BE REMOVED
AutoCAD SHX Text
PIPING TO BE REMOVED (HATCHED)
AutoCAD SHX Text
DUCTWORK TO REMAIN
AutoCAD SHX Text
DUCTWORK TO BE REMOVED
AutoCAD SHX Text
DUCTWORK TO BE REMOVED (HATCHED)
AutoCAD SHX Text M3.0
AutoCAD SHX Text M3.1
AutoCAD SHX Text M3.2
AutoCAD SHX Text M3.3
AutoCAD SHX Text M3.5
AutoCAD SHX Text M4.0
AutoCAD SHX Text
MD3.4
AutoCAD SHX Text M3.4
AutoCAD SHX Text M
AutoCAD SHX Text
AREA "B" FIRST FLOOR MECHANICAL DEMOLITION PLAN
AutoCAD SHX Text
AREA "A" SECOND FLOOR MECHANICAL DEMOLITION PLAN
AutoCAD SHX Text
AREA "B" SECOND FLOOR MECHANICAL DEMOLITION PLAN
AutoCAD SHX Text
AREA "A" BASEMENT MECHANICAL PLAN
AutoCAD SHX Text
AREA "B" BASEMENT MECHANICAL PLAN
AutoCAD SHX Text
AREA "A" FIRST FLOOR MECHANICAL PLAN
AutoCAD SHX Text
AREA "B" FIRST FLOOR MECHANICAL PLAN
AutoCAD SHX Text
AREA "A" SECOND FLOOR MECHANICAL PLAN
AutoCAD SHX Text
AREA "B" SECOND FLOOR MECHANICAL PLAN
AutoCAD SHX Text
AREA "A" ROOF MECHANICAL DEMOLITION PLAN
AutoCAD SHX Text
AREA "B" ROOF MECHANICAL DEMOLITION PLAN
AutoCAD SHX Text
MECHANICAL DETAILS
LA
C
E
LG
C O
O
LI
N G
S
YS
TE
M
-B
0- C
AM
P
R
AP
ID
SHEET TITLE
th
S tre et R ap id
C ity
, S D
Fa x:
.7
.3
Te l:
5.
7.
PROJECT NO.
REVISIONDATE
R
AP
ID
C
IT
Y, S O
U
TH
D
AK
O
TA
25004
08/27/2025DATE
DRAWN BY
CHECKED BY
SHEET NUMBER
C
FM
O
KEY PLAN
NTS
A
B
REG . NO .
HTUOS ATOKAD
GARY J. KUHL RE
EN
IG
NE
LANOISSEFORP
DERETSIGER
GSL
GJK
BASEMENT AREA "A"
MECHANICAL DEMOLITION
PLAN
MD3.0
BASEMENT AREA "A" MECHANICAL DEMOLITION PLAN
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 5.5
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 9.5
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text 7.5
AutoCAD SHX Text 3.5
AutoCAD SHX Text 6.5
AutoCAD SHX Text 8.5
AutoCAD SHX Text 11.5
AutoCAD SHX Text E
AutoCAD SHX Text 10.1
AutoCAD SHX Text 10.5
AutoCAD SHX Text 11.9
AutoCAD SHX Text 10.5
AutoCAD SHX Text 11.9
AutoCAD SHX Text
MATCH LINE
AutoCAD SHX Text
MATCH LINE
AutoCAD SHX Text
CRAC
AutoCAD SHX Text
AutoCAD SHX Text
CRAC
AutoCAD SHX Text
AutoCAD SHX Text 46/32
AutoCAD SHX Text B
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text B
AutoCAD SHX Text 46/32
AutoCAD SHX Text
UP THRU LOADING DOCK
AutoCAD SHX Text F
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text 8/4
AutoCAD SHX Text E-1
AutoCAD SHX Text
AutoCAD SHX Text 12/10
AutoCAD SHX Text 12/10
AutoCAD SHX Text E-2
AutoCAD SHX Text
AutoCAD SHX Text 10/8
AutoCAD SHX Text 16/10
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text 30/20
AutoCAD SHX Text 30/20
AutoCAD SHX Text 14"%%C
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text 16/16
AutoCAD SHX Text 14"%%C
AutoCAD SHX Text S-3
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text 10"%%C
AutoCAD SHX Text 24/16
AutoCAD SHX Text R-2
AutoCAD SHX Text
AutoCAD SHX Text 10/8
AutoCAD SHX Text R-3
AutoCAD SHX Text
AutoCAD SHX Text 10/6
AutoCAD SHX Text 36/16
AutoCAD SHX Text 26/16
AutoCAD SHX Text R-2
AutoCAD SHX Text
AutoCAD SHX Text 24/18
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text R-3
AutoCAD SHX Text
AutoCAD SHX Text 10/6
AutoCAD SHX Text 26/16
AutoCAD SHX Text 10/12
AutoCAD SHX Text R
AutoCAD SHX Text 24/16
AutoCAD SHX Text 20/14
AutoCAD SHX Text 20/14
AutoCAD SHX Text 14/12
AutoCAD SHX Text R-4
AutoCAD SHX Text
AutoCAD SHX Text 14"%%C
AutoCAD SHX Text 14/12
AutoCAD SHX Text 12/12
AutoCAD SHX Text 8/14
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text 14/12
AutoCAD SHX Text 10/6
AutoCAD SHX Text R-3
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text S-3
AutoCAD SHX Text
AutoCAD SHX Text 24/18
AutoCAD SHX Text 24/18
AutoCAD SHX Text S-2
AutoCAD SHX Text
AutoCAD SHX Text 24/16
AutoCAD SHX Text R-3
AutoCAD SHX Text
AutoCAD SHX Text R-2
AutoCAD SHX Text
AutoCAD SHX Text
VAV
AutoCAD SHX Text 4-008
AutoCAD SHX Text
VAV
AutoCAD SHX Text 4-004
AutoCAD SHX Text
VAV
AutoCAD SHX Text 4-003
AutoCAD SHX Text
VAV
AutoCAD SHX Text 4-006
AutoCAD SHX Text
VAV
AutoCAD SHX Text 4-009
AutoCAD SHX Text
VAV
AutoCAD SHX Text 4-002
AutoCAD SHX Text
VAV
AutoCAD SHX Text 4-001
AutoCAD SHX Text 24/16
AutoCAD SHX Text 20/14
AutoCAD SHX Text 14/14
AutoCAD SHX Text 14/14
AutoCAD SHX Text 8/8
AutoCAD SHX Text R-4
AutoCAD SHX Text
AutoCAD SHX Text 18/14
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 10/8
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 12/12
AutoCAD SHX Text 16/12
AutoCAD SHX Text 10/12
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 18/16
AutoCAD SHX Text 14/12
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 10"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 16/14
AutoCAD SHX Text R-4
AutoCAD SHX Text
AutoCAD SHX Text 14/12
AutoCAD SHX Text 8/10
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 14/12
AutoCAD SHX Text 14/8
AutoCAD SHX Text 14/8
AutoCAD SHX Text R-4
AutoCAD SHX Text
AutoCAD SHX Text 14/8
AutoCAD SHX Text S-1
AutoCAD SHX Text
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 14/12
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 10/10
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 10"%%C
AutoCAD SHX Text 16/10
AutoCAD SHX Text 20/12
AutoCAD SHX Text 8/8
AutoCAD SHX Text 18/14
AutoCAD SHX Text 10/12
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 10/10
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8/8
AutoCAD SHX Text 8/10
AutoCAD SHX Text 10/12
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 16/8
AutoCAD SHX Text 16/14
AutoCAD SHX Text R-4
AutoCAD SHX Text
AutoCAD SHX Text 16/14
AutoCAD SHX Text R-2
AutoCAD SHX Text
AutoCAD SHX Text 14"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 10"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 10"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 16/14
AutoCAD SHX Text 8/12
AutoCAD SHX Text 14/12
AutoCAD SHX Text 10/12
AutoCAD SHX Text 6/12
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 14/12
AutoCAD SHX Text 14/12
AutoCAD SHX Text 12/12
AutoCAD SHX Text 10/6
AutoCAD SHX Text R-3
AutoCAD SHX Text
AutoCAD SHX Text R-4
AutoCAD SHX Text
AutoCAD SHX Text 10/12
AutoCAD SHX Text 10/12
AutoCAD SHX Text B
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text
AutoCAD SHX Text 16/12
AutoCAD SHX Text 12/10
AutoCAD SHX Text 12/10
AutoCAD SHX Text 10/6
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 8"%%C
AutoCAD SHX Text 42/20
AutoCAD SHX Text 60/16
AutoCAD SHX Text 12/14
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text S-9
AutoCAD SHX Text
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text S-9
AutoCAD SHX Text
AutoCAD SHX Text S-9
AutoCAD SHX Text
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text S-9
AutoCAD SHX Text
AutoCAD SHX Text S-9
AutoCAD SHX Text
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text 12"%%C
AutoCAD SHX Text S-9
AutoCAD SHX Text
AutoCAD SHX Text S-9
AutoCAD SHX Text
AutoCAD SHX Text 16/16
AutoCAD SHX Text 30/16
AutoCAD SHX Text R-2
AutoCAD SHX Text
AutoCAD SHX Text R-2
AutoCAD SHX Text
AutoCAD SHX Text R-2
AutoCAD SHX Text
AutoCAD SHX Text 30/16
AutoCAD SHX Text 20/16
AutoCAD SHX Text M
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text 46/18
AutoCAD SHX Text R-2
AutoCAD SHX Text
AutoCAD SHX Text R-2
AutoCAD SHX Text
AutoCAD SHX Text R-2
AutoCAD SHX Text
AutoCAD SHX Text R-2
AutoCAD…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .