Att_2_65DS_Spec_Response_Matrix.xlsx
XLSX spreadsheet 20 KB Posted
- Attached to
- 65' Dive Support Boat
- Solicitation number
- N0002418R2209
About this file
Attachment 2
View the file
Other files
Show all 22
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Att 2 Spec Response Matrix
| ATTACHMENT 2 |
| 65 Foot Dive Support Craft |
| SPECIFICATION RESPONSE MATRIX |
NOTES & INSTRUCTIONS:
Offerors to submit Attachment 2 with response for parameters identified in the Specification (See Section J).
1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements;
2. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA): xx.xx feet (ft) |
| 070-1 | Enter Length Excluding Swim Platform (LOA): xx.xx ft |
| 070-1 | Enter Hull Length (Lhull): xx.xx ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft |
| 070-1 | Enter Hull (hard) Beam: xx.x ft |
| 070-1 | Enter Height, Keel to Fixed Structure: xx.x ft |
| 070-1 | Enter Height, Keel to Moveable Structure: xx.x ft |
| 070-1 | Deadrise (if any): xx deg at transom; xx deg at midship |
| 070-1 | Enter Total Installed Fuel Capacity: xxx gallons |
| 070-1 | Enter Full Load Weight (as defined in Section 070-3): |
xxx lbs incl x% margin
| 070-1 | Enter Longitudinal Center of Gravity (LCG) in Full Load: xx.x ft forward of transom/keel intersect |
| 070-1 | Enter Vertical Center of Gravity (VCG) in Full Load: |
xx.x ft above reference baseline
| 070-1 | Enter Full Load Draft to lowest extremity: x.x ft at Full Load |
| 070-1 | Enter Maximum Speed: xx knots (kts) in Full Load |
| 070-1 | Range at 10 knots: xx nautical miles (nm) |
| 070-1 | Enter list of submitted drawings describing the proposed boat. |
| 080-2 | Proposed Delivery Schedule - Verify Attachment 4 submitted in Vol I. |
| 083-1 | Initial Spares List - Verify Attachment 3 submitted in Vol II for each configuration. |
| 100 | General Requirements for Hull Structure - Verify that a description of the builder's welding qualification program is included in Vol I. |
| 233-1 | Inboard Diesel Engines - Verify speed and static bollard pull required in Spec can be achieved on proposed boat using specified engines. |
| 233-2 | Provide specific make/model of propulsion engine starters. |
| 233-3 | Provide specific make/model of propulsion engine alternators. |
| 310-1 | Provide specific model/rating of generators. |
| 512-2 | Specify make/model of ventilation equipment. |
| 512-4 | Notice to Builders: Provide specific make/model of engine compartment and dive equipment room blowers with response. |
| 512-5 | Provide specific make/model and estimated heating/cooling capacities for manned compartment heat and air conditioning system. |
| 568-1 | Specify Bow Thruster make/model and Hydraulic Power Source make/model. |
| All | 65 Foot Dive Support (DS) Boat Specification - Enter "Comply" to agree to comply with all specification requirements. |
| Offeror's Notes: |
&12RFP N000
Example Response
| ATTACHMENT 2 |
| CNIC WORK BOAT MEDIUM |
| SPECIFICATION RESPONSE MATRIX - EXAMPLE RESPONSE |
See below for partial example responses.
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA): xx.xx feet (ft) | 30.0 ft |
| 070-1 | Enter Hull Length (Lhull): xx.xx ft | 29.0 ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft | 15.0 ft |
| 070-1 | Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water | 9.5 kts at 1,800 rpm |
| 070-3 | Enter list of submitted drawings describing the proposed boat. | 100-123456 Gen'l Arr |
100-123457 Transport (Continue per Sect L)
| 083-1 | Initial Spares List - Verify Attachment 2 submitted in Vol II for each configuration. | Verified |
| 223-1 | Inboard Diesel Engines - Verify speeds and static bollard pull required in Spec can be achieved on proposed boat using specified engines. | Verified |
| All | CNIC Work Boat Medium Specification - Enter "Comply"; or enter "Comply w/ Exceptions" AND provide rationale for exceptions in notes below. | Comply w/ Exceptions |
| Offeror's Notes: | ||
| 313-3: Exception: Builder has no local distributor for Blue Seas voltmeters. Builder proposes a BrandX Model xxx123 voltmeter in lieu of a Blue Seas voltmeter specified. A catalog sheet for BrandX Model xxx123 is included in Vol I. Builder has used BrandX voltmeters in 300 boats in similar applications. |
File details come from the government source that posted it.