04C_Appendix_C.3_Specifications_(Detroit).pdf

PDF 2 MB Posted Dec 11, 2018

Attached to: Department of Veteran Affairs Detroit Domiciliary 32, 248 ABOA ANSI/BOMA Square Feet Detroit, MI
Solicitation number: VA10116R0143
Issued by: Department of Veterans Affairs Headquarters

About this file

From the source

VA101-16-R-0143 04C Appendix C.3 Specifications (Detroit).pdf

View the file

Other files

File	Type	Posted
VA101-16-R-0143-015.pdf	PDF	Mar 22, 2019
VA101-16-R-0143-013.docx	DOCX document	Mar 22, 2019
VA101-16-R-0143-014.pdf	PDF	Mar 22, 2019
VA101-16-R-0143-012.pdf	PDF	Mar 12, 2019
VA101-16-R-0143-011.docx	DOCX document	Mar 12, 2019
VA101-16-R-0143-009.docx	DOCX document	Feb 20, 2019
VA101-16-R-0143-010.pdf	PDF	Feb 20, 2019
RLP_Amendment_No._1_(Detroit).pdf	PDF	Jan 9, 2019
RLP_Amd_1,_Exhibit_A_-_Pre-Bid_Presentation_(Detroit).pdf	PDF	Jan 9, 2019
VA101-16-R-0143_5.docx	DOCX document	Jan 9, 2019
VA10116R0143_SF30_A1.pdf	PDF	Jan 9, 2019
04B_Appendix_C.2_-_Security_Requirements_FSL_II_(Detroit).pdf	PDF	Dec 11, 2018
04A_Appendix_C.1_-_Agency_Specific_Requirements_(Detroit).pdf	PDF	Dec 11, 2018
19_GSA_Form_3516_-_Solicitation_Provisions.pdf	PDF	Dec 11, 2018
12_Form_1217.pdf	PDF	Dec 11, 2018
10_GSA_Form_1364_(Detroit).docx	DOCX document	Dec 11, 2018
VA101-16-R-0143_4.docx	DOCX document	Dec 11, 2018
11-Attachment_No._1_to_GSA_Form_1364_(Detroit).xlsx	XLSX spreadsheet	Dec 11, 2018
03_Appendix_B_-_Conceptual_Design_(Detroit).pdf	PDF	Dec 11, 2018
09_Offeror_Proposal_Compliance_Matrix_(Detroit).docx	DOCX document	Dec 11, 2018
25A_Labor_Standards_(Detroit).pdf	PDF	Dec 11, 2018
21_GSA_Form_12000_-_Prelease_FPLS_Evaluation.docx	DOCX document	Dec 11, 2018
22_Small_Business_Subcontracting_Plan.docx	DOCX document	Dec 11, 2018
18_VA_Handbook_6500.6_App_C.pdf	PDF	Dec 11, 2018
01B_Lease_Form_(Detroit).pdf	PDF	Dec 11, 2018
20_GSA_Form_3517B_-_General_Clauses.pdf	PDF	Dec 11, 2018
05_Appendix_D_-_Standards_and_Codes_(Detroit).pdf	PDF	Dec 11, 2018
13_VA_Form_10091.pdf	PDF	Dec 11, 2018
17_VA_Handbook_6500_App_D.pdf	PDF	Dec 11, 2018
16_GSA_Form_527_Contractor_Qualifications.pdf	PDF	Dec 11, 2018
07_Appendix_F_-_Janitorial___Pest_Control_(Detroit).pdf	PDF	Dec 11, 2018
02A_Appendix_A.1_-_Program_for_Design_(Detroit).pdf	PDF	Dec 11, 2018
24_Contractor_Confidentiality_Certificate_(Detroit).docx	DOCX document	Dec 11, 2018
25B_Wayne_County_Wage_Determination_(as_of_12-10-2018).pdf	PDF	Dec 11, 2018
08_Offering_Entity_Acknowledgement_Form_(Detroit).docx	DOCX document	Dec 11, 2018
06_Appendix_E_-_IT_Specifications.pdf	PDF	Dec 11, 2018
26-Pre-bid_registration_(Detroit).docx	DOCX document	Dec 11, 2018
14_Past_Performance_Survey_(Detroit).docx	DOCX document	Dec 11, 2018
15_SF_330_Architect-Engineer_Qualifications.pdf	PDF	Dec 11, 2018
01A_RLP_Detroit_Domiciliary_FINAL.pdf	PDF	Dec 11, 2018
02B_Appendix_A.2_-_Project_Room_Contents_(Detroit).pdf	PDF	Dec 11, 2018

Show all 41

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

VA DOMICILIARY RLP No. VA-101-16-R-0143 DETROIT, MICH. Appendix C.3

Lessor: ________ Government: ________

Specifications

This appendix includes specifications that are a component of the Agency Specific Requirements.

The following chart enumerates all the Parts that comprise Appendix C.3.

SPECIFICATION

No. of Pages (excluding index pages)

Part A – Security Door Opening Matrix 2 Part B – Security System Application Matrix 2 Part C – Interior Finishes and Doors Schedule 4 Part D – Interior Finishes and Doors Detail 21 Part E – Electrical Utility Square Foot Load Summary 1 Part F – Electrical EPSS Square Foot Load Summary 1 Part G – HVAC Loads 1 Part H – Typical Room HVAC Loads 1

Lessor: ________ Government: ________

Appendix C.3, Part A:

Security Door Opening Matrix

Page A-1 Security Door Opening Matrix

Security Door Opening Matrix Department of Veterans Affairs

The matrix below is organized alphabetically by building or facility type. Within each building or facility type, the security door openings are separated into exterior and interior (highlighted in blue) locations and are also listed alphabetically within each of those categories.

D oo r T yp es

S D

O H ar dw ar e

Fa ci lit y

C la ss ifi ca tio n

Access Control Monitoring Notes

Facility Type/Door Location

C ar d R ea de r

Fa il

S af e

Fa il

S ec ur e

K ey

S to ra ge

B ox

A N

S I/B

M H

A Fu nc tio n

M ag ne tic

L oc k

E le ct ric

S tri ke

R eq ue st to E xi t

E xi t B ut to n or C ra sh ba r

In te gr at ed to

Lo ck

o r

B io m et ric s

D oo r C on ta ct

S w ith

A ud ib le a nd

R em ot e

A la rm

Fo rc e or

H ol d-op en A la rm

Egress A, C 104 New/Exist F01 Exit

X X 2

Loading Dock (Swinging) A, C 107 Exist F07

Store-room

X X

Public Entrances A, B, C, D 101 New/Exist X X X X X X X 1, 4

Staff A, B, C, D 103 New/Exist X X F04 Entry

X X X X X 2, 3, 4

Storage A, C 109 New/Exist X F07

Store-room

7, 8

Utility Connections (Commercial Power and Med Gas Stor) A, C 111 New/Exist F07

Store-room

X X 8

Utility Connections (Demarc Room) A, C 113 New/Exist F07

Store-room

Building Systems Room from Corridor A, C 228 New/Exist X X X F07

Store-room

X X X 8, 18

Central Linen Storage and Distribution from Corridor A, C 215 New/Exist X X X X

Elevator Equipment Room from Corridor A, C 228 New/Exist X X X F07

Store-room

X X X 8, 18

Lobby to building interior A, B, C, D 201 New/Exist F04 Entry

Mechanical and Electrical Rooms from Corridor A, C 228 New/Exist X X X F07

Store-room

X X X 8, 18

Office of Information and Technology from Corridor A, C 216 New/Exist X X F07

Store-room

X X X X X

Telecommunications Rooms and Electric Closets from Corridor A, C 218 New/Exist F07

Store-room

Notes

1. Magnetic lock or electric strike 9. FEBR (30 minutes with Tools/UL 752, Level 3) 18. All locks shall be field selectable Fail Safe/Fail Secure.

The term Fail Secure indicates the lock will remain secure when in fail mode. Fail Secure shall always permit emergency egress functions of the lock. In these circumstances an bypass feature; such as, conventional key and lock, shall be provided to allow access from the unsecure side. Magnetic locks shall not fail secure.

2. Alarmed exit 10. One-way glass

Page A-2 Security Door Opening Matrix

3. Magnetic lock, electric strike or ANSI F04 Entrance lock 11. 30 minute forced entry

4. Intercom to reception, information or guard desk 12. 15 minute forced entry

5. Manual operation during power outage 13. FEBR (15 minutes/Level III)

6. Intercom to guard station 14. ANSI F07 Storeroom lock and magnetic lock or electric strike

7. Card reader or ANSI F07 Storeroom lock 15. Elevator door control

8. No glazing 16. Glazed door, monitor door at Nurses' Station

17. Padlock from the inside

All locks shall be field selectable Fail Safe/Fail Secure.

Security Door Opening Matrix Department of Veterans Affairs

D oo r T yp es

S D

O H ar dw ar e

Fa ci lit y

C la ss ifi ca tio n

Access Control Monitoring Notes

Facility Type/Door Location

C ar d R ea de r

Fa il

S af e

Fa il

S ec ur e

K ey

S to ra ge

B ox

A N

S I/B

M H

A Fu nc tio n

M ag ne tic

L oc k

E le ct ric

S tri ke

R eq ue st to E xi t

E xi t B ut to n or C ra sh ba r

In te gr at ed to

Lo ck

o r

B io m et ric s

D oo r C on ta ct

S w ith

A ud ib le a nd

R em ot e

A la rm

Fo rc e or

H ol d-op en A la rm

Appendix C.3, Part B:

Security System Application Matrix

B-1

Security System Application Matrix Department of Veterans Affairs

(1) (2) (3) (4) (5)

Area of Coverage Fi xe d C am er a

P an

/T ilt

/Z oo m

C on tro lle r

V id eo M on ito r Lo ca l

R ec or di ng D ev ic e

M ot io n

D et ec tio n

G la ss B re ak

D oo r C on ta ct

C ar d R ea de r

B io m et ric s

In te rc om

D ur es s/

P an ic A la rm

E m er ge nc y

P ho ne /C al l-B ox

VASS IDS PACS DSPI

BUILDING EXTERIOR

ACCESS ROADWAYS/ VEHICLE GATES X X X X

AIR INTAKE AREAS X X X

COMMON GROUND/PATHWAYS/SIDEWALKS X X X

ELEVATOR MACHINERY ROOM X X X X X

EMERGENCY EXIT/PERIMETER DOORS X X X X

EXTERIOR WINDOWS (AC UNIT INSERTS) X X X

EXTERIOR WINDOWS (GROUND ACCESSIBLE) X X X

HAZARDOUS MATERIAL STORAGE/ENCLOSURES

MEDICAL GAS X X X X X X

LOADING DOCKS X X X X X

MAIN ENTRANCE X X X X X

PARKING LOT AREAS (EMPLOYEES) X X X X X

PARKING LOT AREAS (OPEN/VISITOR/VENDOR) X X X

PEDESTRIAN ACCESS POINT X X X

PERIMETER FENCE/WALL/BARRIER X X X

SHIPPING/RECEIVING AREA X X X X X X X

LOADING DOCK BAY AREAS X X X X X X X X

UPS BATTERY/GENERATOR AREA X X X X X X

VEHICLE ENTRANCES/SITE ACCESS (OPEN ACCESS) X X X

Footnotes:

1 Pan-Tilt-Zoom cameras shall be deployed primarily to monitor site and building exterior areas. They will supplement the use of fixed cameras if they can be programmed to monitor multiple areas with minimal human interface required.

2 A dedicated VASS monitor may be required to provide staff with the ability to monitor access to these controlled areas.

3 Refer to SDO Matrix for specific door configurations.

4 Refer to SDO Matrix for PACS configurations. The card credential will be the primary security identity for access control applications.

5 Biometric security devices shall only be used as a secondary means of identity authentication for an access control application.

6 The use of DSS equipment is indicated as an optional means to screen persons, items, and materials carried into or delivered to a facility. Each facility shall be addressed on a case-by-case basis as to DSS equipment requirements.

B-2

(1) (2) (3) (4) (5)

Area of Coverage Fi xe d C am er a

P an

/T ilt

/Z oo m

C on tro lle r

V id eo M on ito r Lo ca l

R ec or di ng D ev ic e

M ot io n

D et ec tio n

G la ss B re ak

D oo r C on ta ct

C ar d R ea de r

B io m et ric s

In te rc om

D ur es s/

P an ic A la rm

E m er ge nc y

P ho ne /C al l-B ox

VASS IDS PACS DSPI

BUILDING INTERIOR

BUILDING CORRIDORS (RESTRICTED/CONTROLLED) X X X X X X

BUILDING LOBBY/RECEPTION AREA X X X

DOMICILIARY X X X X X X X X X X

ELEVATOR EQUIPMENT ROOM X X X X X

EMERGENCY EXIT/EGRESS DOORS X X X X

GENERAL WAITING AREAS X X

HAZARDOUS MATERIAL STORAGE/ENCLOSURE

MEDICAL GAS X X X X X X

LINEN SUPPLY/STORAGE X X X X

MEDICAL DIRECTORS OFFICE X X X X X X X X

MEDICAL GAS BULK STORAGE X X X X X X

PEDESTRIAN CORRIDOR X X X X

PEDESTRIAN TUNNEL/ PATHWAYS X X X X

PEDESTRIAN SKYWALK X X X X

PHARMACY

DISPENSING ROOM X X X X X X X

INPATIENT/OUTPATIENT SERVICE WINDOWS X X X X

SECURITY SYSTEM EQUIPMENT CLOSETS X X X X X

SHIPPING/RECEIVING AREA

LOADING DOCK BAY AREAS X X X X X X X X

STAIRWELLS X X X X X X X

TELECOMMUNICATION/DATA EQUIPMENT AREAS

TELEPHONE DATA CLOSET X X X X X X

MAIN COMPUTER ROOM X X X X X X

MAIN TELEPHONE ROOM X X X X X X

UTILITY ROOMS

BATTERY-UPS-GENERATOR AREA X X X X X X

ELECTRICAL X X X X X X

MECHANICAL X X X X X X

SIGNAL X X X X X X

TELECOMMUNICATIONS X X X X X X

VA POLICE OFFICE

Footnotes:

2 A dedicated VASS monitor may be required to provide staff with the ability to monitor access to these controlled areas.

3 Refer to SDO Matrix for specific door configurations.

4 Refer to SDO Matrix for PACS configurations. The card credential will be the primary security identity for access control applications.

5 Biometric security devices shall only be used as a secondary means of identity authentication for an access control application.

Security System Application Matrix Department of Veterans Affairs

(1) (2) (3) (4) (5)

Area of Coverage Fi xe d C am er a

P an

/T ilt

/Z oo m

C on tro lle r

V id eo M on ito r Lo ca l

R ec or di ng D ev ic e

M ot io n

D et ec tio n

G la ss B re ak

D oo r C on ta ct

C ar d R ea de r

B io m et ric s

In te rc om

D ur es s/

P an ic A la rm

E m er ge nc y

P ho ne /C al l-B ox

VASS IDS PACS DSPI

Lessor: ________ Government: ________

Appendix C.3, Part C:

Interior Finishes and Doors Schedule

1= SUPPORT AREA

2= STAFF AREA

3= PATIENT AREA Finish Accent Finish Wainscotting

CORE AREA: SUPPORT

1 STORAGE, ENVIRONMENTAL MANAGEMENT SRS01 VCT RB GWB/P AT 9'-0" 11 V-F HW-5B CARD READER

CWT AREA

3 GROUP ROOMS OPMH1 RSF RB GWB/ P AT 9'-0" 11 U-F HW-3H

2 VOC REHAB CONSELOR / CTI OFA07 WSF RB VWC AT 9'-0" 11 S HW-3

MEDICAL CLINIC AREA

1 MEDICATION ROOM MEDP2 VCT RB GWB/P AT 9'-0" 3 S, CR HW-SH-3C CARD READER; OVERHEAD COUNTER SHUTTER

PATIENT CARE UNIT: PATIENT AREA

3 BATHROOM, PATIENT W/ACCESSIBLE SHOWER TLTS2 PT PT GWB(SC) CT GWB/ EPY 9'-0" 1 S HW-R3

3 BEDROOM, ONE-BED DOMICILIARY PROGRAM BRUN1 WSF RB GWB/P GWB/P 9'-0" 1 S HW-R1

3 BEDROOM, TWO BED DOMICILIARY PROGRAM BRUN1 WSF RB GWB/P GWB/P 9'-0" 1 S HW-R1

3 BEDROOM, TWO-BED DOMICILIARY PROGRAM BRUN1 WSF RB GWB/P GWB/P 9'-0" 1 S HW-R1

SCHEDULE E: ROOM FINISH, DOOR, AND HARDWARE SCHEDULE

Department/Function Area Room Code

Floor Wall

Base Finish Ceiling NotesCeiling Height Door Symbol Hardware

3= PATIENT AREA Finish Accent Finish Wainscotting

SCHEDULE E: ROOM FINISH, DOOR, AND HARDWARE SCHEDULE

Department/Function Area Room Code

Floor Wall

Base Finish Ceiling NotesCeiling Height Door Symbol Hardware

3 BEDROOM, TWO-BED DOMICILIARY PROGRAM BRUN1 WSF RB GWB/P GWB/P 9'-0" 1 S HW-R1

3 HOUSEKEEPING AIDES CLOSET (HAC) JANC1 QT QT GWB(SC) AT(SP) 9'-0" 11 U-F HW-5B

3 LAUNDRY ROOM NULR1 RSF RSF GWB/P AT 9'-0" 11 S-F HW-1A

3 LOUNGE, PATIENT, FOR ALL DAYR1 SVT RB GWB/P AT 9'-0" 11 II-F HW-12/10 2 DOORS

3 LOUNGE, PATIENT, FOR WOMEN DAYR1 SVT RB GWB/P AT 9'-0" 11 V-F HW-12/10 INTERIOR SIDELITE

3 MULTIPURPOSE ROOM / KITCHENETTE IPK01 RSF RSF GWB/P AT 9'-0" 11 S HW-1Q

3 TOILET, PUBLIC TLTU1 PT PT GWB(SC) CT GWB/ EPY 9'-0" 11 S HW-2G

3 WAITING, PATIENT CARE AREA, PUBLIC WRC01 WSF RB VWC AT 9'-0" OPEN OPEN

3 VESTIBULE - BEDROOM BRAR1 WSF RB GWB/P GWB/P 9'-0" 11 S HW-3

PATIENT CARE UNIT: SUPPORT AREA

1 COLLECTION ROOM, LINEN LCSL1 WSF WSF GWB(SC) AT(SP) 9'-0" 11 V-F, PB HW-SH-3C CARD READER

1 COLLECTION ROOM, TRASH UTC01 VCT RB GWB/P AT 9'-0" 11 V-F HW-5B CARD READER

3= PATIENT AREA Finish Accent Finish Wainscotting

SCHEDULE E: ROOM FINISH, DOOR, AND HARDWARE SCHEDULE

Department/Function Area Room Code

Floor Wall

Base Finish Ceiling NotesCeiling Height Door Symbol Hardware

2 CUBICLE, DOMICILIARY HEALTH TECHNICIAN OFA07 CPT RB GWB/P AT 9'-0" OPEN OPEN

2 CUBICLE, RN STAFF OFA07 CPT RB GWB/P AT 9'-0" 11 S HW-3

2 CUBICLE, RN STAFF OFA07 CPT RB GWB/P AT 9'-0" 1 S HW-3

1 DATA AND TELECOMMUNICATIONS ROOM COMC1 VCT RB GWB/P AT 9'-0" 11 X-F, CR HW-SH-3D CARD READER

1 LINEN ROOM, CLEAN LCCL1 WSF WSF GWB(SC) AT(SP) 9'-0" 11 U-F, PB HW-SH-3C CARD READER

1 WHEELCHAIR STORAGE SRLW1 VCT RB GWB/P AT 9'-0" 11 V-F HW-SH-3C CARD READER

1 RECYCLING AREA UTC01 VCT RB GWB/P AT 9'-0" 9 S-F, PB HW-SH-3C

1 STORAGE, GENERAL SRS01 VCT RB GWB/P AT 9'-0" 11 U-F HW-5 CARD READER

1 STORAGE, PATIENT CLOTHING AND LUGGAGE SRPB1 VCT RB GWB/P AT 9'-0" 11 U-F HW-5B CARD READER

PRRC AREA

3 GROUP ROOM OPMH1 RSF RB GWB/P AT 9'-0" 11 U-F HW-3H

2 OFFICE, STAFF (COORD, SW, PhD) OFA07 CPT RB GWB/W AT 9'-0" 11 S HW-3

RECEPTION AREA

2 CONSULTATION / ADMIT / INSPECTIONS / STEAMING OFDC2 VCT RB GWB/P AT 9'-0" 11 V-F HW-3

1 LAUNDRY ROOM, RECEPTION, (1W/1D) NULR1 RSF RSF GWB/P AT 9'-0" 11 S-F HW-1A

2 RECEPTION / ENTRY RECP1 WSF RB VWC AT 9'-0" OPEN OPEN

3 TOILET / SHOWER, PATIENT TLTS2 PT PT GWB(SC) CT GWB/EPY 9'-0" 11 S, 1 S HW-3/R3 2 DOORS

RECOVERY CLUBHOUSE AREA

3 GROUP ROOM OPMH1 RSF RB GWB/P AT 9'-0" OPEN OPEN

2 LOCAL RECOVERY COORDINATOR OFFICE / PEER OFFICE OFA07 CPT RB VWC AT 9'-0" 11 S HW-3

SHARED AREAS ON THE 1ST FLOOR

3 COMPUTER LAB, VETERAN (1 ROOM / 10 COMP) CLR03 VCT RB GWB/P AT 9'-0" 11 U-F HW-4F CARD READER

2 CONSULT ROOM CLCCR WSF RB GWB/W AT 9'-0" 11 V-F HW-3H

2 CUBICLE, KITCHEN SUPRV / DIETICIAN / JANITORIAL OFA07 CPT RB GWB/P AT 9'-0"

2 CUBICLE, POLICE OFA07 CPT RB GWB/P AT 9'-0" 11 S HW-3

1 DATA AND COMMUNICATIONS ROOM COMC1 VCT RB GWB/P AT 9'-0" 11 X-F, CR HW-SH-3D CARD READER

3 DINING AREA / MULTIPURPOSE AREA FSCD1 RSF RB GWB/P AT 9'-0" 11 S-F HW-12E 2 DOORS INTO ROOM W/ INTERIOR SIDELIGHT

1 DISHWASHING FSDW1 QT QT GWB(SC) AT(SP) 9'-0" 1 V-T HW-N1

1 EXAM / TREATMENT, GENERAL EXRG1 VCT RB GWB/P AT 9'-0" 11 S HW-3

3 GROUP THERAPY OPMH1 RSF RB GWB/P AT 9'-0" 11 U-F HW-3H

1 JANITORS CLOSET / HOUSEKEEPING AIDS JANC1 PT PT GWB(SC) CT AT(SP) 9'-0" 9 U-F HW-5B

1 DINETTE KITCHEN NCWD5 RSF RB GWB(SC) AT(SP) 9'-0" N/A N/A

2 LOCKER ROOM, STAFF LR001 VCT RB GWB/P AT 9'-0" 19 S HW-1A

3 LOCKER ROOM, VETERANS LR001 VCT RB GWB/P AT 9'-0" 19 S HW-1A

2 LOUNGE, STAFF SL001 VCT RB GWB/P AT 9'-0" 11 S HW-SH-3B CARD READER

3 NOT USED

2 OFFICE, CHIEF MHRRTP OFA09 CPT RB GWB/W AT 9'-0" 11 S HW-3

2 OFFICE, CLINICAL NURSE MGR, SUPERVISING RN OFA07 CPT RB GWB/P AT 9'-0" 11S COMBINED CUBICLES INTO ROOM

2 OFFICE, PEER SUPPORT SPECIALIST OFA07 CPT RB GWB/P AT 9'-0" N/A COMBINED CUBICLES INTO ROOM

2 OFFICE, PSA / MSA STATIONS OFA07 CPT RB GWB/P AT 9'-0" N/A COMBINED CUBICLES INTO ROOM

2 OFFICE, PSYCHIATRIST OFA07 CPT RB GWB/P AT 9'-0" N/A COMBINED CUBICLES INTO ROOM

2 OFFICE, PSYCHOLOGIST OFA07 CPT RB GWB/P AT 9'-0" N/A COMBINED CUBICLES INTO ROOM

2 OFFICE, SHARED (PMR / CHAPLAIN) OFA07 CPT RB GWB/P AT 9'-0" 11 S COMBINED CUBICLES INTO ROOM

2 OFFICE, SHARED (PMR / CHAPLAIN) OFA07 CPT RB GWB/P AT 9'-0" N/A COMBINED CUBICLES INTO ROOM

HW-3F

HW-3

1 S 3 ROOMS COMBINED

3= PATIENT AREA Finish Accent Finish Wainscotting

SCHEDULE E: ROOM FINISH, DOOR, AND HARDWARE SCHEDULE

Department/Function Area Room Code

Floor Wall

Base Finish Ceiling NotesCeiling Height Door Symbol Hardware

2 OFFICE, SHARED (PMR / CHAPLAIN) OFA07 CPT RB GWB/P AT 9'-0" N/A COMBINED CUBICLES INTO ROOM

2 OFFICE, SHARED (RESIDENTS / INTERNS) OFA07 CPT RB GWB/P AT 9'-0" 11 S COMBINED CUBICLES INTO ROOM

2 OFFICE, SHARED (RESIDENTS / INTERNS) OFA07 CPT RB GWB/P AT 9'-0" N/A COMBINED CUBICLES INTO ROOM

2 OFFICE, SOCIAL WORKER OFA07 WSF RB GWB/P AT 9'-0" 11 S/ 11 S HW-3 2 DOORS INTO ROOM

2 OFFICE, SOCIAL WORKER OFA07 WSF RB GWB/P AT 9'-0" 11 S HW-3

1 STORAGE, DRY FOOD, NON-FOOD, CLEANING SUPPLIES SRS01 VCT RB GWB/P AT 9'-0" 9 U-F/ 11 U-F HW-5

2 RECEPTION AREA / ENTRY A RECP1 WSF RB VWC AT 9'-0" N/A OPEN

1 SERVING UNIT FSSL1 QT QT GWB/P AT 9'-0" 9 V-F HW-4D 2 DOORS/ OVERHEAD COUNTER SHUTTER

1 STORAGE, REFRIGERATED GARBAGE LR001 EPY RB GWB/P EXP. 9'-0" 9 V-F HW-5

3 TOILET, VETERANS / STAFF TLTU1 PT PT GWB/P CT GWB/EPY 9'-0" 11 S HW-2G

1 VESTIBULE VES01 CP RB GWB/P GWB/P 9'-0" ALUM ENTRY DOORS E-9 2 DOORS, ACCESS CONTROL, AUTOMATIC DOOR OPENERS

1 GARDEN AREA/ PATIO XXYYC N/A N/A N/A N/A N/A 10 V-F OPEN CARD READER

VERTICAL CIRCULATION

STAIR RF RB GWB/P EXP. EXP. 10 V-F HW-6A 1 DOOR PER LEVEL AND TO EXTERIOR

ELEVATOR 1 TT TT PREFAB. PREFAB. EXP. N/A N/A

ELEVATOR 2 TT TT PREFAB. PREFAB. EXP. N/A N/A

FACILITY SUPPORT AREAS

DEMARK DATA ROOM EPY RB GWB EXP. 8 SS, M HW-12 CARD READER

ELECTRICAL CLOSET EPY RB GWB EXP. 11 S, M HW-12

ELECTRICAL CLOSET EPY RB GWB EXP. 9 V-F, M HW-12

ELECTRICAL CLOSET EPY RB GWB EXP. 11 S, M HW-12

ELECTRICAL ROOM EPY RB GWB EXP. 9 V-F, M HW-12 CARD READER

EMERGENCY ELECTRICAL ROOM EPY RB GWB EXP. 8 S-T/ DOUBLE EGRESS, M HW-12C

INFORMATION SYSTEMS DATA ROOM EPY RB GWB EXP. 8 SS, M HW-12 CARD READER

MECHANICAL ROOM EPY RB GWB EXP. 8 SS, M HW-12 CARD READER

STORAGE ROOM VCT RB GWB/P EXP. 9 V-F, M HW-12 CARD READER

WATER SERVICE ROOM EPY RB GWB EXP. 8 SS, M HW-12 CARD READER

CORRIDORS

CORRIDOR SVT RB GWB/P AT, GWB/P 8'-0" 11 II-F HW-12C CARD READER

CORRDIOR SVT RB GWB/P AT, GWB/P 8'-0" 11 S-T/ DOUBLE EGRESS HW-12C HOLD OPENS

CORRIDOR SVT RB GWB/P AT, GWB/P 8'-0" 11 S-T/ DOUBLE EGRESS HW-12C HOLD OPENS

Lessor: ________ Government: ________

Appendix C.3, Part D:

Interior Finishes and Doors Detail

Domiciliary Detroit, Michigan

INTERIOR FINISHES AND DOORS DETAIL

SECTION 1 INTERIOR FINISHES AND DOORS DETAIL APPENDIX C.3, PARTS C AND D

1.1 ROOM FINISHES, DOOR AND HARDWARE SCHEDULE

1.1.1 USE OF APPENDIX C.3, PARTS C AND D

1.1.2 OTHER REQUIREMENTS

1.1.3 WALLCOVERING PROTECTIVE (WP), RIGID PVC SHEET

1.2 DOORS

1.2.1 DOORS

1.2.2 DOOR TYPES

1.2.3 DOOR SIZES

1.2.4 LEAD LINED DOORS AND FRAMES//

1.3 FINISH HARDWARE

1.3.1 GENERAL

1.3.2 BUTT HINGES

1.3.3 CONTINUOUS HINGES

1.3.4 DOOR CLOSING DEVICES

1.3.5 DOOR STOPS

1.3.6 LOCKS AND LATCHES

1.3.7 PUSH-BUTTON COMBINATION LOCKS

1.3.8 ELECTROMAGNETIC LOCKS

1.3.9 CARD READERS

1.3.10 ELECTRIC STRIKES

1.3.11 KEYS

1.3.12 KEY CABINET

1.3.13 ARMOR PLATES, COMBINATION KICK-MOP PLATES AND DOOR

EDGING

1.3.14 EXIT DEVICES

1.3.15 WEATHERSTRIPS (FOR EXTERIOR DOORS)

1.3.16 MISCELLANEOUS HARDWARE

1.3.17 PADLOCKS FOR VARIOUS DOORS, GATES AND HATCHES

1.3.18 HARDWARE SETS

INTERIOR FINISHES AND DOORS DETAIL

SECTION 1 ROOM FINISH, DOOR AND HARDWARE SCHEDULE--GENERAL

Appendix C.3, Parts C and D lists each type of space or room required in the domiciliary and outpatient area. The following information is listed for each space in the Appendix:

Department, Area and Function

Floor, Wall and Ceiling Finishes

Door Symbol and Hardware Set

1.1 ROOM FINISHES, DOOR AND HARDWARE SCHEDULE

1.1.1 USE OF APPENDIX C.3, PARTS C AND D

THE REQUIREMENTS IN THIS SCHEDULE APPLY TO ALL SPACES TO BE

OCCUPIED BY VA IN THE OUTPATIENT CLINIC. LESSOR SHALL PROVIDE

MATERIALS, FINISHES, DOORS, FRAMES, AND HARDWARE IN ACCORDANCE

WITH THIS SCHEDULE AND THE REQUIREMENTS SPECIFIED IN THIS RLP.

Lessor shall provide each space with door(s) of the type and size as listed in Appendix C.3, Part C with hardware as noted. Doors and hardware requirements are indicated by their respective door symbols and hardware set numbers in this Schedule. Additional requirements are defined in Paragraph 1.3, "Doors and Hardware".

The Lessor shall provide room finishes in each room in accordance with Appendix C.3, Part C Finishes are shown in the schedule for the floor, base, wainscot, wall, and ceiling surfaces for each room or space. The following are abbreviations used for materials and codes throughout the room finishes, door, and hardware schedule. The Lessor shall coordinate abbreviations used in the construction documents prepared by the Lessor with the abbreviations and symbols used in this RLP.

ADO Automatic Door Operator

AF Access Flooring

AT Acoustical Ceiling (Tile)

AT(SP) Acoustical Ceiling (with Sprayed Plastic Finish)

AT(TG) Acoustical Ceiling (with Tegular Edge)

AWF Acoustical Wall Fabric (Tackable)

AWP Acoustical Wall Panel

BP Brick Pavers (Unit Pavers)

BR Brick (Unit Masonry)

C Concrete

CMU Concrete Masonry Units (Unit Masonry)

CP Carpet (without Cushion Broadloom)

CPT Carpet Tile

CT Ceramic Tile (Floor, Base, and Wall)

EFTR Existing Finish to Remain

EPY Epoxy (Coatings)

ERF Epoxy Resinous Flooring

EX Existing

EXP Exposed

GL Glass (Glazing)

GWB Gypsum Wallboard Systems

HW Hardware Set (Finish or Builders Hardware)

LM Latex Mastic Flooring

MAT Material

MC Multi-Color Coating

NF Natural Finish

NO Number

P Paint (Exterior, Interior, Transparent Finishes)

PC Precast (Architectural Precast Concrete Panels)

PCP Portland Cement Plaster

PFW Polypropylene Fabric Wallcovering

PL Plaster

PT Porcelain Tile (Floor and Base)

PUT Polyurethane

QT Quarry Tile

RAF Resilient Athletic Flooring

RB Resilient Base (Rubber or Vinyl)

RES Resinous Flooring

RF Raised Rubber Flooring

RSF Resilient Sheet Flooring

RT Rubber Tread

S Solid Surface

SC High Build Glazed Coating (Special Coating)

SD Static Dissipative

SP Special Faced

SPEC Special (Architect's Choice)

ST Stone (Cast)

SVT Solid Vinyl Tile (Luxury Vinyl Tile)

TT Terrazzo Tile (Plastic Matrix)

VCT Resilient Tile Flooring (Vinyl Composition Tile)

VP Veneer Plaster

W Wallcovering (Vinyl Coated Fabric)

WB Wall Border

WD Wood

WM Walk-Off Mat (Modular Walk Off Carpet Tiles)

WP Wallcovering Protective (Rigid PVC Sheet)

WSF Welded Seam Sheet Flooring

1.1.2 OTHER REQUIREMENTS

A. Safety Glass Utilize tempered + laminated glass at interior glazing in the domiciliary and clinic spaces where residents / veterans have access.

B. Laminated Fire Glass shall be used in fire rated assemblies Tempered Glass ("T") shall be used in all other Observations Windows and Doors with vision panels, including side lights.

C. Wall Protection at Drinking Fountains and Lavatories Provide vinyl wall covering behind Drinking Fountain Alcoves where wallboard or plaster finish occur at a minimum 50 inches wide (or terminating at the nearest inside corner). The vinyl wall covering shall go from base to ceiling.

D. Interior Side Lights Interior side lights shall be provided at all department suite entries, in all meeting rooms, group rooms, conference rooms, multi-purpose meeting rooms and cubicle suites/ shared work areas.

1.1.3 WALLCOVERING PROTECTIVE (WP), RIGID PVC SHEET

Install rigid PVC sheet wall protection at locations indicated in Appendix C.3, Part C. Provide impact-resistant GWB under wallcovering of 0.060-inch or greater thickness. Do not seam within 24 inches of internal or external corners. Install covering before installation of bases, cabinets, hardware, or items attached to or spaced slightly from wall surface. Do not install covering more than 1/4 inch below top of resilient base. Terminate top of wallcovering at handrail or 34 inches above finished floor.

1.2 DOORS

1.2.1 DOORS

The Door Symbol column in Appendix C.3, Part C identifies the type, size and special features of doors for use in a room or space. The number and letters used for the Door Symbol have the following meaning; the first number indicates door type and door material (odd nos. wood and even nos.

steel), e.g., "1, 2, 4, etc.". The first letter (or letters) indicate door size e.g. "S, UU, V, etc." The letter after a dash (e.g., "-A") indicates a modification to a door. Use these symbols and designations at door openings on floor plan drawings.

All private patient bathroom doors shall swing out or have double-acting rescue hardware.

1.2.2 DOOR TYPES

1.2.3 DOOR SIZES

1.2.4 //LEAD LINED DOORS AND FRAMES//

1.3 FINISH HARDWARE

1.3.1 GENERAL

A. Hardware Set Numbers on Schedule Except for protective plates, door stops, mutes, thresholds and the like specified herein, hardware requirements for each door are indicated in the Room Finish and Door Schedule by numbers that correspond to the following hardware sets listed in this document.

B. Keying All cylinders shall be keyed into Grand Master Key System. Provide removable core cylinders that are removable only with a special key or tool without disassembly of knob or lockset Cylinders shall be 7 pin type. Keying information shall be furnished at a later date by the Resident Engineer.

1.3.2 BUTT HINGES

A. ANSI A156.1.

The following types of butt hinges shall be used for the types of doors listed, except where otherwise specified:

(1) Exterior Doors Type A2112 for doors 900 mm (3 feet) wide or less and Type A2111 for doors over 900 mm (3 feet) wide. Hinges for exterior doors shall have non-removable pins.

(2) Interior Doors Type 8112 for doors 900 mm (3 feet) wide or less and Type A8111 for doors over 900 mm (3 feet) wide.

(3) Automatic doors hung on butts Type A2111 for exterior doors and aluminum doors, and Type A8111 for other doors.

(4) Labeled Wood Fire Doors Type 8411 or Type 8412; these hinges shall be thru bolted to door with hex nuts and bolts.

Furnish hinge sizes and quantities conforming to manufacturer's recommendations for height, width and thickness as applicable to door size, height, weight and thickness. Hinges for fire rated doors are to be furnished conforming to NFPA 80.

1.3.3 CONTINUOUS HINGES

A. General Minimum 0.120-inch- (3.0-mm-) thick, hinge leaves with minimum overall width of 4 inches (102 mm); fabricated to full height of door and frame and to template screw locations; with components finished after milling and drilling are complete:

(1) Fire Pins Steel pins to hold labeled fire doors in place if required by tested listing.

B. Continuous, Barrel-Type Hinges Hinge with knuckles formed around a pin that extends entire length of hinge.

(1) Base Metal for Exterior Hinges Stainless steel.

(2) Base Metal for Interior Hinges Stainless steel

(3) Base Metal for Hinges for Fire-Rated Assemblies Stainless steel

C. Continuous, Gear-Type Hinges Extruded-aluminum, pinless, geared hinge leaves; joined by a continuous extruded-aluminum channel cap; with concealed, self-lubricating thrust bearings.

1.3.4 DOOR CLOSING DEVICES

Closing devices shall be products of one manufacturer for each type required.

The closer shall have 50 percent adjustable closing force over minimum value for that closer and have adjustable hydraulic back check effective between 60 degrees and 85 degrees of door opening.

Where specified, closer shall have hold-open feature.

Size Requirements: Size closers in accordance with manufacturer’s recommendations or provide multi-size closers, sizes 1 through 6.

Furnish heavy duty arm stops at exterior doors or as indicated in the hardware sets.

1.3.5 DOOR STOPS

A. Conform to ANSI A156.16.

B. Provide door stops wherever an opened door or any item of hardware thereon would strike a wall, column, equipment or other parts of building construction. For concrete, masonry or quarry tile construction, use lead expansion shields for mounting door stops.

C. Where cylindrical locks with turn pieces or pushbuttons occur, equip wall bumpers Type L02251 (rubber pads having concave face) to receive turn piece or button.

D. Substitute floor stops Type L02141 or L02161 as appropriate, when wall bumpers would not provide an effective door stop.

E. Where drywall partitions occur, use floor stops, Type L02141 or L02161.

F. Provide stop Type L02011 or L02181, as applicable for exterior doors.

G. Omit stops where floor mounted door holders are required and where automatic operated doors occur.

H. Provide appropriate roller bumper for each set of doors (except where closet doors occur) where two doors would interfere with each other in swinging.

I. Provide appropriate door mounted stop on doors in individual toilets where floor or wall mounted stops cannot be used.

J. Provide overhead surface applied stop Type C02541, ANSI A156.8 on patient toilet doors in bedrooms where toilet door could come in contact with the bedroom door.

K. Provide door stops on doors where combination closer magnetic holders are specified.

1.3.6 LOCKS AND LATCHES

A. Conform to ANSI A156.2. Locks and latches for doors 45 mm (1-3/4 inch) thick or over shall have beveled fronts. Lock cylinders shall have not less than seven pins. Cylinders for all locksets shall be removable core type. Cylinders shall be furnished with construction removable cores and construction master keys. Cylinder shall be removable by special key or tool. Construct all cores so that they will be interchangeable into the core housings of all mortise locks, rim locks, cylindrical locks, and any other type locks included in the Great Grand Master Key System.

Disassembly of lever or lockset shall not be required to remove core from lockset. All locksets or latches on double doors with fire label shall have latch bolt with 19 mm (3/4 inch) throw.

Provide temporary keying device or construction core to allow opening and closing during construction and prior to the installation of final cores.

B. In addition to above requirements, locks and latches shall comply with following requirements:

1. Cylindrical Lock and Latch Sets: levers shall meet ADA (Americans with Disabilities Act) requirements. Cylindrical locksets to be certified to ANSI/BHMA A156.2 Operational Grade 1, Security Grade 1 series 4000. Where two turn pieces are specified for lock F76, turn piece on inside knob shall lock and unlock inside knob, and turn piece on outside knob shall unlock outside knob when inside knob is in the locked position. (This function is intended to allow emergency entry into these rooms without an emergency key or any special tool.)

2. Mortise Lock and Latch Sets: Certified to ANSI/BHMA A156.13. Mortise locksets shall be series 1000, Operational Grade 1 Security Grade 2. Levers to be stainless steel base material.

Locks and latchsets shall be furnished with 4 7/8" strikes conforming to ANSI A115.1 and furnished with wrought strike boxes. Furnish armored fronts for all mortise locks.

3. Auxiliary locks shall be as specified under hardware sets and conform to ANSI A156.5.

1.3.7 PUSH-BUTTON COMBINATION LOCKS

A. ANSI/BHMA A156.5, Grade 1. Mechanical or electrically operated as indicated.

B. Construction: Heavy duty cylindrical lock housing conforming to ANSI/BHMA A156.2, Grade 1. Lever handles and operating components in compliance with the UFAS and the ADA Accessibility Guidelines.

C. Special Features: Key override to permit a master keyed security system and a key activated passage feature to allow access without using the entry code.

1.3.8 ELECTROMAGNETIC LOCKS

A. ANSI/BHMA A156.23

Electrically powered, of strength and configuration indicated; with electromagnet attached to frame and armature plate attached to door. Listed under Category E in BHMA's "Certified Product Directory."

1.3.9 CARD READERS

Provide and install card readers where indicated and at all departmental suite entry doors.

Integrate card readers with other specified systems and systems that are in place.

1.3.10 ELECTRIC STRIKES

A. ANSI/ BHMA A156.31 Grade 1.

B. General: Use fail-secure electric strikes with fire-rated devices.

1.3.11 KEYS

A. Stamp all keys with change number and key set symbol. Furnish keys in quantities as follows:

Locks/Keys Quantity

Cylinder locks 2 keys each

Cylinder lock change key blanks 100 each different key way

Master-keyed sets 6 keys each

Grand Master sets 6 keys each

Control key 1 key

1.3.12 KEY CABINET

A. ANSI Standard A156.5. Provide key cabinet made of cold rolled, 1.2 mm (0.0478 inch) thick furniture steel electro-welded. Doors shall have "no sag" continuous brass-pin piano type hinge and be equipped with chrome plated locking door handles, hook cam and two parasentric keys.

All locks shall be nickel plated with solid brass pin tumbler cylinder keyed as directed. Key Cabinet and Key Control System shall accommodate all keys for this project plus 25 percent.

B. Key tags shall consist of two sets: Permanent self-locking and loan key snaphook type with tag colors as follows: Red fiber marker of the permanent self-locking type approximately 32 mm (1-1/4 inch) in diameter engraved with the legend "FILE KEY MUST NOT BE LOANED." Also furnish for each hook a white cloverleaf key marker with snap-hooks engraved with the legend

"LOAN KEY."

C. The manufacturer of the lock cylinders and locks shall attach a key tag to keys of each lock cylinder and shall mark thereon the respective item number and key change number. Provide each group of keys in a key gathering envelope (supplied by Key Cabinet Manufacturer) in which the lock manufacturer shall include the following information: Item number, key change number and door number. The contractor shall furnish the Key Cabinet Manufacturer the hardware and keying schedules and change keys.

D. The Key Cabinet Manufacturer shall set up a three-way cross index system, including master keys, listing the keys alphabetically, the hooks numerically and the key changes numerically on different colored index cards. Index cards shall be typewritten and inserted in a durable binder. Attach the keys to the two sets of numbered tags supplied with the cabinet. (The permanent tag and the loan key tag). Instruct the owner in proper use of the system. Install cabinet as directed by the Resident Engineer.

1.3.13 ARMOR PLATES, COMBINATION KICK-MOP PLATES AND DOOR EDGING

A. Conform to ANSI Standard A156.6.

B. Provide protective plates and door edging as specified below:

1. Kick-mop plates and armor plates plastic or metal, Type J100 series, color as required.

2. Provide kick-mop plates for both sides of each door, except where noted as not required.

Kick-mop plates shall be 125 mm (5 inches) high. On push side of doors where jamb stop extends to floor, make combination kick-mop plates 38 mm (1-1/2 inches) less than width of door, except pairs of metal doors which shall have plates 25 mm (1 inch) less than width of each door. Extend all other combination kick-mop plates to within 6 mm (1/4 inch) of each edge of doors. Kick mop plates shall butt astragals. For jamb stop requirements, see specification sections pertaining to door frames.

3. Kick-mop plates are not required on following door sides:

a) Armor plate side of doors;

b) Exterior side of exterior doors;

c) Closet side of closet doors;

d) Storage side of doors to or from storage spaces; and

e) Both sides of aluminum entrance doors.

4. Armor plates for doors are listed under "Hardware Sets". Armor plates shall be 875 mm (35 inches) high and 38 mm (1-1/2 inches) less than width of doors, except on pairs of metal doors.

Plates on pairs of metal doors shall be 25 mm (1 inch) less than width of each door. Where top of intermediate rail of door is less than 875 mm (35 inches) from door bottom, extend armor plates to within 13 mm (1/2 inch) of top rail. On doors equipped with panic devices, extend armor plates to within 13 mm (1/2 inch) of panic bolt cross bar.

5. Where louver or grille occurs in lower portion of doors, substitute stretcher plate and kick-mop plate in place of armor plate. Size of stretcher plate and kick-mop plate shall be 125 mm (5 inches) high.

1.3.14 EXIT DEVICES

A. Certified to ANSI Standard A156.3. Exit devices shall be Grade 1; type and function are specified in hardware sets. Provide flush with finished floor strikes for vertical rod exit devices in interior of building. Trim shall have lever handles similar to locksets, unless otherwise specified.

B. Exit devices for fire doors shall comply with Underwriters Laboratories, Inc., requirements for Fire Exit Hardware. Submit proof of compliance.

1.3.15 WEATHERSTRIPS (FOR EXTERIOR DOORS)

Conform to ANSI A156.22. Air leakage shall not to exceed 0.50 CFM per foot of crack length (0.000774m3/s/m).

1.3.16 MISCELLANEOUS HARDWARE

A. Cylinders for Various Partitions and Doors: Key cylinders same as entrance doors of area in which partitions and door occur. Provide cylinders to operate locking devices where specified for following partitions and doors:

1. Folding doors and partitions.

2. Slide-up doors.

3. Day gate on vault door.

C. Mutes: Conform to ANSI A156.16. Provide door mutes or door silencers Type L03011, of white or light gray color, on each steel door frame, except lead-lined frames and frames for sound-resistant, lightproof and electromagnetically shielded doors. Furnish 3 mutes for single doors and 2 mutes for each pair of doors, except double-acting doors. Provide 4 mutes or silencers for frames for each Dutch type door. Provide 2 mutes for each edge of sliding door which would contact door frame.

1.3.17 PADLOCKS FOR VARIOUS DOORS, GATES AND HATCHES

A. ASTM E883, size 50 mm (2 inch) wide chain; furnish extended shackles as required by job conditions. Provide padlocks, with key cylinders, for each door in following areas as noted.

B. Key padlocks as follows:

1. Chain Link Fence Gates for Electrical Substation and other Fenced Buildings or Areas:

Engineer's set, except as otherwise specified.

2. Roof Access and Scuttles: Engineer's set.

1.3.18 Soundproofing gasketing

1. Adjustable door stops at head and jambs and an automatic door bottom per set, two auto door bottoms at pairs. Both extruded aluminum, clear anodized, surface applied with sponge silicon seals between plunger and housing. Furnish door bottoms with plunger and adjustable operating rod and sponge silicon rubber gasket and stainless steel actuating spring. Doorstops mitered at corners. Furnish type and function designation as specified in the hardware sets.

1.3.18 HARDWARE SETS

Following sets of hardware correspond to hardware numbers shown in Room Finish and Door Schedule. Where hardware set for a single door is specified for a pair of doors; equip each leaf of such pair of doors with set noted. Only those hardware sets that are referenced in the

Schedule will be required. Disregard breaks in hardware set numbering sequence. Disregard hardware sets listed below but not shown in Schedule.

HW 1

Continuous Hinge Door Pull w/ Plate Push Plate Kick Plate Mop Plate (@ Inswing Door) Closer Floor Stop 3 Silencers

HW 1F

Continuous Hinge Latchset Kickplate Wall Stop 3 Silencers

HW 1L

Continuous Hinge Latchset Kick Plate Wall Stop Threshold Auto Door Bottom 2 Sets Self-Adhesive Seals

HW 1P

Floor Closer 2 Push Plates 2 Kick Plates 2 Edge Guards Overhead Stop

HW 1R

Continuous Hinge Latchset Kick Plate Closer (@ Rated Doors) Wall Stop Set Self-Adhesive Seals

HW 2C

Hinges as required Privacy Lock Kick Plate Mop Plate (@ Inswing Doors) Wall Stop 3 Silencers

HW 2G

Hinges as required Keyed Privacy Indicator Lock Closer Kick Plate Mop Plate (@ Inswing Door) Floor Stop Auto Door Bottom 2 Set Self-Adhesive Seals

HW 3B

Hinges as required Office Lock Closer Floor Stop Door Viewer (omit if door has vision lite) Set Self-Adhesive Seals

HW 3E

Hinges as required Office Lock Floor Stop Set Self-Adhesive Seals Coat Hook

HW 3G

Hinges as required Office Lock Floor Stop Coat Hook Door Viewer Threshold Auto Door Bottom 2 Sets Self-Adhesive Seals

HW 3H

Continuous Hinge Office Lock Closer Kick Plate Edge Guard Floor Stop Set Self-Adhesive Seals

HW 3J

Continuous Hinge Office Lock Kick Plate Edge Guard Floor Stop Threshold Auto Door Bottom Set Sound/ Light Seals

HW 4

Hinges as required Classroom Lock Overhead Stop 3 Silencers

HW 4B

Continuous Hinge Public Restroom Lock 2 Closer Kick Plate Mop Plate (@ Inswing Doors) Floor Stop (@ Outswing Doors) Wall Stop (@ Inswing Doors) Threshold Auto Door Bottom 2 Sets Self-Adhesive Seals

HW 4E

Hinges as required Utility Lock Closer Kick Plate Floor Stop Threshold Auto Door Bottom 2 Sets Self-Adhesive Seals

HW 4F

Continuous Hinge Utility Lock Closer Armor Plate Edge Guard Floor Stop (@ Outswing Doors) Wall Stop (@ Inswing Doors) Set Self-Adhesive Seals

HW 4G

Hinges as…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.