SHT_919395_Preliminary_Window_Door_Schedule_20261009.pdf
PDF 157 KB Posted
- Solicitation number
- 39372
- Issued by
- Middlesex County, Connecticut
About this file
This is a Preliminary Window and Door Schedule prepared by Sharon Housing Trust, Inc. for residential renovation work at three properties (91, 93, and 95 North Main Street) in Sharon, Connecticut. The schedule specifies 85 total windows to be installed across the three buildings, broken down as follows: Building 91 requires 28 windows, Building 93 requires 29 windows, and Building 95 requires 28 windows. Window types include 70 double-hung units, 1 fixed octagon, 1 casement pair (mulled assembly), 1 awning unit, and 12 fixed basement windows. The windows are primarily Andersen 100 Series units, with 13 units specified as Andersen E-Series or 500 Series for street-facing elevations. The schedule also lists 7 doors total: six prehung fiberglass apartment front entry doors (4-panel Shaker style with insulated composite frames) at Buildings 91, 93, and 95, and one basement door (flush, unglazed galvanized steel) at Building 95. All windows are full-frame, new-construction-style with rough opening dimensions ranging from 24" × 30" to 36" × 60" (or approximate dimensions for basement units). The schedule is marked preliminary, requiring contractors to verify all sizes and quantities in the field before ordering. Bids for the complete siding, windows, doors, trim, and paint scope were due November 6, 2026, with a mandatory site walk conducted on October 20, 2026.
The document emphasizes that window material costs are covered under a separate window allowance in the Invitation to Bid, while doors are included in the fixed-price Base Bid. Contractors are responsible for matching each scheduled unit to its corresponding location on elevation drawings and confirming final product selection, quantities by series, colors, and hardware with SHT before ordering. Special attention is required for sleeping-room windows, which must comply with Connecticut State Building Code emergency escape and rescue opening requirements. The schedule notes that where scheduled units are unavailable in the specified product lines (such as the octagon, awning, or basement units), SHT will select equivalent units. Building 93 reflects modifications documented on the project drawings, including a new window at a former door location and the elimination of two scheduled windows. Contractors should note that certain items are excluded from this scope, including rear doors and the Bilco door at Building 93, which are covered under an Add Alternate Item.
View the file
Other files
Show all 29
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PRELIMINARY WINDOW AND DOOR SCHEDULE
Sharon Homes – 91, 93, 95 North Main Street, Sharon, CT 06069
Owner: Sharon Housing Trust, Inc. | Attachment to the Invitation to Bid
PRELIMINARY – CONTRACTOR TO VERIFY ALL SIZES AND QUANTITIES IN THE FIELD BEFORE ORDERING.
No. Building Location (per supplier field count)
Qty Unit Type Rough Opening (W x H)
Series Notes
1 91 Front 7 Double-hung 28" x 48" Andersen 100 Series
2 91 Front 1 Fixed octagon Match existing (approx.
24" x 24")
Andersen 100 Series Existing octagon to remain octagon. Replace in kind;
do not substitute a square unit.
3 91 Street Right 5 Double-hung 30-1/4" x 48" Andersen E-Series / 500 Series
4 91 Left Side 2 Double-hung 30-1/4" x 48" Andersen 100 Series
5 91 Left Side 2 Double-hung 28" x 48" Andersen 100 Series
6 91 South / Back 1 Double-hung 32-1/4" x 48" Andersen 100 Series
7 91 South / Back 4 Double-hung 28" x 48" Andersen 100 Series
8 93 Front 4 Double-hung 32-1/4" x 60" Andersen 100 Series Includes new window at former door D-1 (Building Mod B). Excludes eliminated W-103 (Building Mod E).
9 93 Front 3 Double-hung 32-1/4" x 56" Andersen 100 Series
10 93 Front (attic) 1 Double-hung 34-1/4" x 48" Andersen 100 Series
11 93 Front 1 Double-hung 30-1/4" x 36" Andersen 100 Series
12 93 Street 7 Double-hung 32-1/4" x 60" Andersen E-Series / 500 Series
Excludes eliminated W-104 (Building Mod E).
13 93 Street (attic) 1 Double-hung 32-1/4" x 36" Andersen E-Series / 500 Series
14 93 Left Side 4 Double-hung 32-1/4" x 60" Andersen 100 Series
15 93 Left Side 2 Double-hung 32-1/4" x 56" Andersen 100 Series
16 93 South (attic) 1 Double-hung 32-1/4" x 36" Andersen 100 Series
17 93 South 1 Casement pair (2-wide, mulled)
36" x 35-5/8" overall Andersen 100 Series Existing casements replaced in kind. Counted as one mulled assembly.
18 93 South Side 3 Double-hung 32-1/4" x 56" Andersen 100 Series
19 95 Left Side 3 Double-hung 30-1/4" x 60" Per Note 2
20 95 Left Side 3 Double-hung 32-1/4" x 48" Per Note 2
21 95 Front 3 Double-hung 32-1/4" x 56" Per Note 2
22 95 Front 4 Double-hung 28" x 54" Per Note 2
23 95 Right Side 4 Double-hung 30-1/4" x 56" Per Note 2
24 95 Right Side 1 Awning 30" x 16" Per Note 2 Verify minimum unit height
No. Building Location (per supplier field count)
Qty Unit Type Rough Opening (W x H)
Series Notes available in selected product line.
25 95 Rear Side 2 Double-hung 32-1/4" x 56" Per Note 2
26 95 Rear Side 2 Double-hung 32-1/4" x 40" Per Note 2
27 95 Rear Side 1 Double-hung 24" x 30" Per Note 2
28 91 Basement 6 Fixed (basement) 3'-7" x 12" (approx.) Andersen 100 Series Field-verify. Confirm product minimum height;
see Note 5.
29 93 Basement 1 Fixed (basement) 3'-7" x 12" (approx.) Andersen 100 Series Field-verify. See note for 91 basement units.
30 95 Basement 5 Fixed (basement) 3'-7" x 12" (approx.) Andersen 100 Series Field-verify. See note for 91 basement units.
TOTAL 85
WINDOW SUMMARY
Units by building 91: 28 | 93: 29 | 95: 28 | Total: 85 Units by series E-Series / 500 Series (91, 93 street-facing): 13 | 100 Series: 49 | 95 above grade, series per Note 2: 23 Units by type Double-hung: 70 | Fixed octagon: 1 | Casement pair (2-wide, mulled): 1 | Awning: 1 | Fixed (basement): 12
WINDOW NOTES
1. Above-grade quantities and rough openings are from a supplier field count and measurement taken in March 2026. Basement window sizes are approximate and must be field-verified. Location labels are the supplier’s and do not necessarily match the elevation drawings.
The awarded Contractor shall match each unit in this schedule to its window on the elevation drawings before ordering.
2. Street-facing elevation: the elevation of each building facing North Main Street, per the key plan on Sheet T-001. Windows on this elevation: wood interior, extruded aluminum-clad exterior – Andersen E-Series or Andersen 500 Series. All other elevations, and all basement windows: Andersen 100 Series. At 95, the supplier’s location labels do not identify the street-facing elevation; the Contractor shall assign the series when matching units to the elevations.
3. Lite patterns: per the elevation drawings. Grilles: simulated divided lites. Lite patterns vary by window; do not assume a single pattern.
4. All units: full-frame, new-construction-style windows (not insert/replacement windows), using integral installation flanges where provided by the selected window product. Rough openings shall not be enlarged. A unit may be up to 1 inch smaller than the rough opening in height or width only.
5. Window products are selected by SHT at ordering under the window allowance. Where a scheduled unit is not available in the named product line (for example, the octagon, awning, or basement units), SHT will select an equivalent unit. Bidders shall price installation of the units as scheduled.
6. Sleeping-room windows: each sleeping room shall have at least one window complying with the emergency escape and rescue opening requirements of the Connecticut State Building Code, or with the code’s provisions for replacement windows where applicable. The
Contractor shall verify each sleeping-room window before ordering and notify SHT in writing where a scheduled unit would not comply;
SHT will direct the unit type.
7. Building Modifications at 93 (Sheet A-201): quantities reflect the new window at former door D-1 (Mod B) and the elimination of W-103 and W-104 (Mod E).
8. Unit sizes shown are rough openings. Standard manufacturer sizes are used where they fit the opening; custom sizes elsewhere. Final unit sizes are the Contractor’s responsibility.
9. Final product selection, quantities by series, colors, and hardware shall be confirmed with SHT before ordering. Window material cost is covered by the window allowance in the Invitation to Bid.
DOOR SCHEDULE
No. Building Tag Location Door Type Size (W x H) Hardware Fire
Rating Notes
1 91 D-1 Apartment front entry
Prehung fiberglass, smooth skin, 4-panel Shaker, insulated core, composite frame, adjustable sill
Field-verify; fit existing RO
ANSI/BHMA Grade 2 entry lockset + single-cylinder deadbolt
None
2 91 D-2 Apartment front entry
Prehung fiberglass, smooth skin, 4-panel Shaker, insulated core, composite frame, adjustable sill
Field-verify; fit existing RO
ANSI/BHMA Grade 2 entry lockset + single-cylinder deadbolt
None
3 93 D-2 Apartment front entry
Prehung fiberglass, smooth skin, 4-panel Shaker, insulated core, composite frame, adjustable sill
Field-verify; fit existing RO
ANSI/BHMA Grade 2 entry lockset + single-cylinder deadbolt
None
4 93 D-3 Apartment front entry
Prehung fiberglass, smooth skin, 4-panel Shaker, insulated core, composite frame, adjustable sill
Field-verify; fit existing RO
ANSI/BHMA Grade 2 entry lockset + single-cylinder deadbolt
None
5 95 D-1 Apartment front entry
Prehung fiberglass, smooth skin, 4-panel Shaker, insulated core, composite frame, adjustable sill
Field-verify; fit existing RO
ANSI/BHMA Grade 2 entry lockset + single-cylinder deadbolt
None
6 95 D-2 Apartment front entry
Prehung fiberglass, smooth skin, 4-panel Shaker, insulated core, composite frame, adjustable sill
Field-verify; fit existing RO
ANSI/BHMA Grade 2 entry lockset + single-cylinder deadbolt
None
7 95 — Basement (partial height)
Flush, unglazed, insulated galvanized steel door in galvanized steel frame
Approx. 3'-0" x 4'-0" (custom; field-verify)
Keyed lockset None Replaces existing partial-height basement door.
TOTAL 7 doors
DOOR NOTES
1. Door tags are per the elevation drawings (Sheets A-200 through A-202). All scheduled doors open directly to the exterior.
2. Fire rating: none. No door in this scope is required to be fire rated.
3. Basis of design for front doors: Therma-Tru Smooth-Star Shaker, or approved equal. Size units to fit the existing rough openings without enlarging them. Handing and swing to match existing unless directed otherwise by SHT.
4. Not included: door D-1 at 93 North Main Street (replaced by a window under Building Modification B); rear doors D-4 and D-5; the Bilco door at 93 North Main Street (Add Alternate Item B).
5. Finish color and keying as directed by SHT. Doors are included in the fixed-price Base Bid, not the window allowance. See the Invitation to Bid for installation, flashing, trim, and painting requirements.
File details come from the government source that posted it. Updated .