Waterfront_Services_-_GWSRP_CDRLS_7-13-12_S.pdf

PDF 1 MB Posted Jan 22, 2016

Attached to: Gun Weapon System Repair Program (GWSRP) Waterfront Support Services
Solicitation number: N00174-16-R-0001
Issued by: Department of the Navy Naval Sea Systems Command

About this file

From the source

Contract Data Requirements List

View the file

Other files

File	Type	Posted
Amendment0001.pdf	PDF	Feb 9, 2016
GWSRP_-_PERSONNEL_QUALIFICATIONS.docx	DOCX document	Jan 22, 2016
DD254N0017416R0001.pdf	PDF	Jan 22, 2016
PastPerformanceQuestionnaireSept2013.doc	DOC document	Jan 22, 2016
GWSRP_-_CSF_rev2.xlsx	XLSX spreadsheet	Jan 22, 2016
SanDiegoWGD.pdf	PDF	Jan 22, 2016
Appendix_H_TS9090-310G_Approved_2015-2-12.pdf	PDF	Jan 22, 2016
ContractAdministrationPlanSolicitation.doc	DOC document	Jan 22, 2016
WaterfrontSupportQASP1.doc	DOC document	Jan 22, 2016
MIL-STD-31000.pdf	PDF	Jan 22, 2016
MIL-STD-129P_Military_Marking_for_Shipment_ _Storage.pdf	PDF	Jan 22, 2016
N0017416R0001Final.pdf	PDF	Jan 22, 2016
PastPerformanceMatrixrev3.doc	DOC document	Jan 22, 2016
NorfolkWGD.pdf	PDF	Jan 22, 2016

Show all 14

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT DATA REQUIREMENTS LIST (CDRL)

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ____ TM _____ OTHER _________________________

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

TOTAL PRICE

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

REQUIRED

a. ADDRESSEE

b. COPIES

8. APP CODE

11. AS OF DATE 13. DATE IF SUBSEQUENT SUBM.

Draft

Final

Reg Repro

16. REMARKS

15. TOTAL ▬▬▬▬►

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 1 of 9 Pages frederick.wagoner Typewritten Text A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

MISC

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

GUN WEAPON SYSTEM REPAIR PROGRAM

frederick.wagoner Typewritten Text

TBD

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text A001 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

TECHNICAL REPORT - STUDY/SERVICE

DI-MISC-80508B SEE BLK 16

frederick.wagoner Typewritten Text

SOW PARA 4.7.1

frederick.wagoner Typewritten Text

NSWC IHD G3

frederick.wagoner Typewritten Text N/A frederick.wagoner Typewritten Text N/A frederick.wagoner Typewritten Text D frederick.wagoner Typewritten Text

ASREQ

frederick.wagoner Typewritten Text

ASREQ

frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

GWSRP MGR

frederick.wagoner Typewritten Text BLK 4: DI-MISC-80508B - DELETE PARAGRAPH 2 (b).

frederick.wagoner Typewritten Text

Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 9: TECHNICAL DATA SHALL BE MARKED WITH THE FOLLOWING

DISTRIBUTION STATEMENT IAW DOD 5230.24:

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD

AND DOD CONTRACTORS ONLY; OPERATIONAL USE; 09 JULY 2012.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO

THE NAVAL SURFACE WARFARE CENTER, INDIAN HEAD DIVISION,

PICATINNY DETACHMENT, CODE G3.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text BLKs 12, 13: SUBMIT TECHNICAL REPORTS IAW SPECIFIC TASK

ORDER REQUIREMENTS.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 16: SUBMIT DATA IN DIGITAL FORMAT COMPATIBLE WITH

MS OFFICE/WORD 2007. MEDIA AS MUTUALLY AGREED UPON.

frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text

F.G.WAGONER G31/CTR

frederick.wagoner Typewritten Text

12JUL09

frederick.wagoner Typewritten Text

ROBERT HOWLETT NSWCIHD G31

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE CDRL ATTACHEMENT #1 FOR GLOSSARY AND ADDRESSEES.

frederick.wagoner Typewritten Text

LMCD - 2035 - G31 - 12

robert.howlett Text Box

12JUL13

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

Final

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 2 of 9 Pages

Typewritten Text A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SESS

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

GUN WEAPON SYSTEM REPAIR PROGRAM

frederick.wagoner Typewritten Text

TBD

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text A002 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

DI-SESS-81000D SEE BLK 16

frederick.wagoner Typewritten Text

SOW PARA 4.7.2

frederick.wagoner Typewritten Text

NSWC IHD G3

frederick.wagoner Typewritten Text

frederick.wagoner Typewritten Text A frederick.wagoner Typewritten Text D frederick.wagoner Typewritten Text

ASREQ

frederick.wagoner Typewritten Text

ASREQ

frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

GWSRP MGR

frederick.wagoner Typewritten Text

BLK 4: SEE ATTACHED TDP WORKSHEET AND TAILORING.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text 1 1 0 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 9: TECHNICAL DATA SHALL BE MARKED WITH THE FOLLOWING

DISTRIBUTION STATEMENT IAW DOD 5230.24:

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD

AND DOD CONTRACTORS ONLY; OPERATIONAL USE; 09 JULY 2012.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO

THE NAVAL SURFACE WARFARE CENTER, INDIAN HEAD DIVISION,

PICATINNY DETACHMENT, CODE G3.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text BLKs 12, 13: SUBMIT ENGINERING DRAWINGS IAW SPECIFIC TASK

ORDER REQUIREMENTS.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 16: SUBMIT DATA IN DIGITAL FORMAT, SEE TDP WORKSHEET.

MEDIA AS MUTUALLY AGREED UPON.

frederick.wagoner Typewritten Text 1 1 0 frederick.wagoner Typewritten Text

F.G.WAGONER G31/CTR

frederick.wagoner Typewritten Text

12JUL09

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

PRODUCT DRAWINGS/MODELS AND

ASSOCIATED LISTS

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

ENGINEERING DRAWINGS

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK8: GWSRP MGR APPROVAL IS FOR FORMAT AND TECHNICAL

CONTENT; GOVERNMENT WILL REVIEW AND RETURN COMMENTS

NLT 45 DAYS AFTER RECIEPT; CONTRACTOR SHALL INCORPORATE

COMMENTS AND RESUBMIT WITH 30 DAYS OF RECEIPT.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

ROBERT HOWLETT NSWCIHD G31

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

LMCD - 2035 - G31 - 12

ATTACHMENT TO CDRL A002

TDP OPTION SELECTION WORKSHEET

SYSTEM: GWSRP DATE PREPARED: 09 JUL 2012

A. CONTRACT NO.

(TBD)

B. EXHIBIT/ATTACHMENT NO.

C. CLIN D. CDRL DATA

ITEM NO(s).

A002

1. TDP Level (X and complete as applicable .)

A. CONCEPTUAL LEVEL

DEVELOPMENTAL LEVEL

PRODUCTION LEVEL

B. REMARKS: See TAILORING NOTES

2. TYPE AND FORMAT (X all that apply and complete as applicable .)

TYPE 2D: 2D DRAWINGS

TYPE 3D: 3D MODELS ONLY

TYPE 3D: 3D MODELS WITH

ASSOCIATED 2D DRAWINGS

See TAILORING NOTES

NATIVE CAD See TAILORING NOTES____________________________________

ISO 10303 STEP FORMAT

ISO 32000 PORTABLE DOCUMENT FORMAT ________________________

OTHER ELECTRONIC FORMAT See TAILORING NOTES

HARDCOPY ___________________________________________________

REMARKS : ______________________________________________________

3. CAGE Code AND DOCUMENT

NUMBERS

A. CONTRACTOR CAGE AND DOCUMENT NUMBERS

GOVERNMENT CAGE (COMPLETE 3B & 3C OR 3D)

D. To Be Assigned By: NSWC IHD

G31 B. USE CAGE CODE: 53711 C. USE DOCUMENT NUMBERS:

4. DRAWING FORMATS (X one and complete as applicable)

CONTRACTOR FORMAT.

GOVERNMENT FORMAT.

REMARKS: USE FORMAT PROVIDED UNDER PREVIOUS ONTRACTS _________________________________________

5. TDP ELEMENTS REQUIRED (X all that apply )

ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR - OR THE FOLLOWING ARE REQUIRED:

CONCEPTUAL DRAWINGS/MODELS AND ASSOCIATED LISTS

DEVELOPMENTAL DESIGN DRAWINGS/MODELS AND ASSOCIATED LISTS

PRODUCT DRAWINGS/MODELS AND ASSOCIATED LISTS

COMMERCIAL DRAWINGS/MODELS AND ASSOCIATED LISTS

QUALITY ASSURANCE PROVISIONS

SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS/MODELS AND ASSOCIATED LISTS

SPECIAL TOOLING (ST) DRAWINGS/MODELS AND ASSOCIATED LISTS

SPECIFICATIONS

SOFTWARE DOCUMENTATION

SPECIAL PACKAGING INSTRUCTIONS (SPI) DRAWINGS/MODELS AND ASSOCIATED LISTS

6. ASSOCIATED LIST (X and complete as applicable) A. PARTS LIST (X ONE) (1) INTEGRAL (2) SEPARATE See TAILORING NOTES B. DATA LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED See TAILORING NOTES

C. INDEX LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED

D. WIRING LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED See TAILORING NOTES

E. INDENTURED DATA LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED

F. APPLICATION LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED

7. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable)

ASME Y14.100

ENGINEERING DRAWING

PRACTICES

WITH APPENDICES:

B C D E

ASME Y14.24 TYPES AND APPLICATIONS OF

ENGINEERING DRAWINGS See TAILORING NOTES

ASME Y14.34 ASSOCIATED LIST

ASME Y14.35M REVISION OF ENGINEERING DRAWINGS

AND ASSOCIATED LIST

ASME Y14.41 DIGITAL PRODUCT DEFINITION DATA

PRACTICES

ASME Y14.5 DIMENSIONING AND TOLERANCING

OTHER STANDARDS

APPLY AS DESCRIBED:

COMPANY STANDARDS

PERMITTED YES NO

8. OTHER TAILORING (Attach additional sheets as necessary)

SEE ATTACHED TAILORING NOTES.

LMCD - 2035 - G31 - 12

1. Drawings shall have an application block listing the drawing number of the next assembly and the Data List number in the “Next Assembly” and “Used On” columns respectively.

2. Title block and drawing format used shall be the approved format from the engineering drawings provided under previous contracts.

3. Metric dimensioning shall not be used.

4. All new drawings shall contain the notes “INTERPRET DWG IAW ASME Y14.100-

2004 (R 2010)” and “INTERPRET DIMENSIONING AND TOLERANCING IAW

ASME Y14.5 (2009)”.

5. Drawings shall specify identification marking of parts and assemblies using MIL-STD-

130N for guidance. Location, size and marking method shall be specified on the drawing. Whenever possible, the identification marking shall be located on the item so that visual observation is possible in the assembled condition.

6. Drawings shall be zoned in accordance with ASME Y14.1-2005 (R 2010).

7. Third angle orthographic projection shall be used on all drawings.

8. Except where specifically noted on the drawings, dimensions and tolerances of all parts and assemblies shall ensure complete interchangeability of like parts without selection or fitting.

9. When a circuit shown on a wiring, piping or logic diagram or on a schematic is continued on another sheet/drawing, it shall be referenced by zoning. It shall contain the zone and sheet number when the circuit is continued on another sheet of the same drawing; the applicable drawing number shall be added when the circuit is continued on another drawing.

10. NOT USED.

11. Drawings specifying screw/pipe threads shall identify thread designations in accordance with ASME Y14.6-2001 (R 2007) and specify the controlling thread requirement per ASME B1/B2 series of American National Standard, Military Specification or ISO Standard number for the type of thread depicted on the drawing.

12. The parts list of inseparable assembly drawings shall not contain cross reference information related to separate contractor format detail part drawings.

13. NOT USED.

14. Altered Item Drawings shall be in accordance with Figures 11 and 12 of ASME Y14.24-

1999, para. 6.1, except that the Figure 11 concept (page 29) may be used for standard parts (MS, AN, etc.) and vendor items.

15. NOT USED.

frederick.wagoner Typewritten Text

LMCD - 2035 - G31 - 12

frederick.wagoner Typewritten Text

16. Drawings shall specify test requirements sufficient to assure functional operation and adjustment for all assemblies (e.g., circuit board assemblies, gear trains, waveguide sections). Test requirements may be listed directly on the drawing or may reference an approved Government specification or standard. Unless approved by the procuring activity, test(s) shall not be dependent upon related assemblies, associated equipment or special test sets.

a. The drawing number assigned to the Test Requirement shall be the same as the drawing number assigned to the corresponding assembly drawing, prefixed with the letters “TR”.

b. The “TR” document shall be listed on the appropriate Assembly Data List (DL).

c. The following note shall be entered on the corresponding assembly drawing: “SEE TR XXXXXXX FOR TEST REQUIREMENTS”.

d. The cover or title sheet shall contain a statement describing the scope and purpose of the Test Specification.

e. Paragraph numbering is to be in accordance with MIL-STD-961, paragraph 4.13.

f. A Notice of Revision shall be prepared when an authenticated “TR” is revised.

17. All bulk material (paint, weld rod, solder, grease, ink, etc.) shall be listed on the parts list.

Plating and coating processes or the chemicals used in these processes shall not be listed.

18. The revision letter shall not be listed on Government specifications or standards (MIL, FED, DOD, MS, etc.) except where a specific paragraph is invoked from the particular specification or standard.

19. All contractor revision entries in the revision status block and revision symbols in the field of the drawing or list shall be removed from drawings and associated lists prior to government approval and NAVSEA Revision Control.

20. New drawings prepared as revised phototracings of existing drawings are acceptable if prepared in accordance with the engineering drawing practices and format of the previous existing master drawings except that referenced specifications and standards shall be updated to those which are currently applicable. Drawings prepared as revised phototracings of existing drawings shall meet the clarity requirements for drawing masters as stated in this attachment. These drawings shall contain the notes “INTERPRET DWG IAW (See Note 1)” and “INTERPRET DIMENSIONING AND TOLERANCING IAW” (See Note 2).

Note 1: Insert the applicable engineering drawing practices standard. Example MIL-STD-100E

Note 2: Insert the applicable dimensioning and tolerancing standard.

Example ASME Y14.5M-1982

LMCD - 2035 - G31 - 12

The selection of the engineering drafting practices and dimensioning and tolerancing standard shall be selected based on the requirements of Item 13.

21. General notes shall be located in the upper left corner of the first drawing sheet. The notes shall be numbered consecutively and downward starting with the number 1.

22. The addition of a suffix dash number to a drawing number shall be done only on a tabulated detail or tabulated assembly drawing.

23. Except for printed wiring board drawings, continuation sheets of multi-sheet drawings shall be the same size as the first sheet.

24. In accordance with ASME-Y14.1-2005 (R 2010), each continuation sheet of a multi-sheet drawing shall have a revision letter block located in the title block or a revision block located in the upper right corner of the sheet. Sheet 1 of multi-sheet drawings shall also have a revision status of sheets block.

25. Only nationally recognized industry association or Government standards shall be referenced on engineering drawings.

26. If “Find Numbers” are used on the field of the drawing for the purpose of cross-referencing to items on a parts list, the identification of the parts or subassemblies shall be itemized in an integral PL or in a table on the first sheet of the drawing.

27. Unless otherwise specified, the types of engineering drawings shall be IAW ASME

Y14.100- 2004 (R 2009) and ASME Y14.24-1999 (R 2010). Multi-detail, detail assembly, roll size and photographic drawings are prohibited. Installation drawings shall be furnished in accordance with ASME Y14.24, section 5.

28. Source Control, Vendor Item and Selected Item drawings shall identify all replaceable items by vendor part number or the equivalent Military Standard/Military Specification.

29. On Source Control and Vendor Item Drawings, source of supply information shall include the manufacturer’s name, CAGE Code and part number. For example:

XYZ COMPANY

CAGE CODE 06129

PART NO. PW609-6

30. All vendor or commercial items with the exception of microcircuits not developed at

Government expense shall be selected and documented in the following order of precedence:

(a) Nationally recognized Industry Standards

(b) Military Specifications/Standards

(d) Source Control Drawings frederick.wagoner Typewritten Text

LMCD - 2035 - G31 - 12

frederick.wagoner Typewritten Text

31. NOT USED.

32. A Data List (DL) shall be prepared at the top assembly level with subordinate DL’s for the major subordinate assemblies. Proposed DL’s shall require prior approval by (NSWCIHD Code G31). A DL shall also be prepared for an assembly which may be procured as an entity separate from the equipment with which it is to be assembled.

DL’s shall not be prepared for inseparable assemblies or any parts that would be considered a single item (an item with attaching hardware etc.)

33. From TDP Worksheet, Block 2A/B: New Drawings shall be CAD generated files compatible with PRO-E (version 18 or better) as mutually agreeable; Format as negotiated and mutually agreeable; media for digital data shall be CD-ROM unless otherwise mutually agreed upon.

34. From TDP Worksheet, Block 2B; Reproductions for review of draft copies, depending on the drawing media, shall be either blackline prints IAW MIL-D-5480, Type II, Class 2, or CAD files in “.dxf” format, or Adobe Acrobat (version 8 or better)“.pdf” files.

35. The revision level of the drawings shall be advanced when the drawing is placed under NAVSEA Revision Control.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner

LMCD - 2035 - G31 - 12

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

Final

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 3 of 9 Pages

Typewritten Text A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SESS

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

GUN WEAPON SYSTEM REPAIR PROGRAM

frederick.wagoner Typewritten Text

TBD

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text A003 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

DI-SESS-81625

frederick.wagoner Typewritten Text

SOW PARA 4.7.3

frederick.wagoner Typewritten Text

NSWC IHD G3

frederick.wagoner Typewritten Text

frederick.wagoner Typewritten Text A frederick.wagoner Typewritten Text D frederick.wagoner Typewritten Text

ONE/R

frederick.wagoner Typewritten Text N/A frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

GWSRP MGR

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text 1 1 0 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 9: TECHNICAL DATA SHALL BE MARKED WITH THE FOLLOWING

DISTRIBUTION STATEMENT IAW DOD 5230.24:

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD

AND DOD CONTRACTORS ONLY; OPERATIONAL USE; 09 JULY 2012.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO

THE NAVAL SURFACE WARFARE CENTER, INDIAN HEAD DIVISION,

PICATINNY DETACHMENT, CODE G3.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text BLKs 12, 13: SUBMIT IMPLEMENTATION PLAN IAW SPECIFIC TASK

ORDER REQUIREMENTS NLT 45DAC.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 16: SUBMIT DATA IN DIGITAL FORMAT COMPATIBLE WITH

M/S OFFICE 2007; MEDIA AS MUTUALLY AGREED UPON.

frederick.wagoner Typewritten Text 1 1 0 frederick.wagoner Typewritten Text

F.G.WAGONER G31/CTR

frederick.wagoner Typewritten Text

12JUL09

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

CONTRACTOR INTEGRATED TECHNICAL

INFORMATION SYSTEM IMPLEMENTATION PLAN

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

IMPLEMENTATION PLAN

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK8: GWSRP MGR APPROVAL IS FOR TECHNICAL CONTENT;

GOVERNMENT WILL REVIEW AND RETURN COMMENTS

NLT 30 DAYS AFTER RECIEPT; CONTRACTOR SHALL INCORPORATE

COMMENTS AND RESUBMIT WITH 30 DAYS OF RECEIPT.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

ROBERT HOWLETT NSWCIHD G31

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

LMCD - 2035 - G31 - 12

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text robert.howlett

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

Final

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 4 of 9 Pages

Typewritten Text A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

MGMT

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

GUN WEAPON SYSTEM REPAIR PROGRAM

frederick.wagoner Typewritten Text

TBD

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text A004 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

DI-MGMT-81834

frederick.wagoner Typewritten Text

SOW PARA 4.7.4

frederick.wagoner Typewritten Text

NSWC IHD G3

frederick.wagoner Typewritten Text B frederick.wagoner Typewritten Text

MTHLY

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

GWSRP MGR

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 9: TECHNICAL DATA SHALL BE MARKED WITH THE FOLLOWING

DISTRIBUTION STATEMENT IAW DOD 5230.24:

DISTRIBUTION STATEMENT B. DISTRIBUTION AUTHORIZED TO US

GOVERNMENT AGENCIES ONLY; ADMINISTRATIVE USE;09 JULY 2012.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO

THE NAVAL SURFACE WARFARE CENTER, INDIAN HEAD DIVISION,

PICATINNY DETACHMENT, CODE GWSRP.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text BLKs 12, 13: SUBMIT SECURITY LIST NLT 30DAC; MONTHLY UPDATES

ARE REQUIRED FOR THE DURATION OF THE CONTRACT.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 16: SUBMIT DATA IN DIGITAL FORMAT COMPATIBLE WITH

M/S OFFICE 2007; MEDIA AS MUTUALLY AGREED UPON.

frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text

F.G.WAGONER G31/CTR

frederick.wagoner Typewritten Text

12JUL09

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SECURITY LIST

CONTRACTOR'S PERSONNEL ROSTER

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

ROBERT HOWLETT NSWCIHD G31

frederick.wagoner Typewritten Text

LMCD - 2035 - G31 - 12

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text robert.howlett

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

Final

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 5 of 9 Pages

Typewritten Text A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

MGMT

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

GUN WEAPON SYSTEM REPAIR PROGRAM

frederick.wagoner Typewritten Text

TBD

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text A005 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

DI-MGMT-80368A

frederick.wagoner Typewritten Text

SOW PARA 4.7.5

frederick.wagoner Typewritten Text

NSWC IHD GWSRP

frederick.wagoner Typewritten Text B frederick.wagoner Typewritten Text

MTHLY

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

GWSRP MGR

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 9: TECHNICAL DATA SHALL BE MARKED WITH THE FOLLOWING

DISTRIBUTION STATEMENT IAW DOD 5230.24:

DISTRIBUTION STATEMENT B. DISTRIBUTION AUTHORIZED TO US

GOVERNMENT AGENCIES ONLY; CONTRACTOR PERFORMANCE

EVALUATION; 09 JULY 2012. OTHER REQUESTS FOR THIS

DOCUMENT SHALL BE REFERRED TO THE NAVAL SURFACE

WARFARE CENTER, INDIAN HEAD DIVISION, PICATINNY

DETACHMENT, CODE GWSRP.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 13: SUBMIT STATUS REPORT NLT 45DAC; MONTHLY

UPDATES ARE REQUIRED FOR THE DURATION OF THE CONTRACT.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 16: SUBMIT DATA IN DIGITAL FORMAT COMPATIBLE WITH

M/S OFFICE 2007; MEDIA AS MUTUALLY AGREED UPON.

frederick.wagoner Typewritten Text 0 2 0 frederick.wagoner Typewritten Text

F.G.WAGONER G31/CTR

frederick.wagoner Typewritten Text

12JUL09

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

STATUS, PROGRESS AND

MANAGEMENT REPORTS

STATUS REPORT

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

frederick.wagoner Typewritten Text N/A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text N/A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

NSWCIHD G31

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

ROBERT HOWLETT NSWCIHD G31

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

LMCD - 2035 - G31 - 12

frederick.wagoner Typewritten Text robert.howlett

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

Final

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 6 of 9 Pages

Typewritten Text A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

MGMT

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

GUN WEAPON SYSTEM REPAIR PROGRAM

frederick.wagoner Typewritten Text

TBD

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text A006 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

DI-MGMT-80508A

frederick.wagoner Typewritten Text

SOW PARA 4.7.6

frederick.wagoner Typewritten Text

NSWC IHD GWSRP

frederick.wagoner Typewritten Text D frederick.wagoner Typewritten Text

ASREQ

frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

GWSRP MGR

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 9: TECHNICAL DATA SHALL BE MARKED WITH THE FOLLOWING

DISTRIBUTION STATEMENT IAW DOD 5230.24:

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD

DOD CONTRACTORS ONLY; ADMINISTRATIVE USE;09 JULY 2012.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED

TO THE NAVAL SURFACE WARFARE CENTER, INDIAN HEAD

DIVISION, PICATINNY DETACHMENT, CODE GWSRP.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLKS 12 & 13: SUBMIT TRIP REPORTS IAW THE TASK ORDER(S);

SUBSEQUENT SUBMISSIONS IAW TASK ORDER REQUIREMENTS.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 16: SUBMIT DATA IN DIGITAL FORMAT COMPATIBLE WITH

M/S OFFICE 2007; MEDIA AS MUTUALLY AGREED UPON.

frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text

F.G.WAGONER G31/CTR

frederick.wagoner Typewritten Text

12JUL09

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

UNOFFICIAL TRIP REPORTS

TECHNICAL REPORT - STUDY/SERVICES

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

frederick.wagoner Typewritten Text N/A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

ROBERT HOWLETT NSWCIHD G31

ASREQ

LMCD - 2035 - G31 - 12

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text robert.howlett

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

Final

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 7 of 9 Pages

Typewritten Text A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

QCIC

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

GUN WEAPON SYSTEM REPAIR PROGRAM

frederick.wagoner Typewritten Text

TBD

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text A007 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

DI-QCIC-81794 SEE BLOCK 16

frederick.wagoner Typewritten Text

SOW PARA 4.7.7

frederick.wagoner Typewritten Text

NSWC IHD GWSRP

frederick.wagoner Typewritten Text D frederick.wagoner Typewritten Text

ASREQ

frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

GWSRP MGR

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 9: TECHNICAL DATA SHALL BE MARKED WITH THE FOLLOWING

DISTRIBUTION STATEMENT IAW DOD 5230.24:

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD

DOD CONTRACTORS ONLY; ADMINISTRATIVE USE;09 JULY 2012.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED

TO THE NAVAL SURFACE WARFARE CENTER, INDIAN HEAD

DIVISION, PICATINNY DETACHMENT, CODE GWSRP.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLKS 12 & 13: SUBMIT QUALITY ASSURANCE REPORT NLT 10 DAYS

AFTER THE END OF EACH TASK ORDER; SUBSEQUENT

SUBMISSIONS IAW INDIVIDUAL TASK ORDER REQUIREMENTS.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 16: SUBMIT DATA IN DIGITAL FORMAT COMPATIBLE WITH

M/S OFFICE 2007; MEDIA AS MUTUALLY AGREED UPON.

frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text

F.G.WAGONER G31/CTR

frederick.wagoner Typewritten Text

12JUL09

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

QUALITY ASSURANCE REPORTS

QUALITY ASSURANCE PROGRAM PLAN

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

frederick.wagoner Typewritten Text N/A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

ROBERT HOWLETT NSWCIHD G31

ASREQ

BLK 4: DI-QCIC-81794 - DELETE PARAGRAPHS 3.3 THROUGH 3.7,

3.9 AND 3.12.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

LMCD - 2035 - G31 - 12

robert.howlett

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

Final

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 8 of 9 Pages

Typewritten Text A frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

MISC

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

GUN WEAPON SYSTEM REPAIR PROGRAM

frederick.wagoner Typewritten Text

TBD

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text A008 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

DI-MISC-80678 SEE BLOCK 16

frederick.wagoner Typewritten Text SOW PARAs 4.7.8 & 8 frederick.wagoner Typewritten Text

NSWC IHD GWSRP

frederick.wagoner Typewritten Text D frederick.wagoner Typewritten Text

ASREQ

frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text

GWSRP MGR

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

SEE BLOCK 16

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text 0 1 0 frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLK 9: TECHNICAL DATA SHALL BE MARKED WITH THE FOLLOWING

DISTRIBUTION STATEMENT IAW DOD 5230.24:

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD

DOD CONTRACTORS ONLY; ADMINISTRATIVE USE;09 JULY 2012.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED

TO THE NAVAL SURFACE WARFARE CENTER, INDIAN HEAD

DIVISION, PICATINNY DETACHMENT, CODE GWSRP.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

BLKS 12 & 13: SUBMIT CONFORMANCE CERTIFICATION NLT 10 DAYS

AFTER EACH EQUIPMENT SHIPMENT; SUBSEQUENT SUBMISSIONS

IAW INDIVIDUAL TASK ORDER REQUIREMENTS.

frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text frederick.wagoner Typewritten Text

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.