The file's text, extracted by GovTribe without its formatting.
N0017418R0005
| ASM Hand Grenade MOD 0 |
| Document Number |
| Document Title |
| 430-174-0005 REV B |
| Adapter |
| 430-174-0006 REV D |
| Body |
| Method I |
| 430-174-0007 REV D |
| Base Cap |
| 430-174-0013 REV C D |
| Body and Cap Assembly |
| 430-174-0006 REV E |
| Body |
| Method II |
| 430-174-0007 REV E |
| Base Cap |
| 430-174-0013 REV D E |
| Body and Cap Assembly |
2.1 General Specifications & Standards
The following is a list of general specifications & standards for manufacture of the ASM Hand Grenade machined metal hardware components:
| Document Number |
| Document Title |
| ANSI/NCSL Z540-1 |
| Calibration Systems Requirements |
| ASME Y14.100 |
| Essential Requirements and Reference Documents applicable to the preparation and revision of engineering drawings and associated lists |
| ASME Y14.24 |
| Drawing Types and Applications of Engineering Drawings |
| ASME Y14.34 |
| Minimum requirements for the preparation and revision of application lists |
| ASME Y14.41 |
| Requirement for model-based definition upon CAD software |
| ASQC-8402 |
| Quality Assurance Terms & Definitions |
| EIA-649 |
| Configuration Management Requirements For Defense Contracts |
| ISO 10012-1 |
| Quality Assurance Requirements for Measuring Equipment |
| ISO 9001:2008 |
| Quality System |
| MIL-HDBK-61A |
| Configuration Management Guidance |
| MIL-STD-1916 |
| DOD Preferred Methods for Acceptance of Product |
| MIL-STD-2073-1 |
| DOD Materiel Procedures for Development and Application of Packaging Requirements |
| MIL-STD-31000 |
| DoD Standard Practice: Technical Data Packages |
| MIL-STD-40001 (AT) |
| Preparation of Final Inspection Record (FIR) |
* Copies of Government documents are available online at http://assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.
2.2 Data Item Descriptions
Unless otherwise specified, the following documents of the issue listed, form a part of this SOW and are to be used for general guidance only.
| DI-ADMN-81505 | Report, Record of Meeting/Minutes |
| DI-MISC-80678 | Certification and Data Report |
| DI-MGMT-80368A | Status Report |
| DI-QCIC-80809B | Test/Inspection Report |
| DI-QCIC-80553A | Acceptance Test Plan |
| DI-QCIC-81068 | End Item Final Inspection Record (FIR) |
| DI-QCIC-81794 | Quality Assurance Program Plan |