SECTION 080671 DOOR HARDWARE.pdf

SECTION 080671 – DOOR HARDWARE SCHEDULE

PART 1 - GENERAL

1.1 RELATED DOCUMENTS

A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section.

1.2 SUMMARY

A. This Section references specification sections relating to commercial door hardware for the following:

1. Swinging doors.

2. Sliding Doors.

3. Other doors to the extent indicated.

B. Commercial door hardware includes, but is not necessarily limited to, the following:

1. Mechanical door hardware.

2. Electromechanical and access control door hardware.

3. Electromechanical and access control door hardware power supplies, back-ups and surge protection.

4. Automatic operators.

5. Cylinders specified for doors in other sections.

C. Related Sections:

1. Division 08 Section “Door Hardware”.

2. Division 28 Section “Access Control Hardware Devices”.

D. Codes and References: Comply with the version year adopted by the Authority Having Jurisdiction.

1. ANSI A117.1 - Accessible and Usable Buildings and Facilities.

2. ICC/IBC - International Building Code.

3. NFPA 70 - National Electrical Code.

4. NFPA 80 - Fire Doors and Windows.

5. NFPA 101 - Life Safety Code.

6. NFPA 105 - Installation of Smoke Door Assemblies.

7. State Building Codes, Local Amendments.

E. Standards: Reference Related Sections for requirements regarding compliance with applicable industry standards.

1.3 SUBMITTALS

A. Product Data: Manufacturer's product data sheets including installation details, material descriptions, dimensions of individual components and profiles, operational descriptions and finishes.

B. Door Hardware Schedule: Prepared by or under the supervision of supplier, detailing fabrication and assembly of door hardware, as well as procedures and diagrams. Coordinate the final Door Hardware Schedule with doors, frames, and related work to ensure proper size, thickness, hand, function, and finish of door hardware.

1. Format: Comply with scheduling sequence and vertical format in DHI's "Sequence and Format for the Hardware Schedule."

2. Organization: Organize the Door Hardware Schedule into door hardware sets indicating complete designations of every item required for each door or opening. Organize door hardware sets in same order as in the Door Hardware Sets at the end of Part 3.

Submittals that do not follow the same format and order as the Door Hardware Sets will be rejected and subject to resubmission.

3. Content: Include the following information:

a. Type, style, function, size, label, hand, and finish of each door hardware item.

b. Manufacturer of each item.

c. Fastenings and other pertinent information.

d. Location of door hardware set, cross-referenced to Drawings, both on floor plans and in door and frame schedule.

e. Explanation of abbreviations, symbols, and codes contained in schedule.

f. Mounting locations for door hardware.

g. Door and frame sizes and materials.

4. Submittal Sequence: Submit the final Door Hardware Schedule at earliest possible date, particularly where approval of the Door Hardware Schedule must precede fabrication of other work that is critical in the Project construction schedule. Include Product Data, Samples, Shop Drawings of other work affected by door hardware, and other information essential to the coordinated review of the Door Hardware Schedule.

C. Keying Schedule: Prepared under the supervision of the Owner, separate schedule detailing final keying instructions for locksets and cylinders in writing. Include keying system explanation, door numbers, key set symbols, hardware set numbers and special instructions. Owner to approve submitted keying schedule prior to the ordering of permanent cylinders.

D. Product Test Reports: Indicating compliance with cycle testing requirements, based on evaluation of comprehensive tests performed by manufacturer and witnessed by a qualified independent testing agency.

E. Operating and Maintenance Manuals: Provide manufacturers operating and maintenance manuals for each item comprising the complete door hardware installation in quantity as required in Division 01, Closeout Submittals.

The manual to include the name, address, and contact information of the manufacturers providing the hardware and their nearest service representatives. The final copies delivered after completion of the installation test to include "as built" modifications made during installation, checkout, and acceptance.

F. Warranties and Maintenance: Special warranties and maintenance agreements specified in the Related Sections.

1.4 DELIVERY, STORAGE, AND HANDLING

A. Inventory door hardware on receipt and provide secure lock-up and shelving for door hardware delivered to Project site. Do not store electronic access control hardware, software or accessories at Project site without prior authorization.

B. Tag each item or package separately with identification related to the final Door Hardware Schedule, and include basic installation instructions with each item or package.

C. Deliver, as applicable, permanent keys, cylinders, cores, access control credentials, software and related accessories directly to Owner via registered mail or overnight package service. Instructions for delivery to the Owner shall be established at the "Keying Conference".

1.5 WARRANTY

A. General Warranty: Reference Division 01, General Requirements. Special warranties specified in this Article shall not deprive Owner of other rights Owner may have under other provisions of the Contract Documents and shall be in addition to, and run concurrent with, other warranties made by Contractor under requirements of the Contract Documents.

1.6 MAINTENANCE SERVICE

A. Maintenance Tools and Instructions: Furnish a complete set of specialized tools and maintenance instructions as needed for Owner's continued adjustment, maintenance, and removal and replacement of door hardware.

PART 2 - PRODUCTS

2.1 SCHEDULED DOOR HARDWARE

A. Refer to “PART 3 – EXECUTION” for required specification sections.

PART 3 - EXECUTION

3.1 DOOR HARDWARE SETS

A. The door hardware sets represent the design intent and direction of the owner and architect. They are a guideline only and should not be considered a detailed hardware schedule. Discrepancies, conflicting hardware and missing items should be brought to the attention of the architect with corrections made prior to the bidding process. Omitted items not included in a hardware set should be scheduled with the appropriate additional hardware required for proper application and functionality.

1. Quantities listed are for each pair of doors, or for each single door.

2. The supplier is responsible for handing and sizing all products.

3. Where multiple options for a piece of hardware are given in a single line item, the supplier shall provide the appropriate selection for the material and application.

4. At existing openings with new hardware the supplier shall field inspect existing conditions prior to the submittal stage to verify the specified hardware will work as required. Provide alternate solutions and proposals as needed.

B. Products listed in the hardware sets shall be supplied by and in accordance with the requirements described in the specification section as noted for each item.

1. Section 08 71 00 – Door Hardware.

2. Section 28 15 15.11 – Direct Interface Integrated Locking Devices.

C. Manufacturer’s Abbreviations:

1. MK - McKinney

2. MR - Markar

3. RO - Rockwood

4. SA - SARGENT

5. BE - dormakaba Best

6. HS - HES

7. RF - Rixson

8. PE - Pemko

9. SU - Securitron

10. OT - Other

Hardware Sets

Set: 1.0

Doors: 129, 223

1 Pivot EP-5J US26D MK 087100

1 Privacy Lock (Series 1000, Gr. 1, F22) 49 8265 LNP x LB thumb turn

US26D SA 087100

2 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

1 Door Stop (L02121) RM875 US32D RO 087100

2 Door Edge Seal 369AP - both vertical edges

PE 087100

1 Combination Stop/Strike CSS-9 x CH - to suit jamb depth

US26D MK 087100

Notes: Require BAA waiver for components EP-5J, 369AP, and CSS-9 x CH.

Set: 2.0 Doors: 100

Electric Strike (A156.31, Gr. 1) 9600-LBSM 630 HS 087100 ⚡

1 Motion Sensor XMS SU 087100 ⚡ 1 Door Position Switch DPS-M-BK SU 087100 ⚡

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

1 Reuse Balance of Existing Door Hardware OT

1 Card Reader - Provided by Security Contractor 00 281300

Notes: ** Confirm existing door hardware compatibility, on site, prior to submittals of door hardware schedule.

Require BAA waiver for component AQD.

Door normally closed and locked. Valid use of card reader outside temporarily unlocks electric strike permitting access.

Motion sensor mounted on egress side of door as request to exit for shunting of door monitoring upon egress.

Free egress always permitted.

Set: 3.0 Doors: ST-1-1, ST1-2, ST1-3, ST1-4, ST2-1, ST2-2, ST2-3, ST2-4

3 Hinge (heavy weight - A8111) T4A3786 / T4A4786 US26D MK 087100

Fail Safe Fire Exit Device (A156.3, Grade 1)

12 43 53 55 72 8875-24v

ETP US32D SA 087100 ⚡

1 Permanent Cylinder Core - to match Owner's key system

626 BE 087100

https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811948, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871330, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871330, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=13808777, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168875927, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168875927, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811949, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811949, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948319,211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746472,181838734, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746469,187746486, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948280,168876497, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948280,168876497, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948280,168876497, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948280,168876497, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948280,168876497, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948280,168876497, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948280,168876497, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948280,168876497, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811835, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211869230,211868602,211868323, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211869230,211868602,211868323, 1 Surface Closer (C02011) TB 1431 O - pull side mount

EN SA 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

1 Door Stop (L02121) RM875 US32D RO 087100

1 Smoke / Sound Seal S88D - head and jambs PE 087100

1 ElectroLynx Harness QC-C___ (power transfer to exit device rail)

MK 087100 ⚡

1 Electric Power Transfer EL-CEPT SU 087100 ⚡

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 ElectroLynx Harness QC-C___ (power transfer to exit device lever trim)

MK 087100 ⚡

1 Alarm PZ1 (single gang receptacle)

SU 087100 ⚡

1 Door Position Switch DPS-M-BK SU 087100 ⚡

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

2 Card Reader - Provided by Security

Notes: Require BAA waiver for components PZ1 and AQD.

Card readers both sides. Fail safe electrified trim on stairwell side. Valid use of card reader either side of door shall permit pasage through door without sounding alarm, Provide door position switch and local alarm that sounds if the door is opened from the corridor side without presentation of a valid credential.

Alarm shall shunt when door closes.

Set: 4.0 Doors: 120A

Hinge (heavy weight -

A8111) T4A3786 / T4A4786 US26D MK 087100

2 Flush Bolt (L04251) 555* US26D RO 087100

1 Dust Proof Strike (L04021) 570* US26D RO 087100

1 Storeroom Lock (Series 1000, Gr.1, F07) 72 8204 LNP US26D SA 087100

1 Permanent Cylinder Core - to match Owner's key system 626 BE 087100

1 SMART Pac Bridge Rectifier 2005M3 HS 087100 ⚡ https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=13808777, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168874097, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746466,187746493, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=181838677, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=181838677, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746469,187746486, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811835, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873942, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=114112275, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871321, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, 1 Electric Strike (A156.31, Gr. 1) 4500C-LBM 630 HS 087100 ⚡

1 ElectroLynx Adaptor 2004M HS 087100 ⚡

1 Surf Overhead Stop (C02511)

9-X36* 630 RF 087100

1 Surface Closer (C02021) TB 1431 CPS EN SA 087100

2 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

2 Silencer (L03011) 608 / 609 RO 087100

1 Electric Power Transfer EL-CEPT SU 087100 ⚡

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 ElectroLynx Harness QC-C___ (power transfer to electric strike location)

MK 087100 ⚡

2 Door Position Switch DPS-M-BK SU 087100 ⚡

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

Notes: Require BAA waiver for components 2004M, 9-X36, and AQD.

Door normally closed and locked. Valid use of card reader outside temporarily unlocks electric strike permitting access. Key override outside retracts latch bolt.

Motion sensor mounted on egress side of door as request to exit for shunting https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638017, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=70787782, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746466,187746493, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746469,187746486, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, Set: 5.0 Doors: 123

3 Hinge (heavy weight - A8111) T4A3786 / T4A4786 US26D MK 087100

1 Storeroom Lock (Series 1000, Gr.1, F07) 72 8204 LNP US26D SA 087100

1 Permanent Cylinder Core - to match Owner's key system 626 BE 087100

1 SMART Pac Bridge Rectifier 2005M3 HS 087100 ⚡

1 Electric Strike (A156.31, Gr. 1)

4500C-LBM 630 HS 087100 ⚡

1 ElectroLynx Adaptor 2004M HS 087100 ⚡

1 Conc Overhead Stop (C02511) 2-X36* 652 RF 087100

1 Surface Closer (C02011) TB 1431 O - pull side mount EN SA 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

3 Silencer (L03011) 608 / 609 RO 087100

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 Motion Sensor XMS SU 087100 ⚡ 1 Door Position Switch DPS-M-BK SU 087100 ⚡

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

Notes: Require BAA waiver for components 2004M, 2-X36, and AQD.

unlocks electric strike permitting access. Key override outside retracts latch bolt.

Motion sensor mounted on egress side of door as request to exit for shunting

Set: 6.0 Doors: 104, 117, 130, 133, 134, 137, , 224, 228, 231 Door 134A (60 MIN Rated) Door 212 (45 MIN Rated) Door 229 (20 MIN Rated)

1 Continuous Hinge (A51031B) FM300 x door height 630 MR 087100

1 Storeroom Lock (Series 1000, Gr.1, F07)

72 8204 LNP US26D SA 087100

1 Permanent Cylinder Core - to match Owner's key system 626 BE 087100 https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811835, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871321, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638017, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=70787525, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746472,181838734, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746469,187746486, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180635589, 1 SMART Pac Bridge Rectifier 2005M3 HS 087100 ⚡

Electric Strike (A156.31, Gr. 1) 4500C-LBM 630 HS 087100 ⚡

1 ElectroLynx Adaptor 2004M HS 087100 ⚡ 1 Surface Closer (C02011) TB 1431 O - pull side mount EN SA 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

1 Door Stop (L02121) RM875 US32D RO 087100

3 Silencer (L03011) 608 / 609 RO 087100

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 Motion Sensor XMS SU 087100 ⚡ 1 Door Position Switch DPS-M-BK SU 087100 ⚡

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

1 Card Reader - Provided by Security Contractor

00 281300

Notes: Require BAA waiver for components 2004M and AQD.

unlocks electric strike permitting access. Key override outside retracts latch bolt.

Motion sensor mounted on egress side of door as request to exit for shunting

Set: 7.0 Doors: 136, 232 (45 MIN Rated)

Storeroom Lock (Series 100, Gr. 1, F07 - paddle trim)

72 8204 ALP US32D SA 087100

1 Permanent Cylinder Core - to match Owner's key system 626 BE 087100

1 SMART Pac Bridge Rectifier 2005M3 HS 087100 ⚡

1 Electric Strike (A156.31, Gr. 1) 4500C-LBM 630 HS 087100 ⚡

1 ElectroLynx Adaptor 2004M HS 087100 ⚡ 1 Surface Closer (C02011) TB 1431 O - pull side mount EN SA 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

1 Door Stop (L02121) RM875 US32D RO 087100

3 Silencer (L03011) 608 / 609 RO 087100

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 Motion Sensor XMS SU 087100 ⚡ https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638017, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=13808777, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746472,181838734, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746469,187746486, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180635589, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211868059,211871321, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638017, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=13808777, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746472,181838734, 1 Door Position Switch DPS-M-BK SU 087100 ⚡

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

1 Card Reader - Provided by Security Contractor

00 281300 unlocks electric strike permitting access. Key override outside retracts latch bolt.

Motion sensor mounted on egress side of door as request to exit for shunting

Set: 8.0 Doors: C217

1 Permanent Cylinder Core

- to match Owner's key system 626 BE 087100

1 SMART Pac Bridge Rectifier 2005M3 HS 087100 ⚡

1 Electric Strike (A156.31, Gr. 1) 4500C-LBM 630 HS 087100 ⚡

1 ElectroLynx Adaptor 2004M HS 087100 ⚡ 1 Surface Closer (C02021) TB 1431 P10 EN SA 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

1 Door Stop (L02121) RM875 US32D RO 087100

3 Silencer (L03011) 608 / 609 RO 087100

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 Motion Sensor XMS SU 087100 ⚡ 1 Door Position Switch DPS-M-BK SU 087100 ⚡

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

unlocks electric strike permitting access. Key override outside retracts latch bolt.

Motion sensor mounted on egress side of door as request to exit for shunting of door monitoring upon egress.

Free egress always permitted.

https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746469,187746486, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180635589, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871321, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638017, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=13808777, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746472,181838734, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746469,187746486, Set: 9.0 Doors: 121, 131, 225

1 Permanent Cylinder Core

- to match Owner's key system 626 BE 087100

1 SMART Pac Bridge Rectifier 2005M3 HS 087100 ⚡

1 Electric Strike (A156.31, Gr. 1) 4500C-LBM 630 HS 087100 ⚡

1 ElectroLynx Adaptor 2004M HS 087100 ⚡ 1 Surface Closer (C02021) TB 1431 CPS EN SA 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

3 Silencer (L03011) 608 / 609 RO 087100

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 Motion Sensor XMS SU 087100 ⚡ 1 Door Position Switch DPS-M-BK SU 087100 ⚡

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

1 Card Reader

- Provided by Security unlocks electric strike permitting access. Key override outside retracts latch bolt.

Motion sensor mounted on egress side of door as request to exit for shunting https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180635589, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871321, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638017, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746472,181838734, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746469,187746486, Set: 10.0 Doors: 132, 213, 226, 227, Doors: 135 (45 MIN Rated) Doors: 230 (60 MIN Rated)

1 Storeroom Lock (Series 1000, Gr.1, F07)

72 8204 LNP US26D SA 087100

1 Permanent Cylinder Core - to match Owner's key system 626 BE 087100

1 Conc Overhead Stop (C02511) 2-X36* 652 RF 087100

1 Surface Closer (C02011) TB 1431 O - pull side mount EN SA 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

3 Silencer (L03011) 608 / 609 RO 087100

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 Motion Sensor XMS SU 087100 ⚡ 1 Door Position Switch DPS-M-BK SU 087100 ⚡

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

1 Card Reader unlocks electric strike permitting access. Key override outside retracts latch bolt.

Motion sensor mounted on egress side of door as request to exit for shunting

Set: 11.0 Doors: 119, 214 (45 MIN Rated)

Storeroom Lock (Series 100, Gr. 1, F07 - paddle trim)

72 8204 ALP US32D SA 087100

1 Permanent Cylinder Core - to match Owner's key system 626 BE 087100

1 SMART Pac Bridge Rectifier 2005M3 HS 087100 ⚡

1 Electric Strike (A156.31, Gr. 1) 4500C-LBM 630 HS 087100 ⚡

1 ElectroLynx Adaptor 2004M HS 087100 ⚡

Conc Overhead Stop

(C02511) 2-X36* 652 RF 087100

https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180635589, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871321, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=70787525, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746472,181838734, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746469,187746486, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180635589, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211868059,211871321, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638113, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180638017, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=70787525, 1 Surface Closer (C02011) TB 1431 O - pull side mount EN SA 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

3 Silencer (L03011) 608 / 609 RO 087100

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 Motion Sensor XMS SU 087100 ⚡ 1 Door Position Switch DPS-M-BK SU 087100 ⚡

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

1 Card Reader unlocks electric strike permitting access. Key override outside retracts latch bolt.

Motion sensor mounted on egress side of door as request to exit for shunting

Set: 12.0 Doors: 105, 106, 107, 108, 109, 115, 142, 144, 145, 146, 147, 148, 201, 202, 203, 204, 205, 208, 211, 237, 239, 240, 241, 242

1 Continuous Hinge FM300 x CTP x door height 630 MR 087100

1 Access Control Mort Lock 72 M1-82271- FIPS LNP US26D SA 281515.11 ⚡

1 Permanent Cylinder Core - to match Owner's key system

626 BE 087100

1 Surface Closer (C02021) TB 1431 CPS EN SA 087100

1 Kick Plate (J102) K1050 10" high CSK BEV US32D RO 087100

1 Smoke / Sound Seal S88D - head and jambs PE 087100

1 Electric Power Transfer EL-CEPT SU 087100 ⚡

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 ElectroLynx Harness QC-C___ (power transfer to access control lock location)

MK 087100 ⚡

1 Card Reader integral within access control mortise lock SA

1 Power Supply AQD x amp draw as required x 8C8R2

SU 087100 ⚡

Notes: Door normally closed and locked. Presentation of valid card will temporarily unlock outside lever to permit access.

Door is monitored through door position switch included with lockset.

https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746472,181838734, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746469,187746486, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180635589, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211934281,211934203,211934186, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168874097, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746466,187746493, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, Lockset has built in request to exit switch inside lever to shunt door position switch for authorized egress.

Verify credential type with owner.

Set: 12.1 Doors: 243

1 Access Control Mort Lock 72 M1-82271- FIPS LNP US26D SA 281515.11 ⚡

1 Permanent Cylinder Core

- to match Owner's key system 626 BE 087100

1 Surface Closer (C02021) TB 1431 CPS EN SA 087100

1 Kick Plate (J102) K1050 10" high CSK BEV US32D RO 087100

1 Smoke / Sound Seal S88D - head and jambs PE 087100

1 Electric Power Transfer EL-CEPT SU 087100 ⚡

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 Crimp Tool QC-R003 MK 281515.11 ⚡ 1 Extractor Tool QC-R002 MK 281515.11 ⚡ 1 Repair Kit QC-R001 MK 281515.11 ⚡

1 ElectroLynx Harness QC-C___ (power transfer to access control lock location)

MK 087100 ⚡

1 Test Unit WT2 SA 281515.11 ⚡

1 Card Reader integral within access control mortise lock SA

1 Power Supply AQD x amp draw as required

Door is monitored through door position switch included with lockset.

Lockset has built in request to exit switch inside lever to shunt door position switch for authorized egress.

Set: 13.0 Doors: 112, 113, 114, 138, 139, 140, 209, 210, 215, 216, 233, 234, 235

1 Access Control Mort Lock 72 M1-82271- FIPS LNP US26D SA 281500 ⚡

1 Permanent Cylinder Core - to match Owner's key system

626 BE 087100

https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180635589, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211934281,211934203,211934186, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168874097, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746466,187746493, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811884, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811886, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811884, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=120413932, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999699,168612584, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211934281,211934203,211934186, 1 Surface Closer (C02021) TB 1431 P10 EN SA 087100

1 Kick Plate (J102) K1050 10" high CSK BEV US32D RO 087100

1 Door Stop (L52251) RM875 US32D RO 087100

1 Smoke / Sound Seal S88D - head and jambs PE 087100

1 Electric Power Transfer EL-CEPT SU 087100 ⚡

1 ElectroLynx Harness QC-C1500P (power transfer or electric strike to junction box above)

MK 087100 ⚡

1 ElectroLynx Harness QC-C___ (power transfer to access control lock location)

MK 087100 ⚡

1 Card Reader integral within access control mortise lock SA

1 Power Supply AQD x amp draw as required

Door is monitored through door position switch included with lockset.

Lockset has built in request to exit switch inside lever to shunt door position switch for authorized egress.

Set: 14.0 Doors: 135A

3 Hinge, Full Mortise (A8112)

TA2714 / TA4714 US26D MK 087100

1 Storeroom Lock (Series 1000, Gr.1, F07) 72 8204 LNP US26D SA 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

1 Door Stop (L02121) RM875 US32D RO 087100

3 Silencer (L03011) 608 / 609 RO 087100

Notes: Function: Latch bolt operated by key outside or lever inside. Outside lever always rigid. Inside lever always free for egress.

Set: 15.0 Doors: 118 (20 MIN Rated)

3 Hinge, Full Mortise (A8112) TA2714 / TA4714 US26D MK 087100 https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=13808777, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168874097, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746466,187746493, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811883, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=187746475,211873404, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811825, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871321, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=13808777, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811825, 1 Permanent Cylinder Core - to match Owner's key system 626 BE 087100

Surf Overhead Stop

(C02511) 9-X36* 630 RF 087100

Notes: Function: Latch bolt operated by key outside or lever inside. Outside lever always rigid. Inside lever always free for egress.

Set: 16.0 Doors: 125, 126, 219

1 Office Lock (Series 1000, Gr. 1, F04) 72 8205 LNP x LB thumb turn US26D SA 087100

1 Permanent Cylinder Core

- to match Owner's key system 626 BE 087100

Notes: Latch operated by lever either side, unless outside lever is locked or unlocked by key outside or thumb turn inside. Outside lever is unlocked by key outside or thumb turn inside. Latch is retracted by key outside when outside lever is locked. Inside lever always free.

Set: 17.0 Doors: 220

Office Lock (Series 1000, Gr. 1, F04) 72 8205 LNP x LB thumb turn US26D SA 087100

1 Permanent Cylinder Core - to match Owner's key system

626 BE 087100

1 Surf Overhead Stop (C02511) 10-X36* 652 RF 087100

Notes: * Waiver may be required to comply with Buy American Act.

Latch bolt by lever either side, unless outside lever is locked or unlocked by key or thumb turn. Unlocked by key or thumb turn. Outside lever is locked or unlocked by key or thumb turn. Latch bolt retracted by key when outside lever is locked. Inside lever always free for egress.

Set: 18.0 Doors: 123B, 218 https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=70787782, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811825, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871322, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=13808777, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811825, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871322, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=70787234, 1 Passage Latch (Series 1000 Gr.1, F01) 8215 LNP US26D SA 087100

1 Surface Closer (C02021) TB 1431 P10 EN SA 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

Set: 19.0 Doors: 105A, 106A, 107A, 108A, 109A, 112A, 113A, 114A, 115A, 138A, 139A, 140A, 142A, 144A, 145A, 146A, 147A, 148A, 201A, 202A, 203A, 204A, 205A, 208A, 209A, 210A, 211A, 215A, 216A, 233A, 234A, 235A, 237A, 239A, 240A, 241A, 242A, 243A

1 Privacy Lock (Series 1000, Gr. 1, F22) 49 8265 LNP x LB thumb turn US26D SA 087100

1 Surf Overhead Stop (C02511) 10-X36* 652 RF 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

1 Mop Plate (J100) K1050 4" high CSK BEV -pull side of door

US32D RO 087100

1 Coat Hook 796* US26D RO 087100

Notes: * Waiver may be required to comply with Buy American Act.

Set: 20.0 Doors: 128, 222

1 Institutional Privacy Lock (Series 1000, Gr. 1, F26) 50 72 8267 LNP x LB thumb turn

US26D SA 087100

1 Permanent Cylinder Core

- to match Owner's key system 626 BE 087100

1 Kick Plate (J100) K1050 10" high CSK BEV US32D RO 087100

1 Mop Plate (J100) K1050 4" high CSK BEV -pull side of door

US32D RO 087100

Notes: Latch bolt operated by lever either side, except when outside lever is locked by thumb turn inside. Operating inside lever or closing door unlocks https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168811825, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211871421,211870338,211871329, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211928293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211888528, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=13808777, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=168873950, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211862171,…