A031 - MHE Corrosion Control Program.pdf

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

WASH DATE VEHICLE or MHE TYPE VEHICLE or MHE BRAND/MODEL VEH/MHE ID # LOCATION OF WASH METHOD OF WASH WASHER NAME VERIFIED BY NAME

Submit NLT 30 calendar days prior to the end of the phase-in period a maintenance program that details the Contractor's methodology and processes for executing a MHE Corrosion Control Plan for good fleet management practices IAW PWS Paragraph C-3.6.5N. Shall be submitted when the Contractor updates or revises the MHE Corrosion Maintenance Plan within 30 calendar days of the change.

The Contractor shall establish and execute a MHE corrosion control program The Corrosion Control Program should incorporate at a minimum:

1. Weekly wash down schedule for all equipment exposed to outside corrosive weather conditions recorded IAW the attached log.

2. Monthly inspection for rust and damaged paint.

3. Process/procedures for scheduling equipment for corrosion control (e.g., sand blasting/painting).

Block 7 - Inspection and acceptance requirements:

The COR will review and accept the MHE Corrosion Control Plan and updates after coordination with Installation Support Equipment Office and J-3 Depot Operations review and comments.

Block 14 - Distribution - Contractor to submit original to Contract Specialist and copy to the COR.