Spec Sheet Cuts MK Final 091323.pdf

Project:

DM&A VA Hospital ‐ Brockton R2 FinalRI R1

From:

Singer Equipment Co ‐ Bellmawr Michael Day 180 Heller Place Bellmawr, NJ 08031 856‐559‐4290 800‐443‐2212 384 (Contact)

To:

09/13/2023

09/13/2023Submittal Sheet

ITEM# 1 ‐ HOTPLATE, COUNTERTOP, GAS (1 EA REQ'D)

Star 806HA Ultra‐Max® Hotplate, countertop, gas, 36" wide, (6) 30,000 BTU cast iron burners, manual controls, heavy duty cast iron grates, drip tray, heavy duty chrome knobs, stainless steel exterior with cool touch bullnose, 4" adjustable legs, 180,000 BTU, cULus, UL EPH Classified, Made in USA

ACCESSORIES

Mfr Qty Model Spec

Star 1 Natural gas (Specify elevation over 2000 ft)

GAS STEAM

SIZE MBTU KW INLET SIZE RETURN SIZE LB/HR PSIG (min) PSIG (max)

1 3/4" 180 1

Star 806HA Item #1

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 1

DESCRIPTION

SPECIFICATIONS

WARRANTY

FEATURES

CERTIFICATIONS

OPTIONS & ACCESSORIES

Ultra-Max® gas hot plates are designed to be a reliable, versatile, and maintenance-free solution for almost any menu item. These units come in a wide variety of sizes and styles to fit any operation and provide the versatile, long-lasting solution you need.

The Ultra-Max® gas hot plates will be constructed in the U.S.A. with a cor-rosion-resistant stainless steel body and aluminized steel crumb tray. The grates will be constructed of cast iron and will utilize a non-tilt design.

Each square foot section will use an independently controlled 2-piece burner that produces 30,000 BTU per burner using natural gas [26,000 BTU on LP], and has a standing pilot. The units will have a 3/4-inch NPT male connection. The unit will be supplied with four [4] inch (102 mm) legs that are adjustable up 1.375 inches (35 mm).

These units come with a two [2] year warranty for parts and labor.

Star Manufacturing 265 Hobson St., Smithville, TN 37166 Phone: 800-264-7827 Web: star-mfg.com

Job Item No.

• 30,000 BTU per burner using natural gas [26,000 BTU on LP]

• Heavy-duty cast iron burners with lift-off burner heads and anti-clog design

• Standing pilot for each burner

• Heavy-duty cast iron grates incorporate non-tilt design

• Durable metal knobs with quarter-turn operation and gas regulators

• Cool-to-the-touch front panel and bullnose and protect knobs and provide a comfortable work area

• Extended plate shelf

• Universal stand

Printed in the U.S.A. 2M-Z21305 REV D (08-22) Specifications are subject to change without notice and are not intended for installation purposes.

Ultra-Max® Gas Hot Plate Standard 802HA, 804HA, 806HA, 808HA

806HA

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 2

15.1 in.

(384 mm)

0.5 in.

(13 mm)

4 in.

(102 mm)

2 in.

(51 mm)

5.1 in.

(130 mm)

13.8 in.

(351 mm)

32.25 in.

(819 mm)

.5 in.

( mm)

12 in.

(305 mm)

1.6 in.

(41 mm)

1.6 in.

(41 mm)

6.9 in.

(175 mm)

19.2 in.

(488 mm)

17.7 in.

(450 mm)

A

The gas fitting on each unit will be 3/4-inch NPT male.

Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclu-sions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.

Ultra-Max® Gas Hot Plate

CLEARANCES/INSTALLATION REQUIREMENTS

Please allow for at least nine [9] inches (229 mm) from the back and seven [7] inches (178 mm) from each side between the unit and any combustible surface.

Model Height Width [A] Depth BTI1 Natural Gas (LP) Approx. Ship Weight Approx. Weight Installed

802HA 15.1 in.

(384 mm)

12 in.

(305 mm)

32.25 in.

(819 mm)

60,000 (52,000)

108 lb.

(49 kg)

70 lb.

(32 kg)

804HA 15.1 in.

(384 mm)

24 in.

(610 mm)

32.25 in.

(819 mm)

120,000 (104,000)

194 lb.

(88 kg)

140 lb.

(63.5 kg)

806HA 15.1 in.

(384 mm)

36 in.

(914 mm)

32.25 in.

(819 mm)

180,000 (156,000)

270 lb.

(122.5 kg)

210 lb.

(95 kg)

808HA 15.1 in.

(384 mm)

48 in.

(1.22 m)

32.25 in.

(819 mm)

240,000 (208,000)

360 lb.

(163 kg)

280 lb.

(127 kg)

ST

AN

DA

RD

Standard 802HA, 804HA, 806HA, 808HA

Star Manufacturing 265 Hobson St., Smithville, TN 37166 Phone: 800-264-7827 Web: star-mfg.com

Printed in the U.S.A. 2M-Z21305 REV D (08-22) Specifications are subject to change without notice and are not intended for installation purposes.

Job Item No.

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 3

ITEM# 1.1 ‐ GAS CONNECTOR HOSE KIT / ASSEMBLY (1 KT REQ'D)

T&S Brass HG‐4D‐48K Safe‐T‐Link Gas Connector Kit, 3/4" connection, 48" hose, stainless steel braiding with extruded coating, (1) Quick‐ Disconnect, (1) street "EL", ball valve, restraining cable adjustable for 3'to 5', 180,000 BTU / hr minium flow capacity

T&S Brass HG‐4D‐48K Item #1.1

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 4

"L" = Length 1/2" NPT

12" HG-4C-12K

24" HG-4C-24K

36" HG-4C-36K

48" HG-4C-48K

60" HG-4C-60K

72" HG-4C-72K

"L" = Length 3/4" NPT

12" HG-4D-12K

24" HG-4D-24K

36" HG-4D-36K

48" HG-4D-48K

60" HG-4D-60K

72" HG-4D-72K

"L" = Length 1" NPT

12" HG-4E-12K

24" HG-4E-24K

36" HG-4E-36K

48" HG-4E-48K

60" HG-4E-60K

72" HG-4E-72K

"L" = Length 1 1/4" NPT

12" HG-4F-12K

24" HG-4F-24K

36" HG-4F-36K

48" HG-4F-48K

60" HG-4F-60K

72" HG-4F-72K

Installation Kit:

Restraining Cable, Street El, Ball Valve

Coated Gas Connector w/ NPT Male Ends & (1) 2-Piece Quick Disconnect

Street El

36D

Product Specifications:

Scale:

Model No.T&S BRASS AND BRONZE WORKS, INC.

08/24/16JRM

Item No.

HG - 4 - K

HG-4-K Series

Safe-T-Link Gas Appliance Connector: Coated Gas Hose, NPT Male

Travelers Rest, SC 29690

Date:

Ends, 2-Piece Quick Disconnect and Street Elbow

Ex: HG - 4 - K

(1) Street El, (1) Installation Kit

NSF 2

Customer/Wholesaler______________________________

NFPA 54

Model Specified_____________________ Quantity______

2 Saddleback Cove / P.O. Box 1088

Architect/Engineer_________________________________

Checked:Drawn: JBC JHB

Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com

Sheet: 1 ofApproved:

Contractor_______________________________________

1NTS

This Space for Architect/Engineer Approval

Job Name__________________________Date_________

Product Compliance:

ANSI Z21.69 / CSA 6.16

Gas Hose, 3/4" NPT Male Ends, 36" Length, (1) 2-Piece Quick Disconnect, HG-4-K Series Product Configurator:

T&S Brass HG‐4D‐48K Item #1.1

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 5

ITEM# 2 ‐ REACH‐IN REFRIGERATOR (1 EA REQ'D)

True Mfg. ‐ General Foodservice T‐23‐HC Refrigerator, reach‐in, one‐section, (1) solid door, (3) PVC coated adjustable wire shelves, interior lighting, stainless steel door, stainless steel front, aluminum sides, clear coated aluminum interior with stainless steel floor, 4" castors, R290 Hydrocarbon refrigerant, 1/4 HP, 115v/60/1‐ph, 2.2 amps, NEMA 5‐15P, cULus, UL EPH Classified, CE, Made in

USA, ENERGY STAR®

ACCESSORIES

Mfr Qty Model Spec

True Mfg. ‐ General Foodservice 1 NOTE: Commonly stocked model in right and left hinge; verify availability with factory

True Mfg. ‐ General Foodservice 1 Self‐contained refrigeration standard

True Mfg. ‐ General Foodservice 1 Door hinged right standard

True Mfg. ‐ General Foodservice 1 832051 Full door bun tray rack, 20‐7/8"W x 24"D x 51"H, each

True Mfg. ‐ General Foodservice 1 4" stem castors, standard (adds 5" to OA height)

ELECTRICAL

VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP

1 115 60 1 Cord & Plug

5‐15P 2.2 1/4

True Mfg. ‐ General Foodservice T‐23‐HC Item #2

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 6

Specifications subject to change without notice.

Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).

ROUGH-IN DATA

Model:

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

TRUE MANUFACTURING CO., INC.

U.S.A. FOODSERVICE DIVISION

2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 Fax (636)272-2408 • Toll Free (800)325-6152 • Intl Fax# (001)636-272-7546

Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com

Printed in U.S.A.

APPROVALS: AVAILABLE AT:

T-23-HC

T-Series:

Reach-In Solid Swing Door Refrigerator with Hydrocarbon Refrigerant

T-23-HC

�True’s solid door reach-in’s are designed with enduring quality that protects your long term investment.

�Designed using the highest quality materials and components to provide the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today’s food service marketplace.

�Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydro carbon refrigerant that has zero (0) ozone depletion potential (ODP), & three

(3) global warming potential (GWP).

�High capacity, factory balanced refrigeration system that maintains cabinet temperatures of 33°F to 38°F (.5°C to 3.3°C) for the best in food preservation.

�Stainless steel solid door and front. The finest stainless available with higher tensile strength for fewer dents and scratches.

�Adjustable, heavy duty PVC coated shelves.

�Positive seal self-closing door. Lifetime guaranteed door hinges and torsion type closure system.

Bottom mounted units feature

� ”No stoop” lower shelf.

�Storage on top of cabinet.

�Compressor performs in coolest, most grease free area of kitchen.

�Easily accessible condenser coil for cleaning.

Model Doors Shelves

Cabinet Dimensions (inches)

(mm)

HP Voltage Amps

NEMA

Config.

Cord Length

(total ft.)

(total m)

Crated Weight

(lbs.)

(kg)W D H*

T-23-HC 1 3 27 291/2 783/8 1/4 115/60/1 2.2 5-15P 9 270

686 750 1991 1/3 220-240V/50-60Hz 1.3 ▲ 2.74 123

* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs. ▲ Plug type varies by country.

INNOVATION

MADE WITH

IN THE USA

5/20

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 7

STANDARD FEATURES

Model:

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

PLAN VIEW

KCL

TRUE MANUFACTURING CO., INC.

2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 • Fax (636)272-2408 • Toll Free (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com

ELEVATION PLAN VIEW

27" (686 mm)

551/32" (1398 mm)

2517/32" (649 mm)

291/2" (750 mm)

835/16" (2117 mm)

785/16" (1990 mm)

5" (127 mm)

7615/16" (1955 mm)

13/8" (35 mm) 4"

(102 mm)

T-23-HC

T-Series:

Reach-In Solid Swing Door Refrigerator with Hydrocarbon Refrigerant

Model Elevation Right Plan 3D Back

T-23-HC TFEY53E TFEY03S TFEY03P TFEY633

DESIGN

• True’s commitment to using the highest quality materials and optimized refrigeration systems provides the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today’s food service marketplace.

REFRIGERATION SYSTEM

• Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero

(0) ozone depletion potential (ODP), & three

(3) global warming potential (GWP).

• High capacity, factory balanced refrigeration system that maintains cabinet temperatures of 33°F to 38°F (.5°C to 3.3°C) for the best in food preservation.

• State of the art, electronically commutated evaporator and condenser fan motors. ECM motors operate at higher peak efficiencies and move a more consistent volume of air which produces less heat, reduces energy consumption and provides greater motor reliability.

• Bottom mounted condensing unit positioned for easy maintenance.

Compressor runs in coolest and most grease free area of the kitchen. Allows for storage area on top of unit.

CABINET CONSTRUCTION

• Exterior - Stainless steel front. Anodized quality aluminum ends. Corrosion resistant GalFan coated steel back.

• Interior - attractive, NSF approved, clear coated aluminum liner. Stainless steel floor with coved corners.

• Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

• Welded, heavy duty steel frame rail, black powder coated for corrosion protection.

• Frame rail fitted with 4" (102 mm) diameter stem castors - locks provided on front set.

DOOR

• Stainless steel exterior with clear aluminum liner to match cabinet interior. Door extends full width of cabinet shell. Door locks standard.

• Lifetime guaranteed recessed door handle.

Door fitted with 12" (305 mm) long recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment.

• Positive seal self-closing door. Lifetime guaranteed door hinges and torsion type closure system.

• Magnetic door gasket of one piece construction, removable without tools for ease of cleaning.

SHELVING

• Three (3) adjustable, heavy duty PVC coated wire shelves 22 7/8"L x 23 1/4"D (582 mm x 591 mm). Four (4) chrome plated shelf clips included per shelf.

• Shelf support pilasters made of same material as cabinet interior; shelves are adjustable on 1/2" (13 mm) increments.

LIGHTING

• Interior lighting - safety shielded. Lights activated by rocker switch mounted above door.

MODEL FEATURES

potential of corrosion.

ELECTRICAL

• Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included.

OPTIONAL FEATURES/ACCESSORIES

Upcharge and lead times may apply.

❑ 230 - 240V / 50 Hz.

❑ 6" (153 mm) standard legs.

❑ 6" (153 mm) seismic/flanged legs.

❑ Alternate door hinging (factory installed).

❑ Additional shelves.

❑ Half door bun tray racks. Each holds up to eleven 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately).

❑ Full door bun tray rack. Holds up to twenty-two 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately).

(U.S.A. only)

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 8

ITEM# 3 ‐ CHEF BASE (2 EA REQ'D)

True Mfg. ‐ General Foodservice TRCB‐36‐HC Refrigerated Chef Base, 36‐3/8"W, one‐piece 300 series 18 gauge stainless steel top with V edge, (2) drawers (accommodates (1) 12" x 20" x 4" pans & (3) 1/6 size pans, NOT included), stainless steel front/sides, aluminum back, aluminum interior with stainless steel floor, 4" castors, R290 Hydrocarbon refrigerant, 1/5 HP, 115v/60/1‐ph, 5.7 amps, NEMA 5‐15P, cULus, UL EPH Classified, CE, Made in USA

ACCESSORIES

Mfr Qty Model Spec

True Mfg. ‐ General Foodservice 2 Self‐contained refrigeration standard

True Mfg. ‐ General Foodservice 2 4" Castors, standard

ELECTRICAL

VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP

1 115 60 1 Cord & Plug

5‐15P 5.7 1/5 15.0

True Mfg. ‐ General Foodservice TRCB‐36‐HC Item #3

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 9

ROUGH-IN DATA

Model:

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 Fax (636)272-2408 • Toll Free (800)325-6152 • Intl Fax# (001)636-272-7546

Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com

Printed in U.S.A.

APPROVALS: AVAILABLE AT:

TRUE MANUFACTURING CO., INC.

U.S.A. FOODSERVICE DIVISION

INNOVATION

MADE WITH

IN THE USA

10/22

TRCB-36-HC

Chef Base:

Drawered Refrigerator with Hydrocarbon Refrigerant

TRCB-36-HC

�True’s refrigerated chef bases are designed with enduring quality that protects your long term investment.

�Designed using the highest quality materials and components to provide the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today’s food service marketplace.

�Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydro carbon refrigerant that has zero (0) ozone depletion potential (ODP), & 0.02) global warming potential (GWP).

�Extra large evaporator coil balanced with higher horsepower compressor and large condenser; maintains cabinet temperatures of 33°F to 38°F (.5°C to 3.3°C) for the best in food preservation.

�Cabinet top is one piece, heavy duty reinforced stainless steel. Drip resistant “V” edge protects against spills. Supports up to 717 lbs. (326 kg).

�All stainless steel front, top and sides.

Corrosion resistant GalFan coated steel back.

�Each drawer accommodates one (1) 12"L x 20"W x 4"D (305 mm x 508 mm x 102

mm) full size and three (3) 6"L x 6"W x 4"D (153 mm x 153 mm x 102 mm) 1/6size food pans (sold separately).

�Heavy-duty stainless steel drawer slides and rollers. Removable without tools for easy cleaning.

�Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

Model Drawers

Cabinet Dimensions (inches)

(mm)

HP Voltage Amps

NEMA

Config.

Cord Length

(total ft.)

(total m)

Crated Weight

(lbs.)

(kg)W D† H*

TRCB-36-HC 2 363/8 321/8 201/2 1/4 115/60/1 2.4 5-15P 10 250

922 814 520 1/4 220-240V/50-60Hz 1.1 ▲ 3.05 114

† Depth does not include 1" (26 mm) for rear bumpers.

* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.

▲Plug type varies by country.

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 10

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

PLAN VIEW

KCL

TRUE MANUFACTURING CO., INC.

2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 • Fax (636)272-2408 • Toll Free (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com

36 5/16" 922mm

25 1/2" 648mm

20 15/32" 520mm

24" 610mm

1 29/32" 49mm

5 1/32" 128mm

4" 102mm

32 1/16" 814mm

1" 26mm

24 1/4" 616mm

57 5/16" 1456mm

2 7/16" 62mm

2 5/8" 66mm

30 15/32" 774mm

34 23/32" 882mm

MARINE EDGE

30º ANGLE

TRCB-36-HC

06/14/22

(U.S.A. and Canada only)

TRCB-36-HC

Chef Base:

Drawered Refrigerator with Hydrocarbon Refrigerant

Model Elevation Right Plan 3D Back

TRCB-36-HC

DESIGN

• True’s commitment to using the highest quality materials and oversized refrigeration systems provides the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today’s food service marketplace.

REFRIGERATION SYSTEM

• Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydro carbon refrigerant that has zero

(0) ozone depletion potential (ODP), & 0.02) global warming potential (GWP).

• Oversized, factory balanced refrigeration system with guided airflow to provide uniform product temperatures.

• Extra large evaporator coil balanced with higher horsepower compressor and large condenser; maintains cabinet temperatures of 33°F to 38°F (.5°C to 3.3°C) for the best in food preservation.

• Sealed, self-lubricating evaporator fan motor and larger fan blades give True chef base units a more efficient, low velocity, high volume airflow design. This unique design ensures faster temperature recovery and shorter run times in the busiest of food service environments.

• Condensing unit accessed from behind side grill; slides out for easy maintenance.

CABINET CONSTRUCTION

• Exterior - stainless steel front, top and sides.

Corrosion resistant GalFan coated steel back.

• Interior - attractive, white aluminum liner.

Stainless steel floor with coved corners.

• Insulation - entire cabinet structure and drawer facings are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

• 4" (102 mm) diameter plate castors - locks provided on front set.

• Cabinet top is one piece, heavy duty reinforced 300 series stainless steel. Drip resistant “V” edge protects against spills. Supports up to 717 lbs. (326 kg).

DRAWERS

• Stainless steel exterior drawer facings and liners. Stainless steel drawer frames.

• Each drawer fitted with 12" (305 mm) long recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment.

• Heavy-duty stainless steel drawer slides and rollers. Removable without tools for easy cleaning.

• Magnetic drawer gaskets of one piece construction, removable without tools for ease of cleaning.

• Each drawer accommodates one (1) 12"L x 20"W x 4"D (305 mm x 508 mm x 102 mm) full size and three (3) 6"L x 6"W x 4"D (153 mm x 153 mm x 102 mm) 1/6size food pans (sold separately).

• Drawers support a wide variety of incremental pan size configurations; each drawer standard with one (1) full length removable divider bar.

MODEL FEATURES

• Evaporator is epoxy coated to eliminate the potential of corrosion.

product.

ELECTRICAL

• Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included.

RECOMMENDED OPERATING CONDITIONS

• Counter-top cooking equipment should be used in conjunction with the manufacturer supplied legs. Minimum clearance of 4" (102 mm) is required between bottom of cooking equipment heating element and the TRCB top. Failure to provide clearance voids manufacturer warranty.

• Installation of a heat shield is recommended for optimum performance (supplied by others).

OPTIONAL FEATURES/ACCESSORIES

Upcharge and lead times may apply.

❑ 230 - 240V / 50 Hz.

❑ 6" (153 mm) standard legs (1 set of 4 leg mounting plates required).

❑ 6" (153 mm) seismic/flanged legs (1 set of 4 leg mounting plates required).

❑ Heavy duty, 16 gauge top (available for flat and marine top).

❑ Flat top (no marine edge).

❑ Additional size drawer divider bars.

❑ Drawer locks.

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 11

ITEM# 4 ‐ MICROWAVE CONVECTION OVEN (1 EA REQ'D)

ACP MXP22DMT

XpressChef™ 4i Series Express High Speed Combination Oven, countertop, 1.38 cu. ft. capacity, 2000 watts convection, 2200 watts microwave, 3000 watts infrared, 7" True‐Touch™ HD touchscreen display, 200°F to 520°F (95°C‐ 270°C) temperature range, stackable, (1) removable rack, 4‐stage cooking, (11) power levels, (1200+) menu settings,

(360) memory settings, 60‐minute max cooking time, USB port, wifi & ethernet connectivity, catalytic converter, solid pull down door with ergonomic handle, non‐stick oven liner, porcelain infrared element cover, (2) removable air filters, clean filter reminder, includes: sample cleaner kit, (1) package of non‐stick liners (TL10T) & (1) oven paddle (PA10), stainless steel interior, stainless steel & painted steel exterior, 208‐240v/60/1‐ph, 27.4 amps, 30 MCA, 5700 watts (total), cord, NEMA 6‐30P, UL, ETL, NSF, CSA, FDA, ETL EU, cETLus, ETL‐Sanitation, CE

ELECTRICAL

VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP

1 208‐240 60 1 Cord & Plug

6‐30P 27.4 5.7 30

ACP MXP22DMT Item #4

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 12

225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A. | 800-233-2366 | 319-368-8120 | Fax: 319-368-8198 | www.acpsolutions.com

© 2020 ACP, Inc.

Cedar Rapids, Iowa 52404

AIA File #:

Specification #:

Item #:

Project #:

Service All products are backed by the ACP, Inc.

24/7 ComServ Support Center

Warranty Warranty Certificate for this product can be found on the ACP, Inc. website at www.acpsolutions.com/warranty

Safety and Sanitation This ACP, Inc. product meets and exceeds safety and sanitation standards set for commercial microwave ovens by UL, ETL, NSF, CSA, FDA, ETL EU and CE

Included Accessories:

• Oven paddle (PA10)

• Non-stick liners (TL10)

Optional Accessories

• Panini grill plate (GR10)

• Panini Press (PRS10)

• Pizza Stone (ST10X)

• Square metal pan (SQ10)

• 4” (102mm) Leg kit (LG10)

• Non-stick baskets (NB10, OB10, TB10/S, SB10/S, MB10/S)

• Stainless cart/equipment stands: (CA24, CA30)

• Oven Cleaner and Shield Protectant (CL10*, SH10*, CL10W**, PR10W**)

High Speed Combination Oven XpressChef™ 4i Series Superior cooking results FAST!

• 2000W impingement enhances browning. Easily adjustable 0-100% fan speed

• 95º - 270ºC (200º - 520ºF) convection temperature range

• 3000W Infra-red radiant enhances toasting, browning, and crisping

• 2000 - 2200W dual side antenna feed microwave system heats quickly reduces cooking time

Simplifies cooking

• True-Touch™ HD Touchscreen. Fully customizable 178mm (7”) smartphone-like display

• Catalytic converter built-in for ventless operation

• Large interior easily accommodates a 35cm (14”) pizza

Multi-language universal operation, with programming flexibility

• Touchscreen and programming software supports 25 languages

• Image-based menu selection eliminates language and literary barriers

• Connectivity Standard: WiFi, Ethernet, and Smart USB standard

Cuts Costs

• Uses less energy than a conventional oven

• Eliminates need for pre-cooking and holding

• Uses standard metal trays, pans and screens

Safe operation and simple cleaning

• Inner door drops down below cooking surface for safe removal of food from cavity

• Porcelain IR element cover enhances operator safety and simplifies maintenance

• Infra-red element tilts-up for cleaning

• Non-stick oven liners preinstalled for easy cleaning

• Two removable, cleanable, and reusable air filters protect oven components

XpressChef™ 4i Series | Heavy Volume This category of high speed oven is ideal for…

Applications

• Theatres

• Convenience Stores

• Satellite Locations

• Healthcare

• Stadiums

• Pizzerias

• Hotel Room Service

• Campus Dining

• Snack Bars

Through put potential (per hour)

Location of Oven(s):

• Kitchen countertop, single or stacked

• Kitchen shelf

• Equipment stand

All ACP, Inc. commercial ovens are supported by our Culinary Center. Do not hesitate to contact us for any questions regarding food preparation, menu development and cooking times: testkitchen@acpsolutions.com

Patents Pending

Food item QTY per hour

30cm (12”) frozen pizza 21 15cm (6”) toasted sandwiches 80+ Grilled fresh Salmon 28 0.45kg (1 lb.) fresh shrimp 55 Toasted Bagel 120 Chicken wings 24 Quesadillas 70

*Only shipped in U.S.A.

** Only shipped in Europe

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 13

© 2020 ACP, Inc., Cedar Rapids, Iowa 52404

225 49th Ave. Dr. SW, Cedar Rapids, IA 52404 U.S.A.

800-233-2366 • 319-368-8120 • Fax: 319-368-8198 www.acpsolutions.com

AI

A

Fi le

Sp ec ifi ca tio n

940 mm (37”)

638 mm (25-1⁄8”)

604 mm (23-¾”)

707 mm (27-13⁄16”)

151 mm (6”)

32 mm (¼”)

516 mm (20-5⁄16”)

563 mm (22-3⁄16”)

Part No. 20271214 Updated 01/06/2020

XpressChef™ 4i Series | High Speed Combination Oven side view back viewfront view

Drawings available from KCL CADlog - techs@kclcad.com

Electrical Configuration

Region Model#/

UPC Power Consumption Power Output/Cooking Power

Power Source Plug Configuration Cord

Length Frequency MagnetronImpingement IR-Radiant Microwave

North America single phase

MXP22TLT

728028377149

5700 W, 27.4 A 2000 W 3000 W 2200 W* 208-240 V, 60 Hz, 30 A, single phase

NEMA

6-30P

1.5m (5 ft.)

2450 MHz 2

Brazil single phase

MXP22BT

728028422597

5700 W, 27.4 A 2000 W 3000 W 2200 W* 220V, 60 Hz, 32 A, single phase

IEC 309 2.4 m (8 ft.)

2450 MHz 2

EMEA, APAC, LATAM

single phase

MXP5221TLT

728028422580

5800 W, 27.4 A 2000 W 3000 W 2200 W* 230-240 V, 50 Hz, 32 A, single phase

IEC 309 2.4 m (8 ft.)

2450 MHz 2

EMEA, APAC, LATAM

multi phase

MXP5223TLT

728028422634

5800 W, 16 A 2000 W 3000 W 2200 W* 400 V, 50 Hz, Wye, 16 A, 3 phase, 5 wire

IEC 309 2.4 m (8 ft.)

2450 MHz 2

Japan single phase

MXP5201JT

728028422603

5000 W, 27.4 A 2000 W 2900 W 2000 W* 200V, 50 Hz, 30 A, single phase

NEMA

L6-30P

1.5 m (5 ft)

2450 MHz 2

Japan single phase

MXP6201JT

728028422610

5000 W, 27.4 A 2000 W 2900 W 2000 W* 200V, 60 Hz, 30 A single phase

NEMA

L6-30P

1.5 m (5 ft)

2450 MHz 2

Saudi Arabia single phase

MXP22TLTSA

728028423198

5700 W, 27.4 A 2000 W 3000 W 2200 W* 220 V, 60 Hz, 30 A, single phase

Direct Wire

1.5m (5 ft.)

2450 MHz 2

Features Configuration Countertop Stackable Yes

Display 178 (7") Capacitive Touch, High resolution LCD display

USB Port Yes Connectivity Wifi and Ethernet Program Menu Tab & Multi-level menu capability Menu Capacity 1200+ items Max. Cooking Time 99:99 Temperature Range 95° - 270°C (200° - 520°F) Microwave Distribution Double side oscillating antenna Fan Speed 0-100% Power Levels 11 Defrost Yes, microwave only, power level 2 Time Entry Option Yes Stage Cooking Yes, 4 Catalytic Converter Yes‡ Automatic Voltage Sensor Yes (North America only) Air Filter 2 removable, with clean filter reminder Rack 1 rack position, removable Door Opening Pull down, ergonomic handle Exterior Finish Stainless steel & Painted Steel Interior Finish Stainless steel

Dimensions Exterior H 516 (20 5/16”) W 638 (25 1/8”) D† 707 (27 13/16”) Cavity H 254 (10”) W 406 (16”) D 381 (15”) Usable Cavity Space 39 liter (1.38 cubic ft.)

Door Depth 940 (37”), drop down door Installation Clearances Top: 51 (2”) Sides: 25 (1”) Back: None Shipping Carton H 622 (24 1/2”) W 879 (34 5/8”) D 828 (32 5/8”)

Weight Product Weight 68 kg (150 lbs.)

Ship weight (approx.) 79 kg (175 lbs.)

ACP, Inc. requires installing a type D circuit breaker for all high-speed oven installations.

Measurements are millimeters. Measurements in ( ) are US Standard

* IEC 60705 Tested † Includes handle ‡ Catalytic convertor filters grease and odors from the air. This product conforms to the Ventless Operation Recommendations set forth by NFPA96 using EPA202 test method EMEA = Europe, the Middle East and Africa; APAC = Asia Pacific and Oceania; LATAM=Latin America

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 14

ITEM# 5 ‐ GRIDDLE, GAS, COUNTERTOP (1 EA REQ'D)

Star 636TCHSF Star‐Max® Heavy Duty Griddle, gas, countertop, 36" W x 21" D cooking surface, 1" thick chrome griddle plate, embedded modulating thermostat every 12", heavy duty knobs, wrap‐around stainless steel splash guard, grease trough & stainless steel drawer, welded steel frame with stainless steel front, 4" legs, 84,900 BTU, cULus, UL EPH Classified, Made in USA (ships Natural gas includes LP conversion kit) <Existing>

GAS STEAM

SIZE MBTU KW INLET SIZE RETURN SIZE LB/HR PSIG (min) PSIG (max)

1 3/4" 84.9 1

Star 636TCHSF Item #5

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 15

Star-Max®manual gas griddles are a perfect match for the budget minded operator. For breakfast, lunch or dinner, the Star-Max manual control griddles out-perform the competition. Star-Max® griddles feature 1” thick polished steel griddle plate and are available in 15”, 24” 36” and 48” widths. 28,300 BTU aluminized burner every 12” of width controlled by a modulating thermostatic, 3/4” N.P.T.

male gas connection with convertible pressure regulator, and 4” adjustable legs. Griddles operate on Natural or Propane gas.

Gas griddles are constructed with stainless steel panel and double wall aluminized steel side panels. Griddle plate is 1” (2.54 cm) thick, 4-1/2” high tapered wrap-around stainless steel splash guard come standard. Unit has a 3-1/4” (8.3 cm) wide front grease trough with grease chute and a 4-1/2 quart (4.26 L) stainless steel grease drawer.

Unit is heated by 28,300 BTU aluminized steel burner for every 12” (30.5 cm) of griddle width and is controlled by a modulating thermostat embedded into griddle plate. Thermostat knobs are protected by a stainless steel bull nose front. An automatic safety pilot is provided for each burner. Griddles are supplied with 4” (10.2

cm) high die cast nickel plated steel legs that have a 1-3/8” (3.5 cm) adjustment. Gas connection is 3/4” N.P.T. male and a convertible pressure regulator is provided. Units are approved for installation within 6” (15.2 cm) of combustible and non-combustible surfaces and are UL Gas certified and UL EPH sanitation listed.

• Highly polished 1” thick polished steel or chrome plate

• Modulating thermostat inserted into the griddle plate 3/16” from the cooking surface, adjusts from 150° to 450°F providing quick response to surface temperature change

• Available in 15”, 24”, 36” and 48” widths

• Heavy duty chrome plated cast zinc knobs

• 28,300 BTU aluminized U-shaped steel burner every 12” of cooking surface provide even heat distribution

• Heavy-duty all-welded body construction with stainless steel front, bull nose and 4-1/2” high tapered splash guard

• Cool-to-the-touch stainless steel bull nose front provides knob protection and comfortable work zone

• Spatula wide 3-1/4” front grease trough and grease chute for easy cleaning

• Large 4-1/2 quart stainless steel grease drawer

• All units shipped for Natural Gas Service with LP conversion kit and reversible regulator

• Heavy-duty 4” adjustable legs

Star-Max® Manual & Embedded Thermostatic Gas Griddles

Manual .615MF .624MF .636MF .648MF

Embedded Modulating Thermostat (Polished Steel) .615TF .624TF .636TF .648TF

Embedded Modulating Thermostat (Chrome Plate) .624TCHSF .636TCHSF .648TCHSF

Embedded Electric Snap-Action Thermostat w/Pilot Safety .624TSPF .636TSPF .648TSPF

Job Item No.

Printed in the U.S.A. • 2M-Z24122 • Rev A • 3.2021

Specifications are subject to change without notice and are not intended for installation purposes.

DESCRIPTION

SPECIFICATIONS

FEATURES

CERTIFICATIONS

USAMADE IN THE

636TF

These units come with a two [2] year warranty for parts and labor.

WARRANTY

STAR MANUFACTURING INTERNATIONAL INC.

265 Hobson St. • Smithville, TN 37166

Telephone 800 264 7827 star-mfg.com

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 16

Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.

1All units ship for Natural Gas service. Propane conversion kits included

Printed in the U.S.A. • 2M-Z24122 • Rev A • 3.2021

Specifications are subject to change without notice and are not intended for installation purposes.

MODEL

WIDTH

[A]

in. (mm)

DEPTH

in.

(mm)

HEIGHT

in.

(mm)

BTU1 PLATE

DEPTH

APPROX. SHIP

WEIGHT

APPROX. WEIGHT

INSTALLED

615 15.0 (381.0)

29.0 (736.6)

15.5 (393.7) 28,300

20.5” (520.7 mm)

90 lb.

(40.8 kg)

83 lb.

(37.7 kg)

624 24.0 (610.0)

29.0 (736.6)

15.5 (393.7) 56,600 175 lb.

(79.4 kg) 165 lb.

(74.8 kg)

636 36 .0 (914.4)

29.0 (736.6)

15.5 (393.7) 84,900 262 lb.

(118.8 kg) 247 lb.

(112.0 kg)

648 48.0 (1219.4)

29.0 (736.6)

15.5 (393.7) 113,200 350 lb.

(158.8 kg) 330 lb.

(149.7 kg)

CLEARANCES

These units can be installed on non-combustible countertops using the provided four [4] inch (102 mm) legs or on a combustible floor using a minimum 27-inch (636 mm) tall stand. The back and both sides must be at least six [6] inches (152.4 mm) from any combustible surface.

624xx is the model used in this drawing

Star-Max® Manual & Embedded Thermostatic Gas Griddles

Manual .615MF .624MF .636MF .648MF

Embedded Modulating Thermostat (Polished Steel) .615TF .624TF .636TF .648TF

Embedded Modulating Thermostat (Chrome Plate) .624TCHSF .636TCHSF .648TCHSF

Embedded Electric Snap-Action Thermostat w/Pilot Safety .624TSPF .636TSPF .648TSPF

STAR MANUFACTURING INTERNATIONAL INC.

265 Hobson St. • Smithville, TN 37166

Telephone 800 264 7827 star-mfg.com

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 17

ITEM# 5.1 ‐ GAS CONNECTOR HOSE KIT / ASSEMBLY (1 KT REQ'D)

T&S Brass HG‐4D‐48K Safe‐T‐Link Gas Connector Kit, 3/4" connection, 48" hose, stainless steel braiding with extruded coating, (1) Quick‐ Disconnect, (1) street "EL", ball valve, restraining cable adjustable for 3'to 5', 180,000 BTU / hr minium flow capacity The spec sheet for this item can be viewed on item 1.1)

T&S Brass HG‐4D‐48K Item #5.1

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 18

ITEM# 6 ‐ MEGA TOP SANDWICH / SALAD PREPARATION REFRIGERATOR (1 EA REQ'D)

True Mfg. ‐ General Foodservice TFP‐32‐12M‐D‐2 Sandwich/Salad Unit, one‐section, rear mounted self‐contained refrigeration, 8"D x 1/2" thick cutting board, (2) drawers, accommodates (2) 12" x 20" x 6"D pans each (NOT included), includes: (12) 1/6 size clear polycarbonate insert pans (top), stainless steel front/top/sides, aluminum back, aluminum interior with stainless steel floor, 2‐1/2" castors, 1/5 HP, 115v/60/1‐ph, 3.3 amps, NEMA 5‐15P, cULus, UL EPH Classified, Made in USA

ACCESSORIES

Mfr Qty Model Spec

True Mfg. ‐ General Foodservice 1 Self‐contained refrigeration standard

ELECTRICAL

VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP

1 115 60 1 Cord & Plug

5‐15P 3.3 1/5 15.0

True Mfg. ‐ General Foodservice TFP‐32‐12M‐D‐2 Item #6

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 19

ROUGH-IN DATA

Model:

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

TRUE MANUFACTURING CO., INC.

U.S.A. FOODSERVICE DIVISION

2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 Fax (636)272-2408 • Toll Free (800)325-6152 • Intl Fax# (001)636-272-7546

Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com

Printed in U.S.A.

APPROVALS: AVAILABLE AT:

TFP-32-12M-D-2

Food Prep Table:

Drawered Food Prep Unit

TFP-32-12M-D-2

Model Drawers Pans (top)

Cabinet Dimensions (inches)

(mm)

HP Voltage Amps

NEMA

Config.

Cord Length

(total ft.)

(total m)

Crated Weight

(lbs.)

(kg)L D† H*

TFP-32-12M-D-2 2 12 321/8 311/2 453/4 1/5 115/60/1 3.3 5-15P 7 315

816 801 1162 1/4 230-240/50/1 1.9 2.13 143

† Depth does not include 2" (51 mm) for cutting board.

* Height does not include 3/4" (19 mm) for castors.

�True’s food prep units are designed with enduring quality that protects your long term investment.

�Energy saving, environmentally friendly (134A), exclusive forced-air refrigeration system holds 33°F to 41°F (.5°C to 5°C).

�All stainless steel front, top and ends. Corrosion resistant GalFan coated steel back.

� Interior - attractive, NSF approved, clear coated aluminum liner. Stainless steel floor with coved corners.

�8" (204 mm) deep, 1/2" (13 mm) thick, full length removable cutting board included.

Sanitary, high density, NSF approved white polyethylene provides tough preparation surface.

�Each drawer accommodates Two (2) full size 12"L x 20”W x 6"D (305 mm x 508 mm x 153

mm) food pan (sold separately).

�Heavy-duty stainless steel drawer slides and rollers.

�Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

INNOVATION

MADE WITH

IN THE USA

6/18-A

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 20

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

PLAN VIEW

KCL

TRUE MANUFACTURING CO., INC.

2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 • Fax (636)272-2408 • Toll Free (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com

TFP-32-12M-D-2

351/4" (896 mm)

101/2" (267 mm)

101/2" (267 mm)

ELEVATION RIGHT VIEW WITH HOOD

TOP VIEW

321/8" (816 mm)

271/2" (699 mm)

25/16" (59 mm)

25/16" (59 mm)

351/4" (896 mm)

3/4" (19 mm) 3/4"

(19 mm)

1/2" (13 mm)

Cutting Board

311/2" (800 mm)

3317/32" (852 mm)

159/32" (389 mm)

257/32" (641 mm)

727/32" (201 mm)

1011/16" (272 mm)

925/32" (249 mm)

321/8" (816 mm)

263/32" (638 mm)

237/8" (607 mm)

237/8" (607 mm)

2325/32" (604 mm)453/4"

(1162 mm)

36" (915 mm)

Food Prep Table:

Drawered Food Prep Unit

Model Elevation Right Plan 3D Back

TFP-32-12M-D-2

DESIGN

• True’s commitment to using the highest quality materials and oversized refrigeration systems provides the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today’s food service marketplace.

REFRIGERATION SYSTEM

• Factory engineered, self-contained, capillary tube system using environmentally friendly (CFC free) 134A refrigerant.

• Energy saving, factory balanced refrigeration system with guided airflow to provide uniform temperature in food pans and cabinet interior.

• Exclusive forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7.

• High efficiency evaporator fan motor and larger fan blades give True Food Prep units a more efficient, low velocity, high volume airflow design.

• Easy access to all condensing unit components from back of cabinet.

CABINET CONSTRUCTION

• Exterior - stainless steel front, top and ends. Corrosion resistant GalFan coated steel back.

• Interior - attractive, NSF approved, clear coated aluminum liner. Stainless steel floor with coved corners.

• Insulation - entire cabinet structure and drawer facings are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential

(GWP).

• 2 1/2" (64 mm) diameter castors - locks provided on front set.

DRAWERS

• Stainless steel exterior drawer facings and liners. Stainless steel drawer frames.

• Each drawer fitted with 12" (305 mm) long recessed handle.

• Magnetic drawer gaskets of one piece construction, removable without tools for ease of cleaning.

• Heavy-duty stainless steel drawer slides and rollers. Removable without tools for easy cleaning.

• Each drawer accommodates two (2) full size 12"L x 20”W x 6"D (305 mm x 508 mm x 153 mm) food pan (sold separately).

Drawer will support varying size pan configurations with available pan divider bars (drawer pans sold separately).

MODEL FEATURES

• Evaporator is epoxy coated to eliminate the potential of corrosion.

• 8" (204 mm) deep, full length removable cutting board. Sanitary, high-density, NSF approved white polyethylene provides tough preparation surface.

• Stainless steel, patented, foam insulated lid and hood keep pan temperatures colder, lock in freshness and minimize condensation. Removable for easy cleaning.

• Comes standard with 12 ( 1/6size) 6 7/8 "L x 6 1/4”W x 4"D (175 mm x 159 mm x 102

mm) clear polycarbonate, NSF approved, food pans in countertop prep area.

• Countertop pan opening designed to fit varying size pan configurations with available pan divider bars. Varying size pans supplied by others.

• NSF/ANSI Standard 7 compliant for open food product.

ELECTRICAL

• Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included.

OPTIONAL FEATURES/ACCESSORIES

Upcharge and lead times may apply.

❑ Single overshelf ❑ Double overshelf

WARRANTY

Three year warranty on all parts and labor and an additional 2 year warranty on compressor.

(U.S.A. only)

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 21

ITEM# 7 ‐ HOT FOOD WELL UNIT, DROP‐IN, ELECTRIC (1 EA REQ'D)

Hatco HWBI‐6DA Drop‐In Modular/Ganged Heated Well, with drains & auto‐fill, (6) full size pan capacity, insulated, top mounted, remote thermostat with separate power switch, stainless steel & Aluminized construction (standard watt), cULus, UL EPH Classified, Made in USA

ACCESSORIES

Mfr Qty Model Spec

Hatco 1 NOTE: Sale of this product must comply with Hatco's Minimum Resale Price Policy; consult order acknowledgement for details

Hatco 1 NOTE: Includes 24/7 parts & service assistance, call 800‐558‐0607

Hatco 1 208v/60/1, 7215w, 34.7 amps

Hatco 1 Single remote control configuration

Hatco 1 23‐5/8" bezel depth, standard

ELECTRICAL

VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP

1 208 60 1 34.7 7.215

WATER WASTE

HOT

SIZE

HOT

AFF

HOT

GPH

COLD

SIZE

COLD

AFF

FILTERED

SIZE

FILTERED

AFF

CONDENSER

INLET SIZE

CONDENSER

OUTLET SIZE

INDIRECT

SIZE

DIRECT

SIZE

1 1/4" 1 (6) 3/4"

Hatco HWBI‐6DA Item #7

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 22

Project

Item #

Quantity

For operation, location and safety information, please refer to the Installation and Operating Manual.

HATCO CORPORATION l P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. l (800) 558-0607 l (414) 671-6350 www.hatcocorp.com l support@hatcocorp.com l Find a Hatco Rep l Image Library l Document Library l Chat

Form No. HWBI, HWBLI-MOD Spec Sheet Page 1 of 4 May 2021

Drop-In Modular/Ganged Heated Wells Models:

HWBI-1, -1D, -1DA

HWBI-2, -2D, -2DA, -2M, -2MA,

HWBI-3, -3D, -3DA, -3M, -3MA,

HWBI-4, -4D, -4DA, -4M, -4MA,

HWBI-5, -5D, -5DA, -5M, -5MA,

HWBI-6, -6D, -6DA, -6M, -6MA

HWBLI-1, -1D, -1DA

HWBLI-2, -2D, -2DA, -2M, -2MA,

HWBLI-3, -3D, -3DA, -3M, -3MA,

HWBLI-4, -4D, -4DA, -4M, -4MA,

HWBLI-5, -5D, -5DA, -5M, -5MA,

HWBLI-6, -6D, -6DA, -6M, -6MA

Options (available at time of purchase only) c Surface Hole Mounting to Countertop (Includes EZ Lock) c Stud Mounting to Countertop c Three-Phase Wiring (not available on HWBI-1 series or export voltages) c 3 foot (914 mm) flexible conduit only available with split control boxes – not available in Canada. 6' [1829 mm] conduit is standard.

c Copper Drain Manifold with side exit (not available on 120V units, HWBI-1 or HWBLI-1 Series) c Copper Drain Manifold with bottom exit (not available on 120V units, HWBI-1 or HWBLI-1 Series) c Cord for HWBLI-2, -3 or HWBI-1, -2, -3, -4, -5, -6

(Single phase/single control box only, not for export voltages) c 27" D (686 mm) Bezel for modular unit to match Hatco CWB models in a countertop display

Accessories Heated Well Covers with simulated stone inset (use only in dry mode):

c 1 Pan Well Cover (14" [356 mm] W x 22" [559 mm] D x 2" H [51mm]):

c Night Sky c Gray Granite c Bermuda Sand c 2 Pan Well Cover (28" [711 mm] W x 22" [559 mm] D x 2" H [51mm]):

c Night Sky c Gray Granite c Bermuda Sand

Rectangular Full-Size Stainless Steel Food Pans:

c Third-Size (2.5" [64 mm] H) c Half-Size (2.5" [64 mm] H) c Full-Size (2.5" [64 mm] H) c Full-Size (4" [101 mm] H) c Full-Size (6" [152 mm] H)

Round Food Pans: c 4 Quart (4 Liter) c 7 Quart (7 Liter) Hinged Lid for Round Pans: c 4 Quart (4 Liter) c 7 Quart (7 Liter) Notched Lid for Round Pans: c 4 Quart (4 Liter) c 7 Quart (7 Liter) Stainless Steel Wire Trivets: c Half-Size c Full-Size Plated Wire Trivets: c Half-Size c Full-Size Adapter to Convert Warmers to hold Round Pans:

c Holds two 4-Quart (4-Liter) Rounds c Holds two 7-Quart (7-Liter) Rounds

Support Bars: c 12" (305 mm) c 20" (508 mm) External Copper Drain Manifold with Individual Shut-Off Valves per Well

(Only for units with individual drains):

c 2-Pan Unit c 3-Pan Unit c 4-Pan Unit c 5-Pan Unit c 6-Pan Unit

Ball Valve for Unit with Drains: c ¾" c 1" Gate Valve for Unit with Drains: c ¾" c 1" c Heated Well Remote Handle for ¾" drains

Hatco Modular/Ganged Heated Wells keep hot food at safe serving temperatures, with better quality construction, longer holding times and more accurate temperatures.

They are full-sized wells, grouped together in a modular fashion to provide customers with a complete steam table contained within one piece of equipment. This means easy installation with a clean integrated look for your steam table.

Choose the number of wells, from 1 to 6 unit configurations, as well as voltage, auto-fill, controls, drain, cord and mounting options. Each well has its own individual control to regulate the temperature of each separate food offering.

Standard features

• Longer holding times with more accurate temperatures

• Separate lighted On/Off rocker switch and temperature dial for easy operation

• 50% larger drain with flat screen simplifies cleaning and holds pans level

• Unique design allows quick change of element or thermostat if needed

• EZ locking hardware for quick installation

• Stainless steel construction and solid brazed drain fitting joints for durability

• A 6' (1829 mm) conduit is included for convenient placement of controls

HWBI-5MA with accessory food pans and optional split control boxes

Well cover accessories with Swanstone® simulated stone surface converts the well to a heated shelf. Available in one or two pan covers and is placed on top the well unit with no installation required.

Hatco HWBI‐6DA Item #7

DM&A VA Hospital ‐ Brockton R2 FinalRI R1 Singer Equipment Co ‐ Bellmawr Page: 23 https://www.hatcocorp.com/en https://www.hatcocorp.com/cms/IOMANUALS/000000002199481-00000-20080709.PDF https://www.hatcocorp.com/en mailto:support%40hatcocorp.com?subject= https://www.hatcocorp.com/en/support/find-a-rep https://www.hatcocorp.com/en/resources/image-library https://www.hatcocorp.com/en/resources/document-library http://messenger.providesupport.com/messenger/09icew6fjvmk507jd84boe6v2r.html https://www.hatcocorp.com/en/equipment/wells/drop-in-heated-wells/drop-in-modular-ganged-heated-well-hwbi

HATCO CORPORATION l P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. l (800) 558-0607 l (414) 671-6350 www.hatcocorp.com l support@hatcocorp.com l Find a Hatco Rep l Image Library l Document Library l Chat

Form No. HWBI, HWBLI-MOD Spec Sheet Page 2 of 4 May 2021

1. Desired Voltage:

HWBLI-1, -2, -3, -4, -5, -6 (D, DA, M, MA) 120V,

single phase, export voltage not available HWBI-1, -2, -3, -4, -5, -6 Series (D, DA, M, MA) 208, 220 or 240V, export voltages available A. Single phase

B. Three phase (Optional, not available for export

2. Desired Wattage:

A. Standard Watt B. Low Watt (120V only)

3. Number of Modular/Ganged Heated

Wells Required:

1-, 2-, 3-, 4-, 5-, or 6-pan NOTE: Modular/Ganged units are only offered as rectangular, full-size (12" x 20" [305 x 508 mm])

4. Drain (With or without – choose drain below):

A. Standard Individual Well ¾" NPT Drain B. Manifold 1" NPT Drain with side drain, field selectable left or right side (Available on HWBI or HWBLI-2, -3, -4, -5, -6 models only)

C. Manifold 1" NPT Drain with bottom drain, field selectable left or right well (Available on HWBI or HWBLI -2, -3, -4, -5, -6 models only)

5. Auto-fill (With or without)

6. Mounting Style (All Modular/Ganged units are top mounted only):

A. EZ Locking Hardware B. EZ Locking Hardware with 2" (51 mm) Studs C. EZ Locking Hardware with Surface Holes

7. Bezel A. Standard: 23.625" (600 mm) B. Oversized: allows a 27" (686 mm) deep bezel to match Hatco CWB in a countertop display

8. Agency:

A. UL, C-UL

B. UL-EPH (Sanitary listing)

C. CE mark available on standard watt models

9. Control:

A. Single Control box (Standard on all units) B. Split Controls boxes (Optional on 4-, 5-, 6-pan units, not available in Canada)

Drop-In Modular/Ganged Heated Wells Models: HWBI/HWBLI-1, -2, -3, -4, -5, -6 (with/without Drains and Manifolds)

Ordering Instructions (Please specify the following with each order)

HWBI/HWBLI-5 Series

All HWBI/HWBLI-1, 2, -3, -4, -5, -6 (Side view)

HWBI/HWBLI-1 Series

HWBI/HWBLI-3 Series

HWBI/HWBLI-4 Series

HWBI/HWBLI-2 Series

HWBI/HWBLI-6 Series

57.5"…