Drawing_430-174-0013_Rev_E.pdf

ALL OTHER CHARACTERISTICS

1 CS4/17/06INITIAL RELEASE WITH SIGNATURESA

MAH1/23/08SEE ECP IH08025B

TEK6/25/10SEE ECP IH10062C

6/29/17E SEE ECP TBD

1 2 NONE

430-174-001314083

BODY AND CAP ASSEMBLY

DEPARTMENT OF THE NAVY

INDIAN HEAD EOD TECHNOLOGY DIVISION

INIDIAN HEAD, MD 20640

DRAWN

CHECKED

ENGINEER

ENGINEER

SAFETY

NAVAL SURFACE WARFARE CENTER

INDIAN HEAD EOD TECHNOLOGY DIVISION

INDIAN HEAD, MD 20640

MATERIAL:

0.5 0.001

0.01

430-174-0003

4 AR TYPE III OR IV A-A-208 INK, MARKING, STENCIL YELLOW, COLOR

NO. 33538

3 AR 2V507 7545A661 SILICONE RUBBER ADHESIVE SEALANT, RTV-103

2 1 430-174-0007 BASE, CAP

1 1 430-174-0006 BODY

FIND

NO

QTY

REQ

CAGE

CODE

PART OR

IDENTIFYING NO

SPECFICIFCATION NOMENCLATURE OR DESCRIPTION MATERIAL

OR NOTE

PARTS LIST

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR

CONTRACTORS. ADMINISTRATIVE OR OPERATIONAL USE. 2005-JAN-04. OTHER

REQUESTS FOR THIS DOCUMENTS SHALL BE REFERED TO COMMANDER, INDIAN

HEAD DIVISION, NAVAL SURFACE WARFARE CENTER, 101 STRAUSS AVENUE

INDIAN HEAD, MD, 20640-5035

DISTRIBUTION STATEMENT C:

NOTES:

1. INTERPRET DRAWING IN ACCORDANCE WITH ASME Y14.100. APPENDIX B-E.

2. ASSEMBLE BODY, FIND NO 1., TO BASE CAP, FIND NO. 2, USING ADHESIVE, FIND NO. 3

(C1) A. ENSURE ADHESIVE BEAD IS APPLIED AROUND ENTIRE 360 CIRCUMFERENCE OF BODY AND IS FULLY VISIBLE, B. REMOVE EXCESS ADHESIVE AND RESIDUE USING ETHYL ALCOHOL OR EQUIVALENT

C. CURE FOR 24 HOURS.

3. FILL MACHINE HOLE COMPLETELY USING ADHESIVE, FIND NO. 3. REMOVE EXCESS ADHESIVE AND RESIDUE USING ETHYL ALCOHOL OR EQUIVALENT.

(M101) 4. AFTER CURING FOR 24 HOURS, PRESSURE TEST TO 30 PSI FOR A MINIMUM OF FIVE SECONDS.

5. APPLY 0.375" STRIPE TO TOP OF ASSEMBLY USING INK, FIND NO. 4, IN ACCORDANCE WITH MIL-STD-709, AT LOCATION SHOWN.

CAD MAINTAINED CHANGES

SHALL BE INCORPORATED BY

THE DESIGN ACTIVITY.

5.

SECTION A-A

2 3

3.

SEE DETAIL ASEE DETAIL A

TEK

TEK

4/11/12D SEE ECP IH12023

kimberly.peranich Typewritten Text Brian Amato kimberly.peranich Typewritten Text

2 2 NONE

SCALE 8.000

DETAIL A

SPACE BETWEEN THE CAP AND BODY

MUST ALL BE FILLED WITH ADHESIVE

TO INCLUDE THE BEAD SHOWN ON

THE INNER DIAMTER OF THE BODY

AND CAP INTERFACE