SF242-D024.pdf

Standard Form PDF 49 KB Posted

Attached to
ICED-T – Innovative Cargo Exoatmospheric Delivery Technology
Solicitation number
SF242-D024
Issued by

About this file

This is a solicitation document for a Direct-to-Phase-II (D2P2) Small Business Innovation Research (SBIR) topic under the Air Force Research Laboratory (AFRL) Rocket Cargo Vanguard Program. The solicitation, numbered SF242-D024: ICED-T (Innovative Cargo Exoatmospheric Delivery Technology), seeks concept exploration, prototype development, sub-scale experiments, and testing of thermal protection systems and heat shield technology to enable delivery of up to 100 tons of containerized cargo from exoatmospheric altitudes while surviving earth re-entry. The technology area is Space Platforms, with modernization priorities in Advanced Materials, Space Technology, and Sustainment & Logistics. No CMMC level requirement is specified, and no Technical Point of Contact is listed.

As a D2P2 topic, Phase I awards will not be made; applicants must demonstrate prior feasibility through non-SBIR/STTR "Phase I-type" efforts that validate scientific and technical merit, product-market fit with Air Force stakeholders, and include activities such as modeling and simulation, cost-benefit analysis, risk analysis, and experimentation. Phase II efforts should conduct sub-scale experiments and provide test articles addressing military-unique requirements. Phase III shall deliver mature prototypes, upgraded analysis and M&S results, T&E findings, and a business plan for transitioning technology to commercial applications. The solicitation is subject to International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR); offerors must disclose any proposed use of foreign nationals, their countries of origin, visa/work permit types, and assigned statement of work tasks. One reference is provided regarding re-entry analysis of critical components and materials for design-for-demise techniques.

View the file

Other versions and copies of SF 242

File Revision Posted Attached to
SF242-0019.pdf Revision not stated Hydrogenation for defect passivation in (Si)GeSn alloys
SF242-D025.pdf Revision not stated DEMISE - DEploy Material Into Space Experiments
SF242-0016.pdf Revision not stated Neuromorphic Camera for Space Domain Awareness
SF242-D026.pdf Revision not stated FLOATS - Floating and Loitering Ocean Advanced Technology Sensing
SF242-0017.pdf Revision not stated Cover glass solutions
SF242-0020.pdf Revision not stated Exploring Proliferated Warfighter Space Architecture (PWSA)
SF242-0015.pdf Revision not stated Programmability of Regional and/or Local Multi-Source PNT for Joint All-Domain Operations
SF242-D027.pdf Revision not stated ROC STAR - ROcket Cargo System Technologies And Research
SF242-D022.pdf Revision not stated Uncertainty Management for Space Domain Awareness of Non-Standard Threats
SF242-D028.pdf Revision not stated Strategic Advancements in Resilient Space Technologies for PWSA Enhancement
SF242-0018.pdf Revision not stated Neon recovery and reliquefication for low temperature characterization of infrared focal plane arrays
SF242-D023.pdf Revision not stated Small Satellite Swarms for ISR
SF242-D029.pdf Revision not stated Space Based Environmental Monitoring (SBEM)
SF-242.doc Revision not stated : Chilled Water piping Insulation Replacement Houston Air Route Traffic Control Center (ARTCC) Houston, Texas
Show all 14

Who attaches SF 242

Other files

File Type Posted
AF_SBIR_242_PI_DP2.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SF242-D024: ICED-T – Innovative Cargo Exoatmospheric Delivery Technology

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Space Platforms

MODERNIZATION PRIORITIES:

Advanced Materials | Space Technology | Sustainment & Logistics

KEYWORDS:

Heat Shield; thermal protection systems; high temperature materials; re-entry

ADDITIONAL INFORMATION

N/A

OBJECTIVE:

This topic seeks to perform concept exploration, prototype development, sub-scale experiments, test and evaluation of technology that enables up to 100 tons of containerized cargo from exoatmospheric altitudes surviving earth re-entry.

ITAR:

The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.

DESCRIPTION:

The AFRL Rocket Cargo Vanguard Program is developing technologies that can deliver large payloads (shipping container sized) around the globe with speed in support of global logistics and the USSF logistics mission sets. The Rocket Cargo Vanguard is responsible for leading a test campaign to enable up to 30 tons of cargo to be delivered anywhere on the planet within tactical timelines. The goal is to demonstrate this speed through integrated demonstrations with the DOD logistics train, including responsive mission planning, rapid cargo logistics and ground launch operations, and coordination with commercial airspace.

Launch vehicles are limited in down-mass capacity during earth re-entry which limits the overall mass of delivered payloads. The AFRL Rocket Cargo Vanguard Program seeks technologies which will support payload re-entry independent of the launch vehicle after the launch vehicle has reached the desired orbit for separation.

Technology includes the capability to decelerate the large payloads to survive re-entry and delivery to desired location with cargo remaining intact.

The main deliverables will be sub-scale experiments, tests, and demonstrations that advance the operational imperative.

PHASE I:

As this is a Direct-to-Phase-II (D2P2) topic, no Phase I awards will be made as a result of this topic. To qualify for this D2P2 topic, the Government expects the applicant(s) to demonstrate feasibility by means of a prior “Phase I-type” effort that does not constitute work undertaken as part of a prior or ongoing SBIR/STTR funding agreement.

This includes determining, insofar as possible, the scientific and technical merit and feasibility of ideas appearing to have commercial potential. It must have validated the product-market fit between the proposed solution and a potential AF stakeholder. The offeror should have defined a clear, immediately actionable plan with the proposed solution and the AF customer. Relevant areas of demonstrated experience and success include: M&S, cost benefit analysis, risk analysis, concept development, concept demonstration and concept evaluation, laboratory experimentation and field testing.

Phase I type efforts should include the assessment of emerging operational imperatives and how they show a measurable value and operational impact. The result of Phase I type efforts is to assess and demonstrate whether commercial systems can support the furtherance of the operational imperatives.

Eligibility for a D2P2 award is predicated on the offeror having performed a “Phase I-type” effort separate from the SBIR/STTR Programs. These efforts will include M&S, simulation of prototype concepts, cost benefit analysis, system-of-systems studies, experimentation and evaluation of operational imperatives to enable future concepts.

Prototypes, M&S and experimentation should explore a wide range of integrating commercial capabilities to support the operational imperatives. These capabilities should consider areas that are unique to military operations, logistics, mission planning, mission execution, base sustainment and logistics.

PHASE II:

A goal is for Phase II efforts to conduct sub-scale experiments and provide test articles for further test and demonstration. Experiments should address military-unique requirements that may not be otherwise met by commercial capabilities.

PHASE III DUAL USE APPLICATIONS:

Phase III shall include upgrades to the analysis, M&S, T&E results and provide mature prototypes of system concepts. Phase III shall provide a business plan and address the ability to transition technology and system concepts to commercial applications. The adapted non-Defense commercial solutions shall provide expanded mission capability for a broad range of potential Governmental and civilian users and alternate mission applications. Integration and other technical support to operational users may be required.

REFERENCES:

* 1. *Seong-Hyeon, P. * "Re-entry analysis of critical components and materials for design-for-demise techniques", ScienceDirect, 2021

1.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .