SCNG_CDRL_EXHIBIT_H_SERIES.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

DATA ITEM DESCRIPTION

Title: HUMAN SYSTEMS INTEGRATION PROGRAM PLAN

Number: DI-HFAC-81743A Approval Date: 20110421

AMSC Number: N9190 Limitation: N/A

DTIC Applicable: N/A GIDEP Applicable: N/A

Office of Primary Responsibility: AS/AIR 4.6 Applicable Forms: N/A

Use/Relationship: The Human Systems Integration Program Plan (HSIPP) describes the contractor’s Human Systems Integration (HSI) program; its elements to support requirements and activities for HSI specified in the contract; and how they will be managed and integrated with other program elements. It does not take the place of related plans such as the System

Safety Plan; Training Plan; Programmatic Environment, Safety, & Occupational Health

Evaluation; Human Engineering Program Plan (HEPP); or an HSI section in the Systems

Engineering Management Plan, unless the procuring agency so directs.

a. This Data Item Description (DID) contains the format and instructions for preparing the

HSIPP content in response to applicable tasks delineated in the contract Statement of Work

(SOW).

b. Where cited below, users refer, as applicable, to operators, maintainers, trainers, support personnel (including transporters), and manufacturers.

c. This DID supersedes DI-HFAC-81743.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as cited in the Acquisition Streamlining and Standardization Information System (ASSIST) database at the time of the solicitation.

2. Format. The HSIPP format shall be contractor selected and contain all the content elements described below as tailored per paragraph 3. Unless effective presentation would be degraded, the format used initially shall be used for subsequent submissions. Revisions shall be clearly indicated in a manner consistent with standard editorial practices.

3. Tailoring. The HSIPP shall be tailored to reflect the SOW, system specification, and phase of development. The proposed tailoring of the HSIPP content shall identify the paragraph, the proposed changes, and a rationale. Tailoring specified by the procuring agency shall also be included. If no tailoring is proposed beyond that specified by the procuring agency, this shall be stated.

4. Content. The HSIPP shall contain the information described in the following paragraphs.

a. Front matter. Table of contents; lists of tables, figures, and appendices, as applicable;

and a list of acronyms and abbreviations.

b. Overview.

i. Provide the HSIPP purpose and scope. Briefly describe the system, its concept of operations, mission, human role(s), operational environment, predecessor system(s), if any, and related HSI lessons learned. Provide the system acquisition category and

Source: http://assist.dla.mil -- Downloaded: 2021-06-10T19:25Z Check the source to verify that this is the current version before use.

DI-HFAC-81743A

2 of 5 pages current phase of development. If applicable, state when the next submission of the

HSIPP is due.

ii. Describe the overall HSI objectives for the program, the HSI domains that will be addressed, and the strategy for addressing HSI domain objectives individually and in domain trade studies. If any HSI domains will not be addressed, provide a rationale. Briefly describe the major activities that must be accomplished in applying HSI to the system development, consistent with the contract SOW, system requirements, specification(s), and work breakdown structure.

iii. Provide a list of any other HSI-related contract deliverables or documents (e.g., Training Plan, Safety Plan, Manpower Estimate). For any section below whose content is substantially covered in another document, the contractor has the option of providing the required content in the HSIPP, or providing a summary of the content and reference(s) or link(s) to the document section(s) that contain the content.

c. Organization.

i. Human Systems Integration organization. Identify, describe, and provide an organization chart of the contractor’s primary organization elements(s) and primary

HSI organization elements, including the HSI Integrated Product Team, if any.

Identify the HSI domain(s) addressed by each element; to whom the HSI manager/lead and HSI domain leads report; and the reporting and responsibility relationships between the HSI manager/lead and the HSI domain leads. For key positions (e.g., HSI manager/lead, domain leads, key practitioners), provide summary job descriptions and the minimum required qualifications.

ii. Human Systems Integration organization relationships. Describe the relationships of the contractor’s HSI organization element(s) to other contractor organization elements responsible for areas affected by HSI, such as systems engineering;

hardware and software design teams; training; test and evaluation; related disciplines (e.g., reliability, maintainability, supportability); applicable working groups; and government HSI counterparts.

iii. Human Systems Integration working group. Describe the composition of the HSI working group (e.g., contractor, subcontractor, and procuring agency HSI domain representatives and user group representatives), and its responsibility, authority, and accountability for ensuring compliance with HSI requirements. Provide a charter for the working group.

d. Human Systems Integration Key Performance Parameters and Key System Attributes.

Describe HSI Key Performance Parameters (KPPs) and HSI Key System Attributes, if any.

e. Human Systems Integration support of affordability and performance goals. Describe the methods by which the contractor will identify and conduct tradeoffs between HSI domains and other program elements in support of primary HSI goals: to reduce total system ownership costs; improve total system performance; and ensure that the system accommodates the characteristics of the user population that will operate, maintain, train, support, and, if applicable, manufacture it. Describe how the contractor will ensure that HSI cost and performance factors will be formally considered during analysis, design, and procedure development; during technical reviews (e.g., System

3 of 5 pages

Requirements Review, Systems Functional Review, Preliminary Design Review, Critical Design Review); and in the engineering change management process.

f. Human Systems Integration issues and risks. Describe the methods by which the contractor will identify, document, validate, prioritize, coordinate, track, report, and resolve or mitigate HSI issues and risks over the life of the program. Describe the process for trading off HSI issues and risks among HSI domains, and between HSI and other disciplines. Describe the process by which HSI risks will be elevated to formal program-level risk management status.

g. Human Systems Integration in subcontractor efforts. If subcontractors are responsible for work on hardware or software components that have operator, maintainer, or supporter interfaces, or other HSI efforts (e.g. serving as subject matter experts, performing trade studies), describe the subcontractor’s organization element responsible for HSI and the subcontractor’s HSI activities. Describe the process by which requirements for HSI will be levied upon subcontractors, implemented, and integrated across subcontractors for all HSI domains. Describe the method(s) by which the prime contractor will monitor subcontract compliance with HSI requirements.

h. Human Systems Integration in system analysis. Identify the HSI efforts in system analysis and the organization element(s) responsible for their conduct. Describe how

HSI will participate in analyzing, flowing down, aligning, and deriving requirements;

performing mission analysis; determining system functional requirements and capabilities; determining system architecture; allocating system functional requirements to humans, hardware, and/or software; developing system functional flows; and performing system effectiveness analyses, studies, and modeling. List the HSI analyses that will be performed to support system definition for all domains (e.g., manpower estimation, critical function analysis). For each analysis, (1) provide a description or a reference to the paragraph(s) where it is described elsewhere in the HSIPP or other document(s) and (2) identify any data, software, databases, models, or equipment required from the procuring agency.

i. Human Systems Integration in system design. Describe the HSI effort (for all applicable domains) in system design to ensure fulfillment with the requirements and guidance documents for HSI specified in the contract. Describe HSI participation in the preparation of system design and performance specifications; selection of commercial off-the-shelf or non-developmental items; trade studies and analyses; mock-up evaluations and dynamic simulations; usability assessments; tests; detailed drawing reviews; and system and program technical reviews. Describe the planned involvement of (and coordination to obtain) end-user personnel (e.g., operators, maintainers, trainers, and support personnel) in assessing the design, operation, maintenance, training, and support of the system. Describe and provide a rationale for the methodology and human performance criteria to be used.

j. Human Systems Integration in procedure development. Describe the HSI role in creating, reviewing, and validating procedures for users. This involves activities such as developing operator manuals, interactive electronic technical manuals, and training media.

k. Human Systems Integration in habitability. Describe the methods by which the contractor will analyze and meet habitability requirements, if any. Examples include requirements for the physical environment (e.g., adequate personnel work and living

4 of 5 pages space and environment control); for personnel services (e.g., medical and mess); and for living conditions (e.g., rest/housing, education, recreation, and personal hygiene) that have an impact on human performance contributions to system performance or affect the quality of life.

l. Human Systems Integration in personnel survivability. For systems with missions that require exposure to natural and combat threats, describe the methods by which the contractor will analyze and meet requirements for personnel survivability. Issues to be addressed include: protection from detection, fratricide, injury, and nuclear, biological, and chemical effects; the integrity of the crew compartment; life support equipment;

and provisions for rapid egress when the system is severely damaged or destroyed.

m. Human Systems Integration in manpower, personnel, and training (MPT). Describe the methods by which the contractor will analyze MPT constraints and requirements early in system acquisition and how the results will be used in the design process to meet manpower, personnel, and training requirements and KPPs. Include methods for the following, as applicable:

i. Analyses of tradeoffs among the numbers and aptitudes of personnel (e.g., active duty versus reserve, military versus civilian, contractor versus Department of

Defense), training, and system performance.

ii. Experience-level analysis.

iii. Manpower affordability analysis.

iv. Analysis of tradeoffs between system design and training requirements (e.g., user interface commonality, usability, and complexity versus human performance versus training costs).

v. Manpower and personnel estimation, analysis, and reporting.

vi. Estimates of the contributions of manpower, personnel, and training costs to the life cycle cost of operations and support.

vii. Analysis of training and media requirements, including options for individual, collective, and joint training for operators, maintainers and support personnel; and the use of training effectiveness evaluations.

viii. Plan for developing training materials, including options to use simulation, embedded training, distributed learning, or other techniques to acquire and maintain skills, reduce costs, and provide training flexibility.

n. Human Systems Integration in Environment, Safety, and Occupational Health (ESOH).

Describe the methods by which the contractor will analyze, prevent and/or control

ESOH hazards where possible and manage them when they cannot be avoided. Include plans for documenting and managing hazardous materials used in the system or system manufacturing, and for system demilitarization and disposal.

o. Human Systems Integration in Human Factors Engineering (HFE). Describe the methods by which the contractor will apply HFE principles, methods, criteria, best practices, and standards to ensure that operator, maintainer, trainer, support personnel, and, if applicable, manufacturer user interfaces are designed to improve both human and total system performance. Describe the HFE activities including analysis, design support, evaluation, and requirement verification not already described in paragraph 4.h.

5 of 5 pages

p. Human Systems Integration in test and evaluation. Describe HSI participation in test and evaluation and other verification activities as part of the contractor’s integrated test and evaluation program. Describe how (e.g., methods, metrics, and tools) and when the contractor will verify the design for compliance with HSI requirements. Identify the number and role(s) of HSI personnel who will support test and evaluation. Provide a summary schedule that depicts HSI tests, evaluations, and other verification activities

(inspections, analyses, and demonstrations) in support of program milestones.

q. Data sources. Identify contractor, industry, technical society, and government standards, handbooks, and other documents that will be applied to the HSI effort and activities and any proposed tailoring.

r. Human Systems Integration deliverable data products. Identify and briefly describe each HSI deliverable data product specified in the contract.

s. Time-Phase schedule and level of effort. Provide a milestone chart that identifies each separate HSI activity to be accomplished during the contract period of performance.

Include key HSI decision points and their relationship to the program milestones.

Provide information on the proposed number of personnel on an annual basis.

t. HSI program quality control. Describe the approach for assessing and reporting on the quality (relative success and progress) of the overall HSI effort and each HSI domain over the course of contract. Describe the approach for assessing the following contributors to HSI success: implementation of HSI policy and processes;

implementation of a human-centered design process; education and qualifications of

HSI personnel; HSI involvement in subcontractor requirements and selection;

availability and use of HSI tools; and HSI participation in verification.

5. End of DI-HFAC-81743A.

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

data_item: H001 title: Status Report sub:

auth: DI-MGMT-80368A ref: PWS 1.2.1.4, 1.2.1.10, 1.3.2.1 req_ofc: AFLCMC/HBDH dd250: LT appcode: N/A dist: D freq: Monthly asof: 5th firstsub: SEE BLK 16 subsub: Monthly addressee1: AFLCMC/HBDH draft1: 0 reg1: 1 repro1: 0 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 0 total_reg: 1 total_repro: 0 remarks: BLK 4: DID is tailored as follows:

In DID paragraph 3.2.1.a; delete “and percentage of completion of each task, technical instruction, or order”.

Delete DID paragraph 1.2.1.b in its entirety.

Delete DID paragraph 1.2.1.e in its entirety.

Delete DID paragraph 3.2.3 in its entirety.

Data to be provided on CD-ROM or the equivalent.

BLK 12: First delivery is required NLT thirty (30) calendar days after contract award and and by the 5th of each month thereafter.

BLK 14: Data to be provided on CD ROM or other approved media as authorized by the Government.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: H xtdp: Off xtm: Off othercat: ADMIN system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T15:27:43-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:19:17-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: H002 title: Contractor’s Configuration Management Plan (CCMP) sub:

auth: DI-SESS-80858D ref: PWS 1.2.1.5 req_ofc: AFLCMC/HBDH dd250: LT appcode: A dist: D freq: INITIAL/ANNUAL asof: N/A firstsub: SEE BLK 16 subsub: SEE BLK 16 addressee1: AFLCMC/HBDH draft1: 1 reg1: 1 repro1: 0 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 0 remarks: BLK 4: DID is tailored as follows: Contractor format is subject to government approval.

DI-SESS-80858D shall be used as a guide when developing the contractor format.

BLK 8: The government will require thirty (30) calendar days for review and/or verification that draft is in compliance with the PWS.

BLKs 10, 12 & 13: Contractor shall deliver draft CCMP one hundred (100) calendar days after contract award. Contractor shall deliver final CCMP thirty (30) calendars days after receipt of government's verification of the draft. Update annually.

BLK 14: Data to be provided on CD-ROM or other approved media as authorized by the Government.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: H xtdp: Off xtm: Off othercat: ADMIN system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T15:28:02-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:19:48-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: H003 title: Data Accession List (DAL) sub:

auth: DI-MGMT-81453B ref: 1.2.1.16.

req_ofc: AFLCMC/HBDH dd250: LT appcode: N/A dist: D freq: QRTLY asof: N/A firstsub: SEE BLK 16 subsub: SEE BLK 16 addressee1: AFLCMC/HBDH draft1: 0 reg1: 1 repro1: 0 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 0 total_reg: 1 total_repro: 0 remarks: BLK 4: DID is tailored as follows: Contractor format is acceptable.

BLK(s) 12 & 13: First delivery is required ten (10) calendar days after the end of the first quarter after contract award. Subsequent deliveries are required ten (10) calendar days after the end of each quarter thereafter.

BLK 14: Data to be provided on CD-ROM or other approved media as authorized by the Government.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: H xtdp: Off xtm: Off othercat: ADMIN system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T15:30:19-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:20:22-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: H004 title: Funds and Man-Hour Expenditure Report sub:

auth: DI-FNCL-80331A ref: PWS 1.7.1 req_ofc: AFLCMC/HBDH dd250: LT appcode: A dist: D freq: SEE BLK 16 asof: N/A firstsub: SEE BLK 16 subsub: SEE BLK 16 addressee1: AFLCMC/HBDH draft1: 0 reg1: 1 repro1: 0 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 0 total_reg: 1 total_repro: 0 remarks: BLK 8: The government will require fifteen (15) calendar days to review and/or verify the report is in compliance with the PWS.

BLK(s) 10, 12 & 13: The contractor shall submit this deliverable as directed by the PCO.

BLK 14: Data to be provided on CD-ROM or other approved media as authorized by the Government.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: H xtdp: Off xtm: Off othercat: ADMIN system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T15:29:54-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:20:55-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: H005 title: Management Plan sub:

auth: DI-MGMT-80004A ref: PWS 1.7 req_ofc: AFLCMC/HBDH dd250: LT appcode: A dist: F freq: INITIAL/ANNUAL asof: TBD firstsub: SEE BLK 16 subsub: SEE BLK 16 addressee1: AFLCMC/HBDH draft1: 1 reg1: 1 repro1: 0 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 0 remarks: Block 4: Tailor Data Item as follows: Contractor format is acceptable.

The Management Plan shall include all items specified in the DID unless otherwise tailored.

Para 2 of the DID: Change the format to the Microsoft Word layout.

BLK 8: The government will require fifteen (15) calendar days to review and/or verify the plan is in compliance with the PWS.

BLK(s) 10, 11, 12 & 13: The contractor shall submit this deliverable as directed by the PCO.

BLK 14: Data to be provided on CD-ROM or other approved media as authorized by the Government.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: H xtdp: Off xtm: Off othercat: ADMIN system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T15:31:54-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:21:27-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: H006 title: Integrated Logistics Support Plan (ILSP) sub:

auth: DI-ILSS-80095 ref: PWS 1.3.3 req_ofc: AFLCMC/HBDH dd250: LT appcode: A dist: D freq: INITIAL/ANNUAL asof: N/A firstsub: TBD subsub: TBD addressee1: AFLCMC/HBDH draft1: 1 reg1: 1 repro1: 0 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 0 remarks: BLK 4: DID is tailored as follows:

BLK 8: The government will require thirty (30) calendar days for review and/or verify each document submitted is in compliance with the PWS.

BLK(s) 12 & 13: Future reports shall be submitted in similar format as the original data item delivered under Rockwell International letter dated 5 Jul 95, Serial Number: F0192-MRP-003.

BLK 14: Data to be provided on CD ROM or other approved media as authorized by the Government.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: H xtdp: Off xtm: Off othercat: LOGISTICS system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T15:29:26-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:22:03-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: H007 title: Software Development Plan (SDP) sub:

auth: DI-IPSC-81427B ref: SEE REMARKS req_ofc: AFLCMC/HBDH dd250: LT appcode: A dist: D freq: AS REQ asof: N/A firstsub: TBD subsub: TBD addressee1: AFLCMC/HBDH draft1: 1 reg1: 1 repro1: 0 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 0 remarks: BLK 4: DID is tailored as follows: Format to be compatible with Microsoft Word.

IAW with DID paragraph 3, Contractor’s format is acceptable, with the DID being used as guidance only.

Software version numbering shall follow a four (4) segment format similar to Semantic Versioning Specification 2.0.0.

W.X.Y.Z numbering format (MAJOR.MINOR.PATCH.HOT FIX) shall be followed where:

W. - Defines a Major version change X. - Defines a Minor version change (added functionality/modifications to the major change) Y. - Defines a Patch version (maintenance/bug fixes) Z. - Defines a Hot Fix version (out of cycle fix/build) or build number

The SDP shall include the versioning number format details that define the numbering sequence.

BLK 5: PWS 1.2.1.4, 1.2.1.9, 1.2.5.2, 1.2.5.3 & 1.3.2.1, 1.3.2.2

BLK 8: The government requires thirty (30) calendar days to review and/or verify the draft is in compliance with the PWS.

BLK(s) 10, 12 & 13: The contractor shall submit a draft SDP as directed by the PCO.

The contractor shall submit the final SDP NLT fifteen (15) calendar days after receipt of the government’s verification of the draft.

BLK 14: Data to be provided on CD-ROM or other approved media as authorized by the Government.

group:

total_price:

prep_name:

line_item:

exhibit: H xtdp: Off xtm: Off othercat: TECHNICAL system: Scope Command Next Generation ctr_no:

contr:

remarksb: The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”.