15851 DALLAS PARKWAY, SUITE 600 ADDISON, TX 75001

P: 214.561.8690

July 17, 2024

Vantage Report No. 2024-1170

City of Waxahachie c/o Mr. Dean Tubbs Project Manager Vidaurri Management Group, LLC 500 West 7th Street, Suite 1235 Fort Worth, TX 76102

Re: Asbestos Survey Report Waxahachie City Hall 401 S. Rogers Street Waxahachie, Texas 75165

Dear Mr. Tubbs:

Please find attached a copy of the asbestos survey report for the above-referenced site prepared by Vantage Environmental Services, LP (Vantage). This survey was performed in general accordance with approval to perform asbestos consulting services dated June 17, 2024.

We appreciate the opportunity to perform these services for The City of Waxahachie. Please contact Vantage at 214-561-8690 if you have questions regarding this information.

Sincerely, Vantage Environmental Services, LP

Kristi Warrington Managing Partner

Attachment

ASBESTOS SURVEY REPORT

Waxahachie, Texas 75165

Prepared for:

City of Waxahachie c/o Vidaurri Management Group, LLC

500 West 7th Street, Suite 1235 Fort Worth, TX 76102

Prepared By:

The Madison

15851 Dallas Parkway, Suite 600 Addison, TX 75001

214.561.8690

Francois Mahop – Asbestos Consultant License #10-5623

TABLE OF CONTENTS

1.0 GENERAL OVERVIEW

2.0 PROJECT DESCRIPTION

3.0 FIELD INVESTIGATION

4.0 RESULTS

5.0 CONCLUSIONS and RECOMMENDATIONS

Appendices A Analytical Results

B Sample Location Drawing C Chain of Custody D Licenses

ASBESTOS SURVEY

Waxahachie, Texas

1.0 GENERAL OVERVIEW

Vantage Environmental Services, LP (Vantage) conducted an asbestos survey of Waxahachie City Hall located at 401 S. Rogers Street in Waxahachie, Texas. The purpose of this project was to provide bulk sample collection and analysis of the suspect asbestos-containing materials (ACM) that would be impacted during renovation and/or demolition activities at the above referenced facility. The survey included collection of the minimum number of samples required by the Texas Department of State Health Services for the determination of asbestos content in building materials.

The materials sampled were assessed with respect to friability, accessibility, condition, damage potential and relation to the ventilation system. The inspection was performed at the request of Mr.

Dean Tubbs of Vidaurri Management Group, LLC.

2.0 PROJECT DESCRIPTION

The purpose of this survey was to provide bulk sampling of suspect asbestos containing materials within Waxahachie City Hall located at 401 S. Rogers Street in Waxahachie, Texas. A portion of the building will be renovated, and a portion will be demolished. The survey was conducted to support renovation and demolition plans provided by the Client.

3.0 FIELD INVESTIGATION

The survey was conducted on July 5, 2024 through July 10, 2024 by Francois Mahop, a Texas Department of State Health Services licensed asbestos consultant. The survey included observation of areas that may contain asbestos, and sampling of suspected asbestos-containing materials which would be impacted during renovation and/or demolition activities in the areas identified by the client.

The bulk samples were collected by the inspector using a utility knife or coring tool. Bulk samples were collected in a manner which reduced the potential for fiber release and exposure, using amended water and personal protective equipment where necessary. After recovery, samples were assigned a field number and placed in a sealed container. The samples were submitted to Cates Laboratories, Inc. for analysis. This laboratory is a successful participant in the National Institute of Standards and Technology National Voluntary Laboratory Accreditation Program (NVLAP).

The samples were analyzed for asbestos content using Polarized Light Microscopy (PLM) according to Environmental Protection Agencies (EPA) "Interim Method for the Determination of Asbestos in Bulk Insulation Samples". This technique characterizes the material’s refractive indices, fiber morphology, birefringence, extinction angle, sign of elongation and dispersion staining colors to detect asbestos. The percentage of asbestos was determined by visual estimation.

4.0 RESULTS

One hundred seventeen (117) samples of suspect asbestos containing materials (ACM) were obtained and analyzed for asbestos content. Two (2) of the samples collected were confirmed to contain regulated amounts of asbestos.

Four (4) of the samples collected were identified as containing <1% asbestos using PLM analysis.

As per state regulations, these 4 samples were then analyzed via the Point Count Method and through this method were confimed to contain less than 1% asbestos.

The following table summarizes the materials identified to contain asbestos. The analytical results for the samples analyzed are presented in Appendix A. The specific locations of samples collected are presented on the Sample Location Drawings in Appendix B.

TABLE 4.1 SAMPLES CONTAINING ASBESTOS

Material Sample No.

Location (Area)

Friable/ Non-

Friable

Damaged (Y/N)

Estimated Quantity

Floor Tile and Black Mastic

43 & 52 1950’s Building – Level 3 Throughout

NF N 900 SF

5.0 CONCLUSIONS and RECOMMENDATIONS

In summary, ACM was identified in the flooring materials located throughout the 3rd floor. These materials were in good condition and assessed as non-friable on the day of the inspection. If the facility is to be renovated and the scheduled activity will affect the integrity of the identified ACM, then these materials must be abated.

If renovation or demolition activities affect or disturb other suspect asbestos containing materials not sampled as part of this survey, then these materials must be analyzed for asbestos content or presumed to contain asbestos and abated. The abatement must be performed by a state licensed asbestos abatement contractor.

There are five response actions recognized for the control of an asbestos-related hazard: removal, enclosure, encapsulation, encasement, and operations and maintenance. None of these alternatives offer a universal solution, but all are applicable in certain cases. An integrated approach of immediate action, interim controls, and planned removal is the most cost-effective means of limiting the liability exposure of the Client. This approach also accomplishes the eventual removal of all asbestos-containing materials at the most opportune time from a financial standpoint.

The remainder of our recommendations are discussed below:

• It is recommended that the employees be made aware of the presence of the asbestos containing materials in their work area. The survey report should be adequate documentation for achieving this purpose.

• During renovation of the building, if the discussed asbestos-containing materials are to be disturbed by construction activities, their removal must be undertaken by a licensed asbestos contractor.

• An Operations and Maintenance (O&M) program should be instituted as an interim control measure to maintain the asbestos-containing materials in good condition.

This program should remain in effect until major renovations or demolition require removal, or until the materials change in condition. The program includes a one-time training class for your personnel who work adjacent to asbestos-containing materials.

• OSHA Hazard Communication Standards require notification and training of employees about asbestos, as well as other hazardous materials.

• An annual re-surveillance, which includes periodic air monitoring and a visual re-inspection assessment of the asbestos-containing materials. The purpose of which is to maintain your workplace in an asbestos hazard free manner.

It is important to note that state and federal regulations require notification prior to any demolition or renovation activities that may impact the condition of ACM in a building that affords public access or occupancy. Current regulations require that the abatement of friable and/or potentially friable ACM be performed by a licensed asbestos abatement contractor using proper engineering controls.

These activities must be performed in accordance with the Texas Asbestos Health Protection Rules and the National Emissions Standard for Hazardous Air Pollutants (NESHAP). These regulations are enforced by the Texas Department of State Health Services. Additionally, regulations for worker protection will apply.

This report describes only the conditions present at the time of our survey, in the areas surveyed.

Destructive sampling was not performed for access into wall cavities or other inaccessible areas.

We appreciate the opportunity to provide these services to The City of Waxahachie. Please feel free to contact us at (214) 561-8690 should you have any questions associated with this report.

Sincerely, Kristi Warrington Managing Partner

Manuel Rangel Principal

APPENDIX A

Analytical Reports

PLM REPORT SUMMARY

Cates Laboratories NVLAP Lab No. 200569-0

1339 Motor Circle TDSHS License No. 30-0287

Dallas, Texas 75207 (214) 920-5006

Client: Vantage Environmental Services, LP Lab Job No.: PLM-37698 Project (Line 1): Waxahachie City Hall Renovation Set No.: 54173 Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 1 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Lab

Sample No.

Client

Field I.D.

Sample Description/Location Asbestos Content

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced except in full.

CL1275148

Carpet/Glue - West Side Office, Hallway, 1st Floor

None Detected - Carpet

None Detected - Yellow Mastic

CL1275149

CL1275150

CL1275151

Floor Tile/Mastic - West Side, Large Office, 1st Floor

None Detected - Floor Tile

CL1275152

Floor Tile/Glue - West Side, Large Office, 1st Floor

CL1275153

Floor Tile/Glue - West Side, Large Office, 1st Floor

CL1275154

Floor Tile/Glue - East Side Office, 1st Floor

CL1275155

CL1275156

CL1275157

Drywall/Texture/Joint Compound - Middle Wall, West Side, 1st Floor

None Detected - Paint Texture

None Detected - Joint Tape

None Detected - Joint Compound

None Detected - Paper

None Detected - Wallboard Material

CL1275158

Drywall/Texture/Joint Compound - Middle Wall, Northwest Side, 1st

Floor

None Detected - Joint Compound

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 2 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275159

Drywall/Texture/Joint Compound - East Side, 1st Floor

None Detected - Joint Compound

CL1275160

Ceiling Tile - Hallway, West Side, 1st Floor

None Detected

CL1275161

Ceiling Tile - Hallway, West Side, 1st Floor

CL1275162

Ceiling Tile - Hallway, East Side, 1st Floor

CL1275163

Plaster Ceiling w/Paint Texture - East Side Hallway, 1st Floor

None Detected - Plaster

CL1275164

CL1275165

CL1275166

Ceramic Tile/Mortar - Level 2, Women's Restroom

None Detected - Ceramic Tile

None Detected - Mortar

CL1275167

Ceramic Tile/Mortar - Level 2, Women's Restroom

None Detected - Grout

CL1275168

Ceramic Tile/Mortar - Level 2, Men's Restroom

CL1275169

Ceramic Tile/Drywall - Level 2, Women's Restroom

None Detected - Tan Mastic

CL1275170

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 3 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275171

CL1275172

Drywall/Texture/Joint Compound - Level 2, Women's Restroom

None Detected - Joint Compound

CL1275173

Drywall/Texture/Joint Compound - on Ceiling, Level 2, Women's

Restroom

None Detected - Joint Compound

CL1275174

Drywall/Texture/Joint Compound - Level 2, Wall by Door, Men's

Restroom

None Detected - Joint Compound

CL1275175

Drywall/Texture/Joint Compound - Level 2, AC Room

None Detected - Plaster Topcoat

CL1275176

Drywall/Texture/Joint Compound - Level 2, Water Heater Room

None Detected - Joint Compound 1

<1% Chrysotile - Joint Compound 2

None Detected - Paper

None Detected - Wallboard Material

(by PLM)

0.25% Chrysotile - Joint Compound 2

(by Point Count)

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 4 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275177

Drywall/Texture/Joint Compound - Level 2, Small Storage Room

None Detected - Joint Compound

CL1275178

Linoleum Tile/Glue - Kitchen, 2nd Level

None Detected - Flooring

CL1275179

CL1275180

CL1275181

Floor Tile on Wood - Level 2, Water Heater Room

CL1275182

CL1275183

CL1275184

Drywall/Texture/Joint Compound - Level 2, Conference Room

None Detected - Joint Compound 1

<1% Chrysotile - Joint Compound 2

None Detected - Paper

None Detected - Wallboard Material

(by PLM)

0.50% Chrysotile - Joint Compound 2

CL1275185

Drywall/Texture/Joint Compound - Level 2, Office

None Detected - Joint Compound

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 5 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275186

Drywall/Texture/Joint Compound - Level 2, Office

None Detected - Joint Compound 1

<1% Chrysotile - Joint Compound 2

None Detected - Paper

None Detected - Wallboard Material

(by PLM)

<0.25% Chrysotile - Joint Compound 2

CL1275187

Ceiling Tile - Level 2, Water Heater Room

CL1275188

Ceiling Tile - Level 2, Hallway

CL1275189

Ceiling Tile - Level 2, Office

CL1275190

Floor Tile/Mastic on Wood - Level 3, Northwest Storage Room

3% Chrysotile - Floor Tile

5% Chrysotile - Black Mastic

CL1275191

Floor Tile/Mastic on Wood - Level 3, Hallway

Not Analyzed - Positive Stop

CL1275192

Floor Tile/Mastic on Wood - Level 3, Southwest Storage Room

CL1275193

Drywall/Texture/Joint Compound - Level 3, Northwest Storage Room

<1% Chrysotile - Paint Texture

(by PLM)

0.25% Chrysotile - Paint Texture

CL1275194

Drywall/Texture/Joint Compound - Level 3, Hallway

None Detected - Paint Layer

CL1275195

Drywall/Texture/Joint Compound - Level 3, Hallway

CL1275196

Ceiling Plaster/Texture - Level 3, Hallway

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 6 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275197

CL1275198

CL1275199

Floor Tile/Mastic - Level 3, Northeast Office

5% Chrysotile - Floor Tile

5% Chrysotile - Black Mastic

CL1275200

CL1275201

CL1275202

Drywall/Texture/Joint Compound - Level 3, Northeast Office

CL1275203

None Detected - Joint Compound

CL1275204

CL1275205

TSI Pipe Insulation - Level 3, Northeast Office

None Detected - Wrap

None Detected - Insulation

CL1275206

TSI Pipe Insulation - Level 3, Northeast Office

CL1275207

TSI Pipe Insulation - Level 3, Restroom

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 7 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275208

White Mastic on AC Duct - Attic/Roof

CL1275209

CL1275210

CL1275211

Insulation - Attic/Roof

CL1275212

CL1275213

CL1275214

CL1275215

CL1275216

CL1275217

Ceramic Flooring/Mortar - Reception Area, 1st Floor

CL1275218

CL1275219

CL1275220

Floor Tile/Glue - Waiting Room, 1st Floor

CL1275221

CL1275222

CL1275223

Cove Base/Glue/Drywall - Hallway, 1st Floor

None Detected - Cove Base

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 8 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275224

CL1275225

CL1275226

Drywall/Texture/Joint Compound - West Side Office, 1st Floor

None Detected - Joint Compound

CL1275227

Drywall/Texture/Joint Compound - Reception Area Office, 1st Floor

None Detected - Joint Compound

CL1275228

Drywall/Texture/Joint Compound - South Side Office, 1st Floor

None Detected - Joint Compound

CL1275229

Drywall/Texture/Joint Compound - Hallway by IT Room, 1st Floor

None Detected - Joint Compound

CL1275230

Drywall/Texture/Joint Compound - IT Room, 1st Floor

None Detected - Joint Compound

CL1275231

Drywall/Texture/Joint Compound - Kitchen, 1st Floor

None Detected - Joint Compound

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 9 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275232

Hard Ceiling/Drywall/Texture - Hallway, 1st Floor

None Detected - Joint Compound

CL1275233

None Detected - Joint Compound

CL1275234

None Detected - Joint Compound

CL1275235

Ceiling Tile - Hallway, 1st Floor

CL1275236

Ceiling Tile - Office, 1st Floor

CL1275237

Ceiling Tile - Open Space, East Side, 1st Floor

CL1275238

Ceramic Tile/Mortar - Women's Handicap Restroom, 1st Floor

CL1275239

CL1275240

CL1275241

Drywall/Texture/Joint Compound - Women's Handicap Restroom, 1st

Floor

None Detected - Joint Compound

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 10 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275242

Drywall/Texture/Joint Compound - Women's Handicap Restroom, Ceiling, 1st Floor

None Detected - Joint Compound

CL1275243

Drywall/Texture/Joint Compound - Women's Handicap Restroom, Wall

Area, 1st Floor

None Detected - Joint Compound

CL1275244

Drywall/Texture/Joint Compound - Offices, 2nd Floor

None Detected - Joint Compound

CL1275245

None Detected - Joint Compound

CL1275246

None Detected - Joint Compound

CL1275247

Wallpaper/Drywall/Joint Compound - Large Conference Room, Level 2

None Detected - Joint Compound

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 11 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275248

None Detected - Joint Compound

CL1275249

None Detected - Joint Compound

CL1275250

Drywall Ceiling/Texture/Joint Compound - Cashier Window, Level 2

None Detected - Joint Compound

CL1275251

Drywall Ceiling/Texture/Joint Compound - Cashier Window Area, Level

None Detected - Joint Compound

CL1275252

Drywall Ceiling/Texture/Joint Compound - Cashier Window Area, Level

None Detected - Joint Compound

CL1275253

Ceiling Tile - Small Office by Cashier Window Area, Level 2

CL1275254

CL1275255

CL1275256

Exterior Caulking on Base of Brick - Level 2, West Entrance

CL1275257

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1

Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS) EPA Method 600/R-93/116 Page 12 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein. The results are summarized below:

Client

These samples were analyzed by layers. The overall percent asbestos for the sample is reported when relevant. The EPA considers a material to be asbestos containing only if it contains greater than one percent asbestos by Calibrated Visual Area Estimation (CVAE). EPA regulations also indicate that Regulated Asbestos Containing

Materials (RACM) – materials that are friable or may become friable – be further analyzed by point counting when the results indicate less than ten percent asbestos by CVAE. CatesLab utilizes CVAE on a routine basis and does not include point counting unless specifically requested by the client. The results may not be reproduced

CL1275258

CL1275259

Exterior Brick w/Paint Texture - Level 2, West Entrance

None Detected - Brick

CL1275260

CL1275261

CL1275262

Exterior Weatherproofing/Brick - Level 2, Southeast Corner

None Detected - Weatherproofing

CL1275263

CL1275264

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Report Date: 7/16/2024 Project No: 2024-1170 Sample Date: 7/5/2024 Identification: Asbestos, Bulk Sample Analysis Version: PC1 Test Method: Polarized Light Microscopy/Dispersion Staining (PLM/DS)

EPA Method 600/R-93/116 Page 13 of 13

On 7/11/2024, one-hundred seventeen (117) bulk samples were submitted by a representative of Vantage Environmental Services, LP for asbestos analysis by PLM/DS.

Copies of the lab data sheets are attached; additional information may be found therein.

STATEMENT OF LABORATORY ACCREDITATION

The samples were analyzed in general accordance with the procedures outlined in the U.S. EPA Interim Method for the Determination of Asbestos in Bulk Insulation Samples as found in 40 CFR, Part 763, Subpart E, Appendix E (formerly Subpart F, Appendix A), or the current U.S. EPA method (EPA Method 600/R-93/116) for the analysis of asbestos in building materials, by polarized light microscopy. The results of each bulk sample relate only to the material tested and the results shall not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Specific questions concerning bulk sample results shall be directed to the Laboratory Director.

Analyst:

Chris Munch

Laboratory Director: John R. Cates, P.G.

Approved Signatory:

TESTING

NVLAP LAB CODE 200569-0

Bulk Asbestos Analysis Sheet

Cates Laboratories EPA Method 600/R-93/116 NVLAP Lab No. 200569-0

Client: Vantage Environmental Services, LP Lab Proj #: PLM-37698

Project (Line 1): Waxahachie City Hall Renovation Set #: 54173

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275148 Field ID #: 1 Page 1 of 1

Sample Description: Carpet/Glue - West Side Office, Hallway, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275148 kkkx Layer 1 Carpet Stereoscopic Examination 1 1275148 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample 0 Grey Fibrous No 90 ND 98 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Synthetic Fibers 90 Monofilaments 1 Binders 10 Non-fibrous 1 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 2 Yellow Mastic Stereoscopic Examination 2 1275148 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Yellow-Tan Rubbery Yes ND ND 2 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glue Binders 100 Non-fibrous 2 Prep/treatment: heat / melt Asbestos Content: None Detected zzz

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275149 Field ID #: 2 Page 1 of 1

Sample Description: Carpet/Glue - West Side Office, Hallway, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275149 kx Layer 1 Carpet Stereoscopic Examination 1 1275149 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample 0 Grey Fibrous No 90 ND 98 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Synthetic Fibers 90 Monofilaments 1 Binders 10 Non-fibrous 1 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 2 Yellow Mastic Stereoscopic Examination 2 1275149 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Yellow-Tan Rubbery Yes ND ND 2 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glue Binders 100 Non-fibrous 2 Prep/treatment: heat / melt Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275150 Field ID #: 3 Page 1 of 1

Sample Description: Carpet/Glue - West Side Office, Hallway, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275150 kx Layer 1 Carpet Stereoscopic Examination 1 1275150 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample 0 Grey Fibrous No 90 ND 98 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Synthetic Fibers 90 Monofilaments 1 Binders 10 Non-fibrous 1 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 2 Yellow Mastic Stereoscopic Examination 2 1275150 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Yellow-Tan Rubbery Yes ND ND 2 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glue Binders 100 Non-fibrous 2 Prep/treatment: heat / melt Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275151 Field ID #: 4 Page 1 of 1

Sample Description: Floor Tile/Mastic - West Side, Large Office, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275151 kx Layer 1 Floor Tile Stereoscopic Examination 1 1275151 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Hard Yes ND ND 99 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Aggregate/Vinyl Binders 100 Non-fibrous 1 Prep/treatment: heat / melt Asbestos Content: None Detected

Layer 2 Yellow Mastic Stereoscopic Examination 2 1275151 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Yellow-Tan Rubbery Yes ND ND 1 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glue Binders 100 Non-fibrous 2 Prep/treatment: heat / melt Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275152 Field ID #: 5 Page 1 of 1

Sample Description: Floor Tile/Glue - West Side, Large Office, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275152 kx Layer 1 Floor Tile Stereoscopic Examination 1 1275152 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Hard Yes ND ND 99 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Aggregate/Vinyl Binders 100 Non-fibrous 1 Prep/treatment: heat / melt Asbestos Content: None Detected

Layer 2 Yellow Mastic Stereoscopic Examination 2 1275152 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Yellow-Tan Rubbery Yes ND ND 1 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glue Binders 100 Non-fibrous 2 Prep/treatment: heat / melt Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275153 Field ID #: 6 Page 1 of 1

Sample Description: Floor Tile/Glue - West Side, Large Office, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275153 kx Layer 1 Floor Tile Stereoscopic Examination 1 1275153 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Hard Yes ND ND 99 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Aggregate/Vinyl Binders 100 Non-fibrous 1 Prep/treatment: heat / melt Asbestos Content: None Detected

Layer 2 Yellow Mastic Stereoscopic Examination 2 1275153 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Yellow-Tan Rubbery Yes ND ND 1 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glue Binders 100 Non-fibrous 2 Prep/treatment: heat / melt Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275154 Field ID #: 7 Page 1 of 1

Sample Description: Floor Tile/Glue - East Side Office, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275154 kx Layer 1 Floor Tile Stereoscopic Examination 1 1275154 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Beige Hard Yes ND ND 99 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Aggregate/Vinyl Binders 100 Non-fibrous 1 Prep/treatment: heat / melt Asbestos Content: None Detected

Layer 2 Yellow Mastic Stereoscopic Examination 2 1275154 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Yellow-Tan Rubbery Yes ND ND 1 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glue Binders 100 Non-fibrous 2 Prep/treatment: heat / melt Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275155 Field ID #: 8 Page 1 of 1

Sample Description: Floor Tile/Glue - East Side Office, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275155 kx Layer 1 Floor Tile Stereoscopic Examination 1 1275155 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Beige Hard Yes ND ND 99 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Aggregate/Vinyl Binders 100 Non-fibrous 1 Prep/treatment: heat / melt Asbestos Content: None Detected

Layer 2 Yellow Mastic Stereoscopic Examination 2 1275155 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Yellow-Tan Rubbery Yes ND ND 1 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glue Binders 100 Non-fibrous 2 Prep/treatment: heat / melt Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275156 Field ID #: 9 Page 1 of 1

Sample Description: Floor Tile/Glue - East Side Office, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275156 kx Layer 1 Floor Tile Stereoscopic Examination 1 1275156 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Beige Hard Yes ND ND 99 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Aggregate/Vinyl Binders 100 Non-fibrous 1 Prep/treatment: heat / melt Asbestos Content: None Detected

Layer 2 Yellow Mastic Stereoscopic Examination 2 1275156 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Yellow-Tan Rubbery Yes ND ND 1 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glue Binders 100 Non-fibrous 2 Prep/treatment: heat / melt Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275157 Field ID #: 10 Page 1 of 1

Sample Description: Drywall/Texture/Joint Compound - Middle Wall, West Side, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275157 kx Layer 1 Paint Texture Stereoscopic Examination 1 1275157 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Blocky Yes ND ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Aggregate/Binders/Paint 100 Non-fibrous 1 Prep/treatment: solvent dissolution Asbestos Content: None Detected

Layer 2 Joint Tape Stereoscopic Examination 2 1275157 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Cream Fibrous Yes 100 ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Cellulose Fibers 100 ribbons high 2 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 3 Joint Compound Stereoscopic Examination 3 1275157 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Blocky Yes ND ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Perlite 5 Glass Foam 0 3 Aggregate/Binders 95 Non-fibrous 3 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 4 Paper Stereoscopic Examination 4 1275157 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Tan Fibrous Yes 100 ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Cellulose Fibers 100 ribbons high 4 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 5 Wallboard Material Stereoscopic Examination 5 1275157 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Blocky Yes 1 ND 60 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glass Fibers 1 straight none none 5 Aggregate 4 Non-fibrous 5 Gypsum Binders 95 Non-fibrous 5 Prep/treatment: mechanical separation Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275158 Field ID #: 11 Page 1 of 1

Sample Description: Drywall/Texture/Joint Compound - Middle Wall, Northwest Side, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275158 kx Layer 1 Paint Texture Stereoscopic Examination 1 1275158 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Blocky Yes ND ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Aggregate/Binders/Paint 100 Non-fibrous 1 Prep/treatment: solvent dissolution Asbestos Content: None Detected

Layer 2 Joint Tape Stereoscopic Examination 2 1275158 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Cream Fibrous Yes 100 ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Cellulose Fibers 100 ribbons high 2 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 3 Joint Compound Stereoscopic Examination 3 1275158 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Blocky Yes ND ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Aggregate/Binders 100 Non-fibrous 3 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 4 Paper Stereoscopic Examination 4 1275158 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Tan Fibrous Yes 100 ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Cellulose Fibers 100 ribbons high 4 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 5 Wallboard Material Stereoscopic Examination 5 1275158 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Blocky Yes 1 ND 60 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Cellulose Fibers 1 ribbons high 5 Aggregate 4 Non-fibrous 5 Gypsum Binders 95 Non-fibrous 5 Prep/treatment: mechanical separation Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275159 Field ID #: 12 Page 1 of 1

Sample Description: Drywall/Texture/Joint Compound - East Side, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275159 kx Layer 1 Paint Texture Stereoscopic Examination 1 1275159 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Blocky Yes ND ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Aggregate/Binders/Paint 100 Non-fibrous 1 Prep/treatment: solvent dissolution Asbestos Content: None Detected

Layer 2 Joint Tape Stereoscopic Examination 2 1275159 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Cream Fibrous Yes 100 ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Cellulose Fibers 100 ribbons high 2 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 3 Joint Compound Stereoscopic Examination 3 1275159 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Blocky Yes ND ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Perlite 5 Glass Foam 0 3 Aggregate/Binders 95 Non-fibrous 3 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 4 Paper Stereoscopic Examination 4 1275159 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Tan Fibrous Yes 100 ND 10 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Cellulose Fibers 100 ribbons high 4 Prep/treatment: mechanical separation Asbestos Content: None Detected

Layer 5 Wallboard Material Stereoscopic Examination 5 1275159 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 White Blocky Yes 1 ND 60 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Glass Fibers 1 straight none none 5 Aggregate 4 Non-fibrous 5 Gypsum Binders 95 Non-fibrous 5 Prep/treatment: mechanical separation Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #: 2024-1170 Sample #: CL1275160 Field ID #: 13 Page 1 of 1

Sample Description: Ceiling Tile - Hallway, West Side, 1st Floor

Comments: Analyst: Chris Munch Date Analyzed: 7/13/2024

Lab Job #: PLM-37698 Sample #: CL1275160 kx Layer 1 Ceiling Tile Stereoscopic Examination 1 1275160 Color Texture Homogeneous? % Fibrous % Asbestos % of Sample -1 Beige w/wht pt Fibrous Yes 60 ND 100 PLM Examination:

Color/ Parallel Perpendicular Extinction Sign of Components % +/- Morphology Pleochroism Ref. Index Ref. Index Biref Angle Elongation Cellulose Fibers 30 ribbons high 1 Mineral Wool Fibers 30 Rods 0 1 Perlite 30 Glass Foam 0 1 Binders / Paint 10 Non-fibrous 1 Prep/treatment: mechanical separation Asbestos Content: None Detected

Project (Line 2): 401 S. Rogers St., Waxahachie, TX Project #:…