Draft_RFP.pdf

CODE

(Hour)

PAGE(S)

until 02:00 PM local time 18 Jul 2015

X

A

X B

X C X D

EX

X

G

F 99 - 107

108 - 122

X H 123 - 129 rhonda.garcia@navy .mil

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA

FAR (48 CFR) 53.214(c)

1 129

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N00421 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 1 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and

22299 Exploration Drive conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

RHONDA GARCIA 301-737-7555

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

1 - 3

4 - 19

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

20 - 53

54 - 55

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

56 - 58

59 - 62 X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 63 - 68 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 69 - 83 X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIO NS AND INSTRUCTIO NS

PART III - LIST O F DO CUMENTS, EXHIBITS AND O THER ATTACHMENTS

84 - 97

PART II - CO NTRACT CLAUSES

NAVAL AIR WARFARE CENTER AD-PAX ANNEX 1

CODE 2.5.1.4

22299 EXPLORATION DRIVE

EXPLORATION IV, SUITE 301

LEXINGTON PARK MD 20653-2058

SEE SECTION A

FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.

1300304657

5. DATE ISSUED4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N00421-15-R-0023

Section A - Solicitation/Contract Form

NOTES

1. Both completion and term task orders will be issued under this single award task order contract. NAVAIR clause 5252.211-9503 LEVEL OF EFFORT (COST REIMBURSEMENT) (NAVAIR)(DEC 2012) will be applicable in term task orders.

2. This solicitation is, and the resulting contract will be, subject to the Service Contract Act (SCA) of 1965, as amended, and to FAR clause 52.222-41, contained in Section I of this solicitation. The cost/price proposal shall demonstrate compliance with the minimum monetary wages and fringe benefits for service employees as specified in the Wage Determinations (provided as an attachment in Section J of this solicitation). The following Wage Determinations may be applicable for this effort:

1) WD 05-2103 (Rev.-15) revised 12/22/2014 – applicable

2) WD 05-2543 (Rev.-17) revised 12/22/2014 – applicable, if SCA labor category is proposed for this site

3) WD 05-2301 (Rev.-15) revised 12/22/2014 – applicable, if SCA labor category is proposed for this site

4) WD 05-2057 (Rev.-16) revised 12/22/2014 – applicable, if SCA labor category is proposed for this site

5) WD 05-2241 (Rev.-16) revised 12/22/2014 – applicable, if SCA labor category is proposed for this site

6) WD 05-2449 (Rev.-15) revised 12/22/2014 – applicable, if SCA labor category is proposed for this site

3. FAR 52.222-17 requires successor contractors to give the right of first refusal to all qualified service employees

(within the meaning of the SCA) that were performing in the proposed positions under the predecessor contract.

The Offeror’s proposal shall demonstrate compliance with FAR 22.12 and 52.222-17. If the offeror is proposing the incumbent workforce based on FAR 52.222-17 for SCA labor categories, the proposed employee should be identified as either current (only applies if offeror is the incumbent contractor), contingent (only if offeror has a letter of intent in place with the employee) or "Prospective/Incumbent" if the offeror does not know the identity of the incumbent employee.

4. The Product Service Code (PSC) for this procurement is AC65.

5. This contract will have a four-year ordering period.

6. The contractor will be required to have a SECRET facility clearance and a SECRET clearance for personnel identified in Section C Performance Work Statement (PWS) paragraph 16.0 upon award of the contract. The contractor will not be permitted access to classified information until a final DD254 is incorporated as an attachment to the contract award.

POINTS OF CONTACT

Contract Specialist: Rhonda Garcia

Phone: 301-737-7555

E-mail: rhonda.garcia@navy.mil

Procuring Contracting Officer: Frank Douglass

Phone: 301-737-2852

E-mail: frank.douglass@navy.mil mailto:rhonda.garcia@navy.mil mailto:frank.douglass@navy.mil

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

1000 1 Lot

NWCF Labor

CPFF

Navy Working Capital Fund (NWCF) labor in accordance with (IAW)

Section C - Performance Work Statement (PWS) paragraphs 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, and 3.12.

FOB: Destination

PURCHASE REQUEST NUMBER: 1300304657

ESTIMATED COST

FIXED FEE

TOTAL EST COST + FEE

1001 1 Lot

OPN Labor

Other Procurement, Navy (OPN) labor IAW Section C - PWS paragraphs 3.1, 3.2, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, and 3.12.

1002 1 Lot

O&MN Labor

Operation and Maintenance, Navy (O&MN) labor IAW Section C - PWS paragraphs 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, and 3.12.

1003 1 Lot

RDT&E Labor

Research, Development, Test and Evaluation (RDT&E) labor IAW Section C

- PWS paragraphs 3.2, 3.3, 3.5, 3.7, 3.8, 3.9, and 3.12.

1004 1 Lot FMS Labor

CPFF

Foreign Military Sales (FMS) labor IAW Section C - PWS paragraphs 3.1, 3.2, 3.4, 3.8, 3.9, 3.11, and 3.12.

NET AMT

1005 1 Lot

SCN Labor

Shipbuilding & Conversion Navy (SCN) labor IAW Section C - PWS paragraphs 3.1, 3.2, 3.3, 3.4, 3.8, 3.9, and 3.12.

1006 1 Lot

PRIVATE PARTY Labor

PRIVATE PARTY labor IAW Section C - PWS paragraphs 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, and 3.12.

2000 1 Lot NWCF material for CLIN 1000

COST

Incidental NWCF material IAW Section C - PWS paragraph 6.1.

2001 1 Lot OPN material for CLIN 1001

COST

Incidental OPN material IAW Section C - PWS paragraph 6.1.

2002 1 Lot O&MN material for CLIN 1002

COST

Incidental O&MN material IAW Section C - PWS paragraph 6.1.

2003 1 Lot RDT&E material for CLIN 1003

COST

Incidental RDT&E material IAW Section C - PWS paragraph 6.1.

2004 1 Lot FMS material for CLIN 1004

COST

Incidental FMS material IAW Section C - PWS paragraph 6.1.

2005 1 Lot SCN material for CLIN 1005

COST

Incidental SCN material IAW Section C - PWS paragraph 6.1.

2006 1 Lot PRIVATE PARTY material for CLIN 1006

COST

Incidental PRIVATE PARTY material IAW Section C - PWS paragraph 6.1.

3000 1 Lot NWCF travel for CLIN 1000

COST

NWCF travel IAW Section C - PWS paragraph 6.4.

3001 1 Lot OPN travel for CLIN 1001

COST

OPN travel IAW Section C - PWS paragraph 6.4.

3002 1 Lot O&MN travel for CLIN 1002

COST

O&MN travel IAW Section C - PWS paragraph 6.4.

3003 1 Lot RDT&E travel for CLIN 1003

COST

RDT&E travel IAW Section C - PWS paragraph 6.4.

3004 1 Lot FMS travel for CLIN 1004

COST

FMS travel IAW Section C - PWS paragraph 6.4.

3005 1 Lot SCN travel for CLIN 1005

COST

SCN travel IAW Section C - PWS paragraph 6.4.

3006 1 Lot PRIVATE PARTY travel for CLIN 1006

COST

PRIVATE PARTY travel IAW Section C - PWS paragraph 6.4.

4000 1 Lot NWCF Shipyard Services for CLIN 1000

COST

NWCF shipyard services IAW Section C - PWS 6.2.

4001 1 Lot OPN Shipyard Services for CLIN 1001

COST

OPN shipyard services IAW Section C - PWS 6.2.

4002 1 Lot O&MN Shipyard Services for CLIN 1002

COST

O&MN shipyard services IAW Section C - PWS 6.2.

4003 1 Lot RDT&E Shipyard Services for CLIN 1003

COST

RDT&E shipyard services IAW Section C - PWS 6.2.

4004 1 Lot FMS Shipyard Services for CLIN 1004

COST

FMS shipyard services IAW Section C - PWS 6.2.

4005 1 Lot SCN Shipyard Services for CLIN 1005

COST

SCN shipyard services IAW Section C - PWS 6.2.

4006 1 Lot PRIVATE PARTY Shipyard Services CLIN 1006

COST

PRIVATE PARTY shipyard services IAW Section C - PWS 6.2.

5000 1 Lot NWCF Calibration Services for CLIN 1000

COST

NWCF calibration services IAW Section C - PWS 6.3.

5001 1 Lot OPN Calibration Services for CLIN 1001

COST

OPN calibration services IAW Section C - PWS 6.3.

5002 1 Lot O&MN Calibration Services for CLIN 1002

COST

O&MN calibration services IAW Section C - PWS 6.3.

5003 1 Lot RDT&E Calibration Services for CLIN 1003

COST

RDT&E calibration services IAW Section C - PWS 6.3.

5004 1 Lot FMS Calibration Services for CLIN 1004

COST

FMS calibration services IAW Section C - PWS 6.3.

5005 1 Lot SCN Calibration Services for CLIN 1005

COST

SCN calibration services IAW Section C - PWS 6.3.

5006 1 Lot PRIVATEPARTY CalibrationServicesCLIN1006

COST

PRIVATE PARTY calibration services IAW Section C - PWS 6.3.

6000 1 Lot NWCF NMCI for CLIN 1000

COST

NWCF NMCI IAW Section C - PWS paragraph 6.5.

6001 1 Lot OPN NMCI for CLIN 1001

COST

OPN NMCI IAW Section C - PWS paragraph 6.5.

6002 1 Lot O&MN NMCI for CLIN 1002

COST

O&MN NMCI IAW Section C - PWS paragraph 6.5.

6003 1 Lot RDT&E NMCI for CLIN 1003

COST

RDT&E NMCI IAW Section C - PWS paragraph 6.5.

6004 1 Lot FMS NMCI for CLIN 1004

COST

FMS NMCI IAW Section C - PWS paragraph 6.5.

6005 1 Lot SCN NMCI for CLIN 1005

COST

SCN NMCI IAW Section C - PWS paragraph 6.5.

6006 1 Lot PRIVATE PARTY NMCI for CLIN 1005

COST

PRIVATE PARTY NMCI IAW Section C - PWS paragraph 6.5.

7000 1 Lot NSP Technical Data

FFP

Not Separately Priced (NSP) technical data IAW Section C - PWS paragraph 8.0.

NET AMT

CLAUSES INCORPORATED BY FULL TEXT

5252.211-9503 LEVEL OF EFFORT (COST REIMBURSEMENT) (NAVAIR)(DEC 2012)

(a) The level of effort estimated to be ordered during the term of this contract is [1,075,200] man-hours of direct labor including authorized subcontract labor, if any. The contractor shall not, under any circumstances, exceed one hundred (100%) percent of the total level of effort specified in this basic contract. The estimated composition of the total man-hours of direct labor by classification is as follows:

Labor Category Total Hours

Administrative Assistant 23,040

Computer Scientist 23,040

Drafter/CAD Operator II 7,680

Drafter/CAD Operator III 7,680

Electronics Technician, Maintenance I 192,000

Electronics Technician, Maintenance II 192,000

Electronics Technician, Maintenance III* 168,960

Engineer/Scientist I 15,360

Engineer/Scientist II 15,360

Engineer/Scientist III* 15,360

Engineering/Electronics Technician, Senior* 23,040

Environmental Technician 7,680

Financial Analyst 7,680

Maintenance Worker 15,360

Logistics Analyst 46,080

Maintenance Technician , Senior 38,400

Operations Security Specialist 7,680

Order Clerk I 7,680

Order Clerk II 46,080

Painter, Maintenance 15,360

Pipefitter, Maintenance 23,040

Production Control Clerk 7,680

Program Analyst 23,040

Project Manager* 15,360

Program Manager* 7,680

Supply Technician 30,720

Technical Instructor/Course Developer 38,400

Technical Writer III 7,680

Welder, Combination, Maintenance 23,040

Word Processor I 23,040

Totals 1,075,200

* denotes Key Personnel labor categories

(b) FAR Clause 52.232-20, "Limitation of Cost" applies to fully funded orders and FAR Clause 52.232-22, "Limitation of Funds" applies to incrementally funded orders. Nothing in this clause amends the rights or responsibilities of the parties hereto under either of those two clauses. In addition, the notifications required by this clause are separate and distinct from any specified in either FAR Clause 52.232-20 or FAR Clause 52.232-22.

(c) In the event that less than one hundred (100%) percent of the established level of effort of the contract/order is actually expended by the end of the performance period, the Government shall have the option of:

(1) Requiring the Contractor to continue performance, subject to the provisions of the FAR Clause 52.232-20 or

52.232-22, as applicable, until the effort expended equals 100% of the established Level of Effort; or

(2) Effecting a reduction in the fixed fee by the percentage by which the total expended man-hours is less than one hundred (100%) percent of the established Level of Effort.

(d) The contractor agrees that effort performed in fulfillment of level of effort obligations under this contract shall include only verifiable effort in direct support of the work specified. It shall not include efforts such as work performed in transit to or from an employee's usual workplace, work during lunchtime activities, or effort performed at other non-work locations.

(e) In performing the contract/order, the contractor may use any reasonable combination of hours for the labor categories in support of section C of this contract/order.

Section C - Descriptions and Specifications

DESCRIPTION

Items 1000, 1001, 1002, 1003, 1004, 1005, and 1006 – The contractor shall provide labor in accordance with

(IAW) and within the scope of the Section C Performance Work Statement (PWS) of the basic contract and as detailed in the individual task order PWS.

Items 2000, 2001, 2002, 2003, 2004, 2005, and 2006 – The contractor shall provide material IAW the H-1 clause

RESTRICTION ON THE DIRECT CHARGING OF MATERIAL and within the scope of the Section C PWS of the basic contract as detailed in the individual task order PWS.

Items 3000, 3001, 3002, 3003, 3004, 3005, and 3006 – The contractor shall provide travel IAW the NAVAIR clause 5252.237-9509 and within the scope of the Section C PWS of the basic contract as detailed in the individual task order PWS.

Items 4000, 4001, 4002, 4003, 4004, 4005, 4006, 5000, 5001, 5002, 5003, 5004, 5005, and 5006 – The contractor shall provide services within the scope of the Section C PWS of the basic contract as detailed in individual task order

PWS.

Items 6000, 6001, 6002, 6003, 6004, 6005, and 6006 – The contractor shall provide NMCI IAW the NAVAIR clause 5252.237-9503 and within the scope of the Section C PWS of the basic contract as detailed in the individual task order PWS.

Item 7000 – The data to be furnished hereunder shall be IAW the Exhibit A, DD Form 1423, Contract Data

Requirements Lists (CDRLs) and within the scope of the Section C PWS of the basic contract as detailed in the individual task order PWS.

PERFORMANCE WORK STATEMENT

IDENTIFICATION SYSTEMS (IDS)

TECHNICAL AND INTEGRATION SUPPORT SERVICES

The Naval Air Warfare Center Aircraft Division (NAWCAD), Patuxent River, St. Inigoes, is engaged in the design, development, integration, test and evaluation, installation, fielding, certification, maintenance, and logistic support of Cooperative Identification (ID); Non-Cooperative Target Recognition (NCTR); Air

Traffic Control (ATC) equipment, systems and subsystems; and advanced technologies development. The purpose of this contract is to provide the Identification Systems (IDS) Division with technical and integration services that are essential to these mission functions.

1.0 SCOPE. This Performance Work Statement (PWS) is to provide technical and integration support services to the IDS division in design and feasibility evaluation, component and system design, system integration, installation testing and evaluation, in-service engineering, logistics, repair and validation, training, lab maintenance, quality assurance, and technical management. A list of systems and equipment required includes, but are not limited to, the following:

Air Traffic Control Console (ATCC)

AN/APX-118Transponder Set

AN/APX-123(V) Transponder Set

AN/FSQ-204 DoD Standard Terminal Automation Replacement System (STARS)

AN/SLQ-20B Electronic Countermeasures Set (ECMS)

AN/TPX-42A(V)5, 10 Shore ATC

AN/TPX-42A(V)14 with Field Change (FC)2 and FC3 Shipboard ATC System

AN/UPM-155 Radar Test Set (RTS)

AN/UPX-29(V) Centralized Identification Friend or Foe (IFF) System

AN/UPX-29A(V) Centralized IFF System

AN/UPX-34A Non-Cooperative Target Recognition/Shipboard Advanced Radar Target Identification System

(NCTR/SARTIS)

AN/UPX-36(V) Centralized IFF System

AN/UPX-37 Interrogator Set

AN/UPX-38(V) Automatic Identification (AutoID) System

AN/UPX-41(C) Interrogator Set

AN/USQ-T46(V) Battle Force Tactical Trainer (BFTT)

AN/USM-708 Communications/Navigation RF Avionics Flightline Tester (CRAFT)

AN/UYX-1(V) Bright Radar Alphanumeric Display System (BRANDS)

Automatic Test Equipment (ATE)

C-12673/UPX Control Indicator Fleet Identification Friend or Foe (IFF) IFF Micro Transponder

Inverse Synthetic Aperture Radar (ISAR) Identification

MARK XIIA Mode 5 IFF

Multi-Function Electromagnetic Radiating System (MERS)

Navy Unmanned Combat Air System (N-UCAS)

Secondary Surveillance Radar (SSR) Mode S

Shipboard Interface Processor (SIP)

TS-4530 Flight Line Test Set

Microtransponder

Services procured under this contract may include support of NAWCAD tasking for programs sponsored by the Naval Air Systems Command (NAVAIR), Naval Sea Systems Command (NAVSEA), Naval Inventory Control Point – Mechanicsburg (NAVICP-M), other Department of Defense (DoD) activities, United States Coast Guard (USCG), and commercial and Foreign Military Sales (FMS) customers. Tasking includes shipping of systems, components and parts; training and provision of training materials; provision of technical manuals; system support and provision of technical assistance by phone, electronic mail or on-site at the pertinent host country or on the host country’s ships.

NAWCAD, NAVAIR, and NAVSEA establish schedules annually, and review and update schedules regularly. NAWCAD will provide all schedule information to the Contractor.

2.0 APPLICABLE DOCUMENTS. The following documents are for reference only. The Contractor is encouraged to submit alternatives to specifications and standards cited; however, the proposed alternatives shall satisfy requirements of the PWS without compromising the program integrity. Unless otherwise noted, the revision level and date for each document, specification or standard cited shall be that listed in the Department of Defense

ASSIST Database (http://assistdocs.com/search) in effect on the date of contract award or at the time of an option exercise.

2.1 MILITARY AND DOD SPECIFICATIONS.

MIL-D-23140D Drawings, Installation Control, for Shipboard Electronic Equipment

MIL-DTL-24784/4C Commercial-off-the-shelf (COTS) Equipment Manual Requirements

MIL-DTL-24784/17B Hull, Mechanical, Electrical (HM&E) Systems and Electronic and Interior

2.2 MILITARY AND DOD STANDARDS.

MIL-STD-38784(A) Notice 2 Standard Practice for Manuals, Technical: General Style and Format

Requirements

MIL-STD-461F Requirements for the Control of Electromagnetic Interference

Characteristics of Subsystems and Equipment

MIL-STD-882E System Safety

DoD Instruction 4151.19 Serialized Item Management (SIM) for Material Maintenance

DoD-STD-2106 Development of Shipboard Industrial Test Procedures

2.3 MILITARY HANDBOOKS.

MIL-HDBK-29612/2A Notice 2 Instructional Systems Development/Systems Approach to Training Education

(Part 2 of 5 Parts)

MIL-HDBK-502 Notice 1 Acquisition Logistics

2.4 COMMERCIAL STANDARDS

IEEE/EIA J-STD-016 Trial Use Standard for Information Technology, Software Life Cycle

Processes, Software Development, Acquirer-Supplier Agreement

IEEE/EIA 12207 Standard for Information Technology - Software Life Cycle Processes

IEEE/EIA 12207.1 Standard for Information Technology - Software Life Cycle Processes -

Life Cycle Data

IEEE/EIA 12207.2 Standard for Information Technology - Software Life Cycle Processes –

Implementation Considerations

IEEE Standard 830-1984 Software Requirements Specifications

IEEE Standard 829-1983 Standard for Software Test Documentation

IEEE Standard 730-1989 Standard for Software Quality Assurance Plans

IEEE Standard 828-1990 Standard for Software Configuration Management Plans

ICAO Annex 10 International Standards and Recommended Practices for Aeronautical

Telecommunications

ICAO 9688 Manual for Mode S Specific Services

RTCA/DO-181B Minimum Operational Performance Standards for Air Traffic Control Radar

Beacon System/Mode Select (ATCRBS/MODE S Airborne Equipment

GEIA-STD-0007 Logistics Products Data

ISO 9001:2008 Quality Management Systems

CMU/SEI-2002-TR-004 Software Engineering Institute, Capability Maturity Model Integration

(CMMI) for Systems Engineering, and Integrated Product and Process

Development, CMMI-SE/SW/IPPD, version 1.1

2.5 OTHER PUBLICATIONS

ATCE-ULSS-007 ULSS for Shipboard Air Traffic Control Radar Beacon System

Identification Friend or Foe Fleet Identification System Systems

(AIMS)

DoD AIMS 03-1000A Performance/Design and Qualification Requirements; Technical

Standard for the AIMS Electronic Identification System and

Military Mode S

DoD AIMS 97-1000 Performance/Design and Qualification Requirements; Technical

Standard for the AIMS Electronic Identification System and

Military Mode S

S9081-AB-GIB-010 NAVSEAINST 4130 NAVSEA Reliability-Centered Maintenance Handbook

NAVSEAINST 4720.11C Software Configuration Status Accounting

NAVSEAINST 4790.3B System (PMS) Shipboard Installations and Modifications Performed by Alteration

Installation Teams

NAWCADINST 13640.1A Technical Feedback Reports (Report Symbol OPNAV 4790-4)

Policy and Responsibility for Processing Planned Maintenance

Metrology Calibration (METCAL) Program

NAWCADINST 13900.2A Procurement, Calibration, and Repair of General Purpose

Electronic Test Equipment (GPETE) and Calibration Standards

NISPOM DoD 5220.22-M National Industrial Security Program Operating Manual

OPNAVINST 4790.4C Ship's Maintenance and Material Management (3M) Manual

OPNAVINST 4790.2G The Naval Aviation Maintenance Program (NAMP)

SL720-AA-MAN-030 Surface Ship and Carrier Entitled Process for Modernization

(SSCEPM) Management and Operations Manual

STANAG 4193 Technical Characteristics of IFF Fleet A and Fleet Interrogators and Transponders, Part I through XI

NAVAIRINST 4355.19D Systems Engineering Technical Review Process

3.0 REQUIREMENTS.

3.1 SYSTEM INTEGRATION SERVICES (1000, 1001, 1002, 1004, 1005, 1006). The Contractor shall provide the following integration services to establish total systems capable of performing specific functions as required by individual task orders. The Contractor shall:

a. Prepare detailed installation design drawings, interface definitions, single line block diagrams, system cable block diagrams, system wire run sheets, space arrangement drawings, antenna systems arrangement drawings, and installation control drawings and deliver IAW CDRL A004. Prepare and deliver prototype fabrication drawings IAW CDRL A004 and fabricate applicable interface devices and/or applications and deliver to the Government. Provide technical input to engineering drawings for NAWCAD Patuxent River, St. Inigoes Cooperative ID, NCTR, and ATC systems, and deliver

IAW CDRL A010. Create detailed electrical and mechanical assembly and installation drawings, and engineering sketches for guidance and information, and deliver IAW CDRL A004.

b. Accomplish integration and installation for specific equipment, execute Government test procedures, prepare, and deliver test report IAW CDRL A032, and Technical Assistance Performance Evaluation (TAPE) form

IAW CDRL A033.

c. Install/remove systems and equipment onto/from the test site and/or the Fleet platform, execute Government test procedures for specific equipment, prepare and deliver test report IAW CDRL A032.

d. Prepare and update specifications and technical manuals applicable to new or existing systems or components, and deliver technical manuals IAW CDRL A029. Review requirements and specification documentation to ascertain design goals and standards established during component or system concept formulation and initial design phases, and update the final specification for production units. Prepare and deliver technical reports IAW CDRL A004. Manual content shall include, but is not limited to, instructions for handling, transporting, installing, operating and maintaining systems.

e. Provide subject matter expertise for the review, comment and evaluation of Frequency Spectrum

Certification. Complete standardized forms, in the format provided by the requesting agency. Create briefing material and deliver technical reports IAW CDRL A010 and A019, and briefs IAW CDRL A030.

3.2 INSTALLATION TESTING AND EVALUATION SERVICES (1000, 1001, 1002, 1003,

1004, 1005, 1006). The Contractor shall provide the following installation platform services for new/modified systems or equipment as part of a scheduled upgrade or for technical evaluation/operational test and evaluation purposes as required by individual task orders. The Contractor shall provide the following test and evaluation services for the monitoring and conducting of tests, evaluations, studies and the preparation of test plans for specified systems, subsystems or equipment as required by individual task orders. The Contractor shall:

a. Conduct and document a feasibility impact assessment, including description of equipment, preliminary installation drawings, and definition of support requirements. Elements of this task shall include the following:

(1) Evaluate the adequacy of existing or developmental equipment and systems to meet current and future requirements with normal growth considered.

(2) Evaluate operability, reliability, and maintainability in intended environments.

(3) Assess interoperability with other systems.

(4) Evaluate life cycle cost effectiveness.

(5) Conduct technical evaluation and support services for Cooperative ID, NCTR, and ATC systems.

The Contractor shall document and deliver the technical report IAW (1)-(5) stated above and CDRL A004.

b. Prepare interface control drawings, cable running sheets, arrangement drawings (plan and elevation), and detailed design drawings for any required fabrications, and installation test and checkout plans for specified systems, subsystems or equipment and deliver technical report IAW

CDRL A004. Provide test and evaluation services for the monitoring and conducting of tests, evaluations, studies and the preparation of test plans for specified systems, subsystems or equipment. Prepare and deliver test report IAW CDRL A032, and when applicable, trip report

IAW CDRL A020.

c. Provide technical input to specifications for a variety of Cooperative ID, NCTR, and ATC equipment and systems, and deliver technical report IAW CDRL A010. The Contractor shall develop and update technical standards for installation, maintenance, and certification of these systems. Prepare and deliver Military Specifications IAW CDRL A002. Prepare and deliver Planned

Maintenance System (PMS) Maintenance Index Page (MIP) IAW CDRL A005, Planned Maintenance

System (PMS) Maintenance Requirement Card (MRC) IAW CDRL A006, and technical manual IAW

CDRL A029.

d. Prepare detailed test procedures for testing and evaluating the specified system, subsystem, or equipment. Prepare and deliver Data Item Description (DID) IAW CDRL A003. Prepare test plans (including Total Ship Test Plans), to establish basic requirements for and relationships among first article tests, factory acceptance tests, system integration tests, installation tests, acceptance tests, technical evaluations, operational test and evaluations, and test outlines; and provide inputs to Test Bed Implementation Plans, Test and Evaluation Master Plans, and Test and Evaluation

Plans. Test plans shall be developed IAW DoD-STD-2106, and delivered IAW CDRL A031. The test procedures shall define clearly the objectives of the test, the procedures required of the test team to meet the objectives of the test, the pass/fail criteria for the test, and equipment requirements. Test procedures documentation shall include the following:

(1) Test title.

(2) Test objectives.

(3) Unit(s) to be tested.

(4) Test equipment required.

(5) Outside services required (if any)

(6) Staffing required.

(7) Test duration.

(8) Number of times each test is to be performed.

(9) Detailed test procedures and pass/fail criteria.

(10) Test data sheets.

(11) References.

e. Prepare and deliver test report upon completion of testing IAW CDRL A032.

f. The Contractor shall develop test plans for Government approval, and deliver IAW CDRL

A031, prior to conducting testing. Conduct and support the test and evaluation of specified systems, subsystems, or equipment following approved test plans and procedures and prepare and deliver test report IAW CDRL A032 upon completion of testing. Specifically, the Contractor shall:

(1) Install the system or equipment for U.S. Government testing at specified locations, afloat, or ashore.

(2) Perform test at anticipated locations specified in paragraph 4.0, afloat, or ashore.

(3) Design and fabricate test aids for use in testing and evaluating the specified system or equipment at specified locations, afloat, or ashore.

(4) Plan and design test vehicles and test against new or existing systems.

(5) Develop techniques, design changes, or other strategies aimed at reducing maintenance failures, and prepare reports that include the T&E results of the tested system.

3.3 IN-SERVICE ENGINEERING (1000, 1002, 1003, 1005, 1006), The Contractor shall provide the following in-service engineering services, including performance analyses, problem identification and solution development, for existing and/or newly developed Cooperative ID, NCTR, and ATC systems and equipment as required by individual task orders. The Contractor shall:

a. Provide inputs and support to operational and failure analyses to assess problems and develop solutions, including new designs to enhance performance when necessary. Prepare and deliver technical report IAW CDRL A004, and Failure Analysis technical report IAW CDRL A028. Maintain applicable documentation in the required format using the division’s data repositories.

b. Support on-site engineering investigations to evaluate performance of systems and/or equipment including critical examination of installation designs and physical layouts for reliability, ease of maintenance, and suitability, and provide engineering analysis, photos, other applicable documentation. Prepare and deliver technical report IAW CDRL A010, trip report IAW CDRL

A020, and TAPE form IAW CDRL A033. Review technical accuracy of all requisite technical documentation and provide comments and recommendations that validate accuracy. Prepare and deliver technical report IAW CDRL A004.

c. Develop, review and revise Planned Maintenance System (PMS) Maintenance Index Pages (MIPs), and Maintenance Requirements Cards (MRCs) for systems and equipment. Develop PMS documentation IAW MIL-P-24534A. Prepare and deliver PMS MIPs IAW CDRL A005, and MRCs

IAW CDRL A006. Maintain a library of all MIPs and MRCs using the division’s data repositories.

d. Provide technical assistance in support of systems on ships and at shore sites. Provide emergency and scheduled technical assistance to ships and shore activities. Inspect, repair, and adjust the equipment during visits, execute Government approved test procedures and provide test results, component failure analysis, and trip report. Prepare and deliver Failure Analysis technical report IAW CDRL A028, test report IAW CDRL A032, and trip report IAW CDRL A020.

e. Provide on-the-job training to responsible maintenance and operator personnel. Specific training required will be identified at the contract level.

3.4 LOGISTICS SUPPORT (1000, 1001, 1002, 1004, 1005, 1006). The Contractor shall provide the following logistics, configuration management and material control services for new and modified

Cooperative ID, NCTR, and ATC systems and subsystems as required by individual task orders. The

Contractor shall record inventory and shipping of items in the division’s data repositories and track via the Naval Supply Weapons System Support (NAVSUP-WSS) Commercial Asset Visibility (CAV)

Program. The Contractor shall track all inventory items via Unique Identification (UID) or Item UID

(IUID) technology. The Contractor shall comply with the requirement for a Unique Item Identifier (UII) as outlined in DoD Instruction 4151.19. The Contractor shall:

a. Develop or review strategies for system requirements considering geographic area of deployment, equipment requirements, supportability, equipment/system interoperability, equipment/material availability, procurement lead-times, and inventory and stocking requirements. Prepare and deliver technical report IAW CDRL A004.

b. Provide design and feasibility analysis of proposed logistics elements for new, existing, and refurbished/modified systems and subsystems.

c. Prepare and deliver the following technical input to engineering change proposals IAW CDRL

A001:

1. Cost estimates

2. Technical documentation changes

3. Logistics data

d. Develop, review, or provide analysis of maintenance and repair concepts and plans, and reliability plans and reports. Prepare and deliver technical report IAW CDRL A004.

e. Develop recommended changes to various provisioning parts lists for spare and repair parts, support and test equipment, and long lead-time items based on component and system design changes. The

Government will deliver Provisioning Parts Lists as Government Furnished Information (GFI) with each request for development of recommended changes unless previously provided.

f. Review and provide recommendations to the Government on Logistics Support Analysis (LSA) documentation. Prepare and deliver Logistics Support Analysis Record (LSAR) Data IAW MIL-PRF-

49506 and CDRL A011.

g. Review Provisioning Technical Documentation in light of in-service engineering efforts, and provide recommendations and input for incorporation into Government documentation. Prepare and deliver technical report IAW CDRL A010. Review, analyze, evaluate the effectiveness of achieved logistics support, develop recommended engineering improvements to logistic support items, and provide a technical report demonstrating completion. Prepare and deliver technical report IAW CDRL A004.

h. Develop, review, and provide equipment requirements and delivery schedules for test and integration of systems. Prepare and deliver technical report IAW CDRL A004. Provide handling, transportation, equipment storage and Field Changes support.

i. Maintain access for at least three people to NAVSUP-WSS and Defense Logistics Agency (DLA) data repositories. COR approval is required to allow access of more than three people.

j. Provide configuration management support of systems and equipment, including:

(1) Maintain configuration status and field change status accounting databases for currently deployed equipment as specified by the Government.

(2) Perform physical configuration audits to verify that the as-built configuration of the equipment and software conforms to the engineering documentation and provide report. Recommend corrective actions for audit discrepancies. Prepare and deliver audit report IAW CDRL A034.

k. Provide material control for IDS Division equipment, components and support equipment, including:

(1) Maintain libraries of hardcopies, software publications relating to supply procedures, national stock requisitioning data and provisioning data.

(2) Maintain liaison with NAWCAD material control representatives to monitor status or modify open requisitions and to provide documentation, packaging and transportation for outgoing shipments.

Investigate and report on overdue requisitions. Prepare and deliver ad hoc requisition status report.

Establish an account with an express package delivery service to handle emergency requirements.

(3) Maintain physical control of material received until issued for project requirements. Maintain record of material receipt and issue for all equipment and parts. Provide on-site support for the general operation of the storage facility noted in paragraph 9.2.

(4) Maintain pre-expended bins of selected system repair parts. Provide inventory control of the bins, and provide data inputs for the upkeep of inventory control records. Inventory control records shall be prepared and delivered IAW CDRL A007.

(5) Schedule and coordinate turn-in of test equipment. Obtain approval from cognizant project technicians and engineers of pending turn-in of Government assets, update and maintain test equipment disposition list.

(6) Support documentation/storage of hazardous materials such as batteries, solder and solder station consumables (flux, alcohol, etc.).

(7) Perform analysis to determine replacement components for obsolete items or other items that fall under the heading of Diminishing Manufacturing Sources and Material Shortages (DMSMS), and provide quarterly DMSMS obsolescence report. Prepare and deliver technical report IAW CDRL

A008.

(8) Monitor the Commercial Asset Visibility database, validate requirements, and process requisitions passed by NAVSUP-WSS for selected items.

(9) In alternating years, conduct and document a wall-to-wall inventory of all Government-owned end items and spare assemblies, and repair and replacement parts noting the applicable system, quantity, location, condition, and custodian of each line item. Prepare and deliver Material Inventory End Item and Spare Assembly report IAW CDRL A012, and Material Inventory Repair and Replacement Parts report IAW CDRL A013.

3.5 REPAIR AND VALIDATION SUPPORT (1000, 1001, 1002, 1003, 1006). The Contractor shall provide the following bench repair and validation services for Cooperative ID, NCTR, and ATC equipment, systems and subsystems as required by individual task orders. The Contractor shall:

a. Inspect all equipment received to determine its condition and the scope of repairs needed. Develop a repair plan for each piece of equipment including serial number, problem assessed, required action, anticipated completion date and any other pertinent data. Prepare and deliver technical report IAW

CDRL A014.

b. Perform equipment refurbishment IAW division work instructions and/or Quality Control

Inspection Procedures (QCIP), including the removal, repair or replacement, and integration of equipment components into a fully operational system and, as necessary, repaint, silkscreen and fabricate broken and/or missing hardware. Provide cable production and installation in support systems refurbishment

c. Test each individual component or system IAW appropriate technical manuals, maintenance standards and test plans. Correct all mechanical and electrical defects before the equipment is re-deployed.

Document all testing in conformance with the IDS Division's and the Contractor's quality assurance plans. Prepare and deliver test plans IAW CDRL A031, and test report IAW CDRL A032.

d. Ensure that all Navy-owned Test and Measurement Diagnostic Equipment (TDME), Precision

Measuring (PME), and GPETE in the custody of the Contractor have current and accurate METCAL tags and/or labels. Coordinate the calibration or removal from service of any TDME, PME, or

GPETE meeting the end of its calibration cycle with the applicable Branch METCAL coordinator IAW

NAVAIRWARCENACDIV Instructions 13640.1A (TDME/PME) and 13900.2A (GPETE).

3.6 TRAINING SUPPORT (1000, 1001, 1002, 1003, 1006). The Contractor shall conduct systems training courses or seminars, and provide training materials such as maps, charts, slides, textbooks, handbooks, readers, and tests as required by individual task orders. The Contractor shall:

a. Prepare and update training outlines, which shall include information from technical manuals, standards, and other applicable references, and associated materials. Prepare and deliver Training

Program Structure Development report IAW CDRL A016.

b. Schedule and conduct classroom and laboratory training sessions from outlined material. Disseminate training material, knowledge, skills and competencies required to troubleshoot, repair, and optimally maintain the associated equipment under instruction. Provide training at NAWCAD St. Inigoes or other sites (possibly OCONUS).

c. Provide support for security escort requirements for visitors, foreign and domestic, attending training on-board NAWCAD Patuxent River or St. Inigoes. The following are examples of the estimated course information:

APPROXIMATE DESCRIPTION SITE LENGTH

AN/TPX-42A(V)14 St. Inigoes 3 Weeks

AN/UPX-29(V) Maintenance Course St. Inigoes 5 Weeks

AN/UPX-29A(V) Difference Course St. Inigoes 1 Week

AN/UPX-36(V) Various 1 Week

Fleet IFF Various 1 to 4 Weeks

d. Prepare and deliver technical report IAW CDRL A015 upon completion of instruction, to include the following:

(1) Number of students attending

(2) Materials the students received

(3) Number of troubleshooting problems the students completed

(4) Names of students

(5) Activity name and identifier

(6) Exam scores

(7) Pass/Fail Status

(8) Identification of problems

(9) Suggestions for course updating and improvements

(10) Students critiques of course and instructors

e. Provide technical support for the formal systems training program including technical reviews of training material, supplemental training material development, staffing and distribution program reviews, training audits, and deliver comments and recommendations in an ad hoc report. Provide and deliver updated Navy Training Systems Plan (NTSP) IAW CDRL A009.

Provide on-site personnel with training on the nature and extent of changes and their effect on performance, operations, and maintenance for installation of new, overhauled or modified equipment and Engineering

Change Proposals (ECPs) and field change kits.

3.7 LAB MAINTENANCE (1000, 1001, 1002, 1003, 1006). The Contractor shall maintain and upgrade system test beds and laboratories at NAWCAD, St. Inigoes as required by individual task orders.

The Contractor shall maintain all test beds and laboratories to reflect the latest systems configuration, and keep in working order through preventive and corrective maintenance. The Contractor shall develop operational procedures for the labs for Government review and approval. The Contractor shall prepare and deliver a technical report IAW CDRL A017. The contractor shall maintain a system failure log and a list of significant systems-related publications, associated engineering materials, and engineering network equipment for each laboratory. The test beds and laboratories requiring maintenance by the contractor include, but are not limited to the following:

OE-120 Designated Overhaul Point Lab

AIMS Repair Lab

AN/TPX-42A(V) Integration and Maintenance Lab

AIMS Production Lab

Shore ATC Lab

STARS OSF (Operational Support Facility) Lab

Mark XIIA Mode 5 Hardware/Software Lab

AN/UPX-36(V) Labs

WMSL 751 Lab

AN/UPX-29(V) Repair Lab

AN/UPX-24(V) Mode 5/S Design Lab

AN/UPX-29(V) ISEA Labs

AN/UPX-29(V) Production Lab

3.8 QUALITY ASSURANCE (1000, 1001, 1002, 1003, 1004, 1005, 1006). The Contractor shall have at contract award, and shall maintain, a quality management system per the International Organization of Standards (ISO 9001:2008) for all work performed at the Contractor’s facilities, St. Inigoes and Willows

Run facilities. The Government reserves the right to require the Contractor to present its certificate of ISO

9001:2008 compliance at any time.

3.8.1 Quality Assurance Surveillance Plan (QASP). The Government shall monitor the Contractor’s performance under this contract IAW the Government’s QASP, Attachment 1. The COR and/or Technical Point of Contact

(TPOC) will assess product quality and timeliness based on performance standards set forth in the QASP, utilizing the monitoring methods identified therein.

3.9 TECHNICAL MANAGEMENT SUPPORT (1000, 1001, 1002, 1003, 1004, 1005, 1006).

The Contractor shall provide technical management support during all phases of design, development, acquisition, and ensure proper program execution as required by individual task orders. The Contractor shall:

a. Prepare inputs to and/or draft program plans and Plan of Objectives, Actions and Milestones

(POA&Ms) for review by Government personnel and deliver IAW CDRL A019.

b. Analyze program cost, and schedule performance and determine the effect of current performance on overall program schedule and resource requirements for review by Government personnel. For each task, prepare and deliver Engineering and Technical Services Report IAW CDRL A021, and

Performance and Costs IAW CDRL A025.

c. Analyze program acquisition strategies and determine the cost benefit(s), if any, of integrating acquisition requirements for review by Government personnel. Prepare and deliver technical report

IAW CDRL A019.

d. Translate technical requirements and program constraints into inputs for acquisition documentation.

Maintain contract deliverable status to ensure integration of receipt or non-receipt into related schedule information. Prepare and deliver technical report IAW CDRL A019.

e. Generate and produce presentation materials (including viewgraphs and other briefing materials) to support program/project requirements. Prepare and deliver briefs IAW CDRL A030.

f. Attend meetings/conferences with Government personnel to gather information to support program/project requirements. Track and report on action items resulting from meetings, training, and other activity requests. Prepare and deliver technical report IAW CDRL A019.

3.10 FIELD TEAMS (1000, 1002, 1003, 1004, 1005, and 1006). The Contractor shall establish field teams at the following locations to support the Fleet.

a. Norfolk, VA. Provide three people to support INSURV, pre-certification inspections, field change installations and Fleet IFF technical assistance of locally deployed Fleet IFF and

AN/UPX-29(V) systems IAW PWS paragraphs 3.1, 3.2 and 3.3.

b. San Diego, CA. Provide one person to support AN/TPX-42A(V) SATC systems of locally deployed

Fleet IFF and AN/UPX-29(V) systems IAW PWS paragraphs 3.1, 3.2, and 3.3.

c. Pascagoula, MS. Provide support to shipyard testing of newly installed IFF and AN/UPX-29(V) systems

IAW PWS paragraphs 3.1, and 3.2.

d. Bath, ME. Provide support to shipyard testing of newly installed Fleet IFF and AN/UPX-

29(V) systems IAW PWS paragraphs 3.1, and 3.2.

e. Moorestown, NJ. Provide support to AN/UPX-29(V) developmental efforts on the AEGIS combat systems evolution at the Combat System Engineering Development Site (CSEDS)

IAW PWS paragraph3.1.

3.11 FMS SUPPORT (CLIN 1004). The Contractor shall interact with Lockheed Martin

Corporation's FMS/International Logistics Program Support when their personnel are required to forward shipments of the AN/UPX-29(V) as required by individual task orders. The Contractor shall assist in shipping and receiving of components and parts as required via other countries as part of providing parts and assistance to United States vessels that are located in and around those countries.

3.12 WORKMANSHIP SPECIFICATION (1000, 1001, 1002, 1003, 1004, 1005, and 1006). This specification supersedes any other requirement on the part drawing or specification. All soldering and assembly on items supplied for this Contract shall be in compliance with the class of use as defined below.

Unless otherwise specified, the requirements of this clause are not imposed on the procurement of

Commercial-Off-The-Shelf (COTS) or catalog type assemblies and subassemblies. Contractor’s use of a higher class of soldering standard than required is acceptable, unless it increases cost. Contractor may use its own workmanship standard in place of the imposed requirement if the standard is submitted to and approved by NAWCAD 4.11.2 as equal to or higher than the imposed requirement. The Contractor shall ensure that items supplied for this Contract have passed inspection by the Contractor's Quality Assurance department for applicable class of IPC/EIA J-STD-001. The classes of use are:

1. Products where the major requirements are functions of the completed assembly: All soldering and assembly shall be in compliance with IPC/EIA J-STD-001, Class 1 requirements.

2. Products where continued performance and extended life is required, and for which uninterrupted service is desired, but not critical: All soldering and assembly shall be in compliance with IPC/EIA J -STD-

001, Class 2 requirements. (Typically, the end use environment will not cause failures.)

3. Products where continued high performance or performance-on-demand is critical, equipment downtime cannot be tolerated, end-use environment may be uncommonly harsh, and the equipment must function when required, such as life support or other critical systems: All soldering and assembly shall be in compliance with IPC/EIA J-STD-001, Class 3 requirements.

4. Products where NAWCAD soldering standards are specified: All soldering and assembly shall be in compliance with IPC/EIA J-STD-001, Class 3 requirements.

4.0 CONTRACT…