Snap_Clad__Wood__HipRidge.pdf
PDF 443 KB Posted
- Attached to
- Honokaa State Office Building Roof Repairs
- Solicitation number
- B26003380
- Issued by
- Hawaii County, Hawaii
About this file
This is a technical specification document for Snap-Clad metal roofing panels related to the Honokaa State Office Building Roof Repairs project managed by Hawaii's Department of Accounting and General Services (DAGS), Central Services Division. The document provides detailed installation instructions and specifications for hip and ridge flashing applications using Snap-Clad panels over a wood substrate. The specification outlines the required components, including Snap-Clad clips with #10-13 GP fasteners positioned no more than 8 inches from Z-closures, 3/4-inch turn-up PAC-CLAD HT underlayment, sealant application points, and #10-13 x 1-inch GP fasteners for Z-closure details. The document was effective as of January 3, 2023, and is provided by Petersen Aluminum Corporation with multiple regional offices listed for contact and support.
The specification document emphasizes critical installation requirements including self-tapping pancake head trim fasteners installed in a staggered pattern, clip fasteners that must penetrate the wood substrate by a minimum thread length of 5/8 inch, and fastener spacing that varies based on project-specific loads and local building codes. The detail drawing is presented at a scale of 3 inches equals 1 foot and is noted as illustrative only, with acknowledgment that actual project details may vary. The document serves as a technical reference for bidders submitting proposals for the roof repair work, which includes furnishing all labor, materials, equipment, and supervision necessary to install either the Snap-Clad metal roofing overlay system or an alternative TPO membrane overlay system.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SNAP-CLAD PANEL
SNAP-CLAD CLIP
W/ 2- #10-13 GP FASTENERS
(MAX. 8" FROM "Z"CLOSURE)
HIP/RIDGE FLASHING
WITH "Z" CLOSURES3/4" TURN-UP
PAC-CLAD HT
UNDERLAYMENT
(HIGH TEMP)
SEALANT (AT VERTICAL
LEG & UNDER "Z"CLOSURE)
#10-13 x 1" GP FASTENER
(SEE "Z"CLOSURE DETAIL)
WOOD SUBSTRATE
Z-CLOSURE
1"
1"
8"
HIP/RIDGE
6"
1"
6"
1"
PETERSEN ALUMINUM CORPORATION - PAC-CLAD.COM
HQ: 1005 Tonne Road Elk Grove Village, IL 60007
P: 800-PAC-CLAD
F: 800-722-7150
9060 Junction Drive Annapolis Junction, MD 20701 P: 800-344-1400 F: 301-953-7627
10551 PAC Road Tyler, TX 75707 P: 800-441-8661 F: 903-581-8592
SALES@PETERSENMAIL.COM
102 Northpoint Parkway Acworth, GA 30102 P: 800-272-4482 F: 770-420-2533
1800 S. 7th Ave., Suite 130 Phoenix, AZ 85007 P: 833-750-1935 F: 602-254-6504
9817 233rd Ave. E, Suite A Bonney Lake, WA 98391 P: 253-501-2450 F: N/A
SNAP CLAD - WOOD SUBSTRATE DETAILS
HIP / RIDGE
SUBJECT TO CHANGE WITHOUT NOTICE
EFFECTIVE DATE: 01-03-2023
0 1 2 3 4 5 6
SCALE: 3" = 1'-0"
FLASHINGS
SNAP CLAD
in
DISCLAIMER: DETAIL SHOWN FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PROJECT DETAIL MAY VARY
KEYNOTES:
· TRIM FASTENERS ARE SELF-TAPPING PANCAKE HEAD
AND MUST BE INSTALLED IN A STAGGERED PATTERN
· CLIP FASTENERS MUST PENETRATE WOOD SUBSTRATE
BY 5/8" MINIMUM THREAD LENGTH
· FASTENER SPACING VARIES BASED ON PROJECT
SPECIFIC LOADS AND/OR LOCAL BUILDING CODES
| Sheets and Views |
| Snap Clad - Wood - Hip-Ridge-DETAIL TITLE BLOCK |
File details come from the government source that posted it. Updated .