FA Qualification Test Plan and Procedures.pdf
PDF 20 KB Posted
- Solicitation number
- SPRTA126R0402
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Data Item Description (DID) that serves as a template for contractors to prepare a First Article Qualification Test Plan and Procedures document. The DID is identified as DI-NDTI-81307A, approved on 21 November 2006, and supersedes the previous version DI-NDTI-81307. It is maintained by the Office of Primary Responsibility (NS/I522) and carries AMSC Number 7649.
The DID establishes the required format and content for a test plan that contractors must develop to demonstrate first article qualification. The plan shall be prepared in the contractor's own format and must include: the purpose of the test; applicable documents; description of units to be tested; detailed test descriptions containing step-by-step operator procedures, readings to be taken, equipment settings, and test equipment identification; drawings, schematics, and photographs of any noncommercial fixtures and testers; and inspection criteria defining minimum performance requirements for Government acceptance. The inspection criteria must address worst-case prime power input, worst-case signal level and timing inputs, and signal level and timing outputs. This document does not reference external reference documents and contains no applicable forms requirement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA_REPORT.pdf | ||
| Qualification Requirment.pdf | ||
| Test Inspection Report.pdf | ||
| Transportation-1653.pdf | ||
| CDRL1_REPORT.pdf | ||
| IUID Checklist.pdf | ||
| SPRTA1-26-R-0402.pdf | ||
| FA Test Plans and Reports.pdf | ||
| Packaging-158.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .