SCNG_CDRL_EXHIBIT_B_SERIES.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

data_item: B003 title: Configuration Audit Plan (CAP) sub:

auth: DI-SESS-81646C ref: PWS 1.2.1.6 req_ofc: AFLCMC/HBDH dd250: LT appcode: A dist: D freq: AS REQ asof: N/A firstsub: TBD subsub: TBD addressee1: AFLCMC/HBDH draft1: 1 reg1: 1 repro1: 1 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 1 remarks: BLK 4: DID is tailored as follows: Contractor format is subject to government approval. DI-SESS-81646B shall be used as a guide when developing the contractor’s format.

BLK 8: The government will require thirty (30) calendar days to review and/or verify the draft is in compliance with the PWS.

BLK(s) 10, 12 & 13: The contractor shall deliver a two (2) part Configuration Audit Plan as directed by the PCO:

Part I shall address Functional Configuration Audits (FCA)s.

Part II shall address Physical Configuration Audits (PCA)s.

The contractor shall submit the final plan NLT fifteen (15) calendar days after receipt of the government’s verification of the draft.

BLK 14: Data to be provided on CD-ROM or other approved media as authorized by the Government.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: B xtdp: Off xtm: Off othercat: INSTALLATION system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T14:43:51-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:02:21-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: B004 title: Installation Control Drawings (ICD) sub:

auth: DI-DRPR-81242 NOT 1 ref: PWS 1.2.1.12 and 1.2.3.10 req_ofc: AFLCMC/HBDH dd250: LT appcode: A dist: D freq: SEE BLK 16 asof: N/A firstsub: TBD subsub: TBD addressee1: AFLCMC/HBDH draft1: 1 reg1: 1 repro1: 1 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 1 remarks: BLK 4: DID is tailored as follows: Paragraph 7.1; Delete “described by 3.3 of MIL-D-23140”

Paragraph 10.2; Delete “specified in MIL-D-23140” and replace with “conforming to ASME Y14.100 and para 6.5.1 of MIL-STD-3100A”.

Paragraph 10.3; Delete last sentence and replace with “Drawings shall meet production level criteria as specified in para 5.3.1.3 of MIL-STD-31000A."

BLK 8: Government will require thirty (30) calendar days to review and/or verify the technical/programmatic content is in compliance with the PWS.

BLK 9: Distribution authorized to Department of Defense and U.S. DoD contractors only. Other requests shall be referred to AFLCMC/HBDH.

BLK(s) 10, 12 & 13: The contractor shall submit this deliverable as directed by the PCO.

BLK 14: Data to be provided on CD ROM or other approved media as authorized by the Government. Both native CAD files (eg: AutoCAD and .dwg) and Portable Document Format (.pdf) files shall be included for all the drawings.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: B xtdp: Off xtm: Off othercat: INSTALLATION system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T14:44:48-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:03:24-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: B005 title: Telecommunication System Installation Plan (TSIP) sub:

auth: DI-MGMT-81118 NOT 1 ref: PWS 1.2.3.3 and 1.2.3.11 req_ofc: AFLCMC/HBDH dd250: DD appcode: A dist: D freq: SEE BLK 16 asof: N/A firstsub: TBD subsub: TBD addressee1: AFLCMC/HBDH draft1: 1 reg1: 1 repro1: 1 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 1 remarks: BLK 8: The government will require thirty (30) calendar days to review and/or verify the draft is in compliance with the PWS.

BLK(s) 10, 12 & 13: The contractor shall deliver the plan as directed by the PCO.

The contractor shall submit the final NLT fifteen (15) calendar days after receipt of the government's verification of the draft.

BLK 14: Data shall be provided on CD-ROM, in .dwg format or other approved media as authorized by the Government.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: B xtdp: Off xtm: Off othercat: INSTALLATION system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T14:45:45-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:04:02-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0

DATA ITEM DESCRIPTION

Title: Site Preparation Requirements and Installation Plan

Number: DI-MGMT-80033A Approval Date: 30 OCT 2006 AMSC Number: 7617 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/DA02 Applicable Forms: N/A

Use/relationship:

The Site Preparation Requirements and Installation Plan defines requirements and responsibilities for the coordinated, integrated Government and contractor site preparation and installation efforts of the deliverable end product(s).

This Data Item Description (DID) contains format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

This DID may be applied in any program phase and contract which contains Site preparation requirements.

This DID supersedes DI-MGMT-80033.

Requirements:

1. Reference documents. None.

2. General. The following general instructions shall apply to the Site Preparation Requirements and Installation Plan:

a. Text – Typewritten or by such other office composition machine(s) as may be available, provided no additional cost is incurred by the Government for such method of preparation and the delivered plan can be reproduced by standard office copying equipment.

b. Diagram/Drawing – Be in accordance with the contractor’s standard engineering drawing practices.

Source: http://assist.dla.mil -- Downloaded: 2021-06-10T15:21Z Check the source to verify that this is the current version before use.

b. A site layout plan including detailed layouts (placement) of all equipment, racks

DI-MGMT-80033A

c. Illustration/Graphs – Illustrative material, e.g., charts, graphs, photographs, sketches, etc., shall be in accordance with the contractor’s normal methods for such data.

d. Legibility – The complete plan, including appendices, attachments, illustrations, graphics, etc., shall be clear, legible and reproducible.

3. Format. The plan shall be in Contractor’s format.

4. Content. Contents of the plan shall include the following as applicable:

a. A detailed description by major subheadings, of all installation work to be done by the contractor at the site, to include scheduling and dependency of the various tasks.

, cabinets and console.

c. General equipment specification to include:

1. Physical specifications – height, length, width, and weight (floor loading) of each equipment rack, cabinet and console.

2. Equipment rack, cabinet and console template.

3. Manufacturer’s specific machine configuration and space requirements.

4. Maintenance access requirements for each equipment, rack cabinet and console.

5. Special operational line-of-sight requirements between various equipment.

d. A lighting plan to include general and special lighting requirements.

e. A site and/or facility construction section detailing all required structural modifications or additions plans.

f. An electrical power utilization section to include requirements plans for:

1. Input voltages, frequency, and tolerances.

2. Grounding.

3. KVA required for each rack, cabinet and console and the type of termination to government’s poser supply, cable connections, terminal strip, etc.

4. Phasing number and color code of conductors per cabinet.

5. Location of power and signal entry points and their respective hole sizes.

6. Generator and control cabinet dimensions and specifications, control wiring and emergency off requirements.

g. A section containing the plans for an equipment inter-unit cabling, wave guide and wiring, and lists.

h. A cooling section containing plans which show facility and equipment air conditioning requirements, water requirements, and any special cooling requirements, to include:

1. Operating areas environmental conditions:

(a) Temperature range

(b) Relative humidity range (c)Atmospheric pressure

2. Equipment air conditioning requirements which shall specify:

(a) Type of air conditioning required, i.e., ambient or forces air. If forced air is indicated, required static air pressure shall be specified.

(b) Type of air carrier, i.e., sub floor or overhead duct

(c) Location of each equipment rack, cabinet and console of the required overhead ducts of sub floor opening and their respective sizes.

(d) Equipment operating and non-operating environmental conditions, e.g., temperature, atmospheric pressure and relative humidity

3. Operating requirements and capabilities of air conditioning equipment to include:

(a) Temperature range

(b) KVA

(c) BTUs

(d) C.F.M./each, temperature, relative humidity range

i. Shipping requirements and related information to include:

1. Names of time span of contractor personnel to be used at the installation site to ascertain delivery routes, dock facilities and to perform equipment installation.

2. Special requirements for on-site movement of equipment/systems.

5. END OF DI-MGMT-80033A

DATA ITEM DESCRIPTION

Requirements:

Source: http://assist.dla.mil -- Downloaded: 2021-06-10T15:37Z

Title: CONFIGURATION AUDIT PLAN

Number: DI-SESS-81646C Approval Date: 20200211

AMSC Number: N10148 Limitation: N/A

DTIC Applicable: No GIDEP Applicable: No

Preparing Activity: NM Project Number: SESS-2020-011

Applicable Forms: N/A

Use/relationship: The Configuration Audit Plan provides information required for conducting

Functional Configuration Audits (FCA) and Physical Configuration Audits (PCA).

a. This DID contains the format, content, and intended use information for the data deliverable resulting from the work task described in EIA-649-1 and the principles of EIA-649 (Copies of these standards are available online at www.sae.org or from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel 877-606-7323 [inside USA and Canada] or 724-776-4970 [outside

USA]). It is not intended that all the requirements contained herein should be applied to all configuration audits. Portions of this DID are subject to tailoring, depending on the scope of the particular audit.

b. This DID supersedes DI-SESS-81646B.

Requirements:

1. Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. Format. The Configuration Audit Plan shall be in contractor format unless otherwise designated in the contract.

3. Content. The Configuration Audit Plan shall include the following data.

3.1. Purpose of the Audit. State the purpose and objectives of the audit in terms of the contract requirement for the audit.

3.2. Hardware Configuration Items (HWCI) to be Audited. Identify each HWCI by:

a. Nomenclature.

b. Specification identification number.

c. Serial number.

d. Other application identification numbers.

DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

Source: http://assist.dla.mil -- Downloaded: 2021-06-10T15:52Z http://www.sae.org/

DI-SESS-81646C

3.3. Computer Software Configuration Items (CSCI) to be Audited. Identify each CSCI by:

a. Software title.

b. Code identification number.

c. Software inventory numbering system.

d. Specification identification number.

e. Other applicable identification numbers.

f. Software Development Plan or Software Project Management Plans review.

3.4. Information Items to be Audited. Identify the following as applicable:

a. Engineering drawings.

b. Applicable specifications.

c. Engineering change proposals.

d. Test plans and procedures.

e. Operating and support manuals.

f. Configuration documentation release procedures.

g. Quality assurance documentation and procedures.

h. Requests for variance (deviation and waivers).

i. Software descriptions flow charts, manuals, and lists.

j. Digital models.

3.5. Reference Materials. Identify the following supporting documentation as applicable:

a. Systems engineering technical data.

b. Trade study results.

c. Producibility analysis results.

d. Risk analysis results.

e. Reports.

f. Hardware and software mockups.

g. Variance (deviation and waiver) lists.

h. Minutes of related prior reviews.

i. Verification and Validation results.

3.6. Scope of Audit. Include the following:

a. Summary of the hardware and software contractual requirements against which the audit will be conducted as specified in work statements, specifications, and approved plans.

b. Outline of the proposed audit procedure for each item to be audited.

3.7. Location(s) and Date(s). Identify proposed date(s) and location(s) for the audit(s).

DI-SESS-81646C

3.8. Team Composition. Identify:

a. Contractor representatives and their function in the audit.

b. Proposed Government participation and functions in the audit.

3.9. Administrative Requirements. Include:

a. Description of facilities and support equipment to be used in the audit.

b. Administrative support to be used in the audit.

c. Security requirements to support the audit.

d. Metrics and Reports.

End of DI-SESS-81646C

Installation Control Drawings

DI-DRPR-81242, dated 18-Oct-1991, has been reviewed and determined to be valid for use in acquisition.

Reviewer Activities:

Air Force - 27

NOTICE OF

VALIDATION

DI-DRPR-81242

NOTICE 1

15-Jan-2021

NOTE: The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.

AMSC N/A AREA DRPR

Preparing Activity:

Navy - SH

Source: http://assist.dla.mil -- Downloaded: 2021-10-25T16:35Z https://assist.dla.mil

Source: http://assist.dla.mil -- Downloaded: 2021-06-10T15:56Z

Source: http://assist.dla.mil -- Downloaded: 2021-06-10T15:56Z

CANCELLATION

DI-MGMT-81118

NOTICE 1

13May2016

TELECOMMUNICATION SYSTEM INSTALLATION PLAN

DI-MGMT-81118, Telecommunication System Installation Plan, is hereby cancelled without replacement.

Preparing activity:

Army - AM

Project Number

MGMT-2016-034

AMSC N/A AREA MGMT

CANCELLATION

Source: http://assist.dla.mil -- Downloaded: 2021-10-25T16:34Z https://assist.dla.mil/

Source: http://assist.dla.mil -- Downloaded: 2021-06-10T16:01Z

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: B001 title: Site Preparation Requirements and Installation Plan sub:

auth: DI-MGMT-80033A ref: PWS 1.2.3.3, 1.2.3.4, and 1.4.2 req_ofc: AFLCMC/HBDH dd250: LT appcode: A dist: C freq: SEE BLK 16 asof: N/A firstsub: SEE BLK 16 subsub: SEE BLK 16 addressee1: AFLCMC/HBDH draft1: 1 reg1: 1 repro1: 0 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 0 remarks: BLK 4: Contractor format is acceptable.

BLK 8: The government will require thirty (30) calendar days to review and/or verify the draft is in compliance with the PWS.

BLK(s) 10, 12, & 13: Contractor shall deliver one (1) draft and one (1) final copy of the Site Preparation Requirements and Installation Plan as directed by the PCO.

The draft shall consist of 100% complete data and shall be delivered by the contractor forty five (45) calendar days after completion of the site survey or as directed by the PCO.

If multiple site surveys are performed as part of a combined site survey trip, the first station data will be submitted in forty five (45) calendar days after the survey team returns to the Contractor’s facility (or as directed by the PCO). Data for the subsequent stations on the trip will be due every twenty one (21) calendar days (or as directed by the PCO) until data for each station surveyed has been submitted.

Sequencing of data submittals will be determined by the government prior to returning to the Contractor’s facility.

The final submittal shall be delivered by the contractor thirty (30) calendar days after receipt of the government’s verification of the draft.

BLK 14: Data shall be submitted on CD-ROM, the equivalent in .dwg format or other approved media as authorized by the Government.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: B xtdp: Off xtm: Off othercat: INSTALLATION system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T14:42:14-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:01:20-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: B002 title: Software Installation Plan sub:

auth: DI-IPSC-81428A ref: PWS 1.2.5.3 req_ofc: AFLCMC/HBDH dd250: LT appcode: A dist: D freq: AS REQ asof: N/A firstsub: TBD subsub: TBD addressee1: AFLCMC/HBDH draft1: 1 reg1: 1 repro1: 0 addressee2:

draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 0 remarks: BLK 4: DID is tailored as follows: Format to be compatible with Microsoft Word.

IAW with DID paragraph 3, Contractor’s format is acceptable, with the DID used as guidance only.

BLK 8: The government will require thirty (30) calendar days to review and/or verify the draft is in compliance with the PWS.

BLK(s) 10, 12 & 13: The contractor shall submit the Software Installation Plan as directed by the PCO.

The contractor shall submit the final NLT fifteen (15) calendar days after receipt of the government’s verification of the draft.

BLK 14: Data to be provided on CD ROM or other approved media as authorized by the Government.

The Contractor shall provide a completed copy of the certification required by DFARS 252.227-7017, “Identification and Assertion of Use, Release, or Disclosure Restrictions”. Furthermore, the cover page of any delivered CDRL shall contain the Special License Rights restrictive markings prescribed by DFARS 252.227-7013 and 252.227-7014 or the Government Purpose Rights restricted markings prescribed by DFARS 252.227-2013 and 252.227-7014. The Contractor shall also physically attach a copy of the applicable commercial technical data or computer software delivered as part of this CDRL.

group:

total_price:

prep_name:

line_item:

exhibit: B xtdp: Off xtm: Off othercat: INSTALLATION system: Scope Command Next Generation ctr_no:

contr:

remarksb:

Page2:

Reset:

2021-10-04T14:43:04-0500

JENSEN.MATTHEW.DAVID.1270355958

prep_date:

app_by:

2021-10-22T10:01:52-0500

FREDERICK.TRACY.LYNN.1097389817

app_date:

Page:

of_pages:

app: Adobe Professional 8.0