SF242-D025.pdf

Standard Form PDF 49 KB Posted

Attached to
DEMISE - DEploy Material Into Space Experiments
Solicitation number
SF242-D025
Issued by

About this file

SF242-D025: DEMISE - DEploy Material Into Space Experiments

This is a Direct-to-Phase-II (D2P2) solicitation topic from the Air Force Research Laboratory (AFRL) Rocket Cargo Vanguard Program seeking concept exploration, prototype development, sub-scale experiments, and test and evaluation of standardized containerization technology for cargo deployment into space. The objective addresses a critical capability gap: commercial shipping containers cannot survive exoatmospheric conditions, limiting down-mass capacity during earth re-entry. The government seeks technologies enabling containers to maintain payload integrity during prolonged exposure in space and re-entry independently from the launch vehicle after separation in orbit. The program aims to deliver up to 30 tons of cargo globally within tactical timelines in support of Department of Defense logistics missions.

Eligibility requires applicants to have completed a prior "Phase I-type" effort demonstrating feasibility outside the SBIR/STTR Programs, including modeling and simulation, cost-benefit analysis, risk analysis, concept development, and experimentation validating product-market fit with an Air Force stakeholder. Phase II efforts will conduct sub-scale experiments and provide test articles addressing military-unique requirements, with Phase III delivering upgraded analysis, mature prototypes, and a business plan for commercial technology transition. The technology areas encompass Materials and Space Platforms under Advanced Materials, Space Technology, and Sustainment & Logistics modernization priorities. The technology is restricted under ITAR (22 CFR Parts 120-130) and EAR (15 CFR Parts 730-774); offerors must disclose any proposed foreign nationals, their countries of origin, visa/work permit status, and assigned statement of work tasks. No CMMC level requirement applies, and no Technical Point of Contact is designated.

View the file

Other versions and copies of SF 242

File Revision Posted Attached to
SF242-0019.pdf Revision not stated Hydrogenation for defect passivation in (Si)GeSn alloys
SF242-0016.pdf Revision not stated Neuromorphic Camera for Space Domain Awareness
SF242-D026.pdf Revision not stated FLOATS - Floating and Loitering Ocean Advanced Technology Sensing
SF242-0017.pdf Revision not stated Cover glass solutions
SF242-0020.pdf Revision not stated Exploring Proliferated Warfighter Space Architecture (PWSA)
SF242-0015.pdf Revision not stated Programmability of Regional and/or Local Multi-Source PNT for Joint All-Domain Operations
SF242-D027.pdf Revision not stated ROC STAR - ROcket Cargo System Technologies And Research
SF242-D024.pdf Revision not stated ICED-T – Innovative Cargo Exoatmospheric Delivery Technology
SF242-D022.pdf Revision not stated Uncertainty Management for Space Domain Awareness of Non-Standard Threats
SF242-D028.pdf Revision not stated Strategic Advancements in Resilient Space Technologies for PWSA Enhancement
SF242-0018.pdf Revision not stated Neon recovery and reliquefication for low temperature characterization of infrared focal plane arrays
SF242-D023.pdf Revision not stated Small Satellite Swarms for ISR
SF242-D029.pdf Revision not stated Space Based Environmental Monitoring (SBEM)
SF-242.doc Revision not stated : Chilled Water piping Insulation Replacement Houston Air Route Traffic Control Center (ARTCC) Houston, Texas
Show all 14

Who attaches SF 242

Other files

File Type Posted
AF_SBIR_242_PI_DP2.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SF242-D025: DEMISE - DEploy Material Into Space Experiments

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Materials | Space Platforms

MODERNIZATION PRIORITIES:

Advanced Materials | Space Technology | Sustainment & Logistics

KEYWORDS:

Space Container; space environment;

ADDITIONAL INFORMATION

N/A

OBJECTIVE:

This topic seeks to perform concept exploration, prototype development, sub-scale experiments, test and evaluation of technology to standardize containerization of cargo to survive the vacuum of space and deploy material into space.

ITAR:

The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.

DESCRIPTION:

The AFRL Rocket Cargo Vanguard Program is developing technologies that can deliver large payloads (shipping container sized) around the globe with speed in support of global logistics and the USSF logistics mission sets. The Rocket Cargo Vanguard is responsible for leading a test campaign to enable up to 30 tons of cargo to be delivered anywhere on the planet within tactical timelines. The goal is to demonstrate this speed through integrated demonstrations with the DOD logistics train, including responsive mission planning, rapid cargo logistics and ground launch operations, and coordination with commercial airspace.

The AFRL Rocket Cargo Vanguard Program seeks standardized container technologies that can deploy material into space. Launch vehicles are limited in down-mass capacity during earth re-entry which limits the overall mass of delivered payloads. Commercial shipping containers are not adequately designed to survive exoatmospheric conditions which would allow the container to be separated in space prior to launch vehicle re-entry. The AFRL Rocket Cargo Vanguard Program seeks technologies which will support a container design that will adequately allow payload prolonged exposure in exoatmospheric conditions and re-entry independent of the launch vehicle after the launch vehicle has reached the desired orbit for separation.

The main deliverables will be sub-scale experiments, tests, and demonstrations that advance the operational imperatives.

PHASE I:

As this is a Direct-to-Phase-II (D2P2) topic, no Phase I awards will be made as a result of this topic. To qualify for this D2P2 topic, the Government expects the applicant(s) to demonstrate feasibility by means of a prior “Phase I-type” effort that does not constitute work undertaken as part of a prior or ongoing SBIR/STTR funding agreement.

This includes determining, insofar as possible, the scientific and technical merit and feasibility of ideas appearing to have commercial potential. It must have validated the product-market fit between the proposed solution and a potential AF stakeholder. The offeror should have defined a clear, immediately actionable plan with the proposed solution and the AF customer. Relevant areas of demonstrated experience and success include: M&S, cost benefit analysis, risk analysis, concept development, concept demonstration and concept evaluation, laboratory experimentation and field testing.

Phase I type efforts should include the assessment of emerging operational imperatives and how they show a measurable value and operational impact. The result of Phase I type efforts is to assess and demonstrate whether commercial systems can support the furtherance of the operational imperatives.

Eligibility for D2P2 is predicated on the offeror having performed a “Phase I-type” effort separate from the SBIR/STTR Programs. These efforts will include M&S, simulation of prototype concepts, cost benefit analysis, system-of-systems studies, experimentation and evaluation of operational imperatives to enable future concepts.

Prototypes, M&S and experimentation should explore a wide range of integrating commercial capabilities to support the operational imperatives. These capabilities should consider areas that are unique to military operations, logistics, mission planning, mission execution, base sustainment and logistics.

PHASE II:

A goal is for Phase II efforts to conduct sub-scale experiments and provide test articles for further test and demonstration. Experiments should address military-unique requirements that may not be otherwise met by commercial capabilities.

PHASE III DUAL USE APPLICATIONS:

Phase III shall include upgrades to the analysis, M&S, T&E results and provide mature prototypes of system concepts. Phase III shall provide a business plan and address the ability to transition technology and system concepts to commercial applications. The adapted non-Defense commercial solutions shall provide expanded mission capability for a broad range of potential Governmental and civilian users and alternate mission applications. Integration and other technical support to operational users may be required.

REFERENCES:

* 1. *Seong-Hyeon, P. * "Re-entry analysis of critical components and materials for design-for-demise techniques", ScienceDirect, 2021

1.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .