TJ_85_TJ-085-003_RevA_DOCKING PLANS.pdf

PDF 1 MB Posted Jul 16, 2026

Attached to: MO FY27 Thomas Jefferson Drydock REFERENCES and ATTACHMENTS Federal contract opportunity
Solicitation number: 1305M226Q0100REF
Issued by: Department of Commerce National Oceanic and Atmospheric Administration

About this file

Written by GovTribe AI · Jul 16, 2026

This document is a detailed technical docking plan and general notes for the NOAA Ship Thomas Jefferson. The document serves as a comprehensive engineering reference for the vessel's docking configuration, specifications, and operational parameters.

The docking plan includes critical dimensional data such as overall vessel length of 208 feet 2 1/4 inches, beam width of approximately 39 feet, and draft measurements ranging from 12 to 14.5 feet depending on load conditions. The plan specifies three docking positions with precise measurements for positioning accuracy. The document contains multiple technical tables defining propeller tip clearances (ranging from 0 to 6.32 inches depending on trim configuration), offsets for side blocks in eight-foot and twelve-foot increments, and displacement and hydrostatic properties for various draft conditions. The vessel's bearing capacity on shell plating is detailed for different spacing configurations (8-foot, 12-foot, and 16-foot spaced bearings), with total bearing loads specified at 33,912 to 27,452 square feet. The plan includes 28 numbered openings in the shell below the design waterline, with specifications for each penetration including size, frame location, distance from reference points, and height above keel. Additional technical sections provide drainage plug locations, block arrangement specifications, and detailed sectional views showing equipment layout, including docking positions, transducers, water scoops, reference electrodes, and various operational systems. The document references complementary details in associated drawings and includes notes on block positioning and vessel-specific operational constraints.

View the file

Other files for this federal contract opportunity

Other files attached to MO FY27 Thomas Jefferson Drydock REFERENCES and ATTACHMENTS, newest first.
File	Type	Posted
TJ_FY2027 DD_Fire System Inventorya.pdf	PDF	Jul 16, 2026
TJ_FY2027 DD_Fire System Inventory_Portables.pdf	PDF	Jul 16, 2026
NOAA Standard Specification AMC-240-1 Propulsion Shafts and Propellers.pdf	PDF	Jul 16, 2026
NOAA Standard Specification MOC-000-1G_General_Requirements for Ship Repair Work on NOAA_Ships.pdf	PDF	Jul 16, 2026
NOAA Standard Specification 000-2D Temporary-Services-Contractor-Facility.pdf	PDF	Jul 16, 2026
NOAA Standard Specification AMC-233-1A Overhaul of Diesel Engines.pdf	PDF	Jul 16, 2026
NOAA Standard Specification AMC-583-1B General Requirements for Life Raft Inspections.pdf	PDF	Jul 16, 2026
NOAA Standard Specification AMC-635-2 Thermal Insulation for Compartments.pdf	PDF	Jul 16, 2026
NOAA Standard Specification AMC-505-2_Hydrostatic Pressure Tests.pdf	PDF	Jul 16, 2026
Valeport Skin Valve Drawing.pdf	PDF	Jul 16, 2026
1701-09 - Hot Work Operations (public).docx	DOCX document	Jul 16, 2026
1901-01 - OMAO Supplement to NSBSPM (public).pdf	PDF	Jul 16, 2026
NOAA Instruction VC-06_Color and Identification of NOAA Vessels.pdf	PDF	Jul 16, 2026
SSPC-SP 18_Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance.pdf	PDF	Jul 16, 2026
0606-01 - Shipboard Lifting Appliance Certification and Inspections (public).doc	DOC document	Jul 16, 2026
1701-10 - Confined Space Entry Program (public).doc	DOC document	Jul 16, 2026
eCFR __ 46 CFR Part 160 Subpart 160.151 -- Inflatable Liferafts (SOLAS).pdf	PDF	Jul 16, 2026
VOC_SBO_FFE Checklist.pdf	PDF	Jul 16, 2026
Register of Lifting Appliances_fillable.pdf	PDF	Jul 16, 2026
Appendix I to Part 1918_ Cargo Registries and Certificates.pdf	PDF	Jul 16, 2026
ABS Marine Vessel Rules.pdf	PDF	Jul 16, 2026
Appendix I to Part 1918_ Title 29 (up to date as of 6-21-2022).pdf	PDF	Jul 16, 2026
TJ-583-02A Allied Marine Crane Manual 80-1286.pdf	PDF	Jul 16, 2026
TJ-233-01 Detroit Diesel 6V92.pdf	PDF	Jul 16, 2026
TJ-633-01_Cathodic Protection System.pdf	PDF	Jul 16, 2026
TJ-583-03A Davit Hydrographic Survey Launch (HSL).pdf	PDF	Jul 16, 2026
TJ-581-01_Anchor Windlass Operation and Maintenance Manual.pdf	PDF	Jul 16, 2026
Quincy QR-25 Series Model 350.pdf	PDF	Jul 16, 2026
TJ-651-02 Grease interceptor Gaylord Hood.pdf	PDF	Jul 16, 2026
TJ-079-02 Rev C Damage Stability_97300935_97516072.pdf	PDF	Jul 16, 2026
521-6634792E Fire Main Sys Arr and Dets.pdf	PDF	Jul 16, 2026
541-6634756D FO Transfer and Stripping Dia.pdf	PDF	Jul 16, 2026
TJ-152-002B Deck Extension Structure and Grating Replacement.pdf	PDF	Jul 16, 2026
633-6634907B_Cathodic Protection System.pdf	PDF	Jul 16, 2026
TJ-551-004 Whistle Comp Air System Arrangement and Details.pdf	PDF	Jul 16, 2026
640-6634941 Furniture Schedule.pdf	PDF	Jul 16, 2026
TJ-304-001 MCT Locations Rev1.pdf	PDF	Jul 16, 2026
321-3274004-2A HVAC Electrical Pwr Mods Incdt HVAC Mods.pdf	PDF	Jul 16, 2026
TJ-568-004D Bow Thruster Installation.pdf	PDF	Jul 16, 2026
TJ-085-002_RevJ_BOOKLET OF GENERAL PLANS.pdf	PDF	Jul 16, 2026
625-6634817E WT Door Hydraulic System Arrangement and Details.pdf	PDF	Jul 16, 2026
TJ-583-023C Davit Hydraulic Modifications.pdf	PDF	Jul 16, 2026
TJ-436-001 Fire Detection and Alarm System.pdf	PDF	Jul 16, 2026
185-001-NEW PLTF INCID SEWAGE AERATION SYSTEM_124647688.pdf	PDF	Jul 16, 2026
625-6634893J_Doors Hatches Windows and Airports.pdf	PDF	Jul 16, 2026
593-6634822F Sewage and Sanitary Sys Diagram.pdf	PDF	Jul 16, 2026
TJ-301-001_Electrical One Line Dia - redline.pdf	PDF	Jul 16, 2026
521-6634791D Fire Main System Dia.pdf	PDF	Jul 16, 2026
101-6634906 Structural standards.pdf	PDF	Jul 16, 2026
101-6634868 Structural Module 9.pdf	PDF	Jul 16, 2026

Show all 50

MO FY27 Thomas Jefferson Drydock REFERENCES and ATTACHMENTS has more files on GovTribe.

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

REV

AutoCAD SHX Text

ZONE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text A

AutoCAD SHX Text

ALL

AutoCAD SHX Text INITIAL RELEASE. THIS DRAWING IS TAKEN FROM REFERENCE 1 & SUPERCEDES PAGES 11-15 OF THAT DRAWING. THIS DRAWING INCORPORATES FINDINGS OF A SHIP CHECK BY ECS IN JAN. 2024

AutoCAD SHX Text

25APR24

AutoCAD SHX Text

SLD

AutoCAD SHX Text

REFERENCES

AutoCAD SHX Text

NO.

AutoCAD SHX Text

TITLE

AutoCAD SHX Text

REV

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

BOOKLET OF GENERAL PLANS

AutoCAD SHX Text H

AutoCAD SHX Text

TJ-085-002

AutoCAD SHX Text

DRAWING INDEX

AutoCAD SHX Text

SHT

AutoCAD SHX Text

REV

AutoCAD SHX Text

TITLE

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

GENERAL NOTES, CRITICAL DIMENSIONS & SHEET INDEX

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text DOCKING PLAN GENL NOTES, L/M, OFFSET TABLES, CRITICAL DIMS, PROP TIP CLEARANCE TABLE

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

DOCKING PLAN OFFSET TABLES, LIST OF DRAIN PLUGS, TABLE OF DISPLACEMENT

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

DOCKING PLAN LIST OF OPENINGS IN SHELL BELOW DWL, BEARING ON BLOCKS TABLE

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

DOCKING PLAN VIEW, DOCKING PLUG DETAIL, BEVELED BLOCK DETAILS

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

DOCKING PLAN OUTBOARD PROFILE, TYPICAL SECTIONS

AutoCAD SHX Text of

AutoCAD SHX Text Sheet

AutoCAD SHX Text Rev

AutoCAD SHX Text Scale

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text Size

AutoCAD SHX Text Drawing Title

AutoCAD SHX Text Drawn by

AutoCAD SHX Text Date

AutoCAD SHX Text Prepared for

AutoCAD SHX Text Date

AutoCAD SHX Text Checked by

AutoCAD SHX Text Approved by

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text Drawing Number

AutoCAD SHX Text

THIRD ANGLE PROJECTION

AutoCAD SHX Text UNLESS OTHERWISE SPECIFIED DIM ARE IN INCHES TOL ON ANGLE ± 0.01°INTERPRET DIM AND TOL PER ASME Y14.5M-2009

AutoCAD SHX Text ABS Approval

AutoCAD SHX Text Date

AutoCAD SHX Text USCG Approval

AutoCAD SHX Text

HULL NUMBER

AutoCAD SHX Text

TJ-085-003

AutoCAD SHX Text D

AutoCAD SHX Text S222

AutoCAD SHX Text

NOAA SHIP THOMAS JEFFERSON

AutoCAD SHX Text

SWBS

AutoCAD SHX Text

DOCKING PLANS

AutoCAD SHX Text

DWG:

AutoCAD SHX Text

TJ-085-003

AutoCAD SHX Text

REV:

AutoCAD SHX Text A

AutoCAD SHX Text Marine Operations, Engineering Services 2002 Marine Science Drive Newport OR 97365-5229 (541) 867 8700

AutoCAD SHX Text NOAA Office of Marine & Aviation Operations 8403 Colesville Road Silver Spring MD 20910

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

AutoCAD SHX Text jls

AutoCAD SHX Text 04/23/24

AutoCAD SHX Text

SLD

AutoCAD SHX Text 04/25/24

AutoCAD SHX Text

SLD

AutoCAD SHX Text 04/25/24

AutoCAD SHX Text

CRITICAL DIMENSIONS

AutoCAD SHX Text

LENGTH OVERALL

AutoCAD SHX Text 208'-2 1/4"

AutoCAD SHX Text

LENGTH BETWEEN PERPENDICULARS

AutoCAD SHX Text

190' (MOLDED)

AutoCAD SHX Text

BREADTH (EXTREME)

AutoCAD SHX Text 45'-0 5/8"

AutoCAD SHX Text

FRAME SPACING

AutoCAD SHX Text 24"

AutoCAD SHX Text

FROM AFT REF POINT

AutoCAD SHX Text

FIRST SIDE BLOCK IS:

AutoCAD SHX Text

NO.1 DOCKING POSITION

AutoCAD SHX Text 43'-6 3/8"

AutoCAD SHX Text 45'-6 3/8"

AutoCAD SHX Text

NO.2 DOCKING POSITION

AutoCAD SHX Text

NO.3 DOCKING POSITION

AutoCAD SHX Text 41'-6 3/8"

AutoCAD SHX Text 25'-6 3/8"

AutoCAD SHX Text 74'-0"

AutoCAD SHX Text 14'-0"

AutoCAD SHX Text

END OF SKEG

AutoCAD SHX Text

HEIGHT OF MAST ABV 14'-0" WL

AutoCAD SHX Text

DRAFT - FULL LOAD

AutoCAD SHX Text

DOCKING PLAN GENERAL NOTES

AutoCAD SHX Text

1. ARABIC NUMERALS REPRESENT NAVIGATIONAL DRAFTS AND HEIGHT ABOVE BOTTOM OF

AutoCAD SHX Text

FLAT KEEL AMIDSHIPS EXTENDED.

AutoCAD SHX Text

(A) LONGITUDINAL LOCATIONS OF ALL ITEMS ARE GIVEN FROM THE STERN REFERENCE

AutoCAD SHX Text

2. DIMENSIONS :

AutoCAD SHX Text

POINT (AFTER END OF MAIN DECK AT CENTERLINE).

AutoCAD SHX Text

(B) HEIGHTS OF ALL ITEMS ARE GIVEN FROM THE BOTTOM OF THE KEEL AMIDSHIPS EXTENDED.

AutoCAD SHX Text

HEIGHT OF SIDE BLOCKS ARE TAKEN TO THE AFTER SIDE OF BLOCKS AFT OF

AutoCAD SHX Text

AMIDSHIPS AND TO THE FORWARD SIDE OF BLOCKS FORWARD OF AMIDSHIPS.

AutoCAD SHX Text

3. COMPLETE PAINTING OF HULL :

AutoCAD SHX Text

(A) IN ORDER TO CLEAN AND PAINT THE ENTIRE BOTTOM OF THE VESSEL IN THREE

AutoCAD SHX Text

SUCCESSIVE DOCKINGS. THE FOLLOWING POSITIONS OF THE VESSEL ARE NECESSARY:

AutoCAD SHX Text

(1) POSITION NO.1

AutoCAD SHX Text

AFTER END OF MAIN DECK (POINT OF REFERENCE) IS PLACED 43'-6 3/8" AFT OF

AutoCAD SHX Text

AFTER SIDE OF NO.1 SIDE BLOCK.

AutoCAD SHX Text

AFTER SIDE OF NO.1 SIDE BLOCK.

AutoCAD SHX Text

AFTER END OF MAIN DECK (POINT OF REFERENCE) IS PLACED 45'-6 3/8" AFT OF

AutoCAD SHX Text

(2) POSITION NO.2

AutoCAD SHX Text

(3) POSITION NO.3

AutoCAD SHX Text

AFTER END OF MAIN DECK (POINT OF REFERENCE) IS PLACED 41'-6 3/8" AFT OF

AutoCAD SHX Text

AFTER SIDE OF NO.1 SIDE BLOCK.

AutoCAD SHX Text

(B) REPEAT CYCLE OF POSITIONS ASCERTAIN FROM VESSEL THE POSITION OF

AutoCAD SHX Text

VESSEL AT ITS LAST DOCKING.

AutoCAD SHX Text

4. DIMENSIONS OF OFFSET TABLES ARE GIVEN IN FEET, INCHES AND EIGHTS OF AN INCH.

AutoCAD SHX Text

5. KEEL BLOCKS SHALL BE CONFIGURED TO CLEAR DRAIN PLUGS.

AutoCAD SHX Text

6. BLOCKING :

AutoCAD SHX Text

(A) BLOCKING SHOWN ON THIS PLAN IS THAT REQUIRED FOR BLOCKING UNDER

AutoCAD SHX Text

ORDINARY UNDAMAGED CONDITIONS FOR 8'-0", 12'-0" OR 16'-0" SPACED BEARERS

AutoCAD SHX Text

IN DRYDOCK.

AutoCAD SHX Text

(1) KEEL BLOCKS SHALL BE ARRANGED IN PIERS CONSISTING OF THREE 14"x14"

AutoCAD SHX Text

(B) %%uKEEL BLOCKS%%u :

AutoCAD SHX Text

HARDWOOD TIMBERS MOUNTED WITH 2 INCH MIN THICKNESS SOFTWOOD CAP.

AutoCAD SHX Text

BLOCKS LONGITUDINAL SPACING TO BE 6'-0" CENTER TO CENTER WITH 30 INCH

AutoCAD SHX Text

CLEAR SPAN BETWEEN PIERS.

AutoCAD SHX Text

(2) NO BLOCKS OR SHORES ARE REQUIRED UNDER ORDINARY CONDITIONS OF DOCKING

AutoCAD SHX Text

UNDER THE BOW FORWARD OF FRAME 16 AND UNDER THE STERN AFT OF FRAME 81.

AutoCAD SHX Text

(3) DOCKING POSITION NO.1 OMIT BLOCKS 6, 9 16, AND 19. REMOVE FWD 12" OF BLOCK 15.

AutoCAD SHX Text

(4) DOCKING POSITION NO.2 OMIT BLOCKS 15 AND 16. REMOVE FWD 16" OF BLOCK 13.

AutoCAD SHX Text

(5) DOCKING POSITION NO.3 OMIT BLOCKS 16 AND 19.

AutoCAD SHX Text

FOR 8'-0" SPACED BEARERS (P) AND 12'-0" SPACED BEARERS (S).

AutoCAD SHX Text

(1) SIDE BLOCKS SHALL BE LOCATED (P) AND (S) UNDER LONGITUDINAL BULKHEADS

AutoCAD SHX Text

OFF CENTERLINE AS INDICATED ON TABLE OF OFFSETS IN ACCORDANCE WITH BEARER

AutoCAD SHX Text

SPACING OF DOCK, EXCEPT AS NOTED.

AutoCAD SHX Text

(2) SOFT WOOD CAPS ARE REQUIRED.

AutoCAD SHX Text

(3) DIRECTION OF BEVEL ON BLOCKS IN 18" IS GIVEN ON "TYPICAL BEVELED BLOCK"

AutoCAD SHX Text

(4) THE TABLES OF OFFSETS WILL PERMIT DOCKING FROM PLAN IN DOCKS WHICH HAVE

AutoCAD SHX Text

8'-0", 12'-0" OR 16'-0" BEARER SPACING. BLOCK SPACINGS 12'-0" OR 16'-0" ONLY ARE

AutoCAD SHX Text

REQUIRED WHEN DOCKING VESSELS OFF CENTER IN DOCKS WHICH HAVE 8'-0"

AutoCAD SHX Text

BEARER SPACING. IT IS PERMISSIBLE TO STAGGER THE BLOCKS USING ODD

AutoCAD SHX Text

ON ONE SIDE AND EVEN ON THE OTHER.

AutoCAD SHX Text

(5) SIDE BLOCKS ARE NUMBERED FROM AFT TO FORWARD WITH AFT BLOCK AS NO.1.

AutoCAD SHX Text

(6) UNIVERSAL CAP SIDE BLOCKS MAY BE USED IN LIEU OF FITTED BLOCKS.

AutoCAD SHX Text SKETCHES (ZONE 110-A & 111-A) FOR FWD & AFT BLOCKS AND IN TABLE OF OFFSETS DIMENSION "C".

AutoCAD SHX Text

(7) NO. 14 BLOCK FOR THE 8'-0" SPACED BARRIERS, AND NO. 10 BLOCK FOR THE 12'-0" SPACED

BARRIER CONTACTS CAPASTIC SHIELD FOR THE FWD ANODE ASSEMBLY ONCE THE VESSEL HAS DOCKED.

AutoCAD SHX Text Sheet

AutoCAD SHX Text Rev

AutoCAD SHX Text Scale

AutoCAD SHX Text Size

AutoCAD SHX Text Drawing Number

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

TJ-085-003

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text D

AutoCAD SHX Text Marine Operations, Engineering Services Division 2002 Marine Science Drive Newport OR 97365-5229 (541) 867 8700

AutoCAD SHX Text

PARTS LIST

AutoCAD SHX Text

ITEM

AutoCAD SHX Text

NO.

AutoCAD SHX Text

QTY.

AutoCAD SHX Text

SIZE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text

SPEC NO.

AutoCAD SHX Text

CODE

AutoCAD SHX Text

IDENT

AutoCAD SHX Text

PART NO.

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text

NO.

AutoCAD SHX Text

UNIT

AutoCAD SHX Text

WT LBS

AutoCAD SHX Text

AutoCAD SHX Text 1 1/2"

AutoCAD SHX Text

PLUG, PIPE W/SQ SOCKET

AutoCAD SHX Text

BRZ

AutoCAD SHX Text

SST

AutoCAD SHX Text

HALF COUPLING

AutoCAD SHX Text 1 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 0.32

AutoCAD SHX Text 0.75

AutoCAD SHX Text

STERN

AutoCAD SHX Text

STERN

AutoCAD SHX Text

EVEN KEEL

AutoCAD SHX Text

10 & GREATER

AutoCAD SHX Text

AutoCAD SHX Text 5.6

AutoCAD SHX Text

BOW

AutoCAD SHX Text

INCHES FROM LOW POINT

AutoCAD SHX Text

PROPELLER CLEARANCE

AutoCAD SHX Text

(INCHES)

AutoCAD SHX Text

TRIM

AutoCAD SHX Text

PROPELLER TIP CLEARANCE TABLE

AutoCAD SHX Text (-)1 7/8"

AutoCAD SHX Text (-)1 1/8"

AutoCAD SHX Text

AutoCAD SHX Text (-) 1/2"

AutoCAD SHX Text

- 0 1/8"

AutoCAD SHX Text -1 1/4"

AutoCAD SHX Text -2 3/16"

AutoCAD SHX Text -3 7/16"

AutoCAD SHX Text -4 7/8"

AutoCAD SHX Text 2-0-7+

AutoCAD SHX Text 1-3-4

AutoCAD SHX Text

AutoCAD SHX Text 1-0-5+

AutoCAD SHX Text 1-0-0+

AutoCAD SHX Text 1-1-0

AutoCAD SHX Text 1-1-2

AutoCAD SHX Text 1-6-3+

AutoCAD SHX Text 2-4-7

AutoCAD SHX Text 2-7-6+

AutoCAD SHX Text 4-7-3

AutoCAD SHX Text 9-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 10-3-0

AutoCAD SHX Text 0-11-1

AutoCAD SHX Text 0-9-6+

AutoCAD SHX Text 1-5-2+

AutoCAD SHX Text 0-10-4

AutoCAD SHX Text

AutoCAD SHX Text 0-9-6+

AutoCAD SHX Text 0-10-5+

AutoCAD SHX Text 0-10-7+

AutoCAD SHX Text 1-3-2

AutoCAD SHX Text 1-11-7+

AutoCAD SHX Text 2-1-5

AutoCAD SHX Text 4-1-0

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 6-9-0

AutoCAD SHX Text

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 13-9-0

AutoCAD SHX Text 7-9-0

AutoCAD SHX Text 147'-6 3/8"

AutoCAD SHX Text 139'-6 3/8"

AutoCAD SHX Text

OMIT

AutoCAD SHX Text 123'-6 3/8"

AutoCAD SHX Text 115'-6 3/8"

AutoCAD SHX Text 107'-6 3/8"

AutoCAD SHX Text 99'-6 3/8"

AutoCAD SHX Text 91'-6 3/8"

AutoCAD SHX Text 83'-6 3/8"

AutoCAD SHX Text 75'-6 3/8"

AutoCAD SHX Text 67'-6 3/8"

AutoCAD SHX Text 59'-6 3/8"

AutoCAD SHX Text 51'-6 3/8"

AutoCAD SHX Text 43'-6 3/8"

AutoCAD SHX Text

AutoCAD SHX Text P/S

AutoCAD SHX Text

AutoCAD SHX Text P/S

AutoCAD SHX Text

BEVEL IN

AutoCAD SHX Text

18" FOR C

AutoCAD SHX Text

POINT B

AutoCAD SHX Text

POINT A

AutoCAD SHX Text

FWD OF

AutoCAD SHX Text

REF PT

AutoCAD SHX Text

NO.

AutoCAD SHX Text

BLK

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

NO.1 DOCKING POSITION-AFTER SIDE OF NO.1 BLOCK 43'-6 3/8" FROM AFT REF POINT

AutoCAD SHX Text

INTERVALS GIVEN IN INCREMENTS OF 8'-0"

AutoCAD SHX Text

TABLE OF OFFSETS FOR SIDE BLOCKS

AutoCAD SHX Text (-) 1 1/8"

AutoCAD SHX Text 103'-6 3/8"

AutoCAD SHX Text

TABLE OF OFFSETS FOR SIDE BLOCKS

AutoCAD SHX Text

INTERVALS GIVEN IN INCREMENTS OF 12'-0"

AutoCAD SHX Text

NO.1 DOCKING POSITION-AFTER SIDE OF NO.1 BLOCK 43'-6 3/8" FROM AFT REF POINT

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

BLK

AutoCAD SHX Text

NO.

AutoCAD SHX Text

REF PT

AutoCAD SHX Text

FWD OF

AutoCAD SHX Text

POINT A

AutoCAD SHX Text

POINT B

AutoCAD SHX Text

18" FOR C

AutoCAD SHX Text

BEVEL IN

AutoCAD SHX Text

AutoCAD SHX Text P/S

AutoCAD SHX Text S

AutoCAD SHX Text P/S

AutoCAD SHX Text

AutoCAD SHX Text 43'-6 3/8"

AutoCAD SHX Text 55'-6 3/8"

AutoCAD SHX Text 67'-6 3/8"

AutoCAD SHX Text 79'-6 3/8"

AutoCAD SHX Text 91'-6 3/8"

AutoCAD SHX Text 115'-6 3/8"

AutoCAD SHX Text 127'-6 3/8"

AutoCAD SHX Text 139'-6 3/8"

AutoCAD SHX Text 151'-6 3/8"

AutoCAD SHX Text 7-9-0

AutoCAD SHX Text 13-9-0

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 6-9-0

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 4-1-0

AutoCAD SHX Text 2-7-0+

AutoCAD SHX Text 1-3-2

AutoCAD SHX Text 0-10-5+

AutoCAD SHX Text 0-9-6+

AutoCAD SHX Text 1-0-5

AutoCAD SHX Text 0-10-4

AutoCAD SHX Text 1-10-3

AutoCAD SHX Text 10-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 9-3-0

AutoCAD SHX Text 4-7-3

AutoCAD SHX Text 3-0-6

AutoCAD SHX Text 1-6-3+

AutoCAD SHX Text 1-0-0

AutoCAD SHX Text 1-0-0+

AutoCAD SHX Text 1-0-1

AutoCAD SHX Text 1-3-4

AutoCAD SHX Text 2-7-6+

AutoCAD SHX Text -4 7/8"

AutoCAD SHX Text -3 1/16"

AutoCAD SHX Text -1 5/16"

AutoCAD SHX Text

AutoCAD SHX Text (-) 1/2"

AutoCAD SHX Text (-) 2 7/16"

AutoCAD SHX Text (-) 2 3/4"

AutoCAD SHX Text (-) 7/8"

AutoCAD SHX Text

AutoCAD SHX Text -1"

AutoCAD SHX Text -2 5/8"

AutoCAD SHX Text -4 5/8"

AutoCAD SHX Text 2-11-7+

AutoCAD SHX Text 1-5-3

AutoCAD SHX Text 1-4-6

AutoCAD SHX Text 1-0-1

AutoCAD SHX Text 1-0-0+

AutoCAD SHX Text 1-1-0

AutoCAD SHX Text 1-4-5

AutoCAD SHX Text 2-8-4+

AutoCAD SHX Text 4-0-7+

AutoCAD SHX Text 9-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 10-3-0

AutoCAD SHX Text 2-1-3+

AutoCAD SHX Text 0-11-7

AutoCAD SHX Text 1-1-5

AutoCAD SHX Text 0-9-7

AutoCAD SHX Text 0-9-6

AutoCAD SHX Text 0-9-6+

AutoCAD SHX Text 0-10-5+

AutoCAD SHX Text 1-1-5+

AutoCAD SHX Text 2-3-1+

AutoCAD SHX Text 3-6-4+

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 6-9-0

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 13-9-0

AutoCAD SHX Text 7-9-0

AutoCAD SHX Text 153'-6 3/8"

AutoCAD SHX Text 141'-6 3/8"

AutoCAD SHX Text 129'-6 3/8"

AutoCAD SHX Text 117'-6 3/8"

AutoCAD SHX Text 93'-6 3/8"

AutoCAD SHX Text 81'-6 3/8"

AutoCAD SHX Text 69'-6 3/8"

AutoCAD SHX Text 57'-6 3/8"

AutoCAD SHX Text 45'-6 3/8"

AutoCAD SHX Text

AutoCAD SHX Text P/S

AutoCAD SHX Text

BEVEL IN

AutoCAD SHX Text

18" FOR C

AutoCAD SHX Text

POINT B

AutoCAD SHX Text

POINT A

AutoCAD SHX Text

FWD OF

AutoCAD SHX Text

REF PT

AutoCAD SHX Text

NO.

AutoCAD SHX Text

BLK

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

NO.2 DOCKING POSITION-AFTER SIDE OF NO.1 BLOCK 45'-6 3/8" FROM AFT REF POINT

AutoCAD SHX Text

INTERVALS GIVEN IN INCREMENTS OF 12'-0"

AutoCAD SHX Text

TABLE OF OFFSETS FOR SIDE BLOCKS

AutoCAD SHX Text 105'-6 3/8"

AutoCAD SHX Text (-)1 15/16"

AutoCAD SHX Text

TABLE OF OFFSETS FOR SIDE BLOCKS

AutoCAD SHX Text

INTERVALS GIVEN IN INCREMENTS OF 8'-0"

AutoCAD SHX Text

NO.2 DOCKING POSITION-AFTER SIDE OF NO.1 BLOCK 45'-6 3/8" FROM AFT REF POINT

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

BLK

AutoCAD SHX Text

NO.

AutoCAD SHX Text

REF PT

AutoCAD SHX Text

FWD OF

AutoCAD SHX Text

POINT A

AutoCAD SHX Text

POINT B

AutoCAD SHX Text

18" FOR C

AutoCAD SHX Text

BEVEL IN

AutoCAD SHX Text

AutoCAD SHX Text P/S

AutoCAD SHX Text S

AutoCAD SHX Text P/S

AutoCAD SHX Text

AutoCAD SHX Text P/S

AutoCAD SHX Text

AutoCAD SHX Text 45'-6 3/8"

AutoCAD SHX Text 53'-6 3/8"

AutoCAD SHX Text 61'-6 3/8"

AutoCAD SHX Text 69'-6 3/8"

AutoCAD SHX Text 77'-6 3/8"

AutoCAD SHX Text 85'-6 3/8"

AutoCAD SHX Text 93'-6 3/8"

AutoCAD SHX Text 101'-6 3/8"

AutoCAD SHX Text 109'-6 3/8"

AutoCAD SHX Text 117'-6 3/8"

AutoCAD SHX Text 125'-6 3/8"

AutoCAD SHX Text 133'-6 3/8"

AutoCAD SHX Text 141'-6 3/8"

AutoCAD SHX Text 149'-6 3/8"

AutoCAD SHX Text 7-9-0

AutoCAD SHX Text 13-9-0

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 6-9-0

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 3-6-4+

AutoCAD SHX Text 1-9-1+

AutoCAD SHX Text 1-9-2

AutoCAD SHX Text 1-1-5+

AutoCAD SHX Text 0-10-5+

AutoCAD SHX Text 0-9-6+

AutoCAD SHX Text 0-7-3+

AutoCAD SHX Text 0-11-7

AutoCAD SHX Text 1-7-5

AutoCAD SHX Text 0-9-6+

AutoCAD SHX Text 0-9-7+

AutoCAD SHX Text 0-11-6

AutoCAD SHX Text 10-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 9-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 9-3-0

AutoCAD SHX Text 4-0-7+

AutoCAD SHX Text 2-3-1

AutoCAD SHX Text 2-1-6

AutoCAD SHX Text 1-4-5

AutoCAD SHX Text 1-1-0

AutoCAD SHX Text 1-0-0+

AutoCAD SHX Text 1-0-2

AutoCAD SHX Text 1-2-4

AutoCAD SHX Text 0-11-1+

AutoCAD SHX Text 1-5-3

AutoCAD SHX Text 2-4-1

AutoCAD SHX Text -4 5/8"

AutoCAD SHX Text -3"

AutoCAD SHX Text -2"

AutoCAD SHX Text -1 1/16"

AutoCAD SHX Text

AutoCAD SHX Text (-) 9/16"

AutoCAD SHX Text (-) 5/8"

AutoCAD SHX Text (-) 1 1/4"

(-) 2 1/8"

AutoCAD SHX Text Sheet

AutoCAD SHX Text Rev

AutoCAD SHX Text Scale

AutoCAD SHX Text Size

AutoCAD SHX Text Drawing Number

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

TJ-085-003

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text D

AutoCAD SHX Text Marine Operations, Engineering Services Division 2002 Marine Science Drive Newport OR 97365-5229 (541) 867 8700

AutoCAD SHX Text

AutoCAD SHX Text (-) 1 1/16"

AutoCAD SHX Text 101'-6 3/8"

AutoCAD SHX Text

TABLE OF OFFSETS FOR SIDE BLOCKS

AutoCAD SHX Text

INTERVALS GIVEN IN INCREMENTS OF 12'-0"

AutoCAD SHX Text

NO.3 DOCKING POSITION-AFTER SIDE OF NO.1 BLOCK 41'-6 3/8" FROM AFT REF POINT

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

BLK

AutoCAD SHX Text

NO.

AutoCAD SHX Text

REF PT

AutoCAD SHX Text

FWD OF

AutoCAD SHX Text

POINT A

AutoCAD SHX Text

POINT B

AutoCAD SHX Text

18" FOR C

AutoCAD SHX Text

BEVEL IN

AutoCAD SHX Text

AutoCAD SHX Text P/S

AutoCAD SHX Text S

AutoCAD SHX Text P/S

AutoCAD SHX Text

AutoCAD SHX Text 41'-6 3/8"

AutoCAD SHX Text 53'-6 3/8"

AutoCAD SHX Text 65'-6 3/8"

AutoCAD SHX Text 77'-6 3/8"

AutoCAD SHX Text 89'-6 3/8"

AutoCAD SHX Text 113'-6 3/8"

AutoCAD SHX Text 125'-6 3/8"

AutoCAD SHX Text 137'-6 3/8"

AutoCAD SHX Text 149'-6 3/8"

AutoCAD SHX Text 7-9-0

AutoCAD SHX Text 13-9-0

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 6-9-0

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 4-7-5+

AutoCAD SHX Text 2-11-4

AutoCAD SHX Text 1-4-7+

AutoCAD SHX Text 0-10-5+

AutoCAD SHX Text 0-9-6+

AutoCAD SHX Text 0-11-6

AutoCAD SHX Text 0-9-2+

AutoCAD SHX Text 1-7-5

AutoCAD SHX Text 10-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 9-3-0

AutoCAD SHX Text 5-2-0+

AutoCAD SHX Text 3-5-4

AutoCAD SHX Text 1-8-4+

AutoCAD SHX Text 1-1-0

AutoCAD SHX Text 1-1-0+

AutoCAD SHX Text 1-2-4

AutoCAD SHX Text 1-1-6+

AutoCAD SHX Text 2-4-1

AutoCAD SHX Text -5"

AutoCAD SHX Text -3 1/2"

AutoCAD SHX Text

- 1 1/2"

AutoCAD SHX Text

AutoCAD SHX Text (-) 9/16"

AutoCAD SHX Text (-) 2 1/8"

AutoCAD SHX Text (-)1 5/8"

AutoCAD SHX Text (-)7/8"

AutoCAD SHX Text (-)7/16"

AutoCAD SHX Text (-)5/16"

AutoCAD SHX Text

AutoCAD SHX Text -9/16"

AutoCAD SHX Text -1 7/16"

AutoCAD SHX Text -2 5/8"

AutoCAD SHX Text -3 7/8"

AutoCAD SHX Text -5"

AutoCAD SHX Text 1-10-0+

AutoCAD SHX Text 1-1-6+

AutoCAD SHX Text 0-9-2

AutoCAD SHX Text 1-1-0+

AutoCAD SHX Text 1-0-0+

AutoCAD SHX Text 1-1-0

AutoCAD SHX Text 1-2-0

AutoCAD SHX Text 1-8-4+

AutoCAD SHX Text 2-8-4+

AutoCAD SHX Text 3-1-0+

AutoCAD SHX Text 5-2-0+

AutoCAD SHX Text 9-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 9-3-0

AutoCAD SHX Text 15-3-0

AutoCAD SHX Text 16-3-0

AutoCAD SHX Text 10-3-0

AutoCAD SHX Text 0-10-4+

AutoCAD SHX Text 0-9-6+

AutoCAD SHX Text 1-3-2

AutoCAD SHX Text 0-9-2+

AutoCAD SHX Text 0-6-1

AutoCAD SHX Text 0-9-6+

AutoCAD SHX Text 0-10-5+

AutoCAD SHX Text 0-11-4

AutoCAD SHX Text 1-4-7+

AutoCAD SHX Text 2-3-1+

AutoCAD SHX Text 2-6-6

AutoCAD SHX Text 4-7-5+

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 6-9-0

AutoCAD SHX Text 12-9-0

AutoCAD SHX Text 13-9-0

AutoCAD SHX Text 7-9-0

AutoCAD SHX Text 145'-6 3/8"

AutoCAD SHX Text 137'-6 3/8"

AutoCAD SHX Text 129'-6 3/8"

AutoCAD SHX Text 121'-6 3/8"

AutoCAD SHX Text 113'-6 3/8"

AutoCAD SHX Text 105'-6 3/8"

AutoCAD SHX Text 97'-6 3/8"

AutoCAD SHX Text 89'-6 3/8"

AutoCAD SHX Text 81'-6 3/8"

AutoCAD SHX Text 73'-6 3/8"

AutoCAD SHX Text 65'-6 3/8"

AutoCAD SHX Text 57'-6 3/8"

AutoCAD SHX Text 49'-6 3/8"

AutoCAD SHX Text 41'-6 3/8"

AutoCAD SHX Text

AutoCAD SHX Text P/S

AutoCAD SHX Text

AutoCAD SHX Text P/S

AutoCAD SHX Text

BEVEL IN

AutoCAD SHX Text

18" FOR C

AutoCAD SHX Text

POINT B

AutoCAD SHX Text

POINT A

AutoCAD SHX Text

FWD OF

AutoCAD SHX Text

REF PT

AutoCAD SHX Text

NO.

AutoCAD SHX Text

BLK

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

NO.3 DOCKING POSITION-AFTER SIDE OF NO.1 BLOCK 41'-6 3/8" FROM AFT REF POINT

AutoCAD SHX Text

INTERVALS GIVEN IN INCREMENTS OF 8'-0"

AutoCAD SHX Text

TABLE OF OFFSETS FOR SIDE BLOCKS

AutoCAD SHX Text 87.68

AutoCAD SHX Text 87.93

AutoCAD SHX Text 88.18

AutoCAD SHX Text 88.53

AutoCAD SHX Text 88.89

AutoCAD SHX Text 89.29

AutoCAD SHX Text 89.77

AutoCAD SHX Text 90.85

AutoCAD SHX Text 91.96

AutoCAD SHX Text 8.85

AutoCAD SHX Text 8.60

AutoCAD SHX Text 8.35

AutoCAD SHX Text 8.00

AutoCAD SHX Text 7.64

AutoCAD SHX Text 7.24

AutoCAD SHX Text 6.76

AutoCAD SHX Text 5.68

AutoCAD SHX Text 4.57

AutoCAD SHX Text 17.10

AutoCAD SHX Text 17.0

AutoCAD SHX Text 16.91

AutoCAD SHX Text 16.79

AutoCAD SHX Text 16.67

AutoCAD SHX Text 16.38

AutoCAD SHX Text 16.39

AutoCAD SHX Text 16.08

AutoCAD SHX Text 15.76

AutoCAD SHX Text 96.70

AutoCAD SHX Text 96.91

AutoCAD SHX Text 97.12

AutoCAD SHX Text 97.34

AutoCAD SHX Text 97.55

AutoCAD SHX Text 97.76

AutoCAD SHX Text 97.97

AutoCAD SHX Text 98.38

AutoCAD SHX Text 98.77

AutoCAD SHX Text 215.15

AutoCAD SHX Text 211.76

AutoCAD SHX Text 208.36

AutoCAD SHX Text 204.30

AutoCAD SHX Text 200.18

AutoCAD SHX Text 195.76

AutoCAD SHX Text 190.96

AutoCAD SHX Text 180.47

AutoCAD SHX Text 170.26

AutoCAD SHX Text 2220.18

AutoCAD SHX Text 2169.03

AutoCAD SHX Text 2118.16

AutoCAD SHX Text 2067.59

AutoCAD SHX Text 2017.34

AutoCAD SHX Text 1967.56

AutoCAD SHX Text 1918.15

AutoCAD SHX Text 1820.67

AutoCAD SHX Text 1725.15

AutoCAD SHX Text 14.50

AutoCAD SHX Text 14.25

AutoCAD SHX Text 14.0

AutoCAD SHX Text 13.75

AutoCAD SHX Text 13.50

AutoCAD SHX Text 13.25

AutoCAD SHX Text 13.0

AutoCAD SHX Text 12.5

AutoCAD SHX Text 12.0

AutoCAD SHX Text

(SEA WATER)

AutoCAD SHX Text

(FT)

AutoCAD SHX Text

(FOOT TONS)

AutoCAD SHX Text

REF. POINT

AutoCAD SHX Text

FWD OF STERN

AutoCAD SHX Text

MIDSHIPS

AutoCAD SHX Text

AFT OF

AutoCAD SHX Text

LONG CTR OF FLOATATION (FT)

AutoCAD SHX Text

IMMERSION

AutoCAD SHX Text

INCH

AutoCAD SHX Text

TONS PER

AutoCAD SHX Text

POINT

AutoCAD SHX Text

STERN REF.

AutoCAD SHX Text

C B FWD OF

AutoCAD SHX Text

ONE INCH

AutoCAD SHX Text

TO CHANGE TRIM

AutoCAD SHX Text

APPROX.MOMENT

AutoCAD SHX Text

DISPLACEMENT

AutoCAD SHX Text

(TONS)

AutoCAD SHX Text

(SEA WATER)

AutoCAD SHX Text

(FT)

AutoCAD SHX Text

DRAFT

AutoCAD SHX Text

MEAN

AutoCAD SHX Text

NO CORRECTION FOR TRIM

AutoCAD SHX Text

TABLE OF DISPLACEMENT AND OTHER PROPERTIES FOR DOCKING

AutoCAD SHX Text

ENG RM 4-55-0-F

AutoCAD SHX Text

STRG GR RM 4-87-0-F

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

VOID 4-87-1-V

AutoCAD SHX Text

AutoCAD SHX Text 9'-6"

AutoCAD SHX Text

VOID 4-87-2-V

AutoCAD SHX Text

DO TK 4-75-3-F

AutoCAD SHX Text

AutoCAD SHX Text 9'-6"

AutoCAD SHX Text 42"

AutoCAD SHX Text

DO TK 4-75-1-F

AutoCAD SHX Text

DO TK 4-75-2-F

AutoCAD SHX Text

AutoCAD SHX Text 42"

AutoCAD SHX Text 9'-6"

AutoCAD SHX Text

DO TK 4-75-4-F

AutoCAD SHX Text

BAL TK 4-59-0-W

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text 9'-6"

AutoCAD SHX Text

DO TK 4-55-1-F

AutoCAD SHX Text

SEWAGE TK 4-55-2-W

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text 9'-6"

AutoCAD SHX Text

DO TK 4-55-2-F

AutoCAD SHX Text

VOID 4-43-1-V

AutoCAD SHX Text

AutoCAD SHX Text 9'-6"

AutoCAD SHX Text 6"

AutoCAD SHX Text

SEWAGE TK 4-43-0-W

AutoCAD SHX Text

VOID 4-43-2-V

AutoCAD SHX Text

AutoCAD SHX Text 9'-6"

AutoCAD SHX Text 8'-6"

AutoCAD SHX Text

DO TK 4-34-1-F

AutoCAD SHX Text

GREY WTR TK 4-34-0-W

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text 8'-6"

AutoCAD SHX Text

DO TK 4-34-2-F

AutoCAD SHX Text

XDCR VOID 4-30-0-V

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

BAL TK 4-22-0-W

AutoCAD SHX Text

BAL TK 4-22-2-W

AutoCAD SHX Text

6" AFT

AutoCAD SHX Text

6" AFT

AutoCAD SHX Text

6" AFT

AutoCAD SHX Text

6" AFT

AutoCAD SHX Text

6" AFT

AutoCAD SHX Text

6" AFT

AutoCAD SHX Text

6" AFT

AutoCAD SHX Text

6" AFT

AutoCAD SHX Text

6" AFT

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

8 3/4" AFT

AutoCAD SHX Text

6" AFT

AutoCAD SHX Text

8 3/4" AFT

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

10" FWD

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text P

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text

AutoCAD SHX Text 7"

AutoCAD SHX Text

BAL TK 4-22-1-W

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

AutoCAD SHX Text 8'-6"

AutoCAD SHX Text 6"

AutoCAD SHX Text

10" AFT

AutoCAD SHX Text P

AutoCAD SHX Text

GREY WTR TK 4-28-0-W

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

DO TK 4-16-1-F

AutoCAD SHX Text 8'-6"

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

AutoCAD SHX Text 7"

AutoCAD SHX Text

DO TK 4-16-2-F

AutoCAD SHX Text

BAL TK 4-8-1-W

AutoCAD SHX Text 6"

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

BAL TK 4-8-2-W

AutoCAD SHX Text S

AutoCAD SHX Text

FP BAL 4-0-0-W

AutoCAD SHX Text 4"

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text

TANK NAME

AutoCAD SHX Text

DIST OFF CL SHIP

AutoCAD SHX Text

FRAME

AutoCAD SHX Text

FWD OR AFT

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

NO.

AutoCAD SHX Text

LIST OF DRAIN PLUGS (IN SHELL)

AutoCAD SHX Text

BILGE HOLDING TK 4-57-1-W

SLUDGE TK 4-57-2-W

AutoCAD SHX Text Sheet

AutoCAD SHX Text Rev

AutoCAD SHX Text Scale

AutoCAD SHX Text Size

AutoCAD SHX Text Drawing Number

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

TJ-085-003

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text D

AutoCAD SHX Text Marine Operations, Engineering Services Division 2002 Marine Science Drive Newport OR 97365-5229 (541) 867 8700

AutoCAD SHX Text

AutoCAD SHX Text 1'-2 3/16"

AutoCAD SHX Text (2 1/2")

AutoCAD SHX Text 4'-2 1/4"

AutoCAD SHX Text 6'-6"

AutoCAD SHX Text 8'-2 1/2"

AutoCAD SHX Text 3'-7 3/4"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 14'-0"

AutoCAD SHX Text 16'-8 1/2"

AutoCAD SHX Text 18"

AutoCAD SHX Text 6'-0"

AutoCAD SHX Text 14'-0"

AutoCAD SHX Text 16'-8 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 13'-4"

AutoCAD SHX Text 9'-0"

AutoCAD SHX Text 12"

AutoCAD SHX Text 36.53

AutoCAD SHX Text 28.53

AutoCAD SHX Text 48.53

AutoCAD SHX Text 35.53

AutoCAD SHX Text 82.53

AutoCAD SHX Text 150.64

AutoCAD SHX Text 124.53

AutoCAD SHX Text 184.03

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

12" AFT

AutoCAD SHX Text

12" AFT

AutoCAD SHX Text

12" AFT

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text P

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text

2"DIA

AutoCAD SHX Text

10"DIA

AutoCAD SHX Text 24" x 24"

AutoCAD SHX Text

3 1/16" DIA

AutoCAD SHX Text

3 1/16" DIA

AutoCAD SHX Text

3 1/16" DIA

AutoCAD SHX Text

3 1/16" DIA

AutoCAD SHX Text

3 1/16" DIA

AutoCAD SHX Text

3 1/16" DIA

AutoCAD SHX Text

9 3/4" DIA

AutoCAD SHX Text

10 13/16" DIA

AutoCAD SHX Text

10 13/16" DIA

AutoCAD SHX Text

WATER SCOOP

AutoCAD SHX Text

SEACHEST

AutoCAD SHX Text

SEACHEST

AutoCAD SHX Text

SEACHEST

AutoCAD SHX Text

REFERENCE ELECTRODE

AutoCAD SHX Text

REFERENCE ELECTRODE

AutoCAD SHX Text

ANODE ASSEMBLY

AutoCAD SHX Text

DOPPLER SPEED LOG

AutoCAD SHX Text

SONAR TRANSDUCER

AutoCAD SHX Text

SONAR TRANSDUCER

AutoCAD SHX Text

HEIGHT ABV

AutoCAD SHX Text

KEEL BOTTOM

AutoCAD SHX Text

DISTANCE OFF

AutoCAD SHX Text

CL SHIP

AutoCAD SHX Text

REF POINT

AutoCAD SHX Text

FWD OF AFT

AutoCAD SHX Text

FRAME

AutoCAD SHX Text

AFT

AutoCAD SHX Text

FWD OR

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

PENETRATI0N

AutoCAD SHX Text

SIZE OF

AutoCAD SHX Text

SERVICE

AutoCAD SHX Text

NO.

AutoCAD SHX Text

ITEM

AutoCAD SHX Text

LIST OF OPENINGS IN SHELL BELOW DWL

AutoCAD SHX Text

2118 LT OR 4,744,320 LB

AutoCAD SHX Text 24 INCH WIDTH OF SHOE, AND 1 BLOCK WITH 1/2 INCH WIDTH OF SHOE). FULL LOAD DISPLACEMENT

AutoCAD SHX Text 1 BLOCK WITH 36 INCH WIDTH OF SHOE, 1 BLOCK WITH 50 INCH WIDTH OF SHOE. 5 BLOCKS WITH

AutoCAD SHX Text KEEL BLOCK BEARING AREA BASED ON POSITION 3 (6 BLOCKS WITH 48 INCH WIDTH OF SHOE, AutoCAD SHX Text

11.12 TONS

AutoCAD SHX Text

9.94 TONS

AutoCAD SHX Text

8.99 TONS

AutoCAD SHX Text

139.9 LB

AutoCAD SHX Text

154.7 LB

AutoCAD SHX Text

172.9 LB

AutoCAD SHX Text

7020 SQ. IN.

AutoCAD SHX Text

48.75 SQ. FT

AutoCAD SHX Text

141.75 SQ. FT

AutoCAD SHX Text

20,412 SQ. IN.

AutoCAD SHX Text

27,432 SQ. IN.

AutoCAD SHX Text

190.5 SQ. FT

AutoCAD SHX Text

213.0 SQ. FT

AutoCAD SHX Text

30,672 SQ. IN.

AutoCAD SHX Text

20,412 SQ. IN.

AutoCAD SHX Text

141.75 SQ. FT

AutoCAD SHX Text

71.25 SQ. FT

AutoCAD SHX Text

10,260 SQ. IN.

AutoCAD SHX Text

33,912 SQ. IN

AutoCAD SHX Text

235.5 SQ. FT

AutoCAD SHX Text

141.75 SQ. FT

AutoCAD SHX Text

20,412 SQ. IN.

AutoCAD SHX Text

13,500 SQ. IN.

AutoCAD SHX Text

93.75 SQ. FT

AutoCAD SHX Text

BEARING PER

AutoCAD SHX Text

SQ. FT. BLOCKING

AutoCAD SHX Text

SQ. IN. BLOCKING

AutoCAD SHX Text

BEARING PER

AutoCAD SHX Text

TOTAL BEARING

AutoCAD SHX Text KEEL BLOCKS 52" x 42"

AutoCAD SHX Text

(18 EA)

AutoCAD SHX Text

(TOTAL P & S)

AutoCAD SHX Text SIDE BLOCKS 18" x 36"

AutoCAD SHX Text

SUPPORT

AutoCAD SHX Text

16'-0" SPACED BEARERS

AutoCAD SHX Text

12'-0" SPACED BEARERS

AutoCAD SHX Text

8'-0" SPACED BEARERS

AutoCAD SHX Text

BEARING ON SHELL PLATING

AutoCAD SHX Text

BEARING ON BLOCKS TABLE

AutoCAD SHX Text

BIOLITE SEA CHEST

AutoCAD SHX Text

BBADCP TRANSDUCER

AutoCAD SHX Text

SCIENTIFC SEA CHEST

AutoCAD SHX Text

SSSVS (#2) INLET

AutoCAD SHX Text

1 1/2" DIA

AutoCAD SHX Text

4" DIA

AutoCAD SHX Text 15" x 6"

AutoCAD SHX Text

9" DIA

AutoCAD SHX Text S

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text S

AutoCAD SHX Text

6" FWD

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

AutoCAD SHX Text 128.53

AutoCAD SHX Text

AutoCAD SHX Text 124.53

AutoCAD SHX Text 126.53

AutoCAD SHX Text

3.5 KHZ TRANSDUCER

AutoCAD SHX Text

48" DIA

AutoCAD SHX Text S

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

AutoCAD SHX Text 128.53

AutoCAD SHX Text 7'-2"

AutoCAD SHX Text (2 1/2")

AutoCAD SHX Text 10'-11 7/8"

AutoCAD SHX Text 9 1/2"

AutoCAD SHX Text

%%UNOTE:

AutoCAD SHX Text

EM 2040/EM712 XDCR GONDOLA

AutoCAD SHX Text

2" DIA

AutoCAD SHX Text

9" FWD

AutoCAD SHX Text

AutoCAD SHX Text 133.71

AutoCAD SHX Text

AutoCAD SHX Text (18")

AutoCAD SHX Text

38 KHZ 12 KHZ 200KHZ TRANSDUCERS

AutoCAD SHX Text

2" DIA

AutoCAD SHX Text P

AutoCAD SHX Text

12" AFT

AutoCAD SHX Text

AutoCAD SHX Text 126.55

AutoCAD SHX Text 6'-2 7/8"

AutoCAD SHX Text (12")

AutoCAD SHX Text

KNUDSEN 12 KHZ SOUND XDCR

AutoCAD SHX Text

2" DIA

AutoCAD SHX Text P

AutoCAD SHX Text

12" AFT

AutoCAD SHX Text

AutoCAD SHX Text 126.69

AutoCAD SHX Text 12"

AutoCAD SHX Text

AutoCAD SHX Text 19'-1"

AutoCAD SHX Text

SSSVS (#1) INLET

AutoCAD SHX Text

1 1/2" DIA

AutoCAD SHX Text S

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

AutoCAD SHX Text 126.53

AutoCAD SHX Text

AutoCAD SHX Text 12"

AutoCAD SHX Text 15'-8 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 18'-2 5/8"

AutoCAD SHX Text

ANODE ASSEMBLY

AutoCAD SHX Text

ANODE ASSEMBLY

AutoCAD SHX Text

ANODE ASSEMBLY

AutoCAD SHX Text 24" x 24"

AutoCAD SHX Text

DYNAMIC DRAFT BUBBLE GAGE

AutoCAD SHX Text

2" DIA

AutoCAD SHX Text S

AutoCAD SHX Text

12" FWD

AutoCAD SHX Text

AutoCAD SHX Text 124.53

AutoCAD SHX Text 0'-12"

AutoCAD SHX Text

AutoCAD SHX Text 5"

AutoCAD SHX Text 7'-7"

AutoCAD SHX Text 130.20

AutoCAD SHX Text

13" AFT

AutoCAD SHX Text P

AutoCAD SHX Text

9 7/8" SQ

AutoCAD SHX Text

KNUDSEN 12 KHZ SOUND XDCR

AutoCAD SHX Text

AutoCAD SHX Text 5"

AutoCAD SHX Text 7'-7"

AutoCAD SHX Text 130.20

AutoCAD SHX Text

13" AFT

AutoCAD SHX Text S

AutoCAD SHX Text

9 7/8" SQ

AutoCAD SHX Text

ODOM 24/200 SOUND XDCR

AutoCAD SHX Text

AutoCAD SHX Text 0"

AutoCAD SHX Text 2'-6 1/2"

AutoCAD SHX Text 117.00

AutoCAD SHX Text

7" AFT

AutoCAD SHX Text S

AutoCAD SHX Text

4" DIA

AutoCAD SHX Text

VALEPORT SOUND VEL SENS

AutoCAD SHX Text

AutoCAD SHX Text 0"

AutoCAD SHX Text 12"

AutoCAD SHX Text 115.00

AutoCAD SHX Text

7" AFT

AutoCAD SHX Text P

AutoCAD SHX Text

10" DIA

AutoCAD SHX Text

PIPE CONDUIT

AutoCAD SHX Text

AutoCAD SHX Text (11")

AutoCAD SHX Text 52"

AutoCAD SHX Text 132.46

AutoCAD SHX Text

11.125" FWD

AutoCAD SHX Text S

AutoCAD SHX Text

18" DIA

ADCP

AutoCAD SHX Text

BOW THRUSTER

AutoCAD SHX Text of

AutoCAD SHX Text Sheet

AutoCAD SHX Text Rev

AutoCAD SHX Text Scale

AutoCAD SHX Text Size

AutoCAD SHX Text Drawing Number

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

TJ-085-003

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text D

AutoCAD SHX Text Marine Operations, Engineering Services Division 2002 Marine Science Drive Newport OR 97365-5229 (541) 867 8700

AutoCAD SHX Text

CHAIN LKR DRAIN

AutoCAD SHX Text

OVERBD DISCHARGE

AutoCAD SHX Text

(TYPICAL FORE & AFT)

AutoCAD SHX Text

%%UNOTE: DO NOT BLOCK IN THIS AREA

AutoCAD SHX Text

DIELECTRIC CAPASTIC AREA (P&S)

AutoCAD SHX Text

NO.22

AutoCAD SHX Text

OMIT STBD ONLY

AutoCAD SHX Text

FAIRING

AutoCAD SHX Text

NO.14

AutoCAD SHX Text

NO.12

AutoCAD SHX Text

NO.13

AutoCAD SHX Text

NO.10

AutoCAD SHX Text

NO.9

AutoCAD SHX Text

NO.21

AutoCAD SHX Text

NO.20

AutoCAD SHX Text

KEEL BLOCKS IN POSITIONS N0. 2 & 3 NOT SHOWN FOR CLARITY

AutoCAD SHX Text

INTERVALS OF SIDE BLOCKING SHOWS 8'=0" ON PORT SIDE, 12'-0" ON STBD SIDE

AutoCAD SHX Text

%%UPLAN VIEW 108-B

AutoCAD SHX Text 47 1/2

AutoCAD SHX Text

OMIT PORT ONLY

AutoCAD SHX Text

OMIT POSN NO.1

AutoCAD SHX Text

OMIT POSN NO.1

AutoCAD SHX Text

NO.15

AutoCAD SHX Text

NO.14

AutoCAD SHX Text

NO.13

AutoCAD SHX Text

NO.12

AutoCAD SHX Text

NO.8

AutoCAD SHX Text

NO.7

AutoCAD SHX Text

NO.6

AutoCAD SHX Text

NO.5

AutoCAD SHX Text

NO.4

AutoCAD SHX Text

NO.3

AutoCAD SHX Text

NO.2

AutoCAD SHX Text

NO.1

AutoCAD SHX Text

NO.1

AutoCAD SHX Text

NO.2

AutoCAD SHX Text

NO.3

AutoCAD SHX Text

NO.4

AutoCAD SHX Text

NO.5

AutoCAD SHX Text

NO.6

AutoCAD SHX Text

NO.7

AutoCAD SHX Text

NO.10

AutoCAD SHX Text

NO.11

AutoCAD SHX Text

NO.11

AutoCAD SHX Text

NO.10

AutoCAD SHX Text

NO.9

AutoCAD SHX Text

NO.8

AutoCAD SHX Text

NO.7

AutoCAD SHX Text

NO.6

AutoCAD SHX Text

NO.5

AutoCAD SHX Text

NO.4

AutoCAD SHX Text

NO.3

AutoCAD SHX Text

NO.2

AutoCAD SHX Text

NO.1

AutoCAD SHX Text

DIELECTRIC SHIELD AREA (P&S)

AutoCAD SHX Text

SIDE BLOCKS NO.2 DOCKING POSITION

AutoCAD SHX Text

(POINT OF REFERENCE)

AutoCAD SHX Text

AFTER END OF MAIN DK

AutoCAD SHX Text

SIDE BLOCKS NO.1 DOCKING POSITION

AutoCAD SHX Text

SIDE BLOCKS NO.3 DOCKING POSITION

AutoCAD SHX Text

NO.3 DOCKING POSITION 27'-6 3/8"

AutoCAD SHX Text

NO.2 DOCKING POSITION 31'-6 3/8"

AutoCAD SHX Text

NO.1 DOCKING POSITION 29'-6 3/8"

AutoCAD SHX Text

SURVEY BENCHMARK

AutoCAD SHX Text

DOCKING PLUG (TYP) SEE DRAIN PLUG LIST ZONE 93-D AND DETAIL 108-A

AutoCAD SHX Text

SEE G.N. #6

AutoCAD SHX Text

FWD

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text

NOTE:

AutoCAD SHX Text

ITEM NUMBERS REFER TO

AutoCAD SHX Text

LIST OF OPENINGS IN SHELL

AutoCAD SHX Text

BELOW DWL TABLE, ZONE 98-D.

AutoCAD SHX Text

SSSVS (#2) INLET

AutoCAD SHX Text

ANODE ASSY

AutoCAD SHX Text

DOPPLER SPEED LOG

AutoCAD SHX Text

EM 2040 / EM712 XDCR GONDOLA

AutoCAD SHX Text

SURVEY BENCHMARK

AutoCAD SHX Text

AutoCAD SHX Text 200KHz,12KHz,38KHz XDCR (FWD-AFT)

AutoCAD SHX Text

%%UDETAIL 108-A

AutoCAD SHX Text

THAT IT IS INSTALLED IN.

AutoCAD SHX Text

THE NUMBER OF THE TANK

AutoCAD SHX Text

IS TO BE PUNCH MARKED WITH

AutoCAD SHX Text

EACH DOCKING PLUG (PC 1)

AutoCAD SHX Text

NOTE:

AutoCAD SHX Text

MOLD LINE

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text 1/8

AutoCAD SHX Text

SHELL

AutoCAD SHX Text

DOCKING PLUG SCALE: NONE

AutoCAD SHX Text

ITEM NUMBERS REFER TO

AutoCAD SHX Text

PARTS LIST, ZONE 82-D.

AutoCAD SHX Text %%uTYPICAL BEVELED BLOCK

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

AFT BLOCK

AutoCAD SHX Text %%uTYPICAL BEVELED BLOCK

AutoCAD SHX Text

FWD BLOCK

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

FWD

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

BOTTOM OF KEEL

AutoCAD SHX Text

FWD

AutoCAD SHX Text

HALF BREADTH GIVEN IN

AutoCAD SHX Text

TABLE OF OFFSETS

AutoCAD SHX Text

HALF BREADTH GIVEN IN

AutoCAD SHX Text

TABLE OF OFFSETS

AutoCAD SHX Text

TABLE OF OFFSETS

AutoCAD SHX Text

HALF BREADTH GIVEN IN

AutoCAD SHX Text

BOTTOM OF KEEL

AutoCAD SHX Text

POINT

AutoCAD SHX Text B

AutoCAD SHX Text

POINT

AutoCAD SHX Text A

AutoCAD SHX Text

HALF BREADTH GIVEN IN

AutoCAD SHX Text

TABLE OF OFFSETS

AutoCAD SHX Text

POINT

AutoCAD SHX Text B

AutoCAD SHX Text

POINT

AutoCAD SHX Text A

AutoCAD SHX Text

ODOM 24/200 KHZ

AutoCAD SHX Text

REFERENCE ELECTRODE

AutoCAD SHX Text

REFERENCE ELECTRODE

AutoCAD SHX Text

ANODE ASSY

AutoCAD SHX Text

SEA CHEST

AutoCAD SHX Text

SEA CHEST

AutoCAD SHX Text

SEA CHEST

AutoCAD SHX Text

WATER SCOOP (ON SKEG)

AutoCAD SHX Text

ANODE ASSY

AutoCAD SHX Text

ANODE ASSY

AutoCAD SHX Text

3.5 KHz TRANSDUCER

AutoCAD SHX Text

1 1 2" PIPE PLUG W/SQ SOCKET

AutoCAD SHX Text

1 1/2" HALF COUPLING

AutoCAD SHX Text

DYNAMIC DRAFT BUBBLE GAGE

AutoCAD SHX Text

KNUDSEN 24/200 KHZ

AutoCAD SHX Text

SSSVS (#1) INLET

AutoCAD SHX Text

SCALE: 1/8"=1'-0"

AutoCAD SHX Text

VALEPORT SOUND VEL SENS

AutoCAD SHX Text

2040TX

AutoCAD SHX Text

2040RX

AutoCAD SHX Text

712RX

AutoCAD SHX Text

712TX

AutoCAD SHX Text

DRAFT BUBBLER

AutoCAD SHX Text

50 KHZ

AutoCAD SHX Text

PRIMARY INTAKE

AutoCAD SHX Text

200 KHZ

AutoCAD SHX Text

%%UDETAIL 106-A

AutoCAD SHX Text

GONDOLA EQUIP LAYOUT SCALE: NONE

AutoCAD SHX Text

CONDUIT

AutoCAD SHX Text

ADCP

FAIRING

AutoCAD SHX Text Sheet

AutoCAD SHX Text Rev

AutoCAD SHX Text Scale

AutoCAD SHX Text Size

AutoCAD SHX Text Drawing Number

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

TJ-085-003

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text D

AutoCAD SHX Text Marine Operations, Engineering Services Division 2002 Marine Science Drive Newport OR 97365-5229 (541) 867 8700

AutoCAD SHX Text

%%UOUTBOARD PROFILE 117-A

AutoCAD SHX Text

LENGTH BETWEEN PERPENDICULARS = 190'-0" (MOLDED)

AutoCAD SHX Text

LENGTH OVERALL = 208'-2 1/4"

AutoCAD SHX Text

DOUBLE BITT (P&S)

AutoCAD SHX Text

PANAMA CHOCK (P&S)

AutoCAD SHX Text

01 DK

AutoCAD SHX Text

MAIN DK

AutoCAD SHX Text

DWL 14'-0" ABL

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

OT BHD FR 22

AutoCAD SHX Text

WTRTT BHD FR 8

AutoCAD SHX Text

OT BHD FR 16

AutoCAD SHX Text

LOWER CHINE

AutoCAD SHX Text

UPPER CHINE

AutoCAD SHX Text

WTRTT BHD FR 30

AutoCAD SHX Text

OT BHD FR 34

AutoCAD SHX Text 47 1/2

AutoCAD SHX Text

WTRTT & OT BHD FR 43

AutoCAD SHX Text

WTRTT BHD FR 51

AutoCAD SHX Text

WTRTT BHD FR 55

AutoCAD SHX Text

AUX SW OVBD DISCH (S)

AutoCAD SHX Text

AUX SW OVBD DISCH (P&S)

AutoCAD SHX Text

BILGE & BALLAST OVBD DISCH (P)

AutoCAD SHX Text

OILY WASTE DISCH (P)

AutoCAD SHX Text

DSL ENG COOLING DISCH (P)

AutoCAD SHX Text

OT BHD FR 87

AutoCAD SHX Text

DRAIN (P)

AutoCAD SHX Text

SEA CHEST (P)

AutoCAD SHX Text

FILL (P)

AutoCAD SHX Text

RUDDER REMOVAL

AutoCAD SHX Text

REQUIRED FOR

AutoCAD SHX Text

CLEARANCE

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text

OT BHD FR 75

AutoCAD SHX Text

STERN TUBE BEARING ACCESS COVER (P)

AutoCAD SHX Text

CL OF SHAFT

AutoCAD SHX Text

PANAMA CHOCK (P/S)

AutoCAD SHX Text

DOUBLE BITT (P/S)

AutoCAD SHX Text

DECK DRAIN & WET LAB SINK OVBD DISCH (P)

AutoCAD SHX Text

ANODE (P/S)

AutoCAD SHX Text

28'-0" CLEARANCE REQUIRED FOR SHAFT REMOVAL

AutoCAD SHX Text

AFTER END OF MAIN DK (POINT OF REFERENCE)

AutoCAD SHX Text

SEW & SAN OVBD DISCH

AutoCAD SHX Text

DSL ENG COOLING DISCH (P)

AutoCAD SHX Text

WATER MAKER OVBD DISCH

AutoCAD SHX Text

FOR BLOCK POSN SEE PLAN VIEW 108-B

AutoCAD SHX Text

PROPELLER TIP CLEARANCE SEE TABLE ZONE 87-D

AutoCAD SHX Text

COMBINED OVBD DISCHARGE

AutoCAD SHX Text

SEA CHEST (S)

AutoCAD SHX Text

REFERENCE ELECTRODE (S)

AutoCAD SHX Text

REFERENCE ELECTRODE (P)

AutoCAD SHX Text

ANODE ASSY (S)

AutoCAD SHX Text

ANODE ASSY (P)

AutoCAD SHX Text

FWD

AutoCAD SHX Text

3.5 KHz TRANSDUCER

AutoCAD SHX Text

SSSVS…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jul 16, 2026.