RFQ Cleanroom and air handling.docx

DOCX document 48 KB Posted

Attached to
Cleanroom and Air Handling Equipment
Solicitation number
NB687000-26-00880
Issued by

About this file

This is a Request for Quotation (RFQ) issued by the National Institute of Standards and Technology (NIST), Acquisition Management Division, for Cleanroom and Air Handling Equipment under solicitation number NB687000-26-00880. The procurement is a total small business set-aside with a NAICS code of 334516 (Analytical Laboratory Instrument Manufacturing) and a small business size standard of 1,000 employees. The requirement consists of one line item (CLIN 0001) for cleanroom and air handling equipment on a firm-fixed-price, lump-sum basis with FOB Destination. All shipping and delivery costs must be included in the total quoted price. Quotations are due electronically by 5:00 PM Eastern Time on March 23, 2026, and must be submitted to Contracting Officer Angela Hitt at Angela.Hitt@nist.gov with the RFQ number referenced in the subject line. Questions must be submitted in writing to the same contact no later than 5 calendar days after the solicitation issuance date.

Quotations must be submitted in three separate volumes: Volume I (Technical Quotation addressing technical capability and proposed equipment specifications with citations to requirements), Volume II (Price Quotation including the firm-fixed price and any applicable discounts), and Volume III (Terms and Conditions). Technical quotations must include up to three examples of relevant past performance from the last three years with similar scope, size, and complexity. Quoters must maintain an active SAM.gov registration at submission and throughout contract performance. The Government will evaluate quotations based on technical capability (most important—no used or refurbished equipment will be considered), past performance (rated as high, some, low, or neutral confidence), and price reasonableness. The Government reserves the right to award without discussions based on initial quotations and will issue a binding purchase order upon notice of award to the selected quoter.

View the file

Other files

File Type Posted
Copy of Attchment 4- Answers to questions Cleanrooms NIST_.xls XLS spreadsheet
Windows_cleanspace.pdf PDF
LabSpaceFloorPlan.pdf PDF
Cleanspace_top_side.pdf PDF
Outlets_clenspace.pdf PDF
Hallway_floorplan.pdf PDF
RFQ Cleanroom and air handling.docx DOCX document
Attch 3- Past Performance Questionnaire (2).pdf PDF
Attch 2 Provisions and Clauses.docx DOCX document
Statement of Req and floor plan.pdf PDF
Attch 4- Questions and Ansers.xls XLS spreadsheet
Show all 11

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Cleanroom and Air Handling Equipment NB687000-26-00880

(I) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in part 12 - Acquisition of Commercial Products and Commercial Services as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation will not be issued.

(II) The solicitation number is NB687000-26-00880 and this solicitation is a Request for Quotation (RFQ). This acquisition is being solicited total small business set-aside.

(III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2025-06 dated 10/01/2025, and the Revolutionary FAR Overhaul (RFO), supplemented by Department of Commerce Acquisition Policy.

(IV) The associated North American Industry Classification System (NAICS) code for this procurement is NAICS #334516 – Analytical Laboratory Instrument Manufacturing with a small business size standard of 1,000.

(V) All quoters shall provide a firm-fixed-price quotation for the following line item(s):

Contract Line-Item Number (CLIN)
QTY
UNIT
UNIT PRICE
APPLICABLE DISCOUNTS
TOTAL
CLIN 0001 – Cleanroom and Air Handling Equipment IAW Attachment #1 Statement of Requirements to include and all shipping costs in Firm-fixing Pricing. (FOB Destination)
1
LS

TOTAL:

(VI) The requirements for the line items to be acquired above are in the attached Statement of Requirements document.

Attachment #1: Statement of Requirements Attachment #2: Applicable Provisions and Clauses

(VII) Date(s) and place(s) of delivery and acceptance and FOB point are required in accordance with the attached Statement of Requirements document.

(VIII) Quoters/Contractors must possess an ACTIVE registration in the System for Award Management system, www.SAM.gov, when submitting a quotation and shall continue to be registered until time of award, during performance, and through final payment of any contract resulting from this solicitation. The Contracting Officer shall confirm that quoters have an “active” registration at the www.sam.gov website upon receipt of the quotation. If the SAM.gov registration is not active, the quotation will not be considered for award

(IX) The provision at FAR 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services (DEVIATION Jan 2026), applies to this acquisition. See Addendum to FAR 52.212-1 below.

Addendum to FAR 52.212-1, Instructions to Offerors – Commercial Products and Commercial Services (DEVIATION Jan 2026):

DUE DATE FOR QUOTATIONS

Quoters shall submit their electronic quotations, via email, so that NIST receives them not later than 5:00 PM Eastern Time, MARCH 23, 2026. E-mail quotations shall be submitted directly to the Contracting Officer Angela Hitt at Angela.Hitt@nist.gov.

Please reference the RFQ number in the subject line of all email communications. Quotations shall not be deemed received by the Government until the quotation is received in the e-mail inbox set forth above.

INQUIRIES:

Quoters must submit all questions concerning this solicitation in writing to the Contracting Officer, Angela Hitt at Angela.Hitt@nist.gov. Please use Attachment 4 – Questions and Answers for question submissions. Questions should be received no later than 5 calendar days after the issuance date of this situation. All responses to timely submitted questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the responses included in the amendment to the solicitation will be deemed as the Government’s formal response and govern performance of the contract.

QUOTATION PREPARATION INSTRUCTIONS:

All quotations shall conform to solicitation provisions/clauses and be prepared in accordance with this section. The quotation shall be clearly and concisely written as well as be neat and logically assembled. All pages of the quotation shall be appropriately numbered.

The Quoter’s quotation shall be clearly divided into the following distinct volumes:

Volume I – Technical Quotation Volume II – Price Quotation Volume III- Terms and Conditions

Volume I - Technical Quotation:

The Quoter shall submit one (1) copy of their technical quotation, electronically, via E-mail to the Contracting Officer identified above. The technical quotation shall address the following:

Technical Capability:

The quoter shall submit technical approach and capability documentation which may include a narrative, charts, graphs, tables, drawings, product / service literature, and as applicable, demonstrated authority to provide the necessary items and perform the required services identified in the Statement of Requirements (Attachment 1). The documentation shall clearly describe, in sufficient detail, the vendor's authority, proposed items, resources and methods to successfully fulfill the requirements including specifications, performance capability requirements, delivery schedules, warranties, and all service requirements. The submission shall clearly identify each line item above. The submission must demonstrate that the proposed system meets or exceeds each minimum requirement described within the attached statement of requirements document by providing a citation between the statement of requirements paragraph and the relevant section of the technical description or product literature. The quoter must not simply state they will meet or exceed the requirement; evidence must be provided. If applicable, evidence that the quoter is authorized by the manufacturer to provide the item(s) in the quotation shall be included.

Past Performance:

The quoter shall submit up to three examples of relevant past performance performed within the last three years. Examples should be of work similar in scope, size and complexity to this requirement. The description of each reference described in this section shall not exceed one single-sided page. For each of the contracts, the quoter shall provide the following information:

· Contract number

· Client’s name and address

· Total contract value

· Period of performance

· Identification of role played by quoter (i.e., Prime Contractor, Subcontractor, etc.)

· Narrative describing the requirement and its relevance to the current requirement

· Name of contracting officer or point of contact, telephone number and e-mail address

The quoter is encouraged to focus on prior projects encompassing the same RFQ requirements and describe how these requirements were specifically supported by the quoter. The quoter may use prior experiences in which they served as a prime contractor or subcontractor; however, past performance as a prime contractor may instill higher confidence. Attachment 3 – Past Performance Questionnaire is provided.

Volume II - Price Quotation:

The quoter shall submit one (1) copy of their entire quotation, electronically, via E-mail to the Contract Specialist and Contracting Officer identified above. The price quotation shall address, at minimum, the following information.

a) The solicitation number

b) The name, phone number, and email address of the quoter's/contractor’s point of contact

c) Unique Entity Identifier # for quoter's/contractor’s active SAM.Gov registration

d) A firm fixed price for each required line item, including a unit price and total amount where applicable, and the aggregate quoted firm fixed price for the requirement. Where the Government has identified a line item as requiring a Not to Exceed price, quoters shall comply with this

e) Shipping and Delivery costs must be included in the quotation contained in the total price of the quote. The quotation shall include a total firm fixed price for the requirement that includes all shipping/delivery costs

f) Any applicable discount terms.

Volume III – Terms and Conditions:

The quoter shall review the provision and clauses attachment and complete any required information as record via a separate volume response to this solicitation.

Note: System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in this solicitation. Contracting officers will rely on representations from offers based on provisions in the solicitation. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

Acceptance of Terms and Conditions:

If the contractor objects to any of the terms and conditions contained in this solicitation, the contractor shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the contractor to identify in their quotation any exceptions to the terms and conditions of the solicitation. If the contractor does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Contractor's acceptance of the Government's terms and conditions for inclusion into the resultant purchase order (PO).

Note: This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a quoter submits a quotation based upon an FSS or GWAC contract, the Government will accept the proposed price. However, the terms and conditions stated herein will be included in any resultant purchase order, not the terms and conditions of the Quoter’s FSS or GWAC contract, and the statement required above shall be included in the quotation.

FAR 52.212-2 Evaluation- Commercial Products and Commercial Services (DEVIATION Jan 2026)

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the Offeror responsible whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

The Government intends to award a single firm fixed purchase order (PO) from this solicitation utilizing simplified acquisitions procedures in accordance with FAR part 12 of the Revolutionary FAR Overhaul. The Government reserves the right not to award a PO and to make an award without discussions based solely upon initial quotes.

Basis for Award:

The Government will make an award to the quoter with the proposed solution that is most advantageous to the Government, price and non-price factors considered. The evaluation factors shown below in descending order of importance will be used to evaluate quotations.

A quoter's failure to address any factor may be considered indicative of the quoter's lack of understanding of the Government's requirements and may result in the quotation being determined unacceptable.

Evaluation Factors:

Technical Capability: No prototypes, demonstration models, used or refurbished instruments will be considered. Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate the extent to which the quoter has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If a quoter’s technical description and/or product literature does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not meet the requirements.

Past Performance: The Government will evaluate the quoter’s record of past performance to assess the confidence level it has in the quoter’s ability to successfully perform the requirements in the solicitation. Performance on projects within the last 3 years of similar size, scope, and complexity to the requirements will be considered.

High Confidence
The Government has high confidence that the Quoter understands the requirement, proposes a sound approach, and will be successful in performing with little or no Government intervention.
Some Confidence
The Government has some confidence that the Quoter understands the requirement, proposes a sound approach, and will be successful in performing with some Government intervention.
Low Confidence
The Government has low confidence that the Quoter understands the requirement, proposes a sound approach or will be successful in performing even with Government intervention.

The government reserves the right to consider past performance data obtained from sources other than those provided by quoter, in the quotation. If a quoter does not have a record of recent and relevant past performance, they will not be evaluated favorably or unfavorably but will receive a 'Neutral' rating.

Price: The proposed price will be evaluated. The evaluation will determine whether the proposed prices are reasonable in relation to the solicitation requirements. Prices must be entirely compatible with the technical portion of the quotation.

(b) Options (if applicable). The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(c) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

Attachments:

Attachment 1- Statement of Requirements Attachment 2-Provisions and Clauses Attachment 3- Past Performance Questionnaire Attachment 4- Question and Answer

File details come from the government source that posted it. Updated .