2423_Amendment_No._0007.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

RFP NO. N62478-14-R-2423, GROUNDS AND TREE MAINTENANCE SERVICES AT JOINT BASE PEARL HARBOR-HICKAM (JBPHH), HAWAII

THE REVISED PROPOSAL RECEIPT DATE IS MAY 12, 2014, 2:00 PM, HST.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 06-May-2014

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N62478-14-R-2423

X 9B. DATED (SEE ITEM 11)

20-Mar-2014

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

06-May-2014

CODE

NAVFAC HAWAII

SERVICES ACQUISITION DIVISION (PRJ233)

400 MARSHALL ROAD

JBPHH HI 96860-3139

N62478 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N62478-14-R-2423

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

Summary of Changes

Attachment 0200000-07

Delete Attachment 0200000-07 in its entirety and replace with the attached pages 1 through 53 (Amendment 0007).

Attachment 0200000-08

Delete Attachment 0200000-08 in its entirety and replace with the attached pages 1 through 50 (Amendment 0007).

Attachment 0200000-09

Delete Attachment 0200000-09 in its entirety and replace with the attached pages 1 through 50 (Amendment No. 0007).

Attachment 0200000-10

Delete Attachment 0200000-10 in its entirety and replace with the attached pages 1 through 50 (Amendment No. 0007).

Attachment 0200000-11

Delete Attachment 0200000-11 in its entirety and replace with the attached pages 1 through 50 (Amendment No. 0007).

Electronic Offeror Pricing Schedule

Replace all previous versions with the “14-2423 Offeror Pricing Schedule AMD 0007.” Offerors shall use “14-2423 Offeror Pricing Schedule AMD 0007” when submitting proposal.

ATTACHMENT 0200000-07

EXHIBIT LINE ITEM NUMBERS

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

Quantity Unit

A001 CNRH

A001AA Prestige (Bldg 1102 CYOH & between G & I Wing entrance; and 12 MO $ $

Missing Man Formation adjacent to the Officer's Club) (63,370sf)

A001AB COL3 AM2 (CDCs) (328,485sf) 12 MO $ $

A001AC NOT USED 12 MO $ N/A $ N/A

A001AD NOT USED 12 MO $ N/A $ N/A

A001AE Canal Maintenance (11,160lf) 12 MO $ $

A001AF COL4 AM2 (13,075,820sf) 12 MO $ $

A001AG Tree Maintenance - Palmaceous Only (4,200,540sf) 12 MO $ $

A001AH COL3 Base (4-Star) (51,500sf) 12 MO $ $

A001 Total $ 0.00

A002 15 MDG

A002AA Prestige (172,000sf) 12 MO $ $

A002AB COL3 AM2 12 MO $ N/A $ N/A

A002AC NOT USED 12 MO $ N/A $ N/A

A002AD NOT USED 12 MO $ N/A $ N/A

A002AE Canal Maintenance 12 MO $ N/A $ N/A

A002AF COL4 AM2 12 MO $ N/A $ N/A

A002AG Tree Maintenance - Palmaceous Only 12 MO $ N/A $ N/A

A002 Total $ 0.00

A003 GSA

A003AA Prestige 12 MO $ N/A $ N/A

A003AB COL3 AM2 (3,983sf) 12 MO $ $

A003AC NOT USED 12 MO $ N/A $ N/A

O F

F E

R O

R P

R O

P O

S E

D U

N

IT

P R

IC

E

E n te r p ro p o se d u n it p ri ce i n t h is c o lu m n

P ri ce w il l au to m at ic al ly c o p y t o t h e

U N

IT

P R

IC

E c el l ro u n d ed t o t w o d ec im al p la ce s.

Line Item 0001 Base Period - Firm Fixed-Price Work

PROVIDE PRICES TO PERFORM FIRM FIXED-PRICE WORK IN ACCORDANCE WITH SECTION C, SPEC ITEM 3

Exhibit

Line Item

No.

Supplies/Services (1)

Pricing for Firm Fixed-Price Work

Unit Price Total Amount

14-14-2423

Attachment 0200000-07 Page 1 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

Quantity Unit

A003AD NOT USED 12 MO $ N/A $ N/A

A003AE Canal Maintenance 12 MO $ N/A $ N/A

A003AF COL4 AM2 12 MO $ N/A $ N/A

A003AG Tree Maintenance - Palmaceous Only 12 MO $ N/A $ N/A

A003 Total $ 0.00

$ 0.00TOTAL FFP LINE ITEMS A001 THROUGH A003

Exhibit

Line Item Supplies/Services

(1) Pricing for Firm Fixed-Price Work

Unit Price Total Amount O F

F E

R O

R P

R O

P O

S E

D U

N

IT

P R

IC

E

E n te r p r o p o se d u n it p r ic e i n t h is c o lu m n

P r ic e w il l a u to m a ti c a ll y c o p y t o t h e U

N

IT

P R

IC

E c e ll r o u n d e d t o t w o d e c im a l p la c e s.

Attachment 0200000-07 Page 2 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

Line Item 0002 Base Period- Indefinite Delivery Indefinite Quantity Work

PROVIDE UNIT PRICES FOR INDEFINITE DELIVERY INDEFINITE QUANTITY WORK IN ACCORDANCE WITH 1503050 SECTION C, SPEC ITEM 4

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

A700 --- Composite Hourly Rate

Work: Grounds Planting and Maintenance Work (2)

Composite Hourly Rate Work shall be based on labor hours. Provide labor for grounds maintenance composite hourly rate work. Labor hours shall be based on the productive hours expended on the site for the performance of the work.

175 HR

A701 --- Composite Hourly Rate

Work: Tree

Planting/Pruning/

Maintenance Work (2)

Composite Hourly Rate Work shall be based on labor hours. Provide labor for tree planting/pruning/maintenance composite hourly rate work. Labor hours shall be based on the productive hours expended on the site for the performance of the work.

75 HR

A702 --- Composite Hourly Rate

Work: Irrigation System

Maintenance Work (2)

Composite Hourly Rate Work shall be based on labor hours. Provide labor for irrigation system maintenance composite hourly rate work. Labor hours shall be based on the productive hours expended on the site for the performance of the work.

75 HR

A703 --- Composite Hourly Rate

Work: Direct material costs to support ELIN

A700, A701 and A702(3)

Composite Hourly Rate Work. Provide material for composite hourly rate work. The Contractor will be compensated the direct cost of materials.

2,500 EA 1.0000 $2,500.00

A704 --- Special Events and Urgent

Response Work Surcharge

Surcharge unit price to be added to each order requiring response as special events and urgent work. Included in this category are work requirements in preparation for special events; i.e., parades, Change of

Command ceremonies, and requests by Admiral or Flag personnel.

Respond and be on the job site within 24 hours after issuance of an order and complete work within 48 consecutive hours after issuance of the order.

40 EA

O F

F E

R O

R P

R O

P O

S E

D U

N

IT

P R

IC

E

E n te r p ro p o se d u n it p ri ce i n t h is c o lu m n P ri ce w il l au to m at ic al ly c o p y t o t h e U

N

IT

P R

IC

E ce ll r o u n d ed t o f o u r d ec im al p la ce s.

Attachment 0200000-07 Page 3 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

A705 --- Emergency Response

Work Surcharge

Surcharge unit price to be added to each order requiring response as emergency work. Included in this category are work requirements classified as emergency when the work consists of correcting items which constitute an immediate danger to personnel and equipment, threaten to damage property, or preclude fulfillment of station operational requirements. Respond and be on the job site within two hours after issuance of an order. Work continuously without interruption and arrest the emergency condition. Prior to leaving the job site, ensure that the job site, including surrounding areas affected by the emergency work is habitable, safe, sanitary, and secured. If further work is required after the emergency condition is arrested, continue the work no later than the following workday and prosecute continuously until the work is completed.

10 EA

A706 --- Mowing, Trimming, and

Edging

Mow and trim grass to a uniform height of 2 inches. Trim grass areas along edge of buildings; around trees, shrubs, planter/shrub beds, cultivated areas, poles, walls, fences, sprinkler heads, valves and other obstructions to match the height and appearance of surrounding cut grass.

Edge where grass meets any concrete or asphalt surface, where grass abuts planter beds, or wherever needed to maintain grass delineation. Remove vegetation (e.g., grass, weed, vine, unwanted growth) adhering to or protruding through fences and walls. Remove and dispose all clippings and trimmings. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. 500,000 SF

A707 --- Grass Cutting Cut grass to a uniform height of 4 to 6 inches. Remove and dispose all clippings. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

250,001 SF

A708 --- Shrub, Bush, or Cultivated

Plant Pruning

Prune shrubs, bush, and cultivated plants to a uniform, well shaped appearance and to prevent interference with pedestrians, vehicular traffic, and building encroachment. Remove and dispose all clippings and debris.

Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. 100 EA

A709 --- Hedge Pruning Prune hedges to a uniform, well shaped appearance and to prevent interference with pedestrians, vehicular traffic, and building encroachment.

Remove and dispose all clippings and debris. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

1,116 LF

Attachment 0200000-07 Page 4 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

A710 --- Plant and Bed Cultivating Cultivate plants and beds to provide a neat appearance and promote plant health. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

2,500 SF

A711 --- Watering (Irrigation) Irrigation should be applied to the needs of the specific plant. Contractor to determine minimum amount of water required to keep plants green and healthy, e.g., evapotranspiration rates. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

10,000 SF

A712 --- Fertilizing Fertilize vegetation in a manner that promotes health, growth, color and appearance. Apply fertilizer in accordance with the manufacturer's printed instructions. The Government may determine fertilizer type on soil analysis test results of the respective area, adjacent area, or similar areas.

Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. 2,500 SF

A713 --- Lawn and Garden Pest

Control: Lawn

Eradicate disease, parasites, insect and fungus on vegetation. Application of appropriate pesticide in accordance with the manufacturer's printed instructions. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

10,000 SF

A714 --- Lawn and Garden Pest

Control: Shrub, Bush, or

Cultivated Plant

Eradicate disease, parasites, insect and fungus on vegetation. Application of appropriate pesticide in accordance with the manufacturer's printed instructions. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

10 EA

A715 --- Lawn and Garden Pest

Control: Hedge

Eradicate disease, parasites, insect and fungus on vegetation. Application of appropriate pesticide in accordance with the manufacturer's printed instructions. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

2,500 LF

Attachment 0200000-07 Page 5 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

A716 --- Herbiciding: Broadcast

Treatment

Herbicide to eliminate unwanted growth. Cut all treated vegetation flush to the finished grade after it dies and dispose. Remove vegetation (e.g., grass, weed, vine, unwanted growth) adhering to or protruding through fences and walls. Apply herbicide over the entire maintenance area.

Quantity specified is that of the entire maintenance area. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

75,000 SF

A717 --- Herbiciding: Basal (Spot)

Treatment

Herbicide to eliminate unwanted growth. Cut all treated vegetation flush to the finished grade after it dies and dispose. Remove vegetation (e.g., grass, weed, vine, unwanted growth) adhering to or protruding through fences and walls. Spot apply herbicide on unwanted growth within a maintenance area. Quantity specified is the total of the actual areas to receive treatment. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. 20,000 SF

A718 --- Brush/Grass Cutting Cut brush, small trees (3 inches and less in diameter at ground level), shrubs, grass, weed, and other similar growth to a uniform height between

4 and 6 inches. Remove vegetation (e.g., grass, weed, vine, unwanted growth) adhering to or protruding through fences and walls. Remove all debris. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. 15,000 SF

A719 --- Debris Removal Remove and dispose litter and debris. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

15,000 SF

A720 --- Overgrown-Grass Cutting Cut overgrown grass, including but not limited to, grass, weed, and other similar growth to a uniform height between 4 and 6 inches. The height of the overgrowth may vary between one foot and six feet high. Remove vegetation (e.g., grass, weed, vine, unwanted growth) adhering to or protruding through fences and walls. Remove and dispose clippings and debris. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. 147,995 SF

Attachment 0200000-07 Page 6 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

A721 --- Brush Clearing Clear all brush, small trees (3 inches and less in diameter at ground level), shrubs, and other unwanted vegetation. Remove the vegetation to bare ground, and take all precautions to prevent present and future soil erosion.

Remove vegetation (e.g., grass, weed, vine, unwanted growth) adhering to or protruding through fences and walls. Remove all debris. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

300,000 SF

A722 --- Unwanted Growth

Removal

Remove unwanted growth. The definition of "unwanted growth" may vary from site to site. Unwanted growth shall include, but not be limited to, vines, grasses, weeds, haole koa, brush, and shrubs. Unwanted growth removal shall be conducted in a way that removes both the above ground growth and roots. Take precautions to avoid unnecessary damage to the existing ground area, and avoid damaging other desirable remaining growth, and all obstacles and structures in the area. Cut and remove unwanted growth such as vines and overgrown grass within 2 feet, unless specified otherwise, on each side of perimeter fence lines to a maximum height of 6 inches above ground and to avoid pointed protrusions. Remove all vines, brush, and grass adhering to or protruding through fences.

Remove all debris. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. 75,000 SF

A723 --- Turf Grass Installation:

Seed Sowing

Lawn species to be confirmed with base landscape architect prior to selection. This goes for all lawn installation line items below. The type of grass species will be specified on the order and will normally match the existing surrounding species such as, but not limited to, Common Bermuda

(Cynodon dactylon) or chinch bug resistant variety of St. Augustine

(Stenotaphrum secundatum). Prepare the area to receive the new turf grass to include tasks such as eradicate existing vegetation, perform soil analysis tests, provide soil amendments (determined by results of soil analysis tests) to improve the existing soil, and fine grade area for positive water drainage. Sow seed and cover over the seeds to an average depth of 1/4 inch. Perform maintenance during the turf establishment period which shall be the longer of 60 calendar days after planting or until a minimum

95 percent stand of installed turf species covering the ground.

5,000 SF

Attachment 0200000-07 Page 7 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

Maintenance tasks shall include mowing, edging, eradicating weeds, watering, fertilizing and other operations as necessary to promote grass growth. Replant all areas where the grass dies or does not germinate and establish during the turf establishment period, at no additional cost to the

Government. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

A724 --- Turf Grass Installation:

Hydroseeding; For orders up to 43,560 square feet

The type of grass species will be specified on the order and will normally match the existing surrounding species such as, but not limited to, Common Bermuda (Cynodon dactylon) or chinch bug resistant variety of

St. Augustine (Stenotaphrum secundatum). Prepare the area to receive the new turf grass to include tasks such as eradicate existing vegetation, perform soil analysis tests, provide soil amendments (determined by results of soil analysis tests) to improve the existing soil, and fine grade area for positive water drainage. Uniformly apply a homogeneous hydroseed slurry consisting of fiber mulch, grass seed, fertilizer, tactifier, and water.

Perform maintenance during the turf establishment period which shall be the longer of 60 calendar days after planting or until a minimum 95 percent stand of installed turf species covering the ground.

21,780 SF

Maintenance tasks shall include mowing, edging, eradicating weeds, watering, fertilizing and other operations as necessary to promote grass growth. Replant all areas where the grass dies or does not germinate and establish during the turf establishment period, at no additional cost to the

Government. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

A725 --- Turf Grass Installation:

Hydroseeding; For orders over one acre

The type of grass species will be specified on the order and will normally match the existing surrounding species such as, but not limited to, Common Bermuda (Cynodon dactylon) or chinch bug resistant variety of

St. Augustine (Stenotaphrum secundatum). Prepare the area to receive the new turf grass to include tasks such as eradicate existing vegetation, perform soil analysis tests, provide soil amendments (determined by results of soil analysis tests) to improve the existing soil, and fine grade area for positive water drainage. Uniformly apply a homogeneous hydroseed slurry consisting of fiber mulch, grass seed, fertilizer, tactifier, and water.

Perform maintenance during the turf establishment period which shall be the longer of 60 calendar days after planting or until a minimum 95 percent stand of installed turf species covering the ground.

43,560 SF

Attachment 0200000-07 Page 8 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

Maintenance tasks shall include mowing, edging, eradicating weeds, watering, fertilizing and other operations as necessary to promote grass growth. Replant all areas where the grass dies or does not germinate and establish during the turf establishment period, at no additional cost to the

Government. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

A726 --- Turf Grass Installation:

Hydrosprigging

The type of grass species will be specified on the order and will normally match the existing surrounding species such as, but not limited to, Common Bermuda (Cynodon dactylon) or chinch bug resistant variety of

St. Augustine (Stenotaphrum secundatum). Prepare the area to receive the new turf grass to include tasks such as eradicate existing vegetation, perform soil analysis tests, provide soil amendments (determined by results of soil analysis tests) to improve the existing soil, and fine grade area for positive water drainage. Uniformly apply a homogeneous hydrosprig slurry consisting of fiber mulch, grass sprig, fertilizer, tactifier, and water.

Perform maintenance during the turf establishment period which shall be the longer of 60 calendar days after planting or until a minimum 95 percent stand of installed turf species covering the ground.

500 SF

Maintenance tasks shall include mowing, edging, eradicating weeds, watering, fertilizing and other operations as necessary to promote grass growth. Replant all areas where the grass dies or does not germinate and establish during the turf establishment period, at no additional cost to the

Government. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

A727 --- Turf Grass Installation:

Sod Plugging

The type of grass species will be specified on the order and will normally match the existing surrounding species such as, but not limited to, Common Bermuda (Cynodon dactylon) or chinch bug resistant variety of

St. Augustine (Stenotaphrum secundatum). Prepare the area to receive the new turf grass to include tasks such as eradicate existing vegetation, perform soil analysis tests, provide soil amendments (determined by results of soil analysis tests) to improve the existing soil, and fine grade area for positive water drainage. Plant sod plugs. Perform maintenance during the turf establishment period which shall be the longer of 60 calendar days after planting or until a minimum 95 percent stand of installed turf species covering the ground. 500 SF

Attachment 0200000-07 Page 9 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

Maintenance tasks shall include mowing, edging, eradicating weeds, watering, fertilizing and other operations as necessary to promote grass growth. Replant all areas where the grass dies or does not germinate and establish during the turf establishment period, at no additional cost to the

Government. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

A728 --- Turf Grass Installation:

Sodding

The type of grass species will be specified on the order and will normally match the existing surrounding species such as, but not limited to, Common Bermuda (Cynodon dactylon) or chinch bug resistant variety of

St. Augustine (Stenotaphrum secundatum). Prepare the area to receive the new turf grass to include tasks such as eradicate existing vegetation, perform soil analysis tests, provide soil amendments (determined by results of soil analysis tests) to improve the existing soil, and fine grade area for positive water drainage. Place sod blocks in rows butting each piece firmly against the last. Stagger joints in successive rows. Finished grade of newly planted sod shall match existing height of surrounding lawn. Fill any voids with approved amended topsoil. 500 SF

Perform maintenance during the turf establishment period which shall be the longer of 15 calendar days after planting or until a minimum 95 percent stand of installed turf species covering the ground. Maintenance tasks shall include mowing, edging, eradicating weeds, watering, fertilizing and other operations as necessary to promote grass growth. Replant all areas where the grass dies or does not germinate and establish during the turf establishment period, at no additional cost to the Government. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

A729 --- Ground Cover Planting Species of plant shall be as specified on the order. Prepare the area to receive the new plant to include tasks as eradicate existing vegetation, perform soil analysis tests, and provide soil amendments (determined by results of soil analysis tests) to improve the existing soil. Ground cover shall be of the proper age for the grade of plants indicated, furnished in removable containers, integral containers, or formed homogeneous soil section. Plant wedelia cuttings at a maximum spacing of 12 inches.

Provide the necessary care during the plant establishment period: the longer of 90 calendar days after planting or until the plant growth is firmly established and will survive under the maintenance program currently in effect for the area concerned. 250 SF

Attachment 0200000-07 Page 10 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

Water, fertilize, prune, mulch, eradicate weeds and perform other operations necessary to promote plant growth. Replace dead or unhealthy plants with plants of the same species and sizes as originally ordered, at no additional cost to the Government. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

A730 --- Providing Topsoil Provide topsoil at the site indicated on the task order. The topsoil shall be free of any vegetation, bottles, litter and other deleterious material. The topsoil shall also be free of any foreign matter, either chemical or organic, that would be detrimental to the survival of the vegetation on which it is applied or used in conjunction with. The topsoil shall be soil representative of productive soils in the vicinity. Modify the topsoil, if necessary, to meet the following composition: Containing from 5 to 20% organic matter as determined by the topsoil composition tests of the

Organic Carbon, 6A, Chemical Analysis Method described in the

Department of Agriculture "Soil Survey Investigation Report No. 1, Soil

Survey Laboratory Methods and Procedures for Collecting Soil Samples, Soil Conservation Service." 10 CD

Maximum particle size, 3/4 inch, with maximum 3 percent retained on 1/4-inch screen. Other components shall be within the following percentages:

Silt - 25-50%; Clay - 10-30%; Sand - 20-35%; pH - 5 to 7.6%; Soluble

Salts - 600 PPM maximum. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order.

A731 --- Deciduous Tree Pruning:

Up to 1' Diameter

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts. 34 EA

Attachment 0200000-07 Page 11 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

During the performance of tree pruning/maintenance, assess for tree trunk structural integrity by using nondestructive methods such as visual inspection and mallet sounding test. Submit a written report to the KO within 7 calendar days after the inspection. The report shall include, but not limited to, date of inspection and test; type, size and location of tree;

inspection and test results; and recommendations for increment boring and resistograph tests, tree removal, or other further action. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. ELIN B741 will be ordered together with this catalog item for pruning in close proximity of electrical and miscellaneous utility lines.

A732 --- Deciduous Tree Pruning;

Over 1' up to 2' Diameter

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts. 46 EA

During the performance of tree pruning/maintenance, assess for tree trunk structural integrity by using nondestructive methods such as visual inspection and mallet sounding test. Submit a written report to the

Contracting Officer within 7 calendar days after the inspection. The report shall include, but not limited to, date of inspection and test; type, size and location of tree; inspection and test results; and recommendations for increment boring and resistograph tests, tree removal, or other further action. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. ELIN B741 will be ordered together with this catalog item for pruning in close proximity of electrical and miscellaneous utility lines.

Attachment 0200000-07 Page 12 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

A733 --- Deciduous Tree Pruning:

Over 2' up to 3' Diameter

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts.

18 EA

During the performance of tree pruning/maintenance, assess for tree trunk structural integrity by using nondestructive methods such as visual inspection and mallet sounding test. Submit a written report to the

Contracting Officer within 7 calendar days after the inspection. The report shall include, but not limited to, date of inspection and test; type, size and location of tree; inspection and test results; and recommendations for increment boring and resistograph tests, tree removal, or other further action. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. ELIN B741 will be ordered together with this catalog item for pruning in close proximity of electrical and miscellaneous utility lines.

A734 --- Deciduous Tree Pruning:

Over 3' up to 4' Diameter

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts.

15 EA

Attachment 0200000-07 Page 13 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

During the performance of tree pruning/maintenance, assess for tree trunk structural integrity by using nondestructive methods such as visual inspection and mallet sounding test. Submit a written report to the

Contracting Officer within 7 calendar days after the inspection. The report shall include, but not limited to, date of inspection and test; type, size and location of tree; inspection and test results; and recommendations for increment boring and resistograph tests, tree removal, or other further action. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. ELIN B741 will be ordered together with this catalog item for pruning in close proximity of electrical and miscellaneous utility lines.

A735 --- Deciduous Tree Pruning:

Over 4 ' up to 5' Diameter

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts. 3 EA

During the performance of tree pruning/maintenance, assess for tree trunk structural integrity by using nondestructive methods such as visual inspection and mallet sounding test. Submit a written report to the

Contracting Officer within 7 calendar days after the inspection. The report shall include, but not limited to, date of inspection and test; type, size and location of tree; inspection and test results; and recommendations for increment boring and resistograph tests, tree removal, or other further action. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. ELIN B741 will be ordered together with this catalog item for pruning in close proximity of electrical and miscellaneous utility lines.

Attachment 0200000-07 Page 14 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

A736 --- Deciduous Tree Pruning:

Over 5' Up to 6' Diameter

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts.

2 EA

During the performance of tree pruning/maintenance, assess for tree trunk structural integrity by using nondestructive methods such as visual inspection and mallet sounding test. Submit a written report to the

Contracting Officer within 7 calendar days after the inspection. The report shall include, but not limited to, date of inspection and test; type, size and location of tree; inspection and test results; and recommendations for increment boring and resistograph tests, tree removal, or other further action. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. ELIN B741 will be ordered together with this catalog item for pruning in close proximity of electrical and miscellaneous utility lines.

A737 --- Deciduous Tree Pruning:

Over 6' Up to 7' Diameter

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts.

3 EA

Attachment 0200000-07 Page 15 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

During the performance of tree pruning/maintenance, assess for tree trunk structural integrity by using nondestructive methods such as visual inspection and mallet sounding test. Submit a written report to the

Contracting Officer within 7 calendar days after the inspection. The report shall include, but not limited to, date of inspection and test; type, size and location of tree; inspection and test results; and recommendations for increment boring and resistograph tests, tree removal, or other further action. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. ELIN B741 will be ordered together with this catalog item for pruning in close proximity of electrical and miscellaneous utility lines.

A738 --- Deciduous Tree Pruning:

Over 7' Up to 8' Diameter

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts. 1 EA

During the performance of tree pruning/maintenance, assess for tree trunk structural integrity by using nondestructive methods such as visual inspection and mallet sounding test. Submit a written report to the

Contracting Officer within 7 calendar days after the inspection. The report shall include, but not limited to, date of inspection and test; type, size and location of tree; inspection and test results; and recommendations for increment boring and resistograph tests, tree removal, or other further action. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. ELIN B741 will be ordered together with this catalog item for pruning in close proximity of electrical and miscellaneous utility lines.

Attachment 0200000-07 Page 16 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

A739 --- Deciduous Tree Pruning:

Over 8' Up to 9' Diameter

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts. 1 EA

During the performance of tree pruning/maintenance, assess for tree trunk structural integrity by using nondestructive methods such as visual inspection and mallet sounding test. Submit a written report to the

Contracting Officer within 7 calendar days after the inspection. The report shall include, but not limited to, date of inspection and test; type, size and location of tree; inspection and test results; and recommendations for increment boring and resistograph tests, tree removal, or other further action. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. ELIN B741 will be ordered together with this catalog item for pruning in close proximity of electrical and miscellaneous utility lines.

A740 --- Deciduous Tree Pruning:

Over 9' Up to 10' Diameter

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts. 1 EA

Attachment 0200000-07 Page 17 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

During the performance of tree pruning/maintenance, assess for tree trunk structural integrity by using nondestructive methods such as visual inspection and mallet sounding test. Submit a written report to the

Contracting Officer within 7 calendar days after the inspection. The report shall include, but not limited to, date of inspection and test; type, size and location of tree; inspection and test results; and recommendations for increment boring and resistograph tests, tree removal, or other further action. Commence normal work within five calendar days and complete within 14 calendar days after issuance of a order unless otherwise indicated on the order. ELIN B741 will be ordered together with this catalog item for pruning in close proximity of electrical and miscellaneous utility lines.

A741 --- Deciduous Tree Pruning:

Additional charge for trimming in close proximity of electrical and miscellaneous utility lines

Additional charge per tree for trimming in close proximity of electrical and miscellaneous utility lines. Use extreme caution in conducting operations around energized high voltage lines. Perform all work according to the

State of Hawaii, Division of Occupational Safety and Health, Department of Labor and Industrial Relations, Chapter 94. In addition, take all precautions to ensure that no damage to private or public property will result from its operations. No scheduled electrical outages will be granted for tree pruning work. Prune the trees while power lines are energized. If the Contractor decides the work condition jeopardizes the safety of personnel, the Contractor shall not proceed with the pruning in that specific area. Notify the Contracting Officer in writing about the hazardous work condition and plan with the Contracting Officer a course of action to complete the work. This catalog item will be ordered together with the appropriate deciduous tree pruning catalog item for trimming in close proximity of electrical and miscellaneous utility lines.

83 EA

A742 --- Coniferous Tree Pruning:

Up to 20' Height Trees

Prune trees to preserve the natural character of the tree, leaving trees well shaped and balanced, and to maintain required clearances. Trees shall exhibit a healthy appearance, and color, free of disease, pests, broken branches and limbs. Minimum vertical clearance over roadways, driveways, parking areas, and roofs shall be 20 feet. Minimum vertical clearance over lawns and sidewalks shall be 15 feet. Remove from banyan trees all aerial roots that have not established themselves into the ground.

Remove water sprouts growing within utility line clearance zone at its point of attachment to the main limb. Directionally prune trees to promote future growth away from power lines. Trim large branches outside the minimum clearance zone to avoid development of fast growing water sprouts. 2 EA

Attachment 0200000-07 Page 18 (Amendment 0007)

SOLICITATION/CONTRACT #N62478-14-R-2423

EXHIBIT A - CLIN 9000

EST UNIT OF UNIT TOTAL

ELIN CAC SHORT DESCRIPTION FULL DESCRIPTION QTY ISSUE PRICE AMOUNT

During the performance of tree…