VCME_FireProtection_As-Builts.pdf

PDF 8 MB Posted Nov 6, 2025

Attached to: Volusia County Life Safety Systems Inspection, Testing and Repairs
Solicitation number: 26-B-18LL
Issued by: Volusia County, Florida

About this file

Written by GovTribe AI · Nov 18, 2025

This document comprises as-built fire protection plans and specifications for the Volusia County Office of the District Medical Examiner located at 3891 Tiger Bay Road, Daytona Beach, Florida 32124, prepared by Century Fire Protection, LLC under contract number PAX2214-48. The project encompasses the design and installation of a comprehensive wet automatic fire sprinkler system for a new single-story 19,892 square-foot medical examiner building, along with clean agent (NOVEC-1230) fire suppression systems for two specialized rooms. The fire protection design includes 203 total automatic sprinklers with a design discharge rate of 620.6 gallons per minute across five remote design areas, utilizing Class A light hazard and Class B ordinary hazard occupancy classifications with varying spray densities ranging from 0.10 to 0.15 gallons per square foot. The system incorporates a new 8-inch underground water main connection to the existing 6-inch water supply, with a hydrant flow test conducted on July 25, 2022, yielding 920 gallons per minute at a static pressure of 75 PSI and residual pressure of 45 PSI. Clean agent suppression systems were installed in Case Files Room 124 (133 square feet with 134 pounds of NOVEC-1230) and Property/Evidence Room 318 (239 square feet with 101 pounds of NOVEC-1230), both featuring independent control panels, smoke detection, discharge pressure switches, and manual release and abort stations. All systems comply with NFPA #13 (2016 Edition), NFPA #24 (2016 Edition), NFPA #25 (2017 Edition), Florida Building Code (7th Edition), and Florida Fire Prevention Code (7th Edition).

The as-built documents, dated September 26, 2023, include comprehensive utility plans, fire protection plans at 1/8-inch scale, hydraulic calculations, system riser details, equipment specifications, and installation details with supporting calculations and sequence of operations matrices. The general contractor for the project is Wharton-Smith, Inc., with the Authority Having Jurisdiction identified as Volusia County. System testing requirements mandate hydrostatic testing at 200 PSI for two hours or 50 PSI in excess of maximum system pressure, with all test certificates to be dated, signed, and witnessed by the AHJ. The owner is responsible for maintaining minimum temperature of 40 degrees Fahrenheit throughout the wet pipe system areas and for ongoing detection and prevention of microbial-induced corrosion. Fire extinguishers, painting of exposed pipe, wiring, alarms, bells, and monitoring systems are noted as either existing or by others, with the fire protection contractor responsible only for the installation of the fire suppression and clean agent systems as designed and specified in accordance with applicable codes and standards.

View the file

Other files

File	Type	Posted
Volusia_County_Life_Safety_Systems_Inspection,_Testing_and_Repairs_(Addendum_#3_Revision).pdf	PDF	Dec 29, 2025
2025-04-11_Volusia-County-EOC_FireScan.pdf	PDF	Dec 29, 2025
Volusia_County_Life_Safety_Systems_Inspection,_Testing_and_Repairs.pdf	PDF	Nov 18, 2025
Exhibit_A_-_Tour_Schedule_for_Mandatory_Pre-Solicitation_Meetings.pdf	PDF	Nov 18, 2025
Attachment_A_-_Price_Sheet.xlsx	XLSX spreadsheet	Nov 17, 2025
Insurance_Requirements_26-B-18LL.pdf	PDF	Nov 17, 2025
Elections_Plans.pdf	PDF	Nov 7, 2025
FIRE_ALARM_NOTIFIER_MANUAL.pdf	PDF	Nov 6, 2025
FIRE_ALARM_CONTROL_PANEL_MANUAL.pdf	PDF	Nov 6, 2025
Medical_Examiner_Plans.pdf	PDF	Nov 6, 2025
IT_Plans.pdf	PDF	Nov 6, 2025
EOC_Plans.pdf	PDF	Nov 6, 2025
VCME_NovecSupressionSystem_As-Builts.pdf	PDF	Nov 6, 2025
Fire_Alarm_-_DynaFire_As-Builts.pdf	PDF	Nov 6, 2025
F203.pdf	PDF	Nov 6, 2025
F101.pdf	PDF	Nov 6, 2025
F202.pdf	PDF	Nov 6, 2025
F201.pdf	PDF	Nov 6, 2025
F001.pdf	PDF	Nov 6, 2025
DEIT_E-6_Electrical_&_Fire_Alarm_Risers_.pdf	PDF	Nov 6, 2025
Price_Sheet_(4).xlsx	XLSX spreadsheet	Nov 6, 2025
SOW_(1).docx	DOCX document	Nov 6, 2025
PRIME-SUB_FORM_for_Contractors_rev._01.15.2025_(lock_before_publishing).xls	XLS spreadsheet	Nov 6, 2025

Show all 23

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

(E)

PROPOSED

MEDICAL EXAMINER

BUILDING

19,892 ft²

FFE = 41.0

DATE

LOCAT

SOURCE

NORTH

vicinity plan

NOT TO SCALE

7'-6" 0'-0"

15'-0" 30'-0"3'-9"

FIRE UTILITY PLAN

SCALE: 1"= 30'-0"

60'-0"

PROJECT:

DATE:

CONTRACT NO.

DRAWN BY:

SCALE:

AREA:

11/03/22

3891 Tiger Bay Road

Daytona Beach, FL 32124

PAX2214-48

TN / DL

UTILITY PLAN AND DETAILS

ORLANDO OFFICE

201 TECH DRIVE

SANFORD, FL 32771

PHONE: (321) 319-8850

FAX: (407) 549-2515

FP 1.0

AS NOTED

AHJ: BLDG PERMIT:VOLUSIA COUNTY

Volusia County

Office of the District Medical Examiner

FIRE PROTECTION

DeLand, FL 32720

123 West Indiana Ave

REVISIONS

OWNER:

BYDATE

Volusia County Florida

NO ALTERATIONS, REPRODUCTIONS OR USE OF THE CONTENTS

IN PART OR IN FULL MAY BE MADE WITHOUT THE PERMISSION

OF CENTURY FIRE PROTECTION, LLC.

GENERAL NOTES

Sanford, FL 32771

750 Monroe Road

GENERAL CONTRACTOR:

Wharton-Smith, Inc.

0'-6" 0'-0"

1'-0" 2'-0"0'-3"

FIRE RISER DETAIL

SCALE: 1

2"= 1'-0"

4'-0"

NOTE: UTILITY PLAN SHOWN FOR HYDRAULIC REFERENCE ONLY - SEE CONTRACT CIVIL DRAWINGS (ALL SITE WORK BY OTHERS)

11/28/22 1 REVISED PER A/E REVIEW COMMENTS DL

C F P

A S

-B U

9/26/23 2 AS-BUILTS DL

AutoCAD SHX Text

STEEL FRAMING HANGER DETAIL

AutoCAD SHX Text

ALL THREAD ROD

AutoCAD SHX Text

BEAM CLAMP

AutoCAD SHX Text

BAND HANGER

AutoCAD SHX Text

SPRINKLER PIPE

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text NOTE: ALL PIPE TO HANG FROM TOP CHORD OF BAR JOIST. HANGER LOCATIONS, SPACING, AND COMPONENT SIZING TO COMPLY WITH NFPA #13.

AutoCAD SHX Text

STRUCTURAL STEEL MEMBER

AutoCAD SHX Text *0"

AutoCAD SHX Text ±0'-0"

AutoCAD SHX Text

STANDARD FIRE PROTECTION SYMBOLS

AutoCAD SHX Text

HYDRAULIC CALCULATION REFERENCE NODE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

DISTANCE FROM CENTER OF PIPE TO UNDERSIDE OF DECK

AutoCAD SHX Text

DISTANCE FROM CENTER OF PIPE TO FINISHED FLOOR

AutoCAD SHX Text

HANGER

AutoCAD SHX Text

GROOVED COUPLING

AutoCAD SHX Text

HANGER LOCATION CHART

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text

4'-0" MAX.

AutoCAD SHX Text

3" MIN.

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text

3" MIN.

AutoCAD SHX Text

12'-0" MAX.

AutoCAD SHX Text C

AutoCAD SHX Text

PIPE SIZE

AutoCAD SHX Text C

AutoCAD SHX Text

5'-0" MAX.

AutoCAD SHX Text A

AutoCAD SHX Text

HANGER RING

AutoCAD SHX Text

3" MIN.

AutoCAD SHX Text

15'-0" MAX.

AutoCAD SHX Text 1 1/2"-8"

AutoCAD SHX Text B*

AutoCAD SHX Text

STEEL PIPE

AutoCAD SHX Text 1"

AutoCAD SHX Text

3'-0" MAX.

AutoCAD SHX Text

UPRIGHT SPRINKLER HEAD

AutoCAD SHX Text

12'-0" MAX.

AutoCAD SHX Text A

AutoCAD SHX Text B*

AutoCAD SHX Text *MAXIMUM HANGER SPACING FOR THEADED LIGHTWALL STEEL PIPE IS 12'-0" FOR ALL PIPE SIZES

AutoCAD SHX Text

DENOTES EXISTING PIPE

AutoCAD SHX Text

EXISTING SPRINKLER TO REMAIN

AutoCAD SHX Text

DENOTES NEW 1" SCH 40 BLACK PIPE

AutoCAD SHX Text

STEEL FRAMING TRAPEZE HANGER DETAIL

AutoCAD SHX Text

ALL THREAD ROD

AutoCAD SHX Text

BEAM CLAMP

AutoCAD SHX Text

BAND HANGER

AutoCAD SHX Text

SPRINKLER PIPE

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text NOTE: ALL PIPE TO HANG FROM TOP CHORD. HANGER LOCATIONS, SPACING, AND COMPONENT SIZING TO COMPLY WITH NFPA #13.

AutoCAD SHX Text

STRUCTURAL STEEL MEMBER

AutoCAD SHX Text

ALL THREAD ROD

AutoCAD SHX Text

STRUT CHANNEL (SLOTTED)

AutoCAD SHX Text

NUT & WASHER (TYP)

AutoCAD SHX Text

CENTER OF TILE DETAIL

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text NOTE: CEILING TILES SHOWN IN PLAN VIEW, SPRINKLER SYMBOL MAY VARY SEE LEGEND FOR SPECIFIC SPRINKLER TYPE. CEILING TILES SHOWN ARE STANDARD w/o ADDITIONAL DECORATIVE SCORE LINES.

AutoCAD SHX Text 2' x 4' ACT

AutoCAD SHX Text 2' x 2' ACT

AutoCAD SHX Text

‚ = CENTERLINE OF TILE= CENTERLINE OF TILE

AutoCAD SHX Text

14 TILE LENGTH

AutoCAD SHX Text

14 TILE LENGTH

AutoCAD SHX Text

ACCEPTABLE ALTERNATE LOCATIONS

AutoCAD SHX Text

AUTOMATIC SPRINKLER (TYP)

AutoCAD SHX Text

CONCRETE SLAB

AutoCAD SHX Text

CONCRETE HANGER DETAIL

AutoCAD SHX Text

ALL THREAD ROD

AutoCAD SHX Text

CONCRETE INSERT

AutoCAD SHX Text

BAND HANGER

AutoCAD SHX Text

SPRINKLER PIPE

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text NOTE: ALL PIPE TO HANG FROM TOP CHORD. HANGER LOCATIONS, SPACING, AND COMPONENT SIZING TO COMPLY WITH NFPA #13.

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text

PENDENT SPRINKLER

AutoCAD SHX Text

1" NIPPLE

AutoCAD SHX Text

1" 90 ELL

AutoCAD SHX Text

1" 90 ELL

AutoCAD SHX Text

1" NIPPLE

AutoCAD SHX Text

REDUCING CPLG

AutoCAD SHX Text

ESCUTCHEON

AutoCAD SHX Text

1" DEFLECTOR

AutoCAD SHX Text

FINISH CLG

AutoCAD SHX Text

MAX. UNSUPPORTED LENGTH

AutoCAD SHX Text

PER NFPA#13 9.2.3.5

AutoCAD SHX Text

RETURN BEND DETAIL

AutoCAD SHX Text

SEMI-RECESSED PENDENT

AutoCAD SHX Text

SPRINKLER PIPE

AutoCAD SHX Text 1" GLOBE VALVE w/ 1" PLUG

AutoCAD SHX Text

AUXILIARY DRAIN DETAIL

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text

HANGER TO STRUCTURE

AutoCAD SHX Text

LOW MAIN / BRANCH LINE PIPE

AutoCAD SHX Text

CONCRETE DECK

AutoCAD SHX Text

SAMMY FOR CONCRETE DETAIL

AutoCAD SHX Text

ALL THREAD ROD

AutoCAD SHX Text

BAND HANGER

AutoCAD SHX Text

SPRINKLER PIPE

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text

SAMMY FOR CONCRETE

AutoCAD SHX Text NOTE: ALL PIPE TO HANG FROM TOP CHORD. HANGER LOCATIONS, SPACING, AND COMPONENT SIZING TO COMPLY WITH NFPA #13.

AutoCAD SHX Text

RETURN BEND DETAIL

AutoCAD SHX Text

CONCEALED PENDENT SPRINKLER

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text

1" NIPPLE

AutoCAD SHX Text

1" 90 ELL

AutoCAD SHX Text

1" 90 ELL

AutoCAD SHX Text

1" NIPPLE

AutoCAD SHX Text

REDUCING CPLG

AutoCAD SHX Text

COVERPLATE

AutoCAD SHX Text

MAX. UNSUPPORTED LENGTH

AutoCAD SHX Text

PER NFPA#13 9.2.3.5

AutoCAD SHX Text

CONCEALED PENDENT

AutoCAD SHX Text

SPRINKLER PIPE

AutoCAD SHX Text

1" NIPPLE

AutoCAD SHX Text 18"

AutoCAD SHX Text

INSULATED FREEZER CEILING STRUCTURE

AutoCAD SHX Text

1-3/4" DIA. SPRINKLER BARREL CLEARANCE HOLE

AutoCAD SHX Text

SPRINKLER BARREL

AutoCAD SHX Text

WET SYSTEM PIPE

AutoCAD SHX Text

DRY TYPE PENDENT SPRINKLER

AutoCAD SHX Text

SEALANT

AutoCAD SHX Text

PLUG

AutoCAD SHX Text

TEE

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text

PENDENT SPRINKLER DETAIL

AutoCAD SHX Text

COOLER / FREEZER DRY

AutoCAD SHX Text

SCREWED PLUG

AutoCAD SHX Text

SPRINKLER SYSTEM

AutoCAD SHX Text

MANUAL AIR RELEASE

AutoCAD SHX Text

RISER WITHOUT TRAP

AutoCAD SHX Text

ISOLATION BALL VALVE FOR

AutoCAD SHX Text

HIGHEST PIPE REMOTE FROM

AutoCAD SHX Text

CONNECTION TO WET

AutoCAD SHX Text

MANUAL AIR VENT DETAIL

AutoCAD SHX Text

SCALE: NOT TO SCALE

AutoCAD SHX Text NOTES: MANUAL AIR VENT ON EACH WET PIPE SYSTEM PROVIDED PER NFPA #13 SECTIONS 7.1.5 AND 8.16.6 (2) (REFERENCE 2016 EDITION FUTURE REQUIREMENT) ARRANGEMENT PROVIDED IS SCHEMATIC, MODIFY TO SUIT CONDITIONS

AutoCAD SHX Text

FIRE SPRINKLER

AutoCAD SHX Text

RISER ASSEMBLY- SEE DETAIL

AutoCAD SHX Text

NEW FIRE

AutoCAD SHX Text

HYDRANT

AutoCAD SHX Text

FIRE SPRINKLER

AutoCAD SHX Text

RISER ASSEMBLY- SEE DETAIL

AutoCAD SHX Text

NEW 8" DCDA AMES

AutoCAD SHX Text

MODEL 3000SS

AutoCAD SHX Text

POINT OF SERVICE

AutoCAD SHX Text

LOCATION

AutoCAD SHX Text

EX 6" WATER MAIN

AutoCAD SHX Text

NEW 8" TAP & GATE

AutoCAD SHX Text

VALVE (PROVIDED BY DAYTONA UTILITIES)

AutoCAD SHX Text

EX FIRE HYDRANT.

AutoCAD SHX Text

POINT OF SUPPLY

AutoCAD SHX Text

FOR HYDRAULIC

AutoCAD SHX Text

CALCULATIONS.

AutoCAD SHX Text

NEW FIRE

AutoCAD SHX Text

HYDRANT

AutoCAD SHX Text

NEW FDC

AutoCAD SHX Text

NEW 6" CHECK

AutoCAD SHX Text

VALVE IN UG

AutoCAD SHX Text

VALVE BOX

AutoCAD SHX Text FIRE HYDRANT FLOW TEST LOCATION: ON SITE DATE: 07/25/22 PERFORMED BY: CENTURY FIRE PROTECTION WITNESSED BY: DAYTONA UTILITIES REP STATIC PRESSURE: 75 PSI RESIDUAL PRESSURE: 45 PSI FLOW: 920 GPM

AutoCAD SHX Text

NEW 8" DI PIPE

AutoCAD SHX Text

FIRE LINE

AutoCAD SHX Text

NEW 6" PVC PIPE

AutoCAD SHX Text

FIRE LINE

AutoCAD SHX Text

NEW 6" PVC PIPE

AutoCAD SHX Text

FIRE LINE TO FDC

AutoCAD SHX Text

NEW 6" PVC PIPE

AutoCAD SHX Text

WATER SERVICE TO

AutoCAD SHX Text

BUILDING

AutoCAD SHX Text FIRE PROTECTION DESIGN CRITERIA 61G15-32.003 (1) (2) (5) 1.) SCOPE OF WORK: FIRE PROTECTION SYSTEM FOR NEW CONSTRUCTION 1 STORY MEDICAL FIRE PROTECTION SYSTEM FOR NEW CONSTRUCTION 1 STORY MEDICAL EXAMINER'S BUILDIONG. BUILDING SHALL BE PROTECTED WITH A WET AUTOMATIC FIRE SPRINKLER SYSTEM IN ACCORDANCE WITH NFPA #13, 2016 EDITION 2.)ACCEPTABLE TEST CRITERIA: TESTING OF FIRE PROTECTION SYSTEM AND ITS TESTING OF FIRE PROTECTION SYSTEM AND ITS COMPONENTS SHALL COMPLY WITH ALL APPLICABLE ITEMS PER NFPA #13, 2016 EDITION, FIGURES 10.10.1 AND 25.1, CONTRACTOR'S MATE4RIAL AND TEST CERTIFICATE FOR ABOVE AND UNDERGROUND PIPING. SYSTEMS SHALL BE HYDROSTATICALLY TESTED AT NOT LESS THAN 200 PSI PRESSURE FOR 2 HOURS, OR AT 50 PSI IN EXCESS OF THE MAXIMUM PRESSURE, WHEN THE MAXIMUM PRESSURE TO BE MAINTAINED IN THE SYSTEMS IS IN EXCESS OF 150 PSI. THE TESTING PRESSURE SHALL BE READ FROM A GAUGE LOCATED AT THE LOW ELEVATION POINT OF THE INDIVIDUAL SYSTEMS OR PORTION OF THE SYSTEM BEING TESTED. THE CONTRACTOR SHALL PERFORM ALL REQUIRED ACCEPTANCE TESTS IN ACCORDANCE WITH NFPA #13. COMPLETE THE CONTRACTOR'S MATERIAL AND TEST CERTIFICATE(S), AND FORWARD THE APPROVED CERTIFICATE(S) TO THE ARCHITECT / ENGINEER FOR APPROVAL OF THE INSTALLATION. ALL TEST CERTIFICATE(S) SHALL BE DATED, SIGNED AND WITNESSED BY AHJ, SUBMIT ONE COPY OF EACH TEST CERTIFICATE TO ARCHITECT / ENGINEER. 5.)STRUCTURAL SUPPORT AND STRUCTURAL OPENINGS: THE SUPPORT SYSTEMS FOR THIS THE SUPPORT SYSTEMS FOR THIS BUILDING SHALL BE DESIGNED BY A STATE LICENSED STRUCTURAL ENGINEER IN ACCORDANCE WITH F.A.C., PLEASE REFER TO STRUCTURAL DRAWINGS FOR LIVE AND DEAD LOADING INFORMATION. THERE ARE NO SIGNIFICANT STRUCTURAL OPENINGS THAT WILL BE REQUIRED FOR THIS FIRE SPRINKLER SYSTEM. 61G15-32.004 (2) A-L A.)POINT OF SERVICE: POINT OF CONNECTION SHALL BE TO AN EXISTING WATER SUPPLY POINT OF CONNECTION SHALL BE TO AN EXISTING WATER SUPPLY MAIN ON SITE. POINT OF SERVICE OCCURS WHEN THE UNDERGROUND PIPING FOR THE FIRE SPRINKLER SYSTEM BECOMES EXCLUSIVELY FOR THE FIRE PROTECTION SYSTEM. ONE FIRE DEPARTMENT CONNECTION SHALL BE LOCATED ON SITE. REFER TO UTILITY DRAWING FOR LOCATION OF POS AND FDC. B.)APPLICABLE STANDARDS TO BE APPLIED: FLORIDA BUILDING CODE, 7 EDITION TH EDITION FLORIDA FIRE PREVENTION CODE, 7 EDITION TH EDITION NFPA #13, 2016 EDITION, AUTOMATIC SPRINKLER SYSTEMS NFPA #24, 2016 EDITION, PRIVATE FIRE SERVICES MAINS AND THEIR APPURTENANCES NFPA #25, 2017 EDITION, INSPECTION, TESTING & MAINTENANCE OF WATER BASED FIRE PROTECTION SYSTEMS C.)CLASSIFICATIONS OF HAZARD OCCUPANCY PER NFPA #13: LIGHT HAZARD OCCUPANCIES INCLUDE OCCUPANCIES HAVING USES AND CONDITIONS SIMILAR TO THE FOLLOWING: OFFICE SPACES, BREAK ROOMS, CONFERENCE ROOMS, BATHROOMS, AND CORRIDORS ORDINARY HAZARD GROUP I OCCUPANCIES INCLUDE OCCUPANCIES HAVING USES AND CONDITIONS SIMILAR TO THE FOLLOWING: STORAGE ROOMS, ELECTRICAL ROOMS, MECHANICAL ROOMS, AND IT ROOMS EXTRA HAZARD GROUP I OCCUPANCIES INCLUDE OCCUPANCIES HAVING USES AND CONDITIONS SIMILAR TO THE FOLLOWING: BIO WASTE STORAGE ROOMS DENSITY / AREA: LIGHT HAZARD: 0.10 GPM/SQ. FT. OVER THE MOST DEMANDING 1500 SQ.FT. AREA OF SPRINKLER OPERATION. AN ADDITIONAL 100 GPM SHALL BE ADDED FOR A TOTAL COMBINED INSIDE AND OUTSIDE HOSE STREAM DEMAND ORDINARY HAZARD: 0.15 GPM/SQ. FT. OVER THE MOST DEMANDING 1500 SQ.FT. AREA OF SPRINKLER OPERATION. AN ADDITIONAL 250 GPM SHALL BE ADDED FOR A TOTAL COMBINED INSIDE AND OUTSIDE HOSE STREAM DEMAND AREA REDUCTION BASED ON NFPA #13, 2016 EDITION, SECTION 11.2.3.2.3.1 SHALL BE ALLOWED AUTOMATIC SPRINKLER COVERAGE: LIGHT HAZARD SHALL BE MAXIMUM OF 225 SQ.FT. PER STANDARD COVERAGE A/S ORDINARY HAZARD SHALL BE A MAXIMUM OF 130 SQ.FT. PER STANDARD COVERAGE A/S EXTRA HAZARD SHALL BE A MAXIMUM OF 100 SQ.FT. PER STANDARD COVERAGE A/S EXTENDED COVERAGE A/S USED UNDER MANUFACTURER'S LISTED REQUIREMENTS D.)CHARACTERISTICS OF THE WATER SUPPLY TO BE USED: THE EXISTING WATER MAIN IS AN THE EXISTING WATER MAIN IS AN 6" CIRCULATING MAIN LOCATED ON SITE ADJACENT TO THE EXISTING BUILDING. BASED ON THE FLOW TEST DATA RECEIVED, THE DURATION WILL SUPPORT THE DESIGN CRITERIA. A NEW 8" UNDERGROUND WATER MAIN CONNECTS TO EXISTING 6" UNDERGROUND WATER SUPPLY. THE NEW 8" UNDERGROUND MAIN EXTENDS TO THE NEW BUILDING WITH A DOUBLE CHECK DETECTOR ASSEMBLY AND REDUCES TO A 6" SUPPLY AT THE TEE INTERSECTION BRANCH TO THE BUILDING. THE NEW 6" UNDERGROUND SUPPLY MAIN THEN EXTENDS TO THE BUILDINGS FIRE SPRINKLER RISER. E.)FLOW TEST DATA: HYDRANT FLOW TEST WILL BE PERFORMED PRIOR TO THE DESIGN OF HYDRANT FLOW TEST WILL BE PERFORMED PRIOR TO THE DESIGN OF THE FIRE SPRINKLER SYSTEM FOR PERMIT, SEE UTILITY PLAN FOR CURRENT FLOW TEST DATA. F.)VALVE & ALARM REQUIREMENTS: ALL PADDLE TYPE WATER FLOW INDICATORS SHALL ALL PADDLE TYPE WATER FLOW INDICATORS SHALL HAVE A FLOW SWITCH. ALL VALVES CONTROLLING THE FIRE SPRINKLER SYSTEMS, INCLUDING BACKFLOW DEVICES, SHALL HAVE TAMPER SWITCHES. ALL ELECTRICAL DEVICES SHALL BE MONITORED BY CENTRAL STATION OR SIMILAR AS REQUIRED BY LOCAL AUTHORITY HAVING JURISDICTION AND SHALL BE IN COMPLIANCE WITH NFPA #72. G.)MICROBIAL INDUCED CORROSION (MIC): INSUFFICIENT DATE HAD BEEN FOUND RELATED INSUFFICIENT DATE HAD BEEN FOUND RELATED TO THE EXISTENCE OF EVIDENCE OF MIC BEING PRESENT IN THE PROVIDED WATER SUPPLY H.)BACKFLOW PREVENTION AND METERING SPECIFICATIONS: SHALL MEET OR EXCEED THE REQUIREMENTS OF THE LOCAL WATER PURVEYOR I.)QUALITY AND PERFORMANCE SPECIFICATIONS OF ALL YARD AND INTERIOR FIRE PROTECTION COMPONENTS: PRODUCT DATA SHEETS SHALL BE PROVIDED AT TIME OF FIRE : PRODUCT DATA SHEETS SHALL BE PROVIDED AT TIME OF FIRE SPRINKLER PERMIT SUBMITTAL BY FIRE PROTECTION CONTRACTOR. INTERIOR FIRE PROTECTION EQUIPMENT SHALL BE LISTED. J.)FIRE PUMP REQUIREMENTS; WATER SUPPLY IS ADEQUATE, THEREFORE NO FIRE PUMP IS ; WATER SUPPLY IS ADEQUATE, THEREFORE NO FIRE PUMP IS NEEDED K.)FIRE STORAGE TANK: WATER SUPPLY IS ADEQUATE, THEREFORE NO FIRE WATER WATER SUPPLY IS ADEQUATE, THEREFORE NO FIRE WATER STORAGE TANK IS NEEDED L.)STORAGE OCCUPANCY REQUIREMENTS: MISCELLANEOUS STORAGE OCCUPANCY IN : MISCELLANEOUS STORAGE OCCUPANCY IN ACCORDANCE WITH NFPA #13, 2016 EDITION, CHAPTER 13 WITH STORAGE BELOW 8'-6" OWNER'S INFORMATION CERTIFICATE AS DEPICTED IN NFPA #13 FIGURE A.23.1 SHALL BE PROVIDED BY OWNER FOR AHJ REVIEW AND VERIFICATION OF ANY POSSIBLE STORAGE

AutoCAD SHX Text SCOPE OF WORK: CENTURY FIRE PROTECTION TO START AT 1'-0" AFF (POINT OF CONNECTION), INSTALL NEW WET PIPE TYPE FIRE PROTECTION SYSTEM INSTALLED PER LOCAL AUTHORITY HAVING JURISDICTION, APPLICABLE BUILDING CODES, AND PER NFPA #13, 2016 EDITION

AutoCAD SHX Text

HYDRAULIC

AutoCAD SHX Text

PLACARD

AutoCAD SHX Text

HYDRAULIC

AutoCAD SHX Text

PLACARD

AutoCAD SHX Text

HYDRAULIC

AutoCAD SHX Text

PLACARD

AutoCAD SHX Text

HYDRAULIC

AutoCAD SHX Text

PLACARD

AutoCAD SHX Text

HYDRAULIC

AutoCAD SHX Text

PLACARD

AutoCAD SHX Text

HYDRAULIC

AutoCAD SHX Text

PLACARD

AutoCAD SHX Text

HYDRAULIC

AutoCAD SHX Text

PLACARD

AutoCAD SHX Text

HYDRAULIC

AutoCAD SHX Text

PLACARD

AutoCAD SHX Text

HYDRAULIC

AutoCAD SHX Text

PLACARD

AutoCAD SHX Text

HYDRAULIC

AutoCAD SHX Text

PLACARD

AutoCAD SHX Text

3" TO SYSTEM SEE PLAN FOR CONTINUATION

AutoCAD SHX Text

1 " GLV SCH. 40 14" GLV SCH. 40

AutoCAD SHX Text

6" DI FIRE SERVICE

AutoCAD SHX Text

3" BLK SCH. 10

AutoCAD SHX Text

3" BLK SCH. 10

AutoCAD SHX Text

PIPE DRAIN TO EXTERIOR

AutoCAD SHX Text

6" DI FIRE SERVICE (BY OTHERS)

AutoCAD SHX Text

FIRE PROTECTION DETAIL KEY

AutoCAD SHX Text

6" UNI-FLANGE

AutoCAD SHX Text

6" GROOVED FLANGE ADAPTER

AutoCAD SHX Text 6" x 3" GROOVED CONCENTRIC REDUCER

AutoCAD SHX Text 3" GROOVED BUTTERFLY VALVE w/ TAMPER SWITCH (WIRED BY OTHERS)

AutoCAD SHX Text

3" GROOVED CHECK VALVE

AutoCAD SHX Text 3" COMMERCIAL GROOVED RISER MANIFOLD w/ " ORIFICE 12" ORIFICE TEST & DRAIN & FLOW SWITCH (WIRED BY OTHERS)

AutoCAD SHX Text

WALL MOUNTED SPARE A/S CABINET

AutoCAD SHX Text

SYSTEM HYDRAULIC PLACARDS

AutoCAD SHX Text 6" 120V ALARM BELL w/ ALL WEATHER BOX MOUNTED ON BUILDING EXTERIOR (WIRED BY OTHERS)

AutoCAD SHX Text

1. NFPA 25, 2017 EDITION, SECTION 4.1.2 - THE RESPONSIBILITY FOR PROPERLY

AutoCAD SHX Text

MAINTAINING A WATER BASED FIRE PROTECTION SYSTEM SHALL BE THAT OF THE

AutoCAD SHX Text

OWNER OF THE PROPERTY.

AutoCAD SHX Text

2. IT IS THE RESPONSIBILITY OF THE OWNER OF THE PROPERTY TO PROVIDE HEAT

AutoCAD SHX Text

THROUGHOUT WET PIPE SPRINKLER SYSTEM AREA AND ENCLOSURES FOR DRY PIPE,

AutoCAD SHX Text

DELUGE AND OTHER TYPES OF VALVES CONTROLLING WATER SUPPLIES TO

AutoCAD SHX Text

SPRINKLERS. A MINIMUM OF 40°F SHALL BE MAINTAINED.

AutoCAD SHX Text

3. EXPERIENCE INDICATES THAT EXCESSIVE M.I.C. HAS NOT BEEN A PROBLEM IN THE

AutoCAD SHX Text

PROJECT AREA. OWNER IS RESPONSIBLE FOR DETECTION, TESTING, AND PREVENTION

AutoCAD SHX Text

OF M.I.C.

AutoCAD SHX Text

4. ALL WIRING, ALARMS, BELLS, AND MONITORING ARE EXISTING OR BY OTHERS.

AutoCAD SHX Text

5. FIRE EXTINGUISHERS AND PAINTING OF PIPE IS BY OTHERS. SPRINKLERS AND

AutoCAD SHX Text

VALVES SHALL NOT BE PAINTED OR COATED IN ANY MANNER EXCEPT BY

AutoCAD SHX Text

MANUFACTURER.

AutoCAD SHX Text

PROJECT LOCATION

This system as shown on company print no dated for at contract no is designed to discharge at a rate of a maximum area of when supplied with water at a rate of

Occupancy classification:

Commodity classification:

Maximum storage height:

Storage arrangement:

Number of heads flowing:

System Type:

Maximum velocity:

Flow from In-Rack sprinklers:

Flow from Overhead sprinklers:

Flow from Inside Hoses:

Flow from Outside Hoses:

Other fixed flows:

Total flow in system piping:

Additional flow at/beyond source:

Total of all flows:

Calculation results for Design Area gpm/ft² (L/min/m²) of floor area over

Surplus Pressure at Source:

Pressure Required at Source:

Pressure Available at Source:

at at the base of the riser.

Hose stream allowance of is included in the above.

1 Mech RM & Sally Port

Century Fire Protection FP 2.0 10/2022

Volusia Medical Examiners 3891 Tiger Bay Rd

PAX2214-48 0.15

1500 ft² 370.6 gpm 29.2 psi

Ordinary Group 1

N / A

Wet

14.25 ft/s

0 gpm

370.6 gpm

0 gpm

370.6 gpm

250 gpm

620.6 gpm

35.2 psi

60.5 psi

25.3 psi

This system as shown on company print no dated for at contract no is designed to discharge at a rate of a maximum area of when supplied with water at a rate of

Occupancy classification:

Commodity classification:

Maximum storage height:

Storage arrangement:

Number of heads flowing:

System Type:

Maximum velocity:

Flow from In-Rack sprinklers:

Flow from Overhead sprinklers:

Flow from Inside Hoses:

Flow from Outside Hoses:

Other fixed flows:

Total flow in system piping:

Additional flow at/beyond source:

Total of all flows:

Calculation results for Design Area gpm/ft² (L/min/m²) of floor area over

Surplus Pressure at Source:

Pressure Required at Source:

Pressure Available at Source:

at at the base of the riser.

Hose stream allowance of is included in the above.

2 Autopsy Transition

Century Fire Protection FP 2.0 10/2022

Volusia Medical Examiners 3891 Tiger Bay Rd

PAX2214-48 0.15

1500 ft² 209.4 gpm 40 psi

Ordinary Group 1

N / A

Wet

17.97 ft/s

0 gpm

209.4 gpm

0 gpm

209.4 gpm

250 gpm

459.4 gpm

45.6 psi

66.7 psi

21.1 psi

This system as shown on company print no dated for at contract no is designed to discharge at a rate of a maximum area of when supplied with water at a rate of

Occupancy classification:

Commodity classification:

Maximum storage height:

Storage arrangement:

Number of heads flowing:

System Type:

Maximum velocity:

Flow from In-Rack sprinklers:

Flow from Overhead sprinklers:

Flow from Inside Hoses:

Flow from Outside Hoses:

Other fixed flows:

Total flow in system piping:

Additional flow at/beyond source:

Total of all flows:

Calculation results for Design Area gpm/ft² (L/min/m²) of floor area over

Surplus Pressure at Source:

Pressure Required at Source:

Pressure Available at Source:

at at the base of the riser.

Hose stream allowance of is included in the above.

3 Autopsy Supply

Century Fire Protection FP 2.0 10/2022

Volusia Medical Examiners 3891 Tiger Bay Rd

PAX2214-48 0.15

1500 ft² 167.2 gpm 23.1 psi

Ordinary Group 1

N / A

Wet

7.54 ft/s

0 gpm

167.2 gpm

0 gpm

167.2 gpm

250 gpm

417.2 gpm

29.2 psi

68.1 psi

38.9 psi

This system as shown on company print no dated for at contract no is designed to discharge at a rate of a maximum area of when supplied with water at a rate of

Occupancy classification:

Commodity classification:

Maximum storage height:

Storage arrangement:

Number of heads flowing:

System Type:

Maximum velocity:

Flow from In-Rack sprinklers:

Flow from Overhead sprinklers:

Flow from Inside Hoses:

Flow from Outside Hoses:

Other fixed flows:

Total flow in system piping:

Additional flow at/beyond source:

Total of all flows:

Calculation results for Design Area gpm/ft² (L/min/m²) of floor area over

Surplus Pressure at Source:

Pressure Required at Source:

Pressure Available at Source:

at at the base of the riser.

Hose stream allowance of is included in the above.

4 Autopsy Room

Century Fire Protection FP 2.0 10/2022

Volusia Medical Examiners 3891 Tiger Bay Rd

PAX2214-48 0.1

1500 ft² 348.9 gpm 50.7 psi

Light Hazard

N / A

Wet

13.41 ft/s

0 gpm

348.9 gpm

0 gpm

348.9 gpm

100 gpm

448.9 gpm

56.7 psi

67 psi

10.4 psi

This system as shown on company print no dated for at contract no is designed to discharge at a rate of a maximum area of when supplied with water at a rate of

Occupancy classification:

Commodity classification:

Maximum storage height:

Storage arrangement:

Number of heads flowing:

System Type:

Maximum velocity:

Flow from In-Rack sprinklers:

Flow from Overhead sprinklers:

Flow from Inside Hoses:

Flow from Outside Hoses:

Other fixed flows:

Total flow in system piping:

Additional flow at/beyond source:

Total of all flows:

Calculation results for Design Area gpm/ft² (L/min/m²) of floor area over

Surplus Pressure at Source:

Pressure Required at Source:

Pressure Available at Source:

at at the base of the riser.

Hose stream allowance of is included in the above.

5 Open Office

Century Fire Protection FP 2.0 10/2022

Volusia Medical Examiners 3891 Tiger Bay Rd

PAX2214-48 0.1

1500 ft² 196.5 gpm 26.9 psi

Light Hazard

N / A

Wet

8.4 ft/s

0 gpm

196.5 gpm

0 gpm

196.5 gpm

100 gpm

296.5 gpm

32.7 psi

71.3 psi

38.6 psi

FIRST FLOOR

0' - 0"

5 6 84

ELECTRICAL

SALLY PORT

206FORENSIC

TECH OFFICE

309DECOMP

COOLER

DECOMP

AUTOPSY

LOCKER

ROOM

LAUNDRY

CORRIDOR

LOCKER

ROOM

PROPERTY /

EVIDENCE

SPECIMEN

STORAGE

PATIO

96.2

" / 1

1 2 3 7

14' - 6"

19' - 10"

BRG. POINT

FAMILY

MEETING

LARGE

CONFERENCE

BREAK

ROOM

OPERATIONS

MANAGER

ASSOCIATE.

ASSOCIATE

CHIEF ME

OFFICE

BUSINESS

OPS

FORENSIC

INVEST.

CONFERENCE

ROOM

TOILET

HSKP

DATA

OPEN

OFFICE

LOBBY

PUBLIC

TOILET

PUBLIC

TOILET

WELLNESS

ROOM

TOILET

SHOWER

CORRIDOR

STAFF

ENTRY

SPECIMEN

STORAGE

PROPERTY

EVIDENCE

GEAR

STORAGE

BIO

WASTE

AUTOPSY

SUPPLY

ROOM

SALLY

PORT

CASE

FILES

TOILET

MEP

VESTIBULE

TISSUE

RECOVERY

RECEIVING / PROCESSING

FORENSIC

TECH

OFFICE

DECOMP

COOLER

DECOMP

AUTOPSY

LOCKER

ROOM

SHOWER

HSKP

VESTIBULE

MAIN

COOLER

X-RAY

AUTOPSY

TRANSITION

LAUNDRY

RECEPTION

CORRIDOR

PATIO

FIRE

RISER

ELECTRICAL

NIGHT

ROOM

LOCKER

ROOM

302CORRIDOR

ROOM

20'-0"

12'-0"

9'-0"

12'-0"

10'-0"

9'-0"

9'-6"

10'-2"

10'-0"

9'-0" 9'-0"

12'-0"

9'-0" 9'-0" 9'-0"

9'-0"

9'-2"

19'-7"

DA Name: 1

DA Area: 1556.51

1 2 3 4 5 6 6.2

B.3

8 9

S100

S101

S102

S103

S104

S105

S106

S107

S108

S109

S110

S111

S112

S113

S114

S115

218 274

130 129

DA Name: 2

DA Area: 1027.73

S200 S201

S202 S203

S204 S205

S206

S207

S208

S209

S210

DA Name: 3

DA Area: 899.34

S300

S301

S302

S303

S304

S305

S306 S307

S308

S309 S310

FP2.0

DA Name: 4

DA Area: 1508.00

S400

S401

S402

S403

S404

S405

S406

S407

S408 S409

S410

S411

S412 S413

S414

DA Name: 5

DA Area: 1515.08

S500

S501

S502

S503

S504 S505

S506

S507

S508 S509 S510

S511

BOR

CHK

FP2.0

S211

10'-0"

1 1

2'-0" 0'-0"

4'-0" 8'-0"1'-0"

FIRE PROTECTION PLAN

SCALE: 1

8"= 1'-0"

16'-0"

PROJECT:

DATE:

CONTRACT NO.

DRAWN BY:

SCALE:

AREA:

11/03/22

3891 Tiger Bay Road

Daytona Beach, FL 32124

PAX2214-48

TN / DL

ORLANDO OFFICE

201 TECH DRIVE

SANFORD, FL 32771

PHONE: (321) 319-8850

FAX: (407) 549-2515

FP 2.0

AS NOTED

AHJ: BLDG PERMIT:VOLUSIA COUNTY

Volusia County

Office of the District Medical Examiner

FIRE PROTECTION PLAN

DeLand, FL 32720

123 West Indiana Ave

REVISIONS

OWNER:

BYDATE

Volusia County Florida

NO ALTERATIONS, REPRODUCTIONS OR USE OF THE CONTENTS

IN PART OR IN FULL MAY BE MADE WITHOUT THE PERMISSION

OF CENTURY FIRE PROTECTION, LLC.

GENERAL NOTES

Sanford, FL 32771

750 Monroe Road

GENERAL CONTRACTOR:

Wharton-Smith, Inc.

BUILDING SECTION F1

SCALE: 1

8"= 1'-0"

11/28/22 1 REVISED PER A/E REVIEW COMMENTS DL

C F P

A S

-B U

9/26/23 2 AS-BUILTS DL

AutoCAD SHX Text

PRE-ENGINEERED STEEL BUILDING FRAME

AutoCAD SHX Text

STEEL BAR JOIST & I-BEAM FRAMING (TYP)

AutoCAD SHX Text

BUILDING SLAB

AutoCAD SHX Text

TILT PANEL WALL

AutoCAD SHX Text GENERAL OVERHEAD NOTES: 1. DESIGN AND INSTALLATION SHALL BE IN ACCORDANCE WITH NFPA 13 (2016), FFPC 7TH DESIGN AND INSTALLATION SHALL BE IN ACCORDANCE WITH NFPA 13 (2016), FFPC 7TH EDITION, AND STATE AND LOCAL AUTHORITIES. 2. PAINTING AND/OR CORROSION RESISTANT COATINGS OF PIPE/FITTINGS ARE BY PAINTING AND/OR CORROSION RESISTANT COATINGS OF PIPE/FITTINGS ARE BY OTHERS AND TO MAINTAINED CONTINUALLY BY OWNER. SPRINKLERS AND VALVES SHALL NOT BE PAINTED OR COATED IN ANY MANNER EXCEPT BY MANUFACTURER. 3. ALARMS, WIRING, MONITORING, AND FIRE EXTINGUISHERS ARE EXISTING OR BY ALARMS, WIRING, MONITORING, AND FIRE EXTINGUISHERS ARE EXISTING OR BY OTHERS. 4. ALL ELECTRICAL WIRING OF DEVICES TO BE BY OTHERS. ALL ELECTRICAL WIRING OF DEVICES TO BE BY OTHERS. 5. ALL EQUIPMENT SHALL BE UL LISTED OR FM APPROVED AND RATED FOR MINIMUM 175 ALL EQUIPMENT SHALL BE UL LISTED OR FM APPROVED AND RATED FOR MINIMUM 175 PSI WORKING PRESSURE. 6. PROVIDE SPRINKLERS BENEATH OBSTRUCTIONS EXCEEDING 48" IN WIDTH. PROVIDE SPRINKLERS BENEATH OBSTRUCTIONS EXCEEDING 48" IN WIDTH. 7. PROVIDE SPRINKLER HEAD GUARDS ON SPRINKLERS IN ELECTRIC ROOMS, TELEPHONE PROVIDE SPRINKLER HEAD GUARDS ON SPRINKLERS IN ELECTRIC ROOMS, TELEPHONE ROOMS, ELEVATOR ROOMS & SHAFTS, LINEN CHUTES, AND ALL SPRINKLERS LESS THAN 7'-0" AFF. 8. NEW 1"-2" PIPE SHALL BE THREADED SCH. 40 BLACK STEEL PIPE WITH DUCTILE IRON NEW 1"-2" PIPE SHALL BE THREADED SCH. 40 BLACK STEEL PIPE WITH DUCTILE IRON THREADED FITTINGS. 9. NEW 2 " AND 6" AND LARGER PIPE SHALL BE ROLL GROOVED END SCH. 10 BLACK NEW 2 " AND 6" AND LARGER PIPE SHALL BE ROLL GROOVED END SCH. 10 BLACK 12" AND 6" AND LARGER PIPE SHALL BE ROLL GROOVED END SCH. 10 BLACK STEEL PIPE WITH WELDED OUTLETS AND DUCTILE IRON GROOVED FITTINGS U.N.O. 10. THIS PROJECT HAS BEEN COORDINATED THROUGH THE V.D.C. PROCESS, REVISIONS TO THIS PROJECT HAS BEEN COORDINATED THROUGH THE V.D.C. PROCESS, REVISIONS TO ALL MEP SYSTEMS ARE REQUIRED TO BE REVIEWED TO PREVENT IN FIELD CONFLICTS

AutoCAD SHX Text

11. NOTE 1 - NO A/S REQUIRED IN NONCOMBUSTIBLE CONCEALED SPACE ABOVE FUME / NOTE 1 - NO A/S REQUIRED IN NONCOMBUSTIBLE CONCEALED SPACE ABOVE FUME / GAS EXHAUST HOOD, PER NFPA #13 (2016 ed) 8.15.1.2.1 - 8.15.12.2.1

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

STYLE

AutoCAD SHX Text

FINISH

AutoCAD SHX Text

TEMP

AutoCAD SHX Text

K-FACTOR

AutoCAD SHX Text

NPT

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

MODEL

AutoCAD SHX Text

SPRINKLER HEAD LEGEND

AutoCAD SHX Text

RESPONSE

AutoCAD SHX Text

ESCUTCHEON

AutoCAD SHX Text

QUANTITY

AutoCAD SHX Text

AutoCAD SHX Text 5.6

AutoCAD SHX Text 1/2"

AutoCAD SHX Text

RELIABLE

AutoCAD SHX Text

QUICK

AutoCAD SHX Text

RA3415

AutoCAD SHX Text

FIFR

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

PENDENT

AutoCAD SHX Text 5.6

AutoCAD SHX Text 1/2"

AutoCAD SHX Text

RELIABLE

AutoCAD SHX Text

QUICK

AutoCAD SHX Text

SEMI-REC

AutoCAD SHX Text

RA1414

AutoCAD SHX Text

FIFR

AutoCAD SHX Text

CHROME

AutoCAD SHX Text 155°F

AutoCAD SHX Text

CONCEALED

AutoCAD SHX Text

SIN

AutoCAD SHX Text

WHITE COVERPLATE

AutoCAD SHX Text

TOTAL AUTOMATIC SPRINKLERS (A/S)

AutoCAD SHX Text

AutoCAD SHX Text 8.0

AutoCAD SHX Text 3/4"

AutoCAD SHX Text

RELIABLE

AutoCAD SHX Text

QUICK

AutoCAD SHX Text

RA3622

AutoCAD SHX Text

FIFRLO

AutoCAD SHX Text

WHITE

AutoCAD SHX Text 200°F

AutoCAD SHX Text N/A

AutoCAD SHX Text

UPRIGHT

AutoCAD SHX Text

AutoCAD SHX Text 5.6

AutoCAD SHX Text 1/2"

AutoCAD SHX Text

RELIABLE

AutoCAD SHX Text

QUICK

AutoCAD SHX Text

RA1425

AutoCAD SHX Text

FIFR

AutoCAD SHX Text

WHITE

AutoCAD SHX Text N/A

AutoCAD SHX Text

UPRIGHT

AutoCAD SHX Text

AutoCAD SHX Text 5.6

AutoCAD SHX Text 1"

AutoCAD SHX Text

RELIABLE

AutoCAD SHX Text

QUICK

AutoCAD SHX Text

RA5714

AutoCAD SHX Text

F3QR56

AutoCAD SHX Text

WHITE

AutoCAD SHX Text 286°F

AutoCAD SHX Text

2-PIECE

AutoCAD SHX Text

PENDENT

AutoCAD SHX Text A

AutoCAD SHX Text

PENDENT

AutoCAD SHX Text

AutoCAD SHX Text 8.0

AutoCAD SHX Text 3/4"

AutoCAD SHX Text

RELIABLE

AutoCAD SHX Text

QUICK

AutoCAD SHX Text

FIFRLO

AutoCAD SHX Text

WHITE

AutoCAD SHX Text 286°F

AutoCAD SHX Text N/A

AutoCAD SHX Text

UPRIGHT

AutoCAD SHX Text 165°F

AutoCAD SHX Text 155°F

AutoCAD SHX Text

RA3622

AutoCAD SHX Text

DRY BARREL

AutoCAD SHX Text

PENDENT

AutoCAD SHX Text 5.6

AutoCAD SHX Text 1/2"

AutoCAD SHX Text

RELIABLE

AutoCAD SHX Text

QUICK

AutoCAD SHX Text

SEMI-REC

AutoCAD SHX Text

RA1414

AutoCAD SHX Text

FIFR

AutoCAD SHX Text

WHITE

AutoCAD SHX Text 175°F

AutoCAD SHX Text

POLYESTER

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text 2h

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text +10'-6"

AutoCAD SHX Text +18'-10"

AutoCAD SHX Text +14'-9"

AutoCAD SHX Text +16'-6"

AutoCAD SHX Text +18'6

AutoCAD SHX Text +19'

AutoCAD SHX Text +20'

AutoCAD SHX Text +18'6

AutoCAD SHX Text +19'

AutoCAD SHX Text +20'

AutoCAD SHX Text +10'-6"

AutoCAD SHX Text +12'

AutoCAD SHX Text +18'-8"

AutoCAD SHX Text +13'-6"

AutoCAD SHX Text +17'-6"

AutoCAD SHX Text 1h

AutoCAD SHX Text +16'-6"

AutoCAD SHX Text +11'-3"

AutoCAD SHX Text +10'-6"

AutoCAD SHX Text

AutoCAD SHX Text +11'-4"

AutoCAD SHX Text 2h

AutoCAD SHX Text +11'-3"

AutoCAD SHX Text +10'-6

AutoCAD SHX Text +11'-0"

AutoCAD SHX Text +10'-6"

AutoCAD SHX Text +9'-6"

AutoCAD SHX Text +10'-6"

AutoCAD SHX Text +10'-6

AutoCAD SHX Text

AutoCAD SHX Text +10'-6

AutoCAD SHX Text +9'-6"

AutoCAD SHX Text +10'-6"

AutoCAD SHX Text +15'-0"

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text +9'

AutoCAD SHX Text

AutoCAD SHX Text +18'

AutoCAD SHX Text 1h

AutoCAD SHX Text +18'0

AutoCAD SHX Text +18'6

AutoCAD SHX Text +18'0

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text *12"

AutoCAD SHX Text

TOS

AutoCAD SHX Text 18'6

AutoCAD SHX Text

TOS

AutoCAD SHX Text 18'6

AutoCAD SHX Text

TOS

AutoCAD SHX Text 23'5h

AutoCAD SHX Text

TOS

AutoCAD SHX Text 23'5h

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text *12"

AutoCAD SHX Text

TOS

AutoCAD SHX Text +19'7h

AutoCAD SHX Text

TOS

AutoCAD SHX Text +18'7h

AutoCAD SHX Text

TOS

AutoCAD SHX Text +18'7h

AutoCAD SHX Text

TOS

AutoCAD SHX Text +14'3

AutoCAD SHX Text

TOS

AutoCAD SHX Text +14'3

AutoCAD SHX Text

TOS

AutoCAD SHX Text +13'6h

AutoCAD SHX Text

TOS

AutoCAD SHX Text +12'7h

AutoCAD SHX Text

TOS

AutoCAD SHX Text +19'2

AutoCAD SHX Text

TOS

AutoCAD SHX Text +19'2

AutoCAD SHX Text 2h

AutoCAD SHX Text 1h

AutoCAD SHX Text 2h

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text +10'6

AutoCAD SHX Text +11'

AutoCAD SHX Text +12'1h

AutoCAD SHX Text

AutoCAD SHX Text +11'

AutoCAD SHX Text

AutoCAD SHX Text +17'-6"

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text +12'

AutoCAD SHX Text

REMOTE AREA #5 - LH SEE HYD SUMMARY

AutoCAD SHX Text

REMOTE AREA #1 - OH1 SEE HYD CALC SUMMARY

AutoCAD SHX Text

REMOTE AREA #4 - LH SEE HYD CALC SUMMARY

AutoCAD SHX Text

REMOTE AREA #3 - OH1 SEE HYD CALC SUMMARY

AutoCAD SHX Text

REMOTE AREA #2 - OH1 SEE HYD CALC SUMMARY

AutoCAD SHX Text

NO A/S UNDER EXTERIOR CANOPY PER NFPA #13, 2016 SECTION 8.15.7.2

AutoCAD SHX Text

STRUCTURAL STEEL (TYP)

AutoCAD SHX Text

COLUMN LINE #8 START OF PRE-ENGINEERED BUILDING

AutoCAD SHX Text

FIRE SPRINKLER RISER - SEE DETAIL

AutoCAD SHX Text

FIRE SERVICE (BY OTHERS) - SEE UTILITY PLAN FOR CONTINUATION

AutoCAD SHX Text

FENCED IN OUTDOOR SPACE NO A/S

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

GAS SUPPRESSION IN THIS ROOM (BY OTHERS)

AutoCAD SHX Text

GAS SUPPRESSION IN THIS ROOM (BY OTHERS)

AutoCAD SHX Text +12'

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text +10'-6

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text +11'

AutoCAD SHX Text

AutoCAD SHX Text +11'6

AutoCAD SHX Text +10'6

AutoCAD SHX Text

AutoCAD SHX Text +9'-6"

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text 2h

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text 2h

AutoCAD SHX Text +11'6

AutoCAD SHX Text

AutoCAD SHX Text 2h

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

A/S BELOW DUCT

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

AutoCAD SHX Text 1h

AutoCAD SHX Text

A/S BELOW DUCT - TYP MEP ROOM

AutoCAD SHX Text

AutoCAD SHX Text 1-8

AutoCAD SHX Text 0-7h

AutoCAD SHX Text 1-0

AutoCAD SHX Text 1-10

AutoCAD SHX Text 8-9h

AutoCAD SHX Text 1-0

AutoCAD SHX Text 10-1

AutoCAD SHX Text 8-10

AutoCAD SHX Text 2-6

AutoCAD SHX Text 0-8h

AutoCAD SHX Text 1-10

AutoCAD SHX Text 4-7

AutoCAD SHX Text 1-2h

AutoCAD SHX Text 2-7

AutoCAD SHX Text 1-2h

AutoCAD SHX Text 2-3h

AutoCAD SHX Text 1-0

AutoCAD SHX Text 1-10

AutoCAD SHX Text 6-6

AutoCAD SHX Text 0-6

AutoCAD SHX Text 0-9h

AutoCAD SHX Text 2-3h

AutoCAD SHX Text 8-2

AutoCAD SHX Text 4-10

AutoCAD SHX Text 0-6

AutoCAD SHX Text 4-7h

AutoCAD SHX Text 2-6

AutoCAD SHX Text 4-1

AutoCAD SHX Text 0-4

AutoCAD SHX Text 0-6

AutoCAD SHX Text 10-0

AutoCAD SHX Text 10-3h

AutoCAD SHX Text 7-6

AutoCAD SHX Text 10-0

AutoCAD SHX Text 7-0h

AutoCAD SHX Text 5-1

AutoCAD SHX Text 5-11h

AutoCAD SHX Text 3-6

AutoCAD SHX Text 11-2h

AutoCAD SHX Text 3-6

AutoCAD SHX Text 10-0

AutoCAD SHX Text 7-6

AutoCAD SHX Text 2-4

AutoCAD SHX Text 1-3h

AutoCAD SHX Text 1-0

AutoCAD SHX Text 0-8h

AutoCAD SHX Text 1-10

AutoCAD SHX Text 0-11h

AutoCAD SHX Text 10-10

AutoCAD SHX Text 5-2h

AutoCAD SHX Text 0-7h

AutoCAD SHX Text 1-0

AutoCAD SHX Text 1-10

AutoCAD SHX Text 2-0h

AutoCAD SHX Text 0-9

AutoCAD SHX Text 8-0

AutoCAD SHX Text 6-7

AutoCAD SHX Text 1-6

AutoCAD SHX Text 0-9

AutoCAD SHX Text 3-7h

AutoCAD SHX Text 5-9

AutoCAD SHX Text 1-5

AutoCAD SHX Text 0-6

AutoCAD SHX Text 7-4

AutoCAD SHX Text 3-3

AutoCAD SHX Text 12-6

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1-4

AutoCAD SHX Text 1-7h

AutoCAD SHX Text 1-3

AutoCAD SHX Text 2-2h

AutoCAD SHX Text 1-3h

AutoCAD SHX Text 1-0

AutoCAD SHX Text 7-1

AutoCAD SHX Text 2-1h

AutoCAD SHX Text 15-1

AutoCAD SHX Text 3-10h

AutoCAD SHX Text 2-1h

AutoCAD SHX Text 2-6

AutoCAD SHX Text 4-9

AutoCAD SHX Text 1-8

AutoCAD SHX Text 12-3h

AutoCAD SHX Text 1-6

AutoCAD SHX Text 10-0

AutoCAD SHX Text 6-4h

AutoCAD SHX Text 0-7

AutoCAD SHX Text 0-9h

AutoCAD SHX Text 10-7

AutoCAD SHX Text 2-2h

AutoCAD SHX Text 11-0

AutoCAD SHX Text 1-4

AutoCAD SHX Text 17-5h

AutoCAD SHX Text 12-5h

AutoCAD SHX Text 0-9

AutoCAD SHX Text 11-4

AutoCAD SHX Text 12-0

AutoCAD SHX Text 12-5

AutoCAD SHX Text 17-1h

AutoCAD SHX Text 9-6

AutoCAD SHX Text 1-7h

AutoCAD SHX Text 6-3

AutoCAD SHX Text 3-2h

AutoCAD SHX Text 10-8

AutoCAD SHX Text 2-0h

AutoCAD SHX Text 0-10h

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 0-9h

AutoCAD SHX Text 0-11

AutoCAD SHX Text 3-9

AutoCAD SHX Text 12-0

AutoCAD SHX Text 2-0h

AutoCAD SHX Text 4-9h

AutoCAD SHX Text 5-6h

AutoCAD SHX Text 2-7h

AutoCAD SHX Text 8-2

AutoCAD SHX Text 12-3

AutoCAD SHX Text 1-1

AutoCAD SHX Text 3-10

AutoCAD SHX Text 1-1h

AutoCAD SHX Text 2-6

AutoCAD SHX Text 0-8

AutoCAD SHX Text 3-8h

AutoCAD SHX Text 1-9h

AutoCAD SHX Text 6-0h

AutoCAD SHX Text 8-11

AutoCAD SHX Text 4-0

AutoCAD SHX Text 10-0

AutoCAD SHX Text 11-10

AutoCAD SHX Text 2-2h

AutoCAD SHX Text 8-5h

AutoCAD SHX Text 2-7h

AutoCAD SHX Text 2-2h

AutoCAD SHX Text 4-0

AutoCAD SHX Text 5-5h

AutoCAD SHX Text 1-5

AutoCAD SHX Text 12-2

AutoCAD SHX Text 11-9

AutoCAD SHX Text 1-6h

AutoCAD SHX Text 10-0

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 1-7h

AutoCAD SHX Text 12-0

AutoCAD SHX Text 4-4h

AutoCAD SHX Text 4-8h

AutoCAD SHX Text 12-1h

AutoCAD SHX Text 5-6

AutoCAD SHX Text 1-8

AutoCAD SHX Text 3-5

AutoCAD SHX Text 11-9

AutoCAD SHX Text 11-5

AutoCAD SHX Text 3-1h

AutoCAD SHX Text 2-6

AutoCAD SHX Text 17-10h

AutoCAD SHX Text 0-8h

AutoCAD SHX Text 4-1

AutoCAD SHX Text 0-9

AutoCAD SHX Text 11-0

AutoCAD SHX Text 13-8

AutoCAD SHX Text 6-7

AutoCAD SHX Text 6-8h

AutoCAD SHX Text 3-1h

AutoCAD SHX Text 10-7

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 15-7

AutoCAD SHX Text 1-11

AutoCAD SHX Text 0-9

AutoCAD SHX Text 2-2h

AutoCAD SHX Text 12-5

AutoCAD SHX Text 12-1h

AutoCAD SHX Text 6-2

AutoCAD SHX Text 5-10h

AutoCAD SHX Text 12-0

AutoCAD SHX Text 8-7

AutoCAD SHX Text 1-7h

AutoCAD SHX Text 11-6

AutoCAD SHX Text 2-9

AutoCAD SHX Text 1-1h

AutoCAD SHX Text 52-1h

AutoCAD SHX Text 2-4

AutoCAD SHX Text 3-8

AutoCAD SHX Text 11-10

AutoCAD SHX Text 9-2h

AutoCAD SHX Text 3-1h

AutoCAD SHX Text 2-6

AutoCAD SHX Text 12-0

AutoCAD SHX Text 2-4h

AutoCAD SHX Text 4-5

AutoCAD SHX Text 4-6h

AutoCAD SHX Text 9-0h

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 3-8

AutoCAD SHX Text 3-3h

AutoCAD SHX Text 4-9h

AutoCAD SHX Text 1-2

AutoCAD SHX Text 6-4h

AutoCAD SHX Text 6-4

AutoCAD SHX Text 1-0

AutoCAD SHX Text 1-4h

AutoCAD SHX Text 3-10

AutoCAD SHX Text 0-10h

AutoCAD SHX Text 0-6

AutoCAD SHX Text 4-8

AutoCAD SHX Text 1-5h

AutoCAD SHX Text 10-4

AutoCAD SHX Text 4-5h

AutoCAD SHX Text 0-4

AutoCAD SHX Text 6-10h

AutoCAD SHX Text 1-7h

AutoCAD SHX Text 8-4h

AutoCAD SHX Text 3-5h

AutoCAD SHX Text 2-0h

AutoCAD SHX Text 2-1h

AutoCAD SHX Text 5-10h

AutoCAD SHX Text 3-5h

AutoCAD SHX Text 10-3

AutoCAD SHX Text 3-1h

AutoCAD SHX Text 2-6

AutoCAD SHX Text 5-3

AutoCAD SHX Text 5-7

AutoCAD SHX Text 1-5

AutoCAD SHX Text 12-0

AutoCAD SHX Text 2-0

AutoCAD SHX Text 1-1h

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 7-3

AutoCAD SHX Text 13-9h

AutoCAD SHX Text 4-8

AutoCAD SHX Text 1-5h

AutoCAD SHX Text 13-9h

AutoCAD SHX Text 8-4h

AutoCAD SHX Text 14-1h

AutoCAD SHX Text 2-7

AutoCAD SHX Text 3-1

AutoCAD SHX Text 14-0

AutoCAD SHX Text 1-7h

AutoCAD SHX Text 5-10

AutoCAD SHX Text 10-9

AutoCAD SHX Text 8-1

AutoCAD SHX Text 0-9

AutoCAD SHX Text 2-0h

AutoCAD SHX Text 1-11h

AutoCAD SHX Text 2-10

AutoCAD SHX Text 0-9

AutoCAD SHX Text 3-7

AutoCAD SHX Text 3-5h

AutoCAD SHX Text 2-6

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 12-0

AutoCAD SHX Text 2-0

AutoCAD SHX Text 1-1h

AutoCAD SHX Text 8-4h

AutoCAD SHX Text 4-8

AutoCAD SHX Text 1-5h

AutoCAD SHX Text 4-4

AutoCAD SHX Text 13-0

AutoCAD SHX Text 14-2h

AutoCAD SHX Text 20-0h

AutoCAD SHX Text 10-9

AutoCAD SHX Text 10-7h

AutoCAD SHX Text 4-1

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 1-7h

AutoCAD SHX Text 12-0h

AutoCAD SHX Text 3-3h

AutoCAD SHX Text 14-0

AutoCAD SHX Text 1-3h

AutoCAD SHX Text 1-1h

AutoCAD SHX Text 0-6

AutoCAD SHX Text 2-11

AutoCAD SHX Text 8-0

AutoCAD SHX Text 0-9

AutoCAD SHX Text 2-0h

AutoCAD SHX Text 1-11h

AutoCAD SHX Text 2-11h

AutoCAD SHX Text 12-0

AutoCAD SHX Text 0-6

AutoCAD SHX Text 2-11h

AutoCAD SHX Text 0-6h

AutoCAD SHX Text 3-8

AutoCAD SHX Text 3-2h

AutoCAD SHX Text 6-3h

AutoCAD SHX Text 7-4h

AutoCAD SHX Text 3-10

AutoCAD SHX Text 0-6

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 12-0

AutoCAD SHX Text 2-0

AutoCAD SHX Text 1-8

AutoCAD SHX Text 1-3h

AutoCAD SHX Text 3-11

AutoCAD SHX Text 13-0

AutoCAD SHX Text 8-0

AutoCAD SHX Text 1-7h

AutoCAD SHX Text 6-2h

AutoCAD SHX Text 7-3h

AutoCAD SHX Text 1-3h

AutoCAD SHX Text 1-1h

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 0-11

AutoCAD SHX Text 0-9

AutoCAD SHX Text 2-0h

AutoCAD SHX Text 1-11h

AutoCAD SHX Text 7-7

AutoCAD SHX Text 5-6h

AutoCAD SHX Text 4-9h

AutoCAD SHX Text 11-1

AutoCAD SHX Text 9-11h

AutoCAD SHX Text 8-0h

AutoCAD SHX Text 1-8h

AutoCAD SHX Text 12-0

AutoCAD SHX Text 1-7h

AutoCAD SHX Text 21-6h

AutoCAD SHX Text 12-6h

AutoCAD SHX Text 4-0h

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 2-2

AutoCAD SHX Text 9-5h

AutoCAD SHX Text 12-0

AutoCAD SHX Text 4-6h

AutoCAD SHX Text 0-11

AutoCAD SHX Text 4-6h

AutoCAD SHX Text 1-0

AutoCAD SHX Text 0-9

AutoCAD SHX Text 6-9

AutoCAD SHX Text 10-1

AutoCAD SHX Text 12-9h

AutoCAD SHX Text 3-0

AutoCAD SHX Text 6-0h

AutoCAD SHX Text 22-10h

AutoCAD SHX Text 4-6

AutoCAD SHX Text 5-11

AutoCAD SHX Text 4-5

AutoCAD SHX Text 0-6h

AutoCAD SHX Text 3-7

AutoCAD SHX Text 1-2h

AutoCAD SHX Text 1-3

AutoCAD SHX Text 1-0

AutoCAD SHX Text 3-8

AutoCAD SHX Text 6-9h

AutoCAD SHX Text 3-5h

AutoCAD SHX Text 2-11

AutoCAD SHX Text 1-7h

AutoCAD SHX Text 4-0h

AutoCAD SHX Text 2-5h

AutoCAD SHX Text 2-2

AutoCAD SHX Text 1-8h

AutoCAD SHX Text 1-1h

AutoCAD SHX Text 7-2h

AutoCAD SHX Text 3-3h

AutoCAD SHX Text 6-4h

AutoCAD SHX Text 0-6

AutoCAD SHX Text 4-5h

AutoCAD SHX Text 7-4h

AutoCAD SHX Text 1-11h

AutoCAD SHX Text 2-6

AutoCAD SHX Text 0-6

AutoCAD SHX Text 8-7

AutoCAD SHX Text 1-5

AutoCAD SHX Text 10-0

AutoCAD SHX Text 6-0h

AutoCAD SHX Text 8-0

AutoCAD SHX Text 2-11

AutoCAD SHX Text 10-0

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1-3h

AutoCAD SHX Text 0-9

AutoCAD SHX Text 9-5

AutoCAD SHX Text 11-11h

AutoCAD SHX Text 0-9

AutoCAD SHX Text 1-3h

AutoCAD SHX Text 0-6

AutoCAD SHX Text 8-7

AutoCAD SHX Text 1-5

AutoCAD SHX Text 10-0

AutoCAD SHX Text 6-0h

AutoCAD SHX Text 8-0

AutoCAD SHX Text 2-11

AutoCAD SHX Text 10-0

AutoCAD SHX Text 0-6

AutoCAD SHX Text 12-11h

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1-6

AutoCAD SHX Text 5-10h

AutoCAD SHX Text 1-1h

AutoCAD SHX Text 4-5h

AutoCAD SHX Text 4-0

AutoCAD SHX Text 3-0h

AutoCAD SHX Text 4-4h

AutoCAD SHX Text 8-0

AutoCAD SHX Text 2-11

AutoCAD SHX Text 10-0

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1-6

AutoCAD SHX Text 9-11h

AutoCAD SHX Text 10-8

AutoCAD SHX Text 3-0

AutoCAD SHX Text 2-11

AutoCAD SHX Text 0-6

AutoCAD SHX Text 7-4h

AutoCAD SHX Text 1-1h

AutoCAD SHX Text 4-0h

AutoCAD SHX Text 3-6

AutoCAD SHX Text 0-6

AutoCAD SHX Text 4-0

AutoCAD SHX Text 12-7h

AutoCAD SHX Text 1-2h

AutoCAD SHX Text 0-9

AutoCAD SHX Text 3-0

AutoCAD SHX Text 8-0

AutoCAD SHX Text 10-9h

AutoCAD SHX…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 18, 2025.