Attachment_5-Commercial_Lab_Test_Report_Example.pdf
PDF 588 KB Posted
- Attached to
- Iraq Federal contract opportunity
- Solicitation number
- SPE605-19-R-0212
- Issued by
- Defense Logistics Agency Energy
About this file
This document contains a commercial laboratory test report example and information about a related federal contract opportunity. The laboratory test report details the results of analytical testing performed on a Jet A-1 fuel sample. Tests conducted included measurements for appearance, color, acid number, aromatics content, mercaptan sulfur, total sulfur content, initial and final boiling points, flash point, density, freezing point, kinematic viscosity, net heat of combustion, smoke point, copper corrosion, and test temperature. All test results were within the specified limits.
The associated federal contract opportunity is solicitation number SPE605-19-R-0212 for fuels support in Iraq. The Defense Logistics Agency Energy is listed as the contracting agency. No further details are provided on the required products or services, response deadline, or award information.
Attachment 5
View the file
Other files for this federal contract opportunity
Show all 16
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Report of Analysis
Laboratory Report ID
Job No.
Client Reference
Sample ID Date Taken 28-Nov-2016 : :
Product Jet A-1 Date Submitted 29-Nov-2016 : :
03-Dec-2016 Date Tested : : Sampling Point As Below
: Drawn By : Job Location
Grade: Jet A1, Shore Tank No. 1, Composite Sample, Terminal: Date: 28/11/2016, Time: 1230 H Representing :
Method Result Units Specification Limit Test
Clear, bright and visually free from solid matter and undissolved water at ambient temperature
Clear, bright and visually free from solid matter and undissolved water at ambient temperature
Appearance ASTM D4176
+8Saybolt Color Units ASTM D156
Max 0.015 0.006 Acid Number mg KOH/g ASTM D3242
6.4 Aromatics Vol % Max 25.0 ASTM D1319
Max 0.0030 0.0008 Mercaptan Sulfur Wt % ASTM D3227
Max 0.3 0.17 Sulfur Content Wt % ASTM D4294
151.1 Initial Boiling Point °C ASTM D86
Max 205.0 181.3 10% Recovery °C
207.1 50% Recovery °C
234.6 90% Recovery °C
Max 300.0 249.5 Final Boiling Point °C
Max 1.5 1.0 Corrected Loss Vol %
Max 1.5 1.0 Corrected Residue Vol %
Min 38.0 41.5 Abel Flash Point °C IP 170
0.7938 Density @ 15°C kg/L 0.7750 – 0.8400 ASTM D4052
Max -47.0 -48.5Freezing Point °C ASTM D2386
Max 8.000 3.943 Kinematic Viscosity @ -20 ºC mm²/s ASTM D445
Min 42.800 43.598 Net Heat of Combustion MJ/kg ASTM D3338/D3338M
Min 25.0 25.0 Smoke Point mm ASTM D1322
Max 1 1a Copper Corrosion @ 100ºC / 2 hr ASTM D130
Min 260 260 Test Temperature of Fuel °C ASTM D3241
<3, no Peacock or Abnormal color deposits
1 Heater Tube Deposit Color
Max 25 0 Maximum Pressure Drop Across Filter mm Hg
Max 7 1 Existent Gum Content mg/100ml ASTM D381
Max 1.00 0.92 Total Particulates Contamination mg/L ASTM D5452
1b Max 1b Interface Condition ASTM D1094
Min 70 47** MSEP Rating, Test A ASTM D3948
< 0.010 FSII Vol % ASTM D5006
50 - 600 62 Electrical Conductivity @ 22.0°C pS/M ASTM D2624
AE131-0029495Page 1 of 2
(Quantity sample represents will also be included)
EXAMPLE
Report of Analysis Laboratory Report ID
Job No.
Client Reference
Sample Received Condition : Good (Seal Intact)
None Seal Number :
Sampling Method Not Applicable :
Remarks :**MSEP not meeting the specification.
The information contained herein is based on laboratory tests and observations performed by Intertek. The sample was submitted by client solely for testing. Intertek disclaims any and all liability for damage or injury which might result from the use of the information contained herein, and nothing contained herein shall constitute a guarantee, warranty on representation by Intertek with respect to the accuracy of the information, the sample, product or item described, or its suitability for use for any specific purpose.
This report shall not be reproduced except in full, without approval of the laboratory.
Date: 04 December 2016 Signed:
, Supervisor
AE131-0029495Page 2 of 2
EXAMPLE
File details come from the government source that posted it. Updated .