CDRL B010 - MIL-STD-40051-2C.pdf

AMSC 9613 AREA TMSS

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

MIL-STD-40051-2C

15 December 2015

SUPERSEDING

MIL-STD-40051-2B

17 October 2012

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PREPARATION OF DIGITAL TECHNICAL INFORMATION

FOR

PAGE-BASED TECHNICAL MANUALS (TMs)

NOT MEASUREMENT

SENSITIVE

Source: https://assist.dla.mil -- Downloaded: 2022-03-18T18:21Z Check the source to verify that this is the current version before use.

MIL-STD-40051-2C

ii

FOREWORD

1. This standard is approved for use by the Department of the Army and the United States Marine Corps and is available for use by all Departments and Agencies of the Department of Defense (DOD).

2. This standard establishes the technical content requirements and mandatory style and format requirements for the preparation of technical manuals (TMs) and other types of equipment publications specified herein and subsequent revisions required to support the various types of equipment and weapon systems within the Department of the Army and the Marine Corps. The requirements contained in this standard cover operation (except aviation) and maintenance at all levels through overhaul (depot), including depot maintenance work requirements (DMWRs) and national maintenance work requirements (NMWRs). The requirements also cover destruction to prevent enemy use, battle damage assessment and repair (BDAR), lubrication orders (LOs), preventive maintenance checklists (PMCs), general maintenance manuals, and software manuals.

3. This two-part book form consists of the following parts.

MIL-STD-40051-1 — Preparation of Digital Technical Information for Interactive Electronic Technical Manuals (IETM)

MIL-STD-40051-2 — Preparation of Digital Technical Information for Page- Based Technical Manuals (TMs)

4. Comments, suggestions, or questions should be addressed to USAMC Logistics Support Activity, ATTN: AMXLS-AP, Bldg 3307, Redstone Arsenal, AL 35898 or emailed to usarmy.redstone.logsa.mbx.tmss@mail.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.dla.mil/.

iii

REVISION SUMMARY

This is a summary of the changes made in this revision. All technical changes are marked with vertical bars. Editorial changes (e.g., spelling corrections, grammar corrections, punctuation corrections, corrections to paragraph references, etc.) are not marked with vertical bars. Also, changes to the table of contents will not be marked with a vertical bar. Changes to Section 2 and to paragraph 3.1 in Section 3 are not marked with vertical bars due to large number of changes to them. The content selection matrixes in Appendix A have all been changed and will not be marked with vertical bars to avoid cluttering them. For figures, changes to the title and/or number will be marked with a vertical bar to the left of the figure title/number. When the content of the figure changes or when both title/number and contents change, the vertical bar will appear to the right of the figure number/title. For tables, when the number or title changes, a vertical bar will be marked with a vertical bar to the left of the number/title. Changed rows in the table will be marked with a vertical bar unless all rows are changed. If all rows are changed, a vertical bar will be placed to the right of the table number/title. If number or title changes and all rows are changed, a vertical bar will appear to the right of the table number/title. Below is a tabular listing with all the specific technical changes made which are marked with a vertical bar.

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

2 (Foreword) 2 (Foreword) Changed 4 (Foreword) 4 (Foreword) Changed

1.1 1.1 Changed

1.4 1.4 Changed Section 2 Section 2 Added/deleted/changed documents, source statements, URls, e-mail addresses, etc

3.1 3.1 Added, deleted, and changed acronyms and their definitions

* 3.6 Deleted

3.14 * Added

3.18 3.18 Changed

3.19 3.19 Changed

3.27 3.27 Changed format

3.28 3.28 Changed

3.29 3.29 Changed

3.30 * Added

3.31 * Added

3.35 3.33 Changed

3.37 3.35 Changed

3.38 3.36 Changed

3.40 * Added

3.43 * Added

3.45 3.41 Changed iv

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

3.46 3.42 Changed

3.50 * Added

3.61 3.56 Changed

3.64 3.59 Changed

3.65 * Added

3.70 3.64 Changed

* 3.69 Deleted

3.76 3.71 Changed

3.84 3.79 Changed

3.86 3.81 Changed

3.87 3.82 Changed format

3.88 3.83 Changed

3.89 3.84a(2)(a) Changed

3.90 3.85 Changed

3.93 3.88 Changed

3.94 * Added

* 3.89 Deleted

3.95 3.90 Changed

3.96 3.91 Changed

3.97 3.92 Changed

3.99 3.94 Changed

3.103 3.98 Changed

3.105 3.100 Changed

3.112 3.107 Changed

3.116 3.111 Changed

3.119 3.114 Changed

3.120 3.115 Changed

* 3.118 Changed

3.130 * Added

3.131 3.126 Changed

3.138 * Added

3.139 3.133 Changed

3.140 3.134 Changed

3.143 * Added

3.144 * Added

3.146 3.138 Changed

3.148 3.140 Changed

3.149 3.141 Changed

3.152 3.144 Changed

3.153 * Added

3.156 * Added

3.162 3.152 Changed v

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

4.1 4.1 Changed lead in and added Appendix M & N

4.2 4.2 Changed 4.2h 4.2h Changed 4.2i,j,&k * Added

4.3 4.3 Changed

4.4 4.4 Changed

4.5 4.5 Changed

4.6 4.6 Changed

* 4.7 Deleted

4.7.1 4.8.1 Changed

4.7.2.2 4.8.2.2 Changed

4.7.2.3 4.8.2.3 Changed

4.7.2.3.1 4.8.2.3.1 Changed 4.7.5a 4.8.5a Changed

4.7.7.1 4.8.7.1 Changed

4.7.7.2 4.8.7.2 Changed

4.7.7.3 4.8.7.3 Changed 4.7.7.4a(1),(2),(3),&(4) 4.8.7.4a(1),(2),(3),&(4) Changed 4.7.7.4b * Added 4.7.7.4h 4.8.7.4g Changed 4.7.7.4i 4.8.7.4h Changed 4.7.9.1a 4.8.9.1a Changed

4.7.9.3.1 4.8.9.3.1 Changed

4.7.9.4 4.8.9.4 Changed

4.7.9.4.2 4.8.9.4.2 Changed 4.7.9.4.2a 4.8.9.4.2a Changed 4.7.9.4.2b 4.8.9.4.2b Changed 4.7.9.4.2c 4.8.9.4.2c Changed

4.7.9.4.2 (last part) 4.8.9.4.2 (last part) Changed

4.7.9.4.3 * Added

4.7.9.4.4 4.8.9.4.3 Changed

4.7.9.4.5 * Added

4.7.9.4.6 4.8.9.4.4 Changed

4.7.9.4.7 4.8.9.4.5 Changed

4.7.9.4.8 4.8.9.4.6 Changed

4.7.9.4.10 4.8.9.4.8 Changed

4.7.9.4.11 4.8.9.4.9

4.7.11 4.8.11 Changed

4.7.12 4.8.12 Text deleted (last 2 sentences)

4.7.13.2 4.8.13.2 Changed

4.7.13.3 4.8.13.3 Changed vi

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

4.7.13.5 4.8.13.5 Changed

* 4.8.13.7d Deleted 4.7.13.7u * Added 4.7.13.7x * Added 4.7.13.7y * Added 4.7.13.7bb * Added

4.7.16 4.8.16 Changed

4.7.16.1 4.8.16.1 Changed 4.7.16.2.1.1e 4.8.16.2.1.1e Changed

4.7.17 4.8.17 Changed 4.7.17b 4.8.17b Changed

4.7.22.1.1 4.8.22.1.1 Changed

4.7.23.1 4.8.23.1 Changed

4.7.23.4 4.8.23.4 Changed

* 4.8.23.8 Deleted

4.7.23.10 4.8.23.11 Changed

4.7.23.11 * Added

4.7.27.1 4.8.27.1 Changed

4.7.27.2.3.3 4.8.27.2.3.3 Changed

4.7.27.2.5.1 4.7.27.2.5.1 Changed Table III Table III Changed

4.7.27.2.7 4.8.27.2.7 Changed

4.7.27.3.3 4.8.27.3.3 Changed

4.7.27.3.4 4.8.27.3.4 Changed 4.7.27.4.5.2a 4.8.27.4.5.2a Changed 4.7.27.4.5.2d * Added

4.8.1.1 4.9.1.1 Changed 4.8.1.1e 4.9.1.1e Changed 4.8.1.5g 4.9.1.5g Changed 4.8.1.6c&d 4.9.1.6c&d Changed 5.1a,b,&c 5.1a,b,&c Changed

5.2 5.2 Changed 5.2.1b 5.2.1b Changed

5.2.1.1 5.2.1.1 Changed 5.2.1.1c * Added 5.2.1.1e(1) * Added 5.2.1.1e(3) 5.2.1.1e(2) Changed

5.2.1.1.2 * Added

5.2.1.1.4 5.2.1.1.3 Changed

5.2.1.1.4.2 5.2.1.1.3.2 Changed

5.2.1.1.4.4 5.2.1.1.3.4 Changed

5.2.1.1.9 5.2.1.1.8 Changed

5.2.1.1.10 5.2.1.1.9 Changed vii

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

5.2.1.1.11 5.2.1.1.10 Changed

5.2.1.1.12.1 5.2.1.1.11.1 Changed

5.2.1.3 5.2.1.3 Changed

5.2.1.5 5.2.1.5 Changed

* 5.2.1.6.2c Deleted

* 5.2.1.6.4e Deleted

5.2.1.6.5 * Added

5.2.1.6.6 5.2.1.6.10 Moved and Changed

5.2.1.6.7 * Added

5.2.1.6.12 5.2.1.6.9 Changed 5.2.1.7.1a(1) 5.2.1.7.1a(1) Changed 5.2.1.7.1a(2)(a)&(b) 5.2.1.7.1a(2)(a)&(b) Changed

5.2.1.10.1 (Note) 5.2.1.10.1 (Note) Changed

5.2.3 5.2.2 Moved 5.2.3a(5) 5.2.2a(5) Changed 5.2.3b(5) 5.2.2b(5) Changed

5.2.4 * Added

5.2.4.1 * Added

5.2.4.2 * Added

5.2.4.3 * Added

5.2.4.4 * Added

* 6.2c Deleted

6.3 6.3 Changed Figure 1 Figure 1 Changed Figure 2 * Added Figure 5 Figure 4 Changed Figure 7 Figure 7 Changed Figure 9 Figure 9 Changed Figure 10 Figure 10 Changed Figure 11 Figure 11 Changed Figure 13 Figure 13 Changed Figure 14 Figure 14 Changed Figure 18 Figure 18 Changed Figure 19 Figure 19 Changed

* Figure 20 Deleted Figure 20 Figure 6 Moved Figure 22 Figure 22 Changed Figure 24 Figure 24 Changed Figure 25 Figure 25 Changed Figure 26 Figure 26 Changed Figure 27 Figure 27 Changed Figure 28 Figure 28 Changed Figure 33 Figure 33 Changed viii

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

Figure 34 Figure 34 Changed A.5.1 A.5.1 Changed Table A-I Table A-I Changed A.5.3 A.5.3 Changed A.5.3.1a A.5.3.1a Changed A.5.3.1a(1) A.5.3.1a(1) Changed A.5.3.1a(2) A.5.3.1a(2) Changed A.5.3.1a(3) A.5.3.1a(3) Changed A.5.3.1b A.5.3.1b Changed A.5.3.1c A.5.3.1c Changed Table A-II Table A-II Changed Table A-III Table A-III Changed Table A-IV Table A-IV Changed Table A-V Table A-V Changed Table A-VI Table A-VI Changed Table A-VII Table A-VII Changed Table A-VIII Table A-VIII Changed Table A-IX Table A-IX Changed Table A-X Table A-X Changed Table A-XI Table A-XI Changed Table A-XII Table A-XII Changed Table A-XIII Table A-XIII Changed Table A-XIV Table A-XIV Changed Table A-XV Table A-XV Changed Table A-XVI Table A-XVI Changed Table A-XVII Table A-XVII Changed Table A-XVIII Table A-XVIII Changed Table A-XIX Table A-XIX Changed Table A-XX * Added Table A-XXI * Added B.1.1 B.1.1 Changed B.4.2 B.4.2 Changed B.4.3 B.4.3 Changed B.4.4 B.4.4 Changed B.4.11 B.4.11 Changed B.5.2.3d B.5.2.3d Changed B.5.2.5 (boilerplate) B.5.2.5 (boilerplate) Changed B.5.2.7 * Added B.5.2.7.1 * Added B.5.2.7.2 B.5.2.7 Lead in changed and new para number B.5.2.7.3 * Added B.5.2.7.4 * Added ix

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

B.5.2.10 B.5.2.10 Changed B.5.2.11 * Added B.5.2.15 B.5.2.14 Changed B.5.2.16 B.5.2.15 Changed B.5.2.25 B.5.2.24 Changed B.5.3.4 B.5.3.4 Changed B.5.3.5 B.5.3.5 Changed B.5.4 B.5.4 Changed B.5.4.3d B.5.4.3d Changed B.5.5 B.5.5 Changed B.5.5 (Special Instructions para)

B.5.5 (Special Instructions para)

Changed

B.5.6 B.5.6 Changed B.5.6.3.2 (MOC para) B.5.6.3.2 (MOC para) Changed C.1.1 C.1.1 Changed C.4.3 C.4.3 Changed C.4.4 C.4.4 Changed C.4.11 C.4.11 Changed C.5.2.2.2.3.1- C.5.2.2.2.3.10

C.5.2.2.4-C.5.2.2.13 Corrected paragraph numbering (no bars)

C.5.2.2.2.3.10 C.5.2.2.13 Changed C.5.2.2.3.3.1- C.5.2.2.3.3.7

C.5.2.2.3.4-C.5.2.2.3.10 Corrected paragraph numbering (no bars)

C.5.2.2.3.3.4 C.5.2.2.3.7 Changed C.5.2.2.3.3.7 C.5.2.2.3.10 Changed C.5.2.2.4.5 * Added Figure C-1 Figure C-1 Changed D.1.1 D.1.1 Changed D.4.2 D.4.2 Changed D.4.3 D.4.3 Changed D.4.4 D.4.4 Changed D.4.5 D.4.5 Changed D.4.12 D.4.12 Changed D.5.1 D.5.1 Changed D.5.2 D.5.2 Changed D.5.2.1 D.5.2.1 Changed D.5.5 D.5.5 Changed D.5.5.5.3 D.5.5.5.3 Changed D.5.5.5.3a D.5.5.5.3a Changed D.5.5.5.3b D.5.5.5.3b Changed D.5.5.8.3.6.1 D.5.5.8.3.6.1 Changed D.5.5.8.3.8 D.5.5.8.3.8 Changed D.5.5.8.4 D.5.5.8.4 Changed x

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

D.5.5.8.4a&b D.5.5.8.4a&b Changed D.5.5.8.4.6.1a D.5.5.8.4.6.1a Changed D.5.5.8.4.6.1b D.5.5.8.4.6.1b Changed D.5.5.8.4.7 D.5.5.8.4.7 Changed D.5.5.8.4.8 D.5.5.8.4.8 Changed D.5.5.8.5.8 D.5.5.8.5.8 Changed Figure D-3 Figure D-3 Changed Figure D-4 Figure D-4 Changed Figure D-5 Figure D-5 Changed Figure D-6 Figure D-6 Changed Figure D-8 Figure D-8 Changed E.1.1 E.1.1 Changed E.4.1 E.4.1 Changed E.4.2 E.4.2 Changed E.4.3 E.4.3 Changed E.4.4 E.4.4 Changed E.4.5 E.4.5 Changed E.4.6 E.4.6 Changed E.4.13 E.4.13 Changed E.5.1 E.5.1 Changed E.5.2.1 E.5.2.1 Changed E.5.2.2 E.5.2.2 Changed E.5.2.3 E.5.2.3 Changed E.5.2.7 E.5.2.7 Changed E.5.2.7a * Added E.5.2.7b E.5.2.7b Changed E.5.2.8 E.5.2.8 Changed E.5.2.9 E.5.2.9 Changed E.5.2.10 E.5.2.10 Changed E.5.2.13 * Added E.5.2.14 * Added E.5.3 E.5.3 Changed E.5.3.1 E.5.3.1 Changed E.5.3.2 E.5.3.2 Changed E.5.3.2.3 E.5.3.2.3 Changed E.5.3.2.3.9 E.5.3.2.3.9 Changed E.5.3.4.1 E.5.3.4.1 Changed E.5.3.4.1.3a E.5.3.4.1.3a Changed E.5.3.4.1.3b E.5.3.4.1.3b Changed E.5.3.4.1.3c E.5.3.4.1.3c Changed E.5.3.4.1.3d E.5.3.4.1.3d Changed E.5.3.4.2.3 E.5.3.4.2.3 Changed xi

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

E.5.3.4.2.3.1.2 E.5.3.4.2.3.1.2 3rd sentence deleted and biennially added to list of intervals

E.5.3.4.2.3.1.5 E.5.3.4.2.3.1.5 Changed E.5.3.4.2.3.1.6 E.5.3.4.2.3.1.6 Changed E.5.3.4.2.4 E.5.3.4.2.4 Changed E.5.3.5 E.5.3.5 Changed

* E.5.3.5a Deleted (Moved to lead in) E.5.3.5g E.5.3.5h Changed E.5.3.5.3 E.5.3.5.3 Changed main para, deleted one task and added several new maintenance tasks to list

E.5.3.5.3.1e * Added E.5.3.5.3.1h E.5.3.5.3.1g Changed E.5.3.5.3.2.2 E.5.3.5.3.2.2 Changed

* E.5.3.5.3.2.2b Deleted

* E.5.3.5.3.2.2e&f Deleted E.5.3.5.3.2.2.1 * Added E.5.3.5.3.2.2.2 * Added E.5.3.5.3.3a E.5.3.5.3.3a Changed E.5.3.5.3.7 E.5.3.5.3.7 Changed E.5.3.5.3.8 E.5.3.5.3.8 Changed E.5.3.5.3.8c * Added E.5.3.5.3.9 E.5.3.5.3.9 Changed E.5.3.5.3.9e E.5.3.5.3.9e Changed E.5.3.5.3.9f * Added E.5.3.5.3.10 E.5.3.5.3.10 Changed E.5.3.5.3.11 E.5.3.5.3.11 Changed E.5.3.5.3.16a&b E.5.3.5.3.16a&b Changed E.5.3.5.3.17b E.5.3.5.3.17b Changed E.5.3.5.3.17b(3)&(4) * Added E.5.3.5.3.18a E.5.3.5.3.18 Changed E.5.3.5.3.18b&c * Added E.5.3.5.3.21f * Added E.5.3.5.3.22b * Added E.5.3.5.3.28 E.5.3.5.3.28 Changed E.5.3.5.3.35 E.5.3.5.3.35 Changed E.5.3.5.3.36 * Added E.5.3.5.3.37 * Added E.5.3.5.3.38 E.5.3.5.3.36 Changed

* E.5.3.5.3.39 Deleted E.5.3.5.3.41 * Added xii

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

E.5.3.5.3.42 * Added E.5.3.5.3.43 * Added E.5.3.5.3.44 * Added E.5.3.5.3.45 * Added E.5.3.8.4c E.5.3.8.4c Changed E.5.3.9.1 E.5.3.9.1 Changed E.5.3.9.1.1 * Added E.5.3.9.1.2 * Added E.5.3.9.1.3 E.5.3.9.1 (part of it) Changed main body and paragraph number E.5.3.11 E.5.3.11 Changed E.5.3.12.3.1 * Added E.5.3.12.4 E.5.3.12.5 Changed E.5.3.12.5 * Added E.5.3.12.6 E.5.3.12.5 Changed E.5.3.12.6.1 * Added E.5.3.12.6.2 * Added E.5.3.12.7 E.5.3.12.6 Changed E.5.3.16.4 * Added Figure E-2 Figure E-2 Changed

* Figure E-3 Deleted Figure E-4 Figure E-5 Changed Figure E-7 Figure E-8 Changed Figure E-10 Figure E-11 Changed F.1.1 F.1.1 Changed F.4.2 F.4.2 Changed F.4.3 F.4.3 Changed F.4.4 F.4.4 Changed F.4.8 F.4.8 Changed F.5.2 F.5.2 Changed F.5.3 F.5.3 Changed F.5.3.3 F.5.3.3 Changed F.5.3.3.1 F.5.3.3.1 Changed F.5.3.3.2 F.5.3.3.2 Changed F.5.3.5.3 F.5.3.5.3 Changed F.5.3.5.3.1 (boilerplate) F.5.3.5.3.1 (boilerplate) Changed F.5.3.5.3.2 (boilerplate) F.5.3.5.3.2 (boilerplate) Changed F.5.3.5.3.3 * Added F.5.3.6.3.2 F.5.3.6.3.2 Changed F.5.3.6.3.2.3.2.4 F.5.3.6.3.2.3.2.4 Changed F.5.3.6.3.2.6 F.5.3.6.3.2.6 Changed F.5.3.6.3.2.6.4 F.5.3.6.3.2.6.4 Changed F.5.3.6.3.2.9 F.5.3.6.3.2.9 Changed xiii

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

F.5.3.8 F.5.3.8 Changed F.5.3.8.3 F.5.3.8.3 Changed F.5.3.10 F.5.3.10 Changed F.5.3.10.3 F.5.3.10.3 Changed F.5.3.11.1 F.5.3.11.1 Changed F.5.3.11.1.3 F.5.3.11.1.3 Changed F.5.3.11.2 F.5.3.11.2 Changed F.5.3.11.2.3 F.5.3.11.2.3 Changed F.5.3.11.3.3 F.5.3.11.3.3 Changed Figure F-2 Figure F-2 Changed Figure F-9 Figure F-9 Changed Figure F-11 Figure F-11 Changed Figure F-12 Figure F-12 Changed Figure F-13 Figure F-13 Changed G.1.1 G.1.1 Changed G.4.2 G.4.2 Changed G.4.3 G.4.3 Changed G.4.4 G.4.4 Changed G.4.11 G.4.11 Changed G.5.2.4 G.5.2.4 Changed G.5.3 G.5.3 Changed G.5.3.1 G.5.3.1 Chnaged G.5.3.1.1 G.5.3.1.1 Changed G.5.3.1.2 G.5.3.1.2 Changed G.5.3.1.3 & boilerplate G.5.3.1.3 & boilerplate Changed G.5.3.2 G.5.3.2 Changed G.5.3.2.1 G.5.3.2.1 Changed G.5.3.2.2 G.5.3.2.2 Changed G.5.3.2.3 & boilerplate G.5.3.2.3 & boilerplate Changed G.5.3.3 G.5.3.3 Changed G.5.3.3.1 G.5.3.3.1 Changed G.5.3.3.2 G.5.3.3.2 Changed G.5.3.3.3 G.5.3.3.3 Changed G.5.3.3.3b G.5.3.3.3b Changed

* G.5.3.3.3e Deleted G.5.3.3.4 G.5.3.3.4 Changed G.5.3.3.4d G.5.3.3.4d Changed G.5.3.4 G.5.3.4 Changed G.5.3.5 G.5.3.5 Changed G.5.4 G.5.4 Changed G.5.4.3.1 (boilerplate) G.5.4.3.1 (boilerplate) Changed G.5.4.3.2 (boilerplate) G.5.4.3.2 (boilerplate) Changed G.5.4.4.1 G.5.4.4.1 Changed xiv

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

G.5.4.5 G.5.4.5 Changed G.5.5 G.5.5 Changed G.5.5.3.1 (boilerplate) G.5.5.3.1 (boilerplate) Changed G.5.5.3.2 (boilerplate) G.5.5.3.2 (boilerplate) Changed G.5.5.4 G.5.5.4 Changed G.5.6 G.5.6 Added G.5.6.1 * Added G.5.6.2 * Added G.5.6.3 * Added G.5.6.4 * Added G.5.7.3 (boilerplate) G.5.6.3 (boilerplate) Changed G.5.8 G.5.7 Changed G.5.8.3 (boilerplate) G.5.7.3 (boilerplate) Changed G.5.9 G.5.8 Changed G.5.9.3 G.5.9.3 Changed (Added MRPL intro boilerplate) G.5.10 G.5.9 Changed G.5.10.3 G.5.9.3 Changed G.5.12.2 G.5.11.2 Changed Figure G-1 Figure G-1 Changed Figure G-2 Figure G-2 Changed Figure G-3 Figure G-3 Changed Figure G-4 Figure G-4 Changed Figure G-5 Figure G-5 Changed Figure G-6 Figure G-6 Changed Figure G-9 Figure G-9 Changed Figure G-10 Figure G-10 Changed Figure G-11 * Added Figure G-15 Figure G-14 Changed Figure G-16 Figure G-15 Changed Figure G-17 Figure G-16 Changed Figure G-18 Figure G-17 Changed Figure G-19 * Added Figure G-20 Figure G-18 Changed H.1.1 H.1.1 Changed H.4.3 H.4.2.3 Changed H.4.4 H.4.3 Changed H.4.7 H.4.6 Changed H.5.3.6 H.5.3.6 Changed I.4.2 I.4.2 Changed I.4.3 I.4.3 Changed I.4.4 I.4.4 Changed I.4.11 I.4.11 Changed xv

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

Figure I-1 Figure I-1 Changed Figure I-4 Figure I-4 Changed J.1.1 J.1.1 Changed J.4.3 J.4.3 Changed J.4.4 J.4.4 Changed J.4.7 J.4.7 Changed J.4.10 J.4.10 Changed J.5.1 J.5.1 Changed J.5.2 * Added J.5.2.1 * Added J.5.2.1.1 J.5.2 Changed J.5.2.2 * Added

* J.5.3 Deleted

* J.5.4 Deleted

* J.5.5 Deleted J.5.3 * Added J.5.4 * Added J.5.5 * Added Figure J-1 Figure J-1 Changed K.1.1 K.1.1 Changed K.4.3 K.4.3 Changed K.4.4 K.4.4 Changed K.4.12 K.4.12 Changed K.5.1.1 * Added K.5.1.1.1 K.5.1.1 Changed K.5.1.1.2 K.5.1.2 Changed

* K.5.1.3 Deleted K.5.1.1.3 K.5.5.1 Moved & para number changed Table K-I Table K-II Moved & para number changed K.5.1.1.4 K.5.6 Moved and para number changed K.5.2 * Added K.5.2.1 K.5.2 Changed K.5.2.1.1 K.5.2.1 Changed K.5.2.1.4 K.5.2.4 Changed K.5.2.1.5 K.5.2.5 Changed K.5.2.1.6 * Added K.5.2.1.7 K.5.2.6 Changed K.5.2.1.9 * Added K.5.2.1.10 * Added K.5.3 * Added xvi

Current Para/Fig/Table Number

Previous Para/Fig/Table Number

Action

K.5.3.1 * Added K.5.3.2 * Added K.5.3.3 K.5.3 Changed K.5.3.3.1.1 K.5.3.3.1.1 Text deleted (last 2 sentences) K.5.4 K.5.4 Changed

* K.5.4.3 Deleted

* Table K-I Deleted

* K.5.4.5 Deleted

* K.5.4.6 Deleted K.5.4.5 K.5.4.8 Changed K.5.5 * Added K.5.5.1 * Added K.5.5.1.1 * Added K.5.5.1.2 * Added K.5.5.1.3 K.5.5 Changed K.5.5.2 * Added K.5.5.2.1 * Added K.5.5.2.2 * Added K.5.5.2.3 K.5.7 Changed K.5.5.2.3.1 K.5.7.1 Changed K.5.5.3 * Added K.5.5.3.1 * Added K.5.5.3.2 * Added K.5.5.3.3 K.5.8 Changed K.5.6.3 K.5.9.3 Changed Figure K-1 Figure K-1 Changed L.1.1 L.1.1 Changed L.4.3 L.4.3 Changed L.4.4 L.4.4 Changed L.4.9 L.4.9 Changed L.5.3 * Added L.5.3.2.4 L.5.4.4 Changed L.5.4 * Added l.5.5 * Added L.5.6 L.5.7 Changed L.5.6.3 L.5.7.3 Changed Figure L-1 Figure L-1 Changed Figure L-2 Figure L-2 Changed Figure L-3 Figure L-3 Changed Appendix M * Added Appendix N * Added

TABLE OF CONTENTS

PARAGRAPH PAGE

xvii

FOREWORD................................................................................................................................. ii

1. SCOPE

1.1 Scope

1.2 Paragraphs with limited applicability

1.3 Use of the technical content

1.4 Examples/figures

2. APPLICABLE DOCUMENTS

2.1 General

2.2 Government documents

2.2.1 Specifications, standards, and handbooks

2.2.2 Other Government documents and publications

2.3 Non-Government publications

2.4 Order of precedence

3. DEFINITIONS

4. GENERAL REQUIREMENTS

4.1 General

4.2 Types of technical publications

4.3 Selective application and tailoring of content using Appendix A Matrixes

4.4 Preparation of digital data for electronic delivery

4.5 Use of the Army Document Type Definition (DTD)/style sheets

4.6 Obtaining the Army Document Type Definition (DTD)/style sheets

4.7 Style and format

4.7.1 Examples of style and format

4.7.2 TM divisions

4.7.2.1 Volume size and content

4.7.2.2 Chapters

4.7.2.3 Work packages

4.7.2.3.1 Work package size

4.7.3 Font size and style

4.7.4 Page size and orientation

4.7.5 Foldout pages

4.7.6 Final Reproducible Copy (FRC)

4.7.7 Warnings, cautions, and notes

4.7.7.1 Warning <warning>

4.7.7.2 Caution <caution>

4.7.7.3 Notes <note>

4.7.7.4 Display of warnings, cautions, and notes

4.7.7.5 Icons <icon-set>

4.7.7.5.1 Development of icons

xviii

4.7.7.5.2 Safety warnings with icons <icon-set>

4.7.7.5.3 Hazardous materials warnings <warning>

4.7.7.5.3.1 Format for hazardous materials warnings with icons <icon-set>

4.7.7.5.3.2 Abbreviated format for hazardous materials warnings with icons <icon-set>

4.7.7.5.4 Equipment damage caution icons <icon-set>

4.7.8 Chapters

4.7.8.1 Chapter title page <titlepg>

4.7.8.2 Chapter numbering

4.7.9 Work packages

4.7.9.1 Work package number

4.7.9.2 Work package sequential numbering

4.7.9.2.1 Assignment of new work packages sequence numbers for a change

4.7.9.2.2 Deletion of work packages in a change

4.7.9.2.3 Assignment of work package sequence numbers in volumized TMs

4.7.9.3 Work package identification information <wpidinfo>

4.7.9.3.1 Maintenance class <maintlvl>

4.7.9.3.2 Work package title <title>

4.7.9.3.3 Effectivity notice <config>

4.7.9.3.4 Joint use

4.7.9.4 Initial setup information <initial_setup>

4.7.9.4.1 Test equipment <testeqp>

4.7.9.4.2 Tools <tools>

4.7.9.4.3 Special tools <spectools>

4.7.9.4.4 Materials <mtrlpart>

4.7.9.4.5 Mandatory replacement parts <mrp>

4.7.9.4.6 Personnel required <persnreq>

4.7.9.4.7 References <ref>

4.7.9.4.8 Equipment conditions <eqpconds>

4.7.9.4.9 Special environmental conditions <specenv>

4.7.9.4.10 Drawings/diagrams/schematics required <dwgreq>

4.7.9.4.11 Estimated time to complete the task <time.to.comp>

4.7.9.5 End of task/work package statement

4.7.9.6 Work package page numbering

4.7.10 Paragraphs

4.7.10.1 Paragraph numbering

4.7.10.2 Paragraphs and subparagraph titles

4.7.10.2.1 Format

4.7.10.2.2 Continuation headers

4.7.11 Task titles

4.7.12 Procedural steps

xix

4.7.12.1 Procedural step levels

4.7.12.2 Procedural step titles

4.7.13 Tables and lists

4.7.13.1 Placement of tables

4.7.13.2 Table numbering

4.7.13.3 Table titles

4.7.13.4 Footnotes <ftnote> to tables

4.7.13.5 Table format

4.7.13.6 Lists

4.7.13.6.1 Definition list <deflist>

4.7.13.6.2 Random list <randlist>

4.7.13.6.3 Sequential list <seqlist>

4.7.13.7 Standard information

4.7.14 Placement of text

4.7.15 Placement of illustrations

4.7.15.1 Rotating illustrations

4.7.15.2 Placement of text and related illustrations for pocket-sized TMs

4.7.15.3 Repeating illustrations

4.7.16 Margin data

4.7.16.1 Headers

4.7.16.2 Footers

4.7.16.2.1 Page numbering

4.7.16.2.1.1 Front matter

4.7.16.2.1.2 Rear matter

4.7.16.2.1.3 Blank pages

4.7.16.2.1.4 Foldout page numbers

4.7.17 Abbreviations and acronyms

4.7.18 Symbols

4.7.18.1 General information for symbols

4.7.18.2 Metric symbols

4.7.19 Nuclear hardness (hardness-critical processes) marking

4.7.20 Electrostatic Discharge (ESD) sensitive marking

4.7.21 Quality Assurance (QA)

4.7.22 Special page markings

4.7.22.1 Security classification

4.7.22.1.1 Classification guidelines

4.7.22.2 Emergency page markings

4.7.22.3 Protective markings

4.7.23 Referencing

4.7.23.1 Other documents <extref>

4.7.23.2 Within the TM <xref>

4.7.23.2.1.1 TM divisions

4.7.23.2.1.2 Volumes

PARAGRAPH PAGE

xx

4.7.23.2.1.3 Maintenance tasks, procedures, and paragraphs

4.7.23.3 Equipment, components, and parts

4.7.23.4 National Stock Numbers (NSNs) and Part Numbers (P/Ns)

4.7.23.5 Equipment panel markings (placarding)

4.7.23.6 Metric and United States (U.S.) standard measurements

4.7.23.7 Temperature

4.7.23.8 Tables

4.7.23.9 Figures and multisheet figures

4.7.23.10 Index numbers

4.7.23.11 Nomenclature callouts

4.7.23.12 Items on diagrams

4.7.23.13 Footnotes

4.7.23.14 Repeating information

4.7.24 Equations

4.7.25 Nomenclature

4.7.25.1 Nomenclature consistency and applicability

4.7.25.2 Official/approved nomenclature

4.7.25.3 Military terms

4.7.25.4 Automatic electronic test and checkout terminology

4.7.26 Comprehensibility

4.7.27 Graphics

4.7.27.1 Graphic format

4.7.27.2 Types of graphics

4.7.27.2.1 Line drawings

4.7.27.2.2 Multiview and multisheet illustrations

4.7.27.2.3 Photographs

4.7.27.2.3.1 Photograph quality

4.7.27.2.3.2 Retouching

4.7.27.2.3.3 Use of photographs in place of line drawings

4.7.27.2.4 Engineering drawings (NMWRS/DMWRS only)

4.7.27.2.5 Diagrams

4.7.27.2.5.1 Diagram specifications

4.7.27.2.5.2 Types of diagrams

4.7.27.2.6 Charts and graphs

4.7.27.2.7 Tools and test equipment illustrations

4.7.27.3 Elements of illustrations

4.7.27.3.1 Border rules and boxes

4.7.27.3.2 Use of the human figure

4.7.27.3.3 Credit lines

4.7.27.3.4 Callouts

4.7.27.3.4.1 Index numbers

4.7.27.3.4.2 Leader lines and arrowheads

4.7.27.3.5 Illustration legends

xxi

4.7.27.3.6 Procedures on illustrations

4.7.27.4 Graphic techniques

4.7.27.4.1 Figure numbers

4.7.27.4.2 Repair Parts and Special Tools List (RPSTL) figure numbering

4.7.27.4.3 Foldout figure numbering

4.7.27.4.4 Multisheet numbering

4.7.27.4.5 Figure titles

4.7.27.4.5.1 Figure title format

4.7.27.4.5.2 Figure title placement

4.7.27.4.6 Illustration identification numbers

4.7.27.4.7 Portraying signal flow

4.7.27.4.8 Use of color

4.8 Changes/Revisions

4.8.1 Changes for TMs

4.8.1.1 Changes

4.8.1.2 Changed work packages

4.8.1.3 Changed front and rear matter pages

4.8.1.4 Change symbols for text and tables

4.8.1.5 Change symbols for illustrations

4.8.1.6 Changes to Repair Parts and Special Tools List (RPSTL) work packages

4.8.2 Complete TM revisions

5. DETAILED REQUIREMENTS

5.1 Technical content preparation

5.2 Preparation of front and rear matter

5.2.1 Front matter <paper.frnt>

5.2.1.1 Front cover <frntcover>

5.2.1.1.1 TM number for joint service TMs <tminfono>

5.2.1.1.2 (MC) Publication control number (PCN)

5.2.1.1.3 National overhaul standards statement (TMs/DMWRs/NMWRs with national overhaul standards only)

5.2.1.1.4 Publication title <prtitle>

5.2.1.1.4.1 Model number <modelno>

5.2.1.1.4.2 National stock number <nsn> (Required)

5.2.1.1.4.3 Part number <partno>

5.2.1.1.4.4 End item code <eic>

5.2.1.1.5 Weapon system name <weapons_system>

5.2.1.1.6 Equipment illustration <graphic>

5.2.1.1.7 Availability statement (DMWR/NMWR only) <avail>

5.2.1.1.8 Supersedure notice for revisions only <super>

5.2.1.1.9 Distribution statement <dist>

xxii

5.2.1.1.10 Export control notice warning <export>

5.2.1.1.11 Destruction notice <destr>

5.2.1.1.12 General purpose notice <general_purpose_notices>

5.2.1.1.12.1 Hazardous materials information notice

5.2.1.1.13 Service nomenclature <servnomen>

5.2.1.1.14 Publication date <date>

5.2.1.1.15 For Army Communications Security (COMSEC) manuals use

5.2.1.2 Abbreviated front cover <frntcover_abbreviated>

5.2.1.3 (MC) Promulgation letter <promulgation>

5.2.1.4 Warning summary <warnsum>

5.2.1.4.1 First aid <first_aid>

5.2.1.5 Change transmittal page <chgsheet>

5.2.1.6 List of effective pages/work packages <loepwp>

5.2.1.6.1 Types of publications

5.2.1.6.2 Exempted publications

5.2.1.6.3 Types of pages to be included

5.2.1.6.4 Exempted pages

5.2.1.6.5 Supersedure note (Revisions only)

5.2.1.6.6 Date of issue for original and changes

5.2.1.6.7 Total number of pages statement

5.2.1.6.8 Change numbers

5.2.1.6.9 Listing the pages

5.2.1.6.10 Numbering the list of effective pages/work packages

5.2.1.6.11 List of effective pages/work packages for Repair Parts and Special Tools

List (RPSTLs)

5.2.1.6.12 Multi-service manuals

5.2.1.7 (A) Title page <titleblk>

5.2.1.7.1 Reporting errors and recommending improvements statement

<reporting>

5.2.1.8 Preventive maintenance services and phased maintenance inspection manuals title page with warning data (Aviation only)

5.2.1.9 Table of contents <contents>

5.2.1.10 "How To Use This Manual" information (Except RPSTLs and

DMWRs/NMWRs) <howtouse>

5.2.1.10.1 International standardization agreements

5.2.2 Rear matter <rear>

5.2.2.1 Glossary (Except RPSTL) <glossary>

5.2.2.2 Alphabetical index (Except RPSTL) <aindx>

5.2.2.3 Reporting errors and recommending improvements Department of the

Army (DA) Form 2028 <da2028>

5.2.2.4 Authentication page <authent>

5.2.2.5 Foldout pages (Except RPSTL) <foldsect>

xxiii

5.2.2.6 Back cover <back>

5.2.3 Multi-volume manuals

5.2.4 Combined manuals (multiple maintenance levels)

5.2.4.1 Front matter

5.2.4.2 General information

5.2.4.3 Operating, troubleshooting, and maintenance procedures

5.2.4.4 Supporting information

6. NOTES

6.1 Intended use

6.2 Acquisition requirements

6.3 Tailoring guidance

6.4 Subject term (key word) listing

6.5 Changes from previous issue

A CONTENT SELECTION MATRIXES

A.1 SCOPE

A.1.1 Scope

A.2 APPLICABLE DOCUMENTS

A.3 DEFINITIONS

A.4 GENERAL REQUIREMENTS

A.5 DETAILED REQUIREMENTS

A.5.1 Tailoring requirements for technical manuals A.5.2 Publication Titles A.5.3 Technical content tables A.5.3.1 Intended use A.5.4 Acquisition requirements

B GENERAL INFORMATION, EQUIPMENT DESCRIPTION, AND THEORY

OF OPERATION

B.1 SCOPE

B.1.1 Scope

B.2 APPLICABLE DOCUMENTS

B.3 DEFINITIONS

B.4 GENERAL REQUIREMENTS

B.4.1 General xxiv

B.4.2 Maintenance level/class applicability B.4.3 Preparation of digital data for electronic delivery B.4.4 Use of the Document Type Definition (DTD)/style sheet B.4.5 Content structure B.4.6 Style and format B.4.7 Work package development B.4.8 Safety devices and interlocks B.4.9 Electrostatic Discharge (ESD) sensitive parts B.4.10 Nuclear hardness <hcp> B.4.11 Selective application and tailoring of contents using Appendix A matrixes .222

B.5 DETAILED REQUIREMENTS

B.5.1 Preparation of general information, equipment description, and theory of operation B.5.1.1 Required general information, equipment description, and theory of operation data work packages B.5.2 General information work package <ginfowp> B.5.2.1 Work package identification information <wpidinfo> B.5.2.2 Work package initial setup <initial_setup> B.5.2.3 Scope <scope> B.5.2.4 Maintenance forms, records, and reports <mfrr> B.5.2.5 Reporting equipment improvement recommendations <eir> B.5.2.6 Hand Receipt (HR) manuals <handreceipt> B.5.2.7 Corrosion prevention and control <cpcdata> B.5.2.7.1 CPC structure B.5.2.7.2 CPC boiler plate statement B.5.2.7.3 SF Form 368 boiler plate statement B.5.2.7.4 References to relevant tasks, work packages, and DA publications B.5.2.8 Ozone Depleting Substances (ODSs) <odsdata> B.5.2.9 Destruction of Army materiel to prevent enemy use <destructmat> B.5.2.10 Preparation for storage or shipment <pssref> B.5.2.11 Transportability guidance B.5.2.12 Warranty information <wrntyref> B.5.2.13 Nomenclature cross-reference list <nomenreflist> B.5.2.14 List of abbreviations/acronyms <loa> B.5.2.15 Quality assurance (QA) (DMWR/NMWR and aviation only)

<qainfo> B.5.2.16 Quality of material <qual.mat.info> B.5.2.17 Safety, care, and handling <sftyinfo> B.5.2.18 Nuclear hardness <hcp> B.5.2.19 Calibration <calref> B.5.2.20 Item unique identification (IUID) <iuid> xxv

B.5.2.21 Engineering Change Proposals (ECPs) (DMWR/NMWR only) <ecp> B.5.2.22 Modification list (DMWR/NMWR only) <modification> B.5.2.23 Deviations and exceptions (DMWR/NMWR only) <deviation> B.5.2.24 Mobilization requirements (DMWR/NMWR only) <mobreq> B.5.2.25 Critical safety items (CSI) <csireq> B.5.2.26 Cost considerations (DMWR/NMWR only) <cost> B.5.2.27 Supporting information for repair parts, special tools, Test, Measurement, and Diagnostic Equipment (TMDE), and support equipment <supdata>

B.5.2.27.1 Common tools and equipment B.5.2.27.2 Special tools, Test, Measurement, and Diagnostic Equipment (TMDE), and support equipment B.5.2.27.3 Repair parts B.5.2.28 Copyright credit line <copyrt> B.5.2.28.1 Proprietary names B.5.2.28.2 Advertising B.5.3 Equipment description and data work package <descwp> B.5.3.1 Work package identification information <wpidinfo> B.5.3.2 Work package initial setup <initial_setup> B.5.3.3 Equipment characteristics, capabilities, and features <eqpinfo> B.5.3.4 Location and description of major components <locdesc> B.5.3.5 Equipment differences <eqpdiff> B.5.3.6 Equipment data <eqpdata> B.5.4 Theory of operation work package <thrywp> B.5.4.1 Work package identification information <wpidinfo> B.5.4.2 Work package initial setup <initial_setup> B.5.4.3 Theory presentation B.5.5 General information work package (Preventive Maintenance Services

Manual or Preventive Maintenance Daily Manual only) <pms-ginfowp>

B.5.5.1 Work package identification information <wpidinfo> B.5.5.2 Work package initial setup <initial_setup> B.5.5.3 Maintenance activities <scope> B.5.5.4 General information <pms-geninfo> B.5.6 General information work package (Phased Maintenance Inspection manual only) <pm-ginfowp> B.5.6.1 Work package identification information <wpidinfo> B.5.6.2 Work package initial setup <initial_setup> B.5.6.3 General information <geninfo> B.5.6.3.1 Phased schedule B.5.6.3.2 Additional general information xxvi

B.6 NOTES

C OPERATOR INSTRUCTIONS (EXCEPT AVIATION)

C.1 SCOPE

C.1.1 Scope

C.2 APPLICABLE DOCUMENTS

C.3 DEFINITIONS

C.4 GENERAL REQUIREMENTS

C.4.1 General C.4.2 Maintenance level/class applicability C.4.3 Preparation of digital data for electronic delivery C.4.4 Use of the Document Type Definition (DTD)/style sheet C.4.5 Content structure C.4.6 Style and format C.4.7 Work package development C.4.8 Safety devices and interlocks C.4.9 Electrostatic Discharge (ESD) sensitive part C.4.10 Nuclear hardness <hcp> C.4.11 Selective application and tailoring of contents using Appendix A matrixes

C.5 DETAILED REQUIREMENTS

C.5.1 Preparation of operator instructions C.5.2 Operator instructions work packages C.5.2.1 Work package content C.5.2.2 Types of operator instructions work packages C.5.2.2.1 Description and use of controls and indicators work package

<ctrlindwp> C.5.2.2.1.1 Work package identification information <wpidinfo> C.5.2.2.1.2 Work package initial setup <initial_setup> C.5.2.2.1.3 Controls and indicators description tabular option C.5.2.2.1.4 Controls and indicators description narrative option C.5.2.2.2 Operation under usual conditions work package <opusualwp> C.5.2.2.2.1 Work package identification information <wpidinfo> C.5.2.2.2.2 Work package initial setup <initial_setup> C.5.2.2.2.3 Operations under usual tasks <opertsk> C.5.2.2.2.3.1 Security measures for electronic data <secref> C.5.2.2.2.3.2 Siting requirements <site> xxvii

C.5.2.2.2.3.3 Shelter requirements <shelter> C.5.2.2.2.3.4 Assembly and preparation for use <prepforuse> C.5.2.2.2.3.5 Initial adjustments before use and self-test <initial> C.5.2.2.2.3.6 Operating procedures <oper> C.5.2.2.2.3.7 Operating procedure considerations C.5.2.2.2.3.8 Operating auxiliary equipment <operaux> C.5.2.2.2.3.9 Preparation for movement <prepmove> C.5.2.2.2.3.10 Decals and instruction plates <instructplt> C.5.2.2.3 Operation under unusual conditions work package <opunuwp> C.5.2.2.3.1 Work package identification information <wpidinfo> C.5.2.2.3.2 Work package initial setup <initial_setup> C.5.2.2.3.3 Operations under unusual tasks <opunutsk> C.5.2.2.3.3.1 Security measures for electronic data <secref> C.5.2.2.3.3.2 Unusual environment/weather <unusualenv> C.5.2.2.3.3.3 Fording and swimming <fording> C.5.2.2.3.3.4 Interim Chemical, Biological, Radiological, Nuclear, and Explosives

(CBRNE) decontamination procedures <decon> C.5.2.2.3.3.5 Jamming and Electronic Countermeasures (ECM) procedures <ecm> C.5.2.2.3.3.6 Degraded operation procedures <degraded> C.5.2.2.3.3.7 Decals and instruction plates <instructplt> C.5.2.2.4 Emergency work package <emergencywp> C.5.2.2.4.1 Work package identification information <wpidinfo> C.5.2.2.4.2 Work package initial setup <initial_setup> C.5.2.2.4.3 Emergency operation <emergency> C.5.2.2.4.4 Emergency shutdown <emergency> C.5.2.2.4.5 Vehicle recovery C.5.2.2.5 Stowage and decal/data plate guide work package <stowagewp> C.5.2.2.5.1 Work package identification information <wpidinfo> C.5.2.2.5.2 Work package initial setup <initial_setup> C.5.2.2.5.3 Introduction <intro> C.5.2.2.5.4 Stowage guide <stowinfo> C.5.2.2.5.5 Decal/data plate guide <decalinfo> C.5.2.2.6 On-vehicle equipment loading plan work package <eqploadwp> C.5.2.2.6.1 Work package identification information <wpidinfo> C.5.2.2.6.2 Work package initial setup <initial_setup> C.5.2.2.6.3 Introduction <intro> C.5.2.2.6.4 Illustrated loading plan list(s) <loaddesc> xxviii

C.6 NOTES

D TROUBLESHOOTING PROCEDURES

D.1 SCOPE

D.1.1 Scope

D.2 APPLICABLE DOCUMENTS

D.3 DEFINITIONS

D.4 GENERAL REQUIREMENTS

D.4.1 General D.4.2 Development of troubleshooting instructions D.4.3 Maintenance level/class applicability D.4.4 Preparation of digital data for electronic delivery D.4.5 Use of Document Type Definition (DTD)/style sheet D.4.6 Content structure D.4.7 Style and format D.4.8 Work package development D.4.9 Safety devices and interlocks D.4.10 Electrostatic discharge (ESD) sensitive parts D.4.11 Nuclear hardness <hcp> D.4.12 Selective application and tailoring of contents using Appendix A matrixes

D.5 DETAILED REQUIREMENTS

D.5.1 Testing and troubleshooting philosophy D.5.2 Information to be provided D.5.2.1 Methods of testing and troubleshooting D.5.2.1.1 Manual (non-automatic) troubleshooting D.5.2.1.2 Semi-automatic or automatic testing and troubleshooting D.5.2.1.3 Testing and troubleshooting using built-in-test equipment (BITE) D.5.2.1.4 Sensor derived failures D.5.2.1.5 Failure interpretation D.5.2.2 Types of testing and troubleshooting information D.5.2.2.1 Fault reporting/fault isolation information D.5.2.2.2 Integrated system testing and troubleshooting D.5.2.2.2.1 Integrated systems having self-test or built-in test (BIT) capability D.5.2.2.2.2 Integrated systems requiring the use of system peculiar test sets D.5.2.2.2.3 Integrated systems requiring the use of common test equipment D.5.3 Troubleshooting procedures content D.5.4 Types of testing and troubleshooting xxix

D.5.4.1 Aviation testing and troubleshooting category (Aircraft

Troubleshooting TMs only) <troubleaviationcategory> D.5.4.2 Standard testing and troubleshooting category <troublecategory> D.5.4.3 DMWR/NMWR testing and troubleshooting category (depot only)

<troubledmwrnmwrcategory> D.5.4.4 Master index testing and troubleshooting category

<masterindexcategory> D.5.5 Testing and troubleshooting work packages D.5.5.1 Work package content D.5.5.2 Types of testing and troubleshooting work packages D.5.5.3 Introduction work package <tsintrowp> D.5.5.3.1 Work package identification information <wpidinfo> D.5.5.3.2 Work package initial setup <initial_setup> D.5.5.4 Technical description work packages (Aircraft Troubleshooting

Manuals only) <techdescwp> D.5.5.4.1 Work package identification information <wpidinfo> D.5.5.4.2 Work package initial setup <initial_setup> D.5.5.4.3 Equipment description and data <descproc> D.5.5.4.4 Controls and indicators <ctrlindproc> D.5.5.4.5 Theory of operation <thryproc> D.5.5.5 Troubleshooting index work package <tsindxwp> D.5.5.5.1 Work package identification information <wpidinfo> D.5.5.5.2 Work package initial setup <initial_setup> D.5.5.5.3 Malfunction/symptom index

<tsindx.symptom>/<tsindx.messageword> D.5.5.5.4 Master malfunction/symptom index <tsindx.symptom> D.5.5.5.5 System/subsystem index <tsindx.system> D.5.5.6 Preshop analysis work package (DMWR/NMWR only)

<pshopanalwp> D.5.5.6.1 Work package identification information <wpidinfo> D.5.5.6.2 Work package initial setup <initial_setup> D.5.5.6.3 Scope <scope> D.5.5.6.4 Preparation Procedures <proc> D.5.5.6.5 Preshop analysis procedures <pshopanal> D.5.5.6.5.1 Narrative procedures <proc> D.5.5.6.5.2 Checklist <chklist> D.5.5.6.5.2.1 Cover sheet/frame <coverpage> D.5.5.6.5.2.2 Introduction <intro> D.5.5.6.5.2.3 Table of tests and inspections <pshopckk.tab> D.5.5.7 Component checklist work package (DMWR/NMWR only)

<compchklistwp>

PARAGRAPH PAGE

xxx

D.5.5.7.1 Work package identification information <wpidinfo> D.5.5.7.2 Work package initial setup <initial_setup> D.5.5.7.3 Introduction <intro> D.5.5.7.4 Component checklist <compchklist> D.5.5.8 Operational checkout and troubleshooting procedures work packages D.5.5.8.1 Operational checkout and troubleshooting procedures content D.5.5.8.2 Operational checkout and troubleshooting procedure work package development D.5.5.8.3 Operational checkout work package <opcheckwp> D.5.5.8.3.1 Work package identification information <wpidinfo> D.5.5.8.3.2 Work package initial setup <initial_setup> D.5.5.8.3.3 Introduction <intro> D.5.5.8.3.4 General procedures and precautions <proc> D.5.5.8.3.5 Pretest setup procedures <hookup> D.5.5.8.3.6 Operational checkout procedures <opcheckproc> D.5.5.8.3.6.1 Operational checkout test procedure <opcheck> D.5.5.8.3.6.2 Test set message word index <messageindx> D.5.5.8.3.6.3 Fault code reference index <faultreports> D.5.5.8.3.7 Post-operational shutdown procedures <disconnect> D.5.5.8.3.8 Follow-on maintenance <follow-on> D.5.5.8.4 Troubleshooting work package <tswp> D.5.5.8.4.1 Work package identification information <wpidinfo> D.5.5.8.4.2 Work package initial setup <initial_setup> D.5.5.8.4.3 Introduction <intro> D.5.5.8.4.4 General procedures and precautions <proc> D.5.5.8.4.5 Pretest setup procedures <hookup> D.5.5.8.4.6 Troubleshooting procedures <tsproc> D.5.5.8.4.6.1 Method A - Text-Logic <logicproc> D.5.5.8.4.6.2 Method B - Text <faultproc> D.5.5.8.4.6.3 Method C - Multiplex read codes <muxproc> D.5.5.8.4.7 Post-operational shutdown procedures <disconnect> D.5.5.8.4.8 Follow-on maintenance <follow-on> D.5.5.8.5 Combined operational checkout and troubleshooting work package

<opcheck-tswp> D.5.5.8.5.1 Work package identification information <wpidinfo> D.5.5.8.5.2 Work package initial setup <initial_setup> D.5.5.8.5.3 Introduction <intro> D.5.5.8.5.4 General procedures and precautions <proc> D.5.5.8.5.5 Pretest setup procedures <hookup> D.5.5.8.5.6 Operational checkout and troubleshooting procedures

PARAGRAPH PAGE

xxxi

D.5.5.8.5.6.1 Combined operational checkout and troubleshooting procedures <opcheck-tsproc>

D.5.5.8.5.6.2 Separate operational checkout procedures <opcheckproc> D.5.5.8.5.6.3 Separate troubleshooting procedure <tsproc> D.5.5.8.5.7 Post-operational shutdown procedures <disconnect> D.5.5.8.5.8 Follow-on maintenance <follow-on> D.5.5.8.6 Integrated system troubleshooting procedures work packages

D.6 NOTES

E MAINTENANCE INSTRUCTIONS

E.1 SCOPE

E.1.1 Scope

E.2 APPLICABLE DOCUMENTS

E.3 DEFINITIONS

E.4 GENERAL REQUIREMENTS

E.4.1 General E.4.2 Development of maintenance instructions E.4.3 Maintenance level/class applicability E.4.4 Depot Maintenance Work Requirements (DMWRs) and National

Maintenance Work Requirements (NMWRs) E.4.5 Preparation of digital data for electronic delivery E.4.6 Use of the Document Type Definition (DTD)/style sheet E.4.7 Content structure E.4.8 Style and format E.4.9 Work package development E.4.10 Safety devices and interlocks E.4.11 Electrostatic discharge (ESD) sensitive parts E.4.12 Nuclear hardness E.4.13 Selective application and tailoring of content using Appendix A matrixes...287

E.5 DETAILED REQUIREMENTS

E.5.1 Preparation of maintenance instructions E.5.2 Types of maintenance E.5.2.1 Preventive Maintenance Checks and Services (PMCS) (except for aircraft TMs, DMWRs, and NMWRs) <pmcscategory> E.5.2.2 Weapon system/equipment maintenance with required Preventive

Maintenance Checks and Services (PMCS) (except for aircraft TMs, DMWRs, and NMWRs) <maintenancepmcscategory>

PARAGRAPH PAGE

xxxii

E.5.2.3 Weapon system/equipment maintenance without Preventive Maintenance Checks and Services (PMCS) (except for aircraft TMs, DMWRs, and NMWRs) <maintenancecategory>

E.5.2.4 Depot weapon system/equipment maintenance <depotcategory>. ..288 E.5.2.5 Aircraft maintenance (aircraft TMs, DMWRs, and NMWRs only)

<aviationcategory> E.5.2.6 Auxiliary equipment maintenance <auxiliarycategory> E.5.2.7 Ammunition maintenance <ammunitioncategory> E.5.2.8 Test and inspection maintenance (

Ammunition only) <testinspectioncategory> E.5.2.9 Shipment/movement and storage maintenance (Ammunition only) <shipmentmovementstoragecategory>

E.5.2.10 Ammunition marking maintenance ( Ammunition only) <ammomarkingcategory>

E.5.2.11 Preventive maintenance services (Aircraft preventive maintenance services only) <pmscategory>

E.5.2.12 Phased maintenance inspections (aircraft phased maintenance inspection only) <checklistcategory>

E.5.2.13 Software maintenance <softmaintcategory> E.5.2.14 General maintenance <genmaintcategory> E.5.3 Maintenance work packages E.5.3.1 Work package content E.5.3.2 Service upon receipt work package (Maintainer and AMC only)

<surwp> E.5.3.2.1 Work package identification information <wpidinfo> E.5.3.2.2 Work package initial setup <initial_setup> E.5.3.2.3 Service upon receipt tasks <surtsk> E.5.3.2.3.1 Siting <siting> E.5.3.2.3.2 Shelter requirements <shltr> E.5.3.2.3.3 Service upon receipt of materiel <surmat> E.5.3.2.3.3.1 Unpacking <unpack> E.5.3.2.3.3.2 Checking unpacked equipment <chkeqp> E.5.3.2.3.3.2.1 Packaging material <crit.insp.tab> E.5.3.2.3.3.2.2 Equipment components <pecul.insp.tab> E.5.3.2.3.3.3 Processing unpacked equipment <processeqp> E.5.3.2.3.4 Installation instructions <install> E.5.3.2.3.4.1 Installation of the equipment E.5.3.2.3.4.2 Special applications E.5.3.2.3.4.3 Van and shelter installations E.5.3.2.3.4.4 Assembly of equipment <assem> xxxiii

E.5.3.2.3.5 Preliminary servicing of equipment <preserv> E.5.3.2.3.6 Preliminary checks and adjustment of equipment <prechkadj> E.5.3.2.3.7 Preliminary calibration of equipment <precal> E.5.3.2.3.8 Circuit alignment <calign> E.5.3.2.3.8.1 External connections <extconn> E.5.3.2.3.8.2 Switch settings, patch panel connections, and internal control settings E.5.3.2.3.8.3 Alignment procedures <alignproc> E.5.3.2.3.9 Ammunition service upon receipt tasks E.5.3.2.3.9.1 Ammunition markings <mark> E.5.3.2.3.9.2 Classification of defects <ammo.defect> E.5.3.2.3.9.3 Handling <ammo.handling> E.5.3.2.3.9.4 Procedures needed to activate ammunition, mines, etc. <arm> E.5.3.2.3.10 Other service upon receipt tasks <other.surtsk> E.5.3.2.3.11 Follow-on maintenance <followon.maintsk> E.5.3.3 Equipment/user fitting instructions work package <perseqpwp> E.5.3.3.1 Work package identification <wpidinfo> E.5.3.3.2 Work package initial setup <initial_setup> E.5.3.4 Preventive Maintenance Checks and Services (PMCS) (except for aircraft TMs, DMWRs, and NMWRs) E.5.3.4.1 Preventive Maintenance Checks and Services (PMCS) introduction work package <pmcsintrowp> E.5.3.4.1.1 Work package identification information <wpidinfo> E.5.3.4.1.2 Work package initial setup <initial_setup> E.5.3.4.1.3 Preventive Maintenance Checks and Services (PMCS) data E.5.3.4.2 Preventive Maintenance Checks and Services (PMCS) work package

<pmcswp> E.5.3.4.2.1 Work package identification information <wpidinfo> E.5.3.4.2.2 Work package initial setup <initial_setup> E.5.3.4.2.3 Preventive Maintenance Checks and Services (PMCS) procedures E.5.3.4.2.3.1 Preventive Maintenance Checks and Services (PMCS) data preparation <pmcstable> E.5.3.4.2.3.1.1 Item number <itemno> E.5.3.4.2.3.1.2 Intervals <interval> E.5.3.4.2.3.1.3 Man-hours <manhours> E.5.3.4.2.3.1.4 Item to be checked or serviced <checked> E.5.3.4.2.3.1.5 Procedure <pmcsproc> E.5.3.4.2.3.1.6 Not mission capable if: <eqpnotavail> E.5.3.4.2.4 Mandatory replacement parts <mrplpart> E.5.3.4.3 Preventive Maintenance Checklist (PMC)

PARAGRAPH PAGE

xxxiv

E.5.3.5 Maintenance work packages (not required for aircraft PM and PMS manuals) <maintwp>

E.5.3.5.1 Work package identification information <wpidinfo> E.5.3.5.2 Work package initial setup <initial_setup> E.5.3.5.3 Maintenance tasks <maintsk> E.5.3.5.3.1 Maintenance task requirements E.5.3.5.3.2 Inspect <inspect> E.5.3.5.3.2.1 Inspect during assembly E.5.3.5.3.2.2 Inspection of ammunition, or components including those that contain radioactive materials (Maintainer, below depot sustainment, or ASB only)

E.5.3.5.3.2.2.1 Specific instructions for inspection of radioactive ammunition, chemical ammunition, or components

E.5.3.5.3.2.2.2 Specific instructions for inspection of non-radioactive ammunition, chemical ammunition, or components

E.5.3.5.3.2.3 Pre-embarkation inspection of materiel in units alerted for overseas movement

E.5.3.5.3.2.4 Inspec