ATT15_LaborCategories.docx

ATTACHMENT 15 LABOR CATEGORY DESCRIPTIONS

Field Engineer III

Install, set-up, rearrange, or remove switching, distribution, routing, and dialing equipment used in central offices or headends. Service or repair telephone, cable television, Internet, and other communications equipment on customers' property. May install communications equipment or communications wiring in buildings. Excludes “Telecommunications Line Installers and Repairers” (BLS 49-9052). Illustrative examples: Fiber Optic Central Office Installer, Private Branch Exchange (PBX) Installer and Repairer

Illustrative examples: Distribution Center Manager, Traffic Safety Administrator, Warehouse Manager

Illustrative examples: Logistics Analyst, Logistics Planner, Logistics Specialist

Illustrative examples: Business Management Analyst, Business Process Consultant, Industrial Analyst

Illustrative examples: Motion Study Technician, Production Control Technologist, Time Study Technician

Electronics Technician III (Labor Code 23183 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) The Electronics Technician Maintenance III applies advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering; changes. Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower level technicians.

Electronics Technician II (Labor Code 23182 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) The Electronics Technician Maintenance II applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers' manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required, from supervisor or higher-level technician.

Electronics Technician I (Labor Code 23181 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) The Electronics Technician Maintenance I applies basic technical knowledge to perform simple or routine tasks following detailed instructions, performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment; and taking test readings using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes. This person works under close supervision receiving technical guidance from supervisor or higher-level technician. Work is checked frequently for accuracy.

Laborer (Labor Code 23470 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) The Laborer performs tasks that require mainly physical abilities and effort involving little or no specialized skill or prior work experience. The following tasks are typical of this occupation: The Laborer loads and unloads trucks, and other conveyances, moves supplies and materials to proper location by wheelbarrow or hand truck; stacks materials for storage or binning, collects refuse and salvageable materials, and digs, fills, and tamps earth excavations, The Laborer levels ground using pick, shovel, tamper and rake, shovels concrete and snow; cleans culverts and ditches, cuts tree and brush; operates power lawnmowers, moves and arranges heavy pieces of office and household furniture, equipment, and appliance, moves heavy pieces of automotive, medical engineering, and other types of machinery and equipment, spreads sand and salt on icy roads and walkways, and picks up leaves and trash.

Welder (Labor Code 23960 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) This incumbent welds metal components together to fabricate or repair products, such as machine parts, plant equipment, mobile homes, motors and generators, according to layouts, blueprints or work orders, using brazing and a variety of arc and gas welding equipment. This worker welds metal parts together, using both gas welding or brazing and any combination of arc welding processes, performs related tasks such as thermal cutting and grinding, repairs broken or cracked parts, fills holes and increases size of metal parts, positions and clamps together components of fabricated metal products preparatory to welding. This worker may locate and repair cracks in industrial engine cylinder heads, using inspection equipment and gas torch, may perform repairs only and be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations.

Engineering Technician IV (Labor Code 30084 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) The Engineering Technician III performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. This technician performs at this level one or a combination of such typical duties as:

a. Constructing components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions;

b. Following specific layout and scientific diagrams to construct and package simple devices and subunits of equipment.

c. Conducting various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement, selecting, preparing, and operating standard test equipment and records test data;

d. Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc., processing data, identifying errors or inconsistencies, selecting methods of data presentation.

e. Assisting in design modification by compiling data related to design, specifications, and materials that are pertinent to specific items of equipment or component parts; developing information concerning previous operational failures and modifications, and using judgment and initiative to recognize inconsistencies or gaps in data and seek sources to clarify information.

Engineering Technician III (Labor Code 30083 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) The Engineering Technician III performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. This technician performs at this level one or a combination of such typical duties as:

a. Constructing components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions;

b. Following specific layout and scientific diagrams to construct and package simple devices and subunits of equipment.

c. Conducting various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement, selecting, preparing, and operating standard test equipment and records test data;

d. Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc., processing data, identifying errors or inconsistencies, selecting methods of data presentation.

e. Assisting in design modification by compiling data related to design, specifications, and materials that are pertinent to specific items of equipment or component parts; developing information concerning previous operational failures and modifications, and using judgment and initiative to recognize inconsistencies or gaps in data and seek sources to clarify information.

Engineering Technician II (Labor Code 30082 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) The Engineering Technician II performs standardized or prescribed assignments involving a sequence of related operations, follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments. Technical adequacy of routine work is reviewed on completion; non-routine work may be reviewed in progress. This technician performs at this level, one or a combination of such typical duties as:

a. Following specific instructions, assembles or constructs simple or standard equipment or parts, servicing or repairing simple instruments or equipment;

b. Conducting a variety of tests using established methods, preparing test specimens, adjusting and operating equipment, recording test data, and pointing out deviations resulting from equipment malfunction or observational errors;

c. Extracting engineering data from various prescribed but non-standardized sources, processing the data following well-defined methods including elementary algebra and geometry, and presenting the data in prescribed form.

Engineering Technician I (Labor Code 30081 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) This technician performs simple routine tasks under close supervision or from detailed procedures. Work is checked in progress or on completion. This person performs one or a combination of such typical duties as:

a. Assembling or installing equipment or parts requiring simple wiring, soldering, or connecting.

b. Performing simple or routine tasks or tests such as tensile or hardness tests; operating and adjusting simple test equipment; records test data.

c. Gathering and maintaining specified records of engineering data such as tests, drawings, etc.; performing computations by substituting numbers in specified formulas; plotting data and draws simple curves and graphs.

Drafter/CAD Operator IV (Labor Code 30064 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) This operator works closely with design originators, preparing drawings or computer models of unusual, complex, or original designs that require a high degree of precision, performs unusually difficult assignments requiring considerable initiative, resourcefulness, and drafting expertise. This incumbent assures that anticipated problems in manufacture, assembly, installation, and operation are resolved by the drawing produced, exercises independent judgment in selecting and interpreting data based on knowledge of the design intent. Although working primarily as a drafter, this worker may occasionally interpret general designs prepared by others to complete minor details, may provide advice and guidance to lower level drafters or serve as coordinator and planner for large and complex drafting projects.

Drafter/CAD Operator III (Labor Code 30063 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) This operator prepares complete sets of complex drawings or computer models that include multiple views, detail drawings, and assembly drawings. Drawings or models include complex design features that require considerable drafting skill to visualize and portray. Assignments regularly require the use of mathematical formulas to draw land contours or to compute weights, center of gravity, load capacities, dimensions, quantities of material, etc. The Draft/CAD Operator works from sketches, computer models, and verbal information supplied by an engineer, architect, or designer to determine the most appropriate views, detail drawings, and supplementary information needed to complete assignments. This operator selects required information from computer programs, and internet sites, precedents, manufacturers' catalogs, and technical guides. This operator independently resolves most of the problems encountered. Supervisor or design originator may suggest methods of approach or provide advice on unusually difficult problems. Typical assignments include:

a. Prepares complete sets of drawings of test equipment to be manufactured from layouts, models, or sketches. Several cross-sectional and subassembly drawings are required. From information supplied by the design originator and from technical handbooks and manuals, this operator describes dimensions, tolerances, fits, fabrication techniques, and standard parts to use in manufacturing the equipment.

b. From electronic schematics, information as to maximum size, and manuals giving dimensions of standard parts, determines the arrangement and prepares drawing of printed circuit boards.

c. From precedents, drafting standards, and established practices, prepares final construction drawings for floodgates, navigation locks, dams, bridges, culverts, levees, channel excavations, dikes and berms, prepares boring profiles, typical cross-sections, and land profiles; and delineates related topographical details as required.

d. Prepares final drawings for street paving and widening or for water and sewer lines having complex trunk lines; reduces field notes and calculates true grades. From engineering designs, lays out plan, profile and detail appur- tenances required; and notifies supervisor of conflicting details in design.

Excludes drafter performing work of similar difficulty to that described at this level but who provides support for a variety of organizations that have widely differing functions or requirements.

Warehouse Specialist (Labor Code 21410 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) As directed, the Warehouse Specialist performs a variety of warehousing duties that require an understanding of the establishment's storage plan. Work involves most of the following: verifying materials (or merchandise) against receiving documents, noting and reporting discrepancies and obvious damages, routing materials to prescribed storage locations; storing, stacking, or palletizing materials in accordance with prescribed storage methods, rearranging and taking inventory of stored materials, examining stored materials and reporting deterioration and damage, removing material from storage and preparing it for shipment. This worker may operate hand or power trucks in performing warehousing duties. Note: Exclude workers whose primary duties involve shipping and receiving work (see Shipping/Receiving Clerk), order filling (see Order Filler), or operating forklifts (see Forklift Operator).

Technical Writer II (Labor Code 30462 from Department of Labor (DoL) Service Contract Act (SCA) Directory of Occupations Fifth Edition) In this capacity, the Technical Writer revises or writes material that is mostly standardized for reports, manuals, briefs, proposals, instruction books, catalogs, and related technical and administrative publications concerned with work methods and procedures, and installation, operation, and maintenance of machinery and other equipment. The incumbent receives assignment and technical information from a supervisor or senior writer, may be provided notes or manuals containing operating procedures and details, and may observe production, developmental or experimental activities to expand or verify the provided operating procedures and details.

This worker accesses manufacturers' catalogs, drawings and other data relative to operation, maintenance, and service of equipment, may have access to blueprints, sketches, drawings, parts lists, specifications, mockups, and product samples to integrate and delineate technology, operating procedure, and production sequence and detail. This writer organizes material and completes writing assignment according to set standards regarding order, clarity, conciseness, style, and terminology, may maintain records and files of work and revisions, may select photographs, drawings, sketches, diagrams, and charts to illustrate material, assist in laying out material for publication, and arrange for typing, duplication and distribution of material. This writer may draft speeches, articles, and public or employee relations releases, or specialize in writing material regarding work methods and procedures.

N0003-17-R-0043

ATTACHMENT 15