Test Inspection Report.pdf

This is a Data Item Description (DID) template for Test/Inspection Reports, identified as DI-NDTI-80809B, approved by the Office of Primary Responsibility (F/AFMC-DOP) on January 24, 1997. The DID establishes standardized format and content requirements for documenting test and inspection results, findings, and analyses used by government agencies to evaluate compliance with system requirements, performance objectives, specifications, and test/inspection plans. This DID is applicable to engineering (developmental), preliminary qualification, qualification, and acceptance testing, and supersedes earlier versions DI-NDTI-80809A and DI-MISC-80653.

The report template requires specific sections including: cover and title page information (report date, number, contractor identification, contract details, test type, item identification, and security classification); table of contents; introduction (test/inspection objectives, item identification, and requirements correlation); summary of significant results and proposed corrective actions; reference documents; body sections covering test equipment identification, facility installation and setup, procedures, recorded data, test/inspection results with matrices comparing achievement against objectives, conclusions distinguishing objective from subjective findings, and recommendations regarding item acceptability, additional testing, redesign, problem resolution, and documentation changes; three levels of authentication certifications signed by contractor personnel and government witnesses; and appendices for voluminous data, drawings, and photographs. Contractor format is acceptable provided all required information is organized to facilitate presentation and understanding. The AMSC number is F7231, and the form is approved under OMB No. 0704-0188.