SF242-0017.pdf

Standard Form PDF 49 KB Posted

Attached to
Cover glass solutions
Solicitation number
SF242-0017
Issued by

About this file

This is a federal contract topic solicitation from the U.S. Space Force Space Systems Command (SSC) for cover glass solutions to improve space-based photovoltaic power generation. The topic number is SF242-0017 and falls under Materials and Space Platforms technology areas with Space Technology as the modernization priority.

The objective is to develop alternatives and modifications to space-qualified cover glass and encapsulants that increase insolation capture and conversion efficiencies of integrated photovoltaic cells, with solutions demonstrating ability to increase power generation from systems utilizing state-of-the-practice photovoltaic devices. SSC requires each mission block to have 3–5% more power generation, and since efficiency improvements in III-V solar cells have plateaued, advances in cover glass technology are critical. The solicitation addresses three primary approaches: (1) texturing cover glass to improve non-normal incident light transparency; (2) down-shifting molecules to absorb harmful UV photons and convert them to visible wavelengths; and (3) improvements to anti-reflective coatings with wider bandgap and lower cost options.

Phase I requires awardees to demonstrate materials capable of increased photon throughput with wavelengths relevant for state-of-art photovoltaics without impacting durability or usability in space environments. Phase II requires development and demonstration of higher power generation by integrating space-qualified solar cells with Phase I technology advancements, including electrical characterization and stress testing compared to state-of-art PV systems. Phase III focuses on developing robust manufacturing methods, demonstrating consistency and reliability through statistical process control, establishing licensing or partnerships with space-grade photovoltaic vendors, and performing qualification and validation testing to advance Technology Readiness Level from 4 to 6 or higher. Technology is restricted under ITAR (22 CFR Parts 120-130) and EAR (15 CFR Parts 730-774). No CMMC level requirement applies. No Technical Point of Contact is listed.

View the file

Other versions and copies of SF 242

File Revision Posted Attached to
SF242-0019.pdf Revision not stated Hydrogenation for defect passivation in (Si)GeSn alloys
SF242-D025.pdf Revision not stated DEMISE - DEploy Material Into Space Experiments
SF242-0016.pdf Revision not stated Neuromorphic Camera for Space Domain Awareness
SF242-D026.pdf Revision not stated FLOATS - Floating and Loitering Ocean Advanced Technology Sensing
SF242-0020.pdf Revision not stated Exploring Proliferated Warfighter Space Architecture (PWSA)
SF242-0015.pdf Revision not stated Programmability of Regional and/or Local Multi-Source PNT for Joint All-Domain Operations
SF242-D027.pdf Revision not stated ROC STAR - ROcket Cargo System Technologies And Research
SF242-D024.pdf Revision not stated ICED-T – Innovative Cargo Exoatmospheric Delivery Technology
SF242-D022.pdf Revision not stated Uncertainty Management for Space Domain Awareness of Non-Standard Threats
SF242-D028.pdf Revision not stated Strategic Advancements in Resilient Space Technologies for PWSA Enhancement
SF242-0018.pdf Revision not stated Neon recovery and reliquefication for low temperature characterization of infrared focal plane arrays
SF242-D023.pdf Revision not stated Small Satellite Swarms for ISR
SF242-D029.pdf Revision not stated Space Based Environmental Monitoring (SBEM)
SF-242.doc Revision not stated : Chilled Water piping Insulation Replacement Houston Air Route Traffic Control Center (ARTCC) Houston, Texas
Show all 14

Who attaches SF 242

Other files

File Type Posted
AF_SBIR_242_PI_DP2.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SF242-0017: Cover glass solutions

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Materials | Space Platforms

MODERNIZATION PRIORITIES:

Space Technology

KEYWORDS:

cover glass; texturing; down-shifting molecules; anti-reflective coating; reflective loss; space solar; power systems

ADDITIONAL INFORMATION

N/A

OBJECTIVE:

Improve space-based photovoltaic power generation through alternatives and modifications to space-qualified cover glass and encapsulants that increase insolation capture and conversion efficiencies of integrated photovoltaic cells. Solutions should demonstrate the ability to increase power generation from systems utilizing state-of-practice photovoltaic devices.

ITAR:

The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.

DESCRIPTION:

Space Systems Command (SSC), located at Los Angeles Air Force Base, is responsible for developing, equipping, fielding, and sustaining lethal and resilient space capabilities for warfighters. Historically, SSC requires each mission block to have 3-5% more power. This is critical for the United States to maintain space dominance over its adversaries. Unfortunately, efficiency improvements in III-V solar cells have begun to plateau and obtaining 3-5% more power due exclusively through cell efficiency gains is becoming increasing unlikely. In order to reach the goals set by SSC, increased power generation must come from non-traditional improvement methods, including advances in cover glass technology. Cover glass is critical to protect solar cells from the harsh environment of space in Earth’s orbit. Since it is a necessity to have in the system, finding a way to utilize cover glass beyond just a protective barrier can lead to increased performance in the solar module system. There are several approaches to obtain this goal. First, there has been success in literature in texturing cover glass to improve non-normal incident light transparency. By increasing transparency, more light will reach the solar cell to be converted to useful energy that would otherwise be lost. Second, down-shifting molecules absorb harmful UV photons and convert/reemit them in the visible wavelength. This increases the concentration of useful energy reaching the solar cells while simultaneously decreasing the amount of UV light that can degrade them. Last, there is room for improvement in traditional, chemically applied anti-reflective coatings (ARCs). Wider bandgap, less expensive ARCs is another way to increase the amount of light that reaches the solar cells to increase their total power conversion efficiency.

Mitigating losses is becoming crucial to keep up with the demands of the increasing more complex and power-hungry spacecrafts fielded by the U.S. Space Force.

PHASE I:

Awardee(s) will demonstrate materials capable of increased throughput of photons with wavelengths relevant for state of art photovoltaics for space assets. Approaches should aim to modify or replace space-grade cover glass without impacting the durability and usability of the material in a space environment. Candidate technologies include textured cover glass surfaces, doped cover glass or films capable of wavelength shifting non-useable photons, or high-efficiency, low cost anti-reflective coatings.

PHASE II:

Awardee(s) will develop and demonstrate higher power generation by integrating space-qualified solar cells to the technology advancements demonstrated in Phase 1. Performance should be tested in relevant parameters to the space environment, including electrical characterization and stress testing. Results should be compared to relevant, state of art PV systems.

PHASE III DUAL USE APPLICATIONS:

Awardee(s) will develop robust manufacturing method(s) and demonstrate consistency and reliability through statistical process control and relevant characterization. Awardee(s) will develop licensing or partnerships to transition technology to established vendors of space-grade photovoltaics. Awardee(s) will perform relevant qualification and validation testing through flight-like articles to advance TRL from 4 to 6 or higher.

REFERENCES:

* 1. *Reference [1] https://www.nrel.gov/docs/fy01osti/28264.pdf *Reference [2] https://www.sciencedirect.com/science/article/pii/S0038092X23004061 *Reference [3] https://ieeexplore.ieee.org/abstract/document/654284 *Reference [4] https://www.sciencedirect.com/science/article/abs/pii/S0927024809000762 *Reference [5] USSF Power & Energetics CCT Tech Need 857 – Space Photovoltaic Cell and CIC Efficiency

1.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .