24127.003 91-95 North Main Street Sharon CT ACM OandM Plan.pdf
PDF 1 MB Posted
- Solicitation number
- 39372
- Issued by
- Middlesex County, Connecticut
About this file
This document is an Operations and Maintenance Plan (O&M Plan) for asbestos-containing materials (ACM) at three residential properties—91, 93, and 95 North Main Street in Sharon, Connecticut—owned and managed by the Sharon Housing Trust. The O&M Plan provides comprehensive guidance for managing ACM in place until permanent removal, establishing procedures to minimize occupant exposure to airborne asbestos fibers through notification protocols, surveillance programs, work control systems, and emergency response procedures. The plan is based on EPA guidelines ("Green Book" and "Purple Book"), OSHA regulations, and Connecticut state requirements. Key management elements include designation of an Asbestos Program Manager (APM) responsible for oversight of all asbestos-related activities; mandatory notification to employees, building occupants, and contractors regarding ACM presence and location; semi-annual surveillance inspections documenting ACM condition; and a work control/permit system requiring APM approval before any activities that may disturb ACM. The plan addresses four management alternatives—abatement/removal, enclosure, encapsulation, and in-place management—and establishes that only licensed Connecticut asbestos abatement contractors may handle, remove, or dispose of ACM.
The O&M Plan specifies detailed procedures for responding to fiber release episodes, distinguishing between minor releases (less than or equal to 3 linear feet or 3 square feet of damaged ACM) and major releases (exceeding those thresholds). Minor releases may be addressed by OSHA Class III trained workers using wet cleaning and HEPA vacuum techniques, while major releases require remediation by licensed asbestos abatement contractors with air monitoring and clearance sampling performed by qualified consultants. The plan mandates annual asbestos awareness training for all relevant Sharon Housing Trust employees and establishes strict policies prohibiting any disturbance of ACM by untrained personnel. A triennial program evaluation is required to assess the overall status of the O&M, review recordkeeping systems, and recommend any necessary updates or modifications. All asbestos-related activities, records, and documentation must be maintained according to specified recordkeeping procedures, with the APM serving as the centralized repository for all ACM survey data, abatement records, and compliance documentation.
View the file
Other files
Show all 29
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
OPERATIONS AND MAINTENANCE
PLAN FOR ASBESTOS
CONTAINING MATERIALS
The Sharon Housing Trust P.O. Box 1168 Sharon, CT
91-95 North Main Street
57 Chestnut Street, Unit 10 Norwalk, CT 06854
The Sharon Housing Trust Operations & Maintenance Plan
91-95 North Main St., Sharon, CT
TABLE OF CONTENTS
1. INTRODUCTION
2. ASBESTOS BACKGROUND AND REGULATORY REQUIREMENTS
3. O&M ORGANIZATIONAL STRUCTURE
4. ASBESTOS MANAGEMENT ALTERNATIVES
5. ACM NOTIFICATION PROCEDURES
6. CONTROL OF WORK DISTURBING ACM
7. LOCATION ASBESTOS SURVEY DATA
8. SURVEILLANCE PROGRAM
9. FIBER RELEASE EPISODES
10. PLANNED ACM DISTURBANCE ACTIVITIES
11. EMPLOYEE TRAINING
12. WORKER PROTECTION
13. RECORD KEEPING
14. PERIODIC EVALUATION OF THE O&M PROGRAM
APPENDICES:
A. Glossary of Terms
B. Big East Environmental Hazmat Survey Report Oct. 2023
1. Introduction
A. GENERAL
SUBJECT SITE: 91-95 North Main Street Sharon, CT
The Site contains three two-family residential structures addressed at 91 North Main Street, 93 North Main Street, & 95 North Main Street
The Asbestos Operations and Maintenance Plan (O&M) is a formulated plan to manage asbestos-containing materials (ACM) within the Subject Site located at 91-95 North Main Street Sharon, CT until they are permanently removed. O&M plans are designed so that ACM is managed and maintained in a good condition until it is removed from the building and if an accidental disturbance or asbestos fiber release occurs, it provides guidance on the proper procedures to effectively respond to those situations.
Current EPA recommendations state that existing ACM be pro-actively managed in place rather than trying remove all ACM. Through EPA’s research, the effective management of ACM in-place is the most cost-effective and beneficial ACM management option than removal, unless the ACM is damaged or the potential for exposure to airborne asbestos fibers is likely.
This plan has been developed in an effort to minimize and eliminate, to the extent practicable, building occupants’ exposure to airborne asbestos. By implementing a well-organized notification and training program for all appropriate staff and building occupants, and developing a procedure manual for outlining emergency procedures, surveillance/monitoring, testing and record keeping, can effectively minimize and eliminate building occupant exposures to airborne asbestos.
It is understood that, in general, 91-95 North Main Street, Sharon, CT requires that maintenance, renovation and demolition activities, as well as other activities that will disturb ACM, will not be performed by building occupants or Sharon Housing Trust employees, but only by Asbestos Abatement
Contractors properly licensed in the State of Connecticut. In addition, any responses to ACM disturbances or damaged ACM will be performed by an outside Asbestos Abatement Contractor.
As a result, this O&M is not considered to be a hands-on type O&M for Sharon Housing Trust employees or other building occupants or outside contractors/vendors to handle, remove, dispose, clean-up, or otherwise disturb and/or impact ACM unless they are specifically qualified, trained, and/or licensed as asbestos professionals in the State of Connecticut and have written permission from the Asbestos
Program Manager (APM).
It is the Sharon Housing Trust policy that no employee, or outside contractor/vendor impact or disturb ACM unless they are specifically qualified, trained, and/or licensed as an asbestos professional in the state of Connecticut and that the APM has provided written approval for that work in accordance with this O&M.
This O&M plan is based upon the following Environmental Protection Agency (EPA) published guidelines:
• Managing Asbestos In Place: A Building Owner’s Guide to Operations and Maintenance Programs for Asbestos-Containing Materials, EPA Publication # 20T-2003, dated July, 1990 (a.k.a “Green
Book”); and
• Guidance for Controlling Asbestos-Containing Materials in Buildings, EPA Publication #560/5-85-024, dated June 1985 (a.k.a. “Purple Book”)
It is also based upon compliance with Occupational Safety and Health Administration (OSHA), state, and local applicable asbestos regulations.
B. O&M OBJECTIVES
The main objective of the O&M is to minimize and eliminate to the extent practical exposure of all building occupants to airborne asbestos. To accomplish this, the O&M includes training and guidance to:
• Maintain ACM in good condition;
• Proper cleanup of asbestos fibers that may have been released;
• Prevent further asbestos fiber releases;
• Proper removal of ACM by appropriately trained and qualified persons in accordance with applicable EPA, OSHA, state, and local regulations; and
• Monitor the condition of ACM being managed in-place.
Through the implementation of this O&M plan, the Sharon Housing Trust can accomplish and document that the above-mentioned objectives are met.
C. O&M ELEMENTS
A successful O&M will have the following elements:
• Notification – A program to tell appropriate Sharon Housing Trust employees, building occupants, and contractors/vendors regarding the presence, location, and quantity of ACM at the location and how and why to avoid disturbing the ACM.
• Surveillance – Routine periodic surveillance to observe and document any changes to ACM condition that is being managed in place.
• Controls – Work control/permit system to monitor and control activities which might disturb ACM
• Work Practices – Specialized work practices and engineering controls to be used when responding to a fiber release.
• Recordkeeping – An organized system of documenting and retaining records regarding ACM
• Worker Protection – Specialized equipment and programs to protect applicable persons who perform work that disturbs or may disturb ACM. Includes items such as medical monitoring and exams and respiratory protection.
• Training – Specific staff shall be appropriately trained in regards to this O&M and any assigned job duties where ACM will or may be disturbed
D. ASBESTOS SURVEY DATA
Asbestos survey data for the location is maintained by the APM. The location may have had several surveys and abatement actions performed over the years and the APM is the designated person to go to for anyone who needs to know if and where ACM may be present at the location.
Prior to disturbance of any building materials, the APM should be contacted and consulted regarding the presence, location, and quantity of ACM.
For the purposes of this specific O&M, ACM are defined as any one of the following:
• Any material that has been sampled by an EPA accredited inspector and certified in the
State of Connecticut as an asbestos inspector and through appropriate laboratory analysis, contains one percent or greater (≥1%) asbestos.
• Materials suspected to be asbestos-containing (i.e. suspect or assumed ACM) and that have not been definitively determined not to be ACM by an EPA accredited inspector and certified in the State of Connecticut in accordance with EPA and Occupational Safety and
Health Administration (OSHA) asbestos regulations;
• Materials required by OSHA regulations to be presumed as asbestos-containing (i.e.
Presumed ACM or PACM) and that have not been definitively determined not to be ACM by an EPA accredited inspector in accordance with EPA and OSHA asbestos regulations. PACM includes any Thermal System Insulation (TSI) (e.g. pipe insulation, boiler insulation, HVAC insulation, etc.) or Surfacing Material (e.g. any sprayed-on or troweled-on material such as fireproofing, textured plasters, acoustical treatments, etc.) that has been installed prior to
January 1, 1981.
Below is an example list of materials that are known to be suspect ACM compiled by the EPA and was obtained from the internet at: http://www.epa.gov/Region6/6pd/asbestos/asbmatl.htm
Cement Pipes Elevator Brake Shoes
Cement Wallboard HVAC Duct Insulation
Cement Siding Boiler Insulation
Asphalt Floor Tile Breaching Insulation
Vinyl Floor Tile Ductwork Flexible Fabric Connections
Vinyl Sheet Flooring Cooling Towers
Flooring Backing Pipe Insulation (corrugated air-cell, block, etc.)
Construction Mastics (floor tile, carpet, ceiling tile) Heating and Electrical Ducts
Acoustical Plaster Electrical Panel Partitions
Decorative Plaster Electrical Cloth
Textured Paints/Coatings Electric Wiring Insulation
Ceiling Tiles and Lay-in Panels Chalkboards
Spray-Applied Insulation Roofing Shingles
Blown-in Insulation Roofing Felt
Fireproofing Materials Base Flashing
Taping Compounds (thermal) Thermal Paper Products
Packing Materials (for wall/floor penetrations) Fire Doors
High Temperature Gaskets Caulking/Putties
Laboratory Hoods/Table Tops Adhesives
Laboratory Gloves Wallboard
Fire Blankets Joint Compounds
Fire Curtains Vinyl Wall Coverings
Elevator Equipment Panels Spackling Compounds
Please note that the above list of suspect ACM is not representative of some or all of the materials present at 91-95 North Main Street, Sharon, CT. In addition, this list is NOT all-inclusive in regards to all known ACM in the United States or world. The EPA has reported that there are over 3,000 different types of materials that were manufactured with asbestos as an additive. This list is intended to be used as a generalized list to educate employees and anyone else associated with the facility about what types of materials may contain asbestos.
E. ABATEMENT ACTIVITIES
The APM maintains all response action records, including fiber release episodes, small-scale, short duration work (i.e. OSHA Class III work) and full-scale removal/abatement. Full-scale removal of ACM and small-scale, short duration removal actions may have taken place at the location.
Prior to any disturbance of building materials, the APM should be contacted and consulted regarding the presence, location, and quantity of ACM so that ACM is not accidentally disturbed.
http://www.epa.gov/Region6/6pd/asbestos/asbmatl.htm
F. ACM HAZARD ASSESSMENT
The EPA has developed standardized procedures for assessing the physical condition of ACM as well as the potential hazard assessment of ACM based upon the conditions documented by the inspector. The first step in the asbestos hazard assessment is to determine the friability and condition of the identified
ACM based upon the inspector’s observations and documentation. Materials are either friable or non-friable. Friable materials are those that, when dry, can be crumbled, pulverized, or otherwise reduced to powder by hand pressure. The condition of the materials are then determined as either “significantly damaged”, “damaged”, or “good/intact” condition.
The second step in the asbestos hazard assessment is to determine the potential for disturbance of the
ACM. There are three basic types of disturbance we consider: air erosion, vibration, and contact. Low potential for contact is generally characterized as occupants working in the vicinity of the ACM less than once per month or ACM is visible, but not within reach of occupants. Moderate potential for contact is generally characterized as occupants working in the vicinity of ACM from once a week to once a month and the ACM is in a room that is accessible to occupants. See the figure below.
The next step in asbestos hazard assessment is to combine the current material condition with the potential and type of disturbance, to determine an overall hazard ranking. Any material that has been determined to be significantly damaged is automatically assigned the highest hazard ranking of #1, regardless of potential for disturbance. Damaged ACM is then ranked from the second highest hazard ranking (#2) to ranking #4, depending upon the potential for significant damage (#2), potential for damage (#3), and low potential for damage (#4). ACM in good condition is then ranked from the fifth highest hazard ranking (#5) to the lowest hazard ranking (#7), depending upon the potential for significant damage (#5), potential for damage (#6), and low potential for damage (#7). See figure below.
2. Asbestos Background and Regulatory Requirements
A. ASBESTOS BACKGROUND INFORMATION
Asbestos is a generic term used to describe a group of six naturally occurring crystalline fibrous minerals.
Asbestos has been used extensively throughout the world in the textile, insulation and building
Industries. It was used extensively for so long as a material additive because it is readily available from vast deposits in the earth, and it has great qualities such as: thermal stability, a high degree of tensile strength, resistance to corrosion, and poor electrical conductor. It has been used for many years as an additive to materials such as fireproofing, building system insulation materials, resilient flooring materials, mastics/adhesives/glues, patching compounds, brake and clutch linings, and as reinforcement for plaster binders in building products. Due to the wide range of materials in which it can be utilized, millions of tons of asbestos have been mined since the turn of the century.
Asbestos has been used for centuries, but the use of asbestos fibers began on a true industrial scale in the 1800’s in Italy with the development of asbestos textiles. In the U.S., asbestos was used as early as
1870 for insulation for applications such as ship building. The real commercial use of asbestos in the U.S.
increased during the early 1900s and peaked in the period from World War II into the early 1970s.
During this time, the sprayed-on form of asbestos became fairly common, but during the 1960s and
1970s, health problems associated with long-term heavy exposure to airborne asbestos fibers led to a large reduction in the use of asbestos.
In 1973, the EPA began banning the installation and use of many “high risk” uses of asbestos including spray-on fireproofing, insulation on pipes, boilers, and HVAC equipment. In addition, in 1978 the
Consumer Product Safety Commission banned the use of asbestos-containing joint compound, also known as spackle or patching compound.
It is important to know and understand that surpluses of these materials continued to be used after the date of the EPA bans. So, even though spray-on fireproofing was banned in 1973, you could have a building constructed in 1978 that could still potentially contain asbestos fireproofing due to a surplus in inventory when the building was constructed. However, not all materials containing asbestos have been banned. Actually, most building materials containing asbestos have NOT been banned in the US. Even though asbestos mining in this country ended in 2002, you can still buy materials in the US with asbestos in them.
Now, all ACMs used in the US are imported, such as floor tiles, roofing sealants and caulking, gaskets, friction materials, and cement products.
B. HEALTH AFFECTS OF ASBESTOS
For many years, it has been known that excessive inhalation of asbestos dust in mining and manufacturing operations can cause a pneumoconiosis condition known as asbestosis. Other diseases that have been linked to asbestos dusts and fiber inhalation include lung cancer, mesothelioma and pleural plaques.
The inhalation of asbestos fibers by workers can cause serious diseases of the lungs and other organs that may not appear until many years after the exposure has occurred. For instance, asbestosis can cause a buildup of scar-like tissue in the lungs and result in loss of lung function that often progresses to disability and death. Asbestos fibers associated with these health risks are too small to be seen with the naked eye, and smokers are at higher risk of developing some asbestos-related diseases.
Significant exposure to any type of asbestos will increase the risk of lung cancer, mesothelioma, and nonmalignant lung and pleural disorders, including asbestosis, pleural plaques, pleural thickening, and pleural effusions.
Diseases from asbestos exposure take a long time to develop. Most cases of lung cancer or asbestosis in asbestos workers occur 15 or more years after initial exposure to asbestos. Tobacco smokers who have been exposed to asbestos have a "far greater-than-additive" risk for lung cancer than do nonsmokers who have been exposed, meaning the risk is greater than the individual risks from asbestos and smoking added together. The time between diagnosis of mesothelioma and the time of initial occupational exposure to asbestos commonly has been 30 years or more.
• When asbestos fibers are inhaled, most fibers are expelled, but some can become lodged in the lungs and remain there throughout life. Fibers can accumulate and cause scarring and inflammation. Enough scarring and inflammation can affect breathing, leading to disease.
• The term “naturally occurring asbestos” refers to the mineral as a natural component of soils or rocks as opposed to asbestos in commercial products, mining or processing operations. Naturally occurring asbestos can be released from rocks or soils by routine human activities, such as construction, or natural weathering processes. If naturally occurring asbestos is not disturbed and fibers are not released into the air, then it is not a health risk.
http://www.atsdr.cdc.gov/asbestos/asbestos/health_effects/#lungcancer http://www.atsdr.cdc.gov/asbestos/asbestos/health_effects/#asbestosis
• People are more likely to experience asbestos-related disorders when they are exposed to high concentrations of asbestos, are exposed for longer periods of time, and/or are exposed more often.
• Exposure to asbestos can increase the likelihood of lung cancer, mesothelioma, and non-malignant lung conditions such as asbestosis (restricted use of the lungs due to retained asbestos fibers) and changes in the pleura (lining of the chest cavity, outside the lung).
• Changes in pleura such as thickening, plaques, calcification, and fluid around the lungs
(pleural effusion) may be early signs of asbestos exposure. These changes can affect breathing more than previously thought. Pleural effusion can be an early warning sign for mesothelioma (cancer of the lining of the lungs).
• Most cases of asbestosis or lung cancer in workers occurred 15 years or more after the person was first exposed to asbestos.
• Most cases of mesothelioma are diagnosed 30 years or more after the first exposure to asbestos.
• Health effects from asbestos exposure may continue to progress even after exposure is stopped.
• Smoking or cigarette smoke, together with exposure to asbestos, greatly increases the likelihood of lung cancer.
C. ASBESTOS REGULATIONS
EPA
The EPA generally has two regulations governing management of asbestos in buildings. One only pertains to primary and secondary public schools in the US and is known as the Asbestos Hazard
Emergency Response Act (AHERA). Since 91-95 North Main Street, Sharon, CT does not fall under the applicability for the AHERA regulation, no further discussion will be necessary on AHERA.
The other EPA regulation that governs asbestos in buildings is the National Emission Standard for
Hazardous Air Pollutants (NESHAP), 40 CFR 61, Subpart M, Section 145. The EPA requires the removal of regulated asbestos-containing materials (RACM) from buildings prior to disturbance by renovation and/or demolition activities to prevent significant public exposure to airborne asbestos fibers during renovation and/or demolition activities. RACM is generally defined as materials, which contain greater than one-percent asbestos and are one of the following:
1. Friable (i.e. when dry, can be reduced to powder by hand pressure).
2. Non-friable materials which have become friable.
3. Category I non-friable materials which have been sanded, ground, cut, or abraded.
4. Category II non-friable materials which are expected to become friable due to the forces expected to act on them during the course of demolition.
A friable asbestos-containing material is defined as any material that contains more than one percent asbestos by weight that hand pressure can crumble, pulverize, or reduce to powder, when dry. The EPA categorizes non-friable materials into two categories. Category I non-friable materials are defined as resilient floor coverings, asphalt-based bituminous roofing materials, packings, construction mastics, and gaskets. Category II non-friable materials include all other non-friable materials such as asbestos cement products, vibration dampeners, etc.
OSHA
Since 1972, the Occupational Safety and Health Administration (OSHA) has regulated asbestos exposure in general industry thereby causing a significant decline in the use of asbestos-containing materials.
OSHA has three regulations that govern asbestos in the occupational environment
• Asbestos in Shipyards (29 CFR 1915.1001)
• Asbestos in General Industry (29 CFR 1910.1001)
• Asbestos in Construction (29 CFR 1926.1101)
The two OSHA asbestos regulations that are applicable to 91-95 North Main Street, Sharon, CT include the Asbestos in General Industry and Asbestos in Construction. These two regulations have a lot of the same requirements, but they differ in that the General Industry regulation covers all occupational exposures to asbestos, except in the construction industry. The Construction Industry regulation is specific to construction work involving asbestos, which includes disturbance of asbestos and ACM.
The OSHA regulations have established certain requirements for employers and building owners:
• Permissible Exposure Limits (PELs) to airborne asbestos
• Exposure monitoring
• Medical surveillance
• Recordkeeping
• Establishing regulated areas with control measures, specific work practices, and personal protective equipment where exposure to asbestos is expected or known to exceed a PEL
• Communication of asbestos hazards
• Classifications of the different hazard levels of disturbing asbestos (Class I – IV activities) and associated required control measures, specific work practices, and personal protective equipment
• Training regarding asbestos
State, County, and City Regulations
States, counties, and/or cities have the right to maintain their own EPA OSHA programs and enforce their own asbestos regulations provided that they are no less stringent than the federal regulations.
The APM shall be familiar with the State of Connecticut, Litchfield County, and/or City of Sharon regulations and aware of the local requirements. The APM should consult with the environmental consultant to verify what state, county, and/or city regulations are relevant for the location.
Examples of state, county, or city specific regulations or requirements include:
• Notification to the state OSHA program in addition to the EPA NESHAP notifications
• Professional licensing for the company and/or individuals providing asbestos-related services such as: worker, supervisor, inspector, management planner, project designer, or project monitor.
• ACM waste disposal requirements
3. O&M ORGANIZATIONAL STRUCTURE
A. EXECUTIVE DECISIONS
Asbestos related matters for 91-95 North Main Street, Sharon, CT will be reviewed and considered by property management. Future asbestos related program management decisions will continue to be made at this level in consultation with the APM, as necessary.
B. ASBESTOS PROGRAM MANAGER (APM)
Property management for 91-95 North Main Street, Sharon, CT will designate the APM for the site. The responsibilities of the APM are numerous, and this person should act as the initial decision-maker on all asbestos-related matters for the buildings they manage. The APM should obtain advice from relevant parties such as the environmental consultants retained by the Sharon Housing Trust, when facing decisions regarding assessing potential fiber releases, determining appropriate response actions, managing surveys and air monitoring, executing abatement projects, etc. The APM is ultimately responsible for overseeing all aspects of the program. These areas include, but are not limited to:
• Notification – Notifying appropriate employees, building occupants, and contractors/vendors regarding the presence, location, and quantity of ACM at the location and how and why to avoid disturbing the ACM.
• Surveillance – Conducting routine periodic surveillance to observe and document any changes to ACM condition that is being managed in place.
• Controls – Controlling all work that may impact building materials by implementing a work control/permit system to monitor and control activities which might disturb ACM.
• Work Practices – Ensuring that specialized work practices and engineering controls are used when responding to a fiber release or other removal activity.
• Recordkeeping – Using an organized system of documenting and retaining records regarding
ACM activities.
• Worker Protection – Ensuring that specialized equipment and programs are used to protect applicable persons who perform work that disturbs or may disturb ACM.
• Training – Ensuring that staff be appropriately trained in regards to this O&M and that they have the proper training for any assigned job duties where ACM will or may be disturbed
The APM is individually responsible for implementation of the overall program, but is encouraged to delegate tasks and duties to others to assist them with effectively implementing the O&M. The APM should be properly trained in asbestos.
The APM shall:
1. Coordinate with legal counsel and upper management regarding overall asbestos policies and O&M implementation.
2. Consult with outside experts and state, local and federal regulatory agencies, on an as-needed basis, regarding any changes in regulations regarding ACM.
3. Consult with outside experts when the solution to an ACM/PACM-related problem lies outside the scope of this plan or beyond their training or expertise.
4. Maintain a record of all known ACM remaining within the facility covered by this program and all work related to ACM. Ensure that copies of all asbestos-related files, documents, and records are maintained in accordance with this plan.
5. Make a copy of this plan, previous reports, and revisions to those reports or this plan available to all employees, building occupants, or contractors/vendors who could reasonably be expected to come in contact with ACM in the performance of their duties.
6. Provide guidance and documents for use in notifying outside contractors of the presence, location, and quantity of ACM at the site and Sharon Housing Trusts’ policy regarding ACM. Notifying outside contractors of the precautions necessary to protect building occupants and themselves from ACM.
7. Provide guidance and documents concerning advising employees who may come into contact with asbestos during their work of the presence, location, and quantity of ACM and the procedures to be followed in performing the work to reduce or eliminate exposures to asbestos.
C. MAINTENANCE AND CUSTODIAL STAFF
These employees are normally quite familiar with the site. Therefore, it is most likely that they may notice a change in status or a change in building material condition within the building should such a change occur.
Also, these employees are most likely to be given the direct responsibility of minimizing the potential for airborne fiber release. They are the key individuals for carrying out a functional O&M.
Therefore, training sessions encompassing mechanisms for controlling exposure as well as surveillance and indications of potential problems should be conducted for these designated employees.
It is the Sharon Housing Trust’s policy that no employee, or outside contractor/vendor impact or disturb ACM unless they are specifically qualified, trained, and/or licensed as an asbestos professional in the state of the location of the work and that the APM has provided written approval for that work in accordance with this O&M.
4. Asbestos Management Alternatives
There are four management alternatives facing the building owners and employers when they become aware of the presence of asbestos in their buildings:
• Abate (remove) the material;
• Encapsulate the material;
• Enclose the material;
• Manage the material in-place under an O&M.
Each of these alternatives has advantages as well as disadvantages. The following paragraphs discuss the advantages and disadvantages of each course of action.
B. ABATEMENT / REMOVAL
The major advantage of removal of the ACM is that it permanently eliminates the source of the hazard.
It ends the potential for exposure and prevents the development of future problems, provided that the removal activities are performed properly in accordance with current federal, state, local regulations.
Therefore, removal of the material is the most conservative solution. The main disadvantage to the removal option is that it is usually the most costly, complicated and time-consuming method. Also, the removed ACM usually must be replaced with a comparable substitute material. Furthermore, improper removal can create an exposure risk where minimal or no exposure risk existed before.
Removal is the most appropriate option, though, when the ACM is significantly damaged and/or there is a high likelihood of disturbance and exposure by building occupants, employees, and/or contractors.
C. ENCLOSURE
Enclosure involves the construction of a solid, physical barrier that is air-tight around the ACM. Carefully constructed airtight enclosures can significantly reduce and may even eliminate release of airborne fibers into the building environment. Enclosure may be impractical because ACM are often applied to the structural frame of the building or located in the air plenum above suspended ceilings. Enclosure of the ACM, while maintaining a functional return air plenum, is often impossible. Enclosing the ACM does not require replacement of the ACM with a comparable substitute material and usually exhibits a lower initial cost than removal. However, since the ACM still remains in the building, implementation of an
O&M still is necessary. Consequently, this alternative frequently has costs comparable to or even higher than removal costs in the long term. In addition, access may be necessary to the enclosed ACM, therefore enclosure may not be an appropriate option.
D. ENCAPSULATION
Encapsulation entails spraying the ACM with an encapsulant (i.e. a sealant) to coat the ACM and bind the asbestos fibers and other material constituents together to reduce the risk of fiber release and increase the ACM’s resistance to damage. The initial cost of encapsulation may be lower than removal, though long term O&M, periodic assessment, monitoring of building activities, and even the reapplication of the sealant can result in an overall cost exceeding that of removal. With encapsulation, the source of the hazard remains in the building and must be considered when planning renovation, demolition or extensive maintenance activities. In addition, encapsulation can make subsequent removal more difficult and hazardous since it creates a hard crusted surface which cannot easily be wetted to facilitate removal of the encapsulated ACM.
E. MANAGE IN-PLACE WITH AN O&M
In many cases, removal of ACM is not warranted or feasible. In these cases, the most suitable alternative to removal is to manage the ACM that is in good condition and has a low likelihood of becoming disturbed by normal building activities under an O&M. The O&M should remain in effect for the facility until all known ACM have been properly removed, the building completely demolished, or building is sold.
F. THE SHARON HOUSING TRUST - GENERAL ACM MANAGEMENT POLICIES
The following items are to be regarded as “policy” by all Sharon Housing Trust employees, building occupants, and outside contractors/vendors working in or occupying the buildings at 91-95 North Main
Street, Sharon, CT:
1. No outside tradesman or contractor or vendor will be permitted to disturb or handle ACM without proper training, licensing and personal protective equipment (PPE) (e.g., respiratory protection). No employee of the Sharon Housing Trust will be permitted to disturb or remove ACM unless they have been specifically trained and have the appropriate equipment and PPE.
2. All employees of the Sharon Housing Trust who could reasonably be expected to come in contact with ACM in the performance of their duties, such as maintenance and custodial workers, shall be notified of the presence, location, and quantity of ACM in their facility and advised to perform their tasks in a manner which will not cause disturbance of ACM. Any work that will disturb ACM shall be communicated to the APM and approved by the APM through the control/work permit system in this O&M.
3. All contractors working at 91-95 North Main Street, Sharon, CT in areas known to have ACM present will be notified and advised to perform their tasks in a manner which will not cause disturbance of
ACM. Any work that will disturb ACM shall be communicated to the APM and approved by the APM through the control/work permit system in this O&M.
4. All asbestos related activities shall be communicated to the APM. No one may disturb ACM without prior approval of the APM. If the APM is unable to deal with a specific issue or event, an appropriately trained outside consultant or contractor will be engaged to do so.
5. The Architect, Engineer or other designer for any construction or remodeling concerning the location shall be notified of the presence, location, and quantity of ACM and advised to design their projects in a manner which causes the least potential for disturbance to ACM. If ACM will be disturbed, it will be properly abated by a licensed asbestos abatement contractor prior to disturbance in accordance with all applicable federal, state, and local regulations and this O&M.
6. No outside contractor (except licensed asbestos abatement contractors) will be permitted to remove ACM. Only trained asbestos abatement workers will be permitted to handle, remove, and dispose ACM. As much as possible, all disturbance and/or impact of ACM shall be performed when building occupants are not present.
7. Sharon Housing Trust employees shall notify the APM as soon as they are aware of any construction activity being performed so that the APM can determine if they have already addressed ACM for that particular project.
8. The APM will review the scope of work of all construction activities affecting the buildings they manage to determine if it will affect ACM. If it appears that ACM will be affected, the APM will ensure appropriately trained contractors and/or consultants are engaged to deal with the ACM. The
APM, in conjunction with the Asbestos Consultant will, if necessary, prepare a scope of work, specifications and/or drawings to enable a licensed Asbestos Abatement Contractor to price the work and perform it properly.
9. The APM or the General Contractor managing the construction project will engage a licensed asbestos abatement contractor to deal with any potential asbestos disturbance safely, prior to beginning normal construction activities.
10. The Asbestos Consultant will be retained to observe the Asbestos Abatement Contractor’s work and perform air monitoring during and after the work to document its effectiveness. Some states, counties, and/or cities may require that an Asbestos Project Monitor be utilized on these projects.
The APM should consult with the Asbestos Consultant to verify when a project monitor would be necessary.
11. Normal building maintenance and custodial cleaning may be performed without special equipment and/or controls as long as ACM (or associated debris) is not disturbed.
5. ACM NOTIFICATION PROCEDURES
All Sharon Housing Trust employees, building occupants, and affected outside agents who perform maintenance activities within the facility should be notified of the presence of asbestos through the use of a written notification system. Written communication is the preferred method as it is easily documented and records maintained.
Persons who could potentially disturb ACM should be made aware of the presence, location, and quantity of ACM by implementing the four methods described below. Maintenance and custodial personnel who may encounter ACM will be required to sign an employee notification form. Visitors, outside agents and contractors who may encounter ACM during their work will be required to sign a similar form. Each of these signed documents will be kept on file as part of the O&M recordkeeping process.
The following four notification procedures are recommended to be implemented to make sure contractors, maintenance personnel and housekeeping do not disturb materials that are suspected, presumed or known to contain asbestos.
1. Standard asbestos warning message on work orders. If standard work orders or work authorizations or purchase orders are issued to outside contractors and vendors, it is recommended that a standard asbestos warning message be printed on each work order, work authorization, or purchase order executed by Sharon Housing Trust about the potential presence of asbestos in the building the work order refers to. The purpose of the asbestos warning message is to make the recipient aware of the presence or potential presence of asbestos in the building the work order is issued for and to instruct them to consult the APM for more information prior to disturbing any building materials. The warning message should also indicate that no ACM shall be installed in the building as part of the re-construction or put-back work.
2. Installation of asbestos warning signs and/or labels. The purpose of the warning signs and/or labels is to notify appropriate persons and prevent accidental access or disturbance to asbestos, including PACM and suspect ACM, by contractors, maintenance workers, housekeeping, etc. The signs and labels are installed in locations such as maintenance, mechanical, electrical, ventilation rooms and janitorial closets for this purpose. The presence of an asbestos warning sign in a building does not mean that there is an asbestos hazard nor is it intended to restrict access to the rooms where they are posted. The purpose of the warning sign is merely to inform the person that they are in an area or in a building that has the potential to contain ACM and to consult with the APM prior to disturbing any building materials.
3. Training of O&M participants. Each participant of the O&M receives asbestos awareness training that is in compliance with OSHA regulations. This training is refreshed annually.
The training also stresses the Sharon Housing Trust policy that no Sharon Housing Trust employee shall knowingly disturb asbestos as part of their normal job duties, unless they are specifically trained. The disturbance of asbestos is only to be performed by properly qualified, trained, and licensed personnel. Participants that receive the asbestos awareness training include:
a. Sharon Housing Trust Property Management
b. APM
c. All maintenance and custodial staff
d. Any other Sharon Housing Trust employee who may disturb or potentially disturb ACM as part of their normal, routine job duties.
NOTE – All outside contractors, vendors, consultants, visitors, etc., i.e. all non- Sharon Housing Trust personnel are required to have asbestos awareness training provided by their own employers. It is NOT
Sharon Housing Trust’s responsibility to provide asbestos awareness training to any non- Sharon
Housing Trust staff. It is Sharon Housing Trust’s responsibility to make these personnel aware of the presence, location, and quantity of ACM in the buildings if these personnel will likely disturb or work near the ACM.
4. Written communication. A formal written communication will generally include information regarding the presence, location, and quantity of known ACM. A formal written communication about the presence of ACM may be provided to certain parties:
a. General employees who may not require Asbestos Awareness training; i.e. Sharon
Housing Trust employees not covered by #3 above.
b. Maintenance and grounds / facilities staff
c. Contractors or vendors performing services at 91-95 North Main Street, Sharon, CT
d. Purchasers or lessees or tenants of 91-95 North Main Street, Sharon, CT
B. GENERAL EMPLOYEE NOTIFICATION
The following notification form is a simple method of conveying the needed information concerning
ACM within the facility. This is only an example. It should be modified to encompass each degree of awareness for administrative, maintenance, custodial and other employee groups. Depending upon the degree of awareness and activities anticipated to be performed, the letters on the following pages would be appropriate for administrative employees or maintenance, custodial and other employee groups which may need to work around ACMs.
EMPLOYEE ASBESTOS NOTIFICATION
Sharon Housing Trust
The buildings located at 91-95 NORTH MAIN STREET, SHARON, CT have an asbestos Operations and Maintenance Plan (O&M) for the facility and is based upon asbestos survey data and historical information regarding the use of asbestos. Asbestos was added extensively in many different building materials used in the construction industry from the mid 1930’s until the mid- 1980’s. In addition, certain specific asbestos building materials can still be used today in the United States. Surveys conducted by the Environmental Protection Agency (EPA) estimate that asbestos-containing materials can be found in over 750,000 buildings, including schools, public building and office buildings in this country.
Based upon asbestos survey results for the site, there is potential for the presence of friable and non-friable asbestos-containing materials (ACM) in various portions of the location. Friable materials are those which can be crumbled, crushed or pulverized using hand pressure. Non-friable materials are those which cannot be crumbled, crushed, or pulverized using hand pressure. The EPA and OSHA have determined that asbestos only presents a potential health hazard when fibers become airborne and are inhaled. The mere presence of ACM in a building does not necessarily present a health hazard.
Specific detailed information regarding the presence, location, and quantity of ACM at the location is maintained by the location Asbestos Program Manager (APM).
Please contact ________________ at ________________, the APM for the location for details regarding ACM at the location. The facility has had an asbestos survey and the APM is the designated person to go to for anyone who needs to know if and where ACM may be present at the location.
Prior to any disturbance of building materials, the APM should be contacted and consulted regarding the presence, location, and quantity of ACM so that ACM is not accidentally disturbed. It is the Sharon Housing Trust’s policy that no employee, building occupant, or outside contractor/vendor impact or disturb ACM unless they are specifically qualified, trained, and/or licensed as an asbestos professional in the state of the location (if applicable) and that the APM has provided written approval for that work in accordance with the O&M. Cleaning and maintenance personnel are taking special precautions and training to properly guard against disturbing ACM.
The O&M enables us to manage ACM at the location without adversely affecting operations and, more importantly, the health and safety of employees, tenants, and other building occupants. The O&M defines specific procedures to be followed at all times regarding ACM. The ACM are periodically inspected and, if an ACM is observed to be in a damaged condition or in a condition that may present a potential health hazard, additional measures or precautions will be taken, if needed, to protect the health of the building occupants.
If you have any questions concerning this matter, please contact me.
Sincerely, Asbestos Program Manager
Contact: ________________________
C. MAINTENANCE/CUSTODIAL EMPLOYEE NOTIFICATION
The following notification form is a standardized statement of acknowledgment regarding being informed of the presence, location, and quantity of ACM. This form can be substituted by documentation of the employee having asbestos awareness training and having that awareness training refreshed annually.
This form should be completed by each maintenance or custodial employee who may encounter the presence of asbestos-containing material.
All other personnel whose work may involve disturbing or working near ACM should also sign such an acknowledgment statement. This form is an example and may be modified to meet your needs. These forms should be retained on file in accordance with company document retention policies and this
O&M’s recordkeeping requirements. Through the use of acknowledgment forms, management is documenting compliance with EPA and OSHA regulations.
MAINTENANCE AND CUSTODIAL ASBESTOS NOTIFICATION FORM
Sharon, CT
DATE: ___________________
RE: Notification of Presence of Asbestos
I acknowledge and understand that I may be working in areas which are known to contain asbestos-containing materials (ACM) and I acknowledge that I have been advised of the dangers inherent in disturbing ACM and being exposed to airborne asbestos.
Based upon asbestos survey results for the location, there is potential for the presence of friable and non-friable asbestos-containing materials (ACM) in various portions of the location. Friable materials are those which can be crumbled, crushed or pulverized using hand pressure. Non-friable materials are those which cannot be crumbled, crushed, or pulverized using hand pressure. The EPA and OSHA have determined that asbestos only presents a potential health hazard when fibers become airborne and are inhaled. The mere presence of ACM in a building does not necessarily present a health hazard.
I acknowledge and understand that:
• Specific detailed information regarding the presence, location, and quantity of ACM at the location is maintained by the location Asbestos Program Manager (APM). The facility has had an asbestos survey and the APM is the designated person to go to for anyone who needs to know if and where ACM may be present at the location.
• Prior to any disturbance of building materials, I will contact the APM and consult them regarding the presence, location, and quantity of ACM so that my work does not disturb ACM and potentially release asbestos fibers.
• I will take all appropriate precautions and planning in order not to disturb ACM as part of my work. If I accidentally disturb ACM, I will immediately stop work, isolate and restrict access to the area, and notify the APM immediately for further guidance.
• It is Sharon Housing Trust’s policy that no employee, building occupant, or outside contractor/vendor impact or disturb ACM unless they are specifically qualified, trained, and/or licensed as an asbestos professional in the state of the location (if applicable) and that the APM has provided written approval for that work in accordance with the O&M.
I agree faithfully to take all precautions necessary and required for me.
Signature _____________________________________________
Name _____________________________________________
Employee ID _____________________________________________
D. VISITOR AND OUTSIDE CONTRACTOR NOTIFICATION
The following form notifies visitors and outside agents, such as contractors, of the presence of ACM.
This is also only an example. It may be modified depending on the intended audience.
However, all persons working in or around a possibly contaminated area must be made aware of the presence of asbestos-containing material. It is highly recommended that they read and sign the notification, which should be retained in accordance with company and this O&M’s document retention policies.
VISITOR AND CONTRACTOR ASBESTOS NOTIFICATION FORM
Sharon, CT
DATE: ____________________
RE: Notification of Presence of Asbestos
I acknowledge and understand that I may be working in areas which are known to contain asbestos-containing materials (ACM) and I acknowledge that I have been advised of the dangers inherent in disturbing ACM and being exposed to airborne asbestos.
Based upon asbestos survey results for the facility, there is potential for the presence of friable and non-friable asbestos-containing materials (ACM) in various portions of the location. Friable materials are those which can be crumbled, crushed or pulverized using hand pressure. Non-friable materials are those which cannot be crumbled, crushed, or pulverized using hand pressure. The EPA and OSHA have determined that asbestos only presents a potential health hazard when fibers become airborne and are inhaled. The mere presence of ACM in a building does not necessarily present a health hazard.
I acknowledge and understand that:
• Specific detailed information regarding the presence, location, and quantity of ACM at the location is maintained by the location Asbestos Program Manager (APM). The location has had an asbestos survey and the APM is the designated person to go to for anyone who needs to know if and where
ACM may be present at the location.
• Prior to any disturbance of building materials, I will contact the APM and consult them regarding the presence, location, and quantity of ACM so that my work does not disturb ACM and potentially release asbestos fibers.
• I will take all appropriate precautions and planning in order not to disturb ACM as part of my work. If
I accidentally disturb ACM, I will immediately stop work, isolate and restrict access to the area, and notify the APM immediately for further guidance.
• It is Sharon Housing Trust’s policy that no outside contractor/vendor impact or disturb ACM unless they are specifically qualified, trained, and/or licensed as an asbestos professional in the state of the location and that the APM has provided written approval for that work in accordance with the O&M.
• I will not perform any work that may disturb any building materials until I have confirmed with the
APM the presence, location, and quantity of ACMs in the areas of my work, received authorization to perform my work from the APM, and that I will not disturb any identified ACM.
I agree faithfully to take all precautions necessary and required of me.
Signature: _________________________________________________ Name: ____________________________________________________ Company Name:…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .