Vendor_Questions.docx

N00174-18-R-0005 ASM Hand Grenades – QUESTIONS FROM VENDORS

1. Pg 18, SOW Para 2.0 Required Documents: When comparing the drawings under Method 2, it says to use Rev-D. When looking at the drawings provided, it appears that the drawing, Doc 430-174-00013, is Rev-E.

The other question is about Pressurized testing requirement. [The Vendor] cannot find a Mil-Spec, or some sort of specification that details the parameters of the test.

ANSWERS: (Revised documents uploaded to FBO.GOV)

- Pg 18, Para 2.0 Documents: Method I for Body and Cap Assembly should read, "430-174-0013 REV D"; Method II Body and Cap Assembly should read, "430-174-0013 REV E"

- In the Technical drawing attachment, Pg 9 Body and Cap Assembly is actually the REV E copy; the Government is in the process of updating that drawing to correct the drawing to read "E" instead of "D".

- For pressure testing, the p.s.i. requirements are listed in the 'Notes:' on the appropriate drawings in the technical package. REV D is 15 p.s.i. for a minimum of 5 seconds; and REV E is 30 p.s.i. for a minimum of 5 seconds.

2. I see these drawings are from +-2006. For planning/cost purposes will they be available on cad; If so what format?

Or will we have to recreate the electronic versions to make them machine ready?

ANSWERS:

The drawing files are in ProE/Creo. The files could be provided during the solicitation process upon request. However, it may take some time to prepare them as they are held in CAD/PAD and may be difficult to get quickly. We are working to have copies available as of the time of this Amendment.

In all cases, the files can be provided as Pro files or converted to a standard file type, i.e. stl or step.