Questions and Answers. 2 of 2.pdf
PDF 266 KB Posted
- Attached to
- NNSY Forklift Production Support
- Solicitation number
- N4215826QN005
About this file
This is a Questions and Answers document addressing contractor inquiries regarding a Service Contract Act (SCA)-covered federal services contract.
The contract involves forklift operations and project management positions. The Government will accept a minimum of one supervisor resume at proposal submission, with additional supervisor resumes required upon onboarding until full staffing is achieved. For SCA compliance, the Forklift Operator position is classified as A112A and the Forklift/Aerial Lift Operator position is classified as A112B, both falling under occupation code 21020 in the wage determination. Management positions—Program Manager (A114A), Project Manager (A114B), and Supervisor (A114C)—are exempt from SCA coverage and therefore do not appear in the wage determination. There is no incumbent contractor on this requirement.
View the file
Other files
Show all 18
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1. Will the Government accept a minimum of one supervisor resume for the proposal with subsequent resumes provided upon award until 100% manning is achieved?
Yes, unless you already have the resumes from supervisor before they start, then attached. All other supervisor resumes will be needed as they onboard.
2. Could you supply the codes for:
Forklift Operator: A112A Forklift/Aerial Lift Operator: A112B A114A - Program Manager: A114A A114B - Project Manager: A114B A114C – Supervisor: A114C
3. Looking at the wage determination it looks like the code for Forklift is 21020. Could you confirm that is correct and is it for both of the above listed forklift positions? Also, the remaining positions - are these part of the wage determination? If so, I was unable to find them.
Part 1: The appropriate occupation code for Forklift work is 21020. 21020 is the correct code for both forklift positions.
Part 2: The remaining positions (Program Manager, Project Manager, and Supervisor) are exempt and are not covered under the SCA and therefore do not appear in the wage determination.
4. Is there an incumbent? If so, who?
No
5. For Service Contract Act (SCA) compliance, please identify the appropriate labor categories and SCA codes applicable to the Forklift Operator and Forklift Aerial Lift Operator.
Forklift Operator A112A
Forklift/Aerial Lift Operator A112B
File details come from the government source that posted it. Updated .