9554_en_HPX_Fasteners_and_PIRANHA_Plates_Product_Data_Sheet.pdf
PDF 108 KB Posted
- Attached to
- Honokaa State Office Building Roof Repairs
- Solicitation number
- B26003380
- Issued by
- Hawaii County, Hawaii
About this file
This is a product data sheet for HP-X Fasteners and PIRANHA Plates manufactured by Carlisle, designed for use in roofing applications, specifically related to the Honokaa State Office Building Roof Repairs project solicited by Hawaii's Department of Accounting and General Services (DAGS), Central Services Division. The HP-X Fasteners are #15 steel-threaded fasteners engineered to secure mechanically fastened Sure-Weld TPO and Sure-Flex PVC roofing systems to 20- and 22-gauge steel decks or minimum 1.5-inch CDX plywood decks. The PIRANHA Plates are 2.375-inch diameter, 20-gauge steel plates featuring 12 barbs designed to increase slip resistance of the membrane during uplift conditions. Installation requires no pre-drilling for steel and wood decks; fasteners are installed using a standard clutch drive electric screw gun operating at 0-2500 rpm perpendicular to the top flutes of the steel deck. Each bucket includes one #3 Phillips screwdriver bit.
The fasteners feature 12 threads per inch for enhanced back-out resistance and a mini drill-point design that maintains contact between the deck and the fastener's minor diameter. The black epoxy electro-deposition coating provides superior corrosion resistance, exceeding FM 4470 corrosion testing standards with less than 15 percent red rust after 15 cycles in the Kesternich cabinet. Typical pull-out values are 710 pounds-force for 22-gauge steel decks and 375 pounds-force for wood decks, with minimum penetration of 0.75 inches for steel and 1 inch for wood, and maximum penetration of 4 inches for both deck types. Typical static back-out resistance is 15 inch-pounds, with typical drill time of 1.5 seconds into steel decks.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
E X P E R I E N C E T H E C A R L I S L E D I F F E R E N C E
HP-X Fasteners and PIRANHA™ Plates
Overview
Carlisle’s HP-X Fasteners are used with PIRANHA Fastening Plates to secure mechanically fastened Sure-Weld® TPO and Sure-Flex™ PVC roofi ng systems to 20- and 22-gauge steel decks or minimum 15⁄32" CDX plywood decks. HP-X Fasteners are #15 steel-threaded fasteners that offer excellent driving and pull-out performance and outstanding resistance to back-out and corrosion. PIRANHA Plates are 2 3⁄8"-diameter, 20-gauge steel plates with 12 barbs that provide increased slip resistance of membrane during uplift conditions.
Features and Benefi ts
» One #3 Phillips screwdriver bit is included in each bucket
» 12 threads per inch increase thread engagement and provide additional back-out resistance
» Mini drill-point design cuts a hole in the steel deck, maintaining contact between the deck and the minor diameter of the fastener for increased back-out resistance
» Black epoxy electro-deposition coating provides excellent corrosion resistance, surpassing the FM 4470 corrosion test of less than 15% red rust after 15 cycles in the Kesternich cabinet
Installation
1. No pre-drilling is necessary for steel and wood decks. Simply insert the HP-X Fastener through the PIRANHA Plate and install with a standard clutch drive electric screw gun (0-2500 rpm). Optimal fastener performance is achieved when the fastener is installed perpendicular to and into the top fl utes of the steel deck.
Review Carlisle specifi cations and details for complete installation information.
Precautions
» Eye protection is recommended during installation.
» Use care to avoid over-torqueing the fastener.
Typical Properties and Characteristics
Steel Deck
(20- or 22-gauge)
Wood Deck
(15⁄32" CDX Plywood)
Typical Pull-out Value 710 lbf (3158N) 22-ga. 375 lbf (1668 N)
Minimum Penetration ¾" (19 mm) 1" (25 mm)
Maximum Penetration 4" (100 mm) 4" (100 mm)
Typical Static Back-out 15 in lbs (1.7N-m) N/A
Typical Drill Time 1.5 seconds N/A
Typical properties and characteristics are based on samples tested and are not guaranteed for all samples of this product. This data and information is intended as a guide and does not refl ect the specifi cation range for any particular property of this product.
800-479-6832 | P.O. Box 7000 | Carlisle, PA 17013 | Fax: 717-245-7053 | www.carlislesyntec.com
05.12.17 © 2017 Carlisle.
REPRINT CODE: 600210 - “HP-X Fasteners and Piranha Plate PDS”
Carlisle, PIRANHA, Sure-Weld, and Sure-Flex are trademarks of Carlisle.
File details come from the government source that posted it. Updated .