LCS SEC Attachment J-11 Logistics Mgnt Info Wkshts.pdf

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-111

DATA PRODUCT DELIVERABLE:

This worksheet is used to select data deemed necessary by the government. Data should be used to feed down stream

Government process.

SELECT EXPLANATION

A As applicable N New “P” source code items

B Packaging, Bulk items O “Ref” items only

C COTS items P All “P” source code items

D Developmental items R Repairables only

E Support Equipment S SRA/SRU items

F First appearance items only T Registered Support Equipment Only

I NDI items U Non-Registered Support Equipment Only

L LRU/WRA items Y National Stock Number items

M Packaging, Common items X Data product required on all items

NOTE: Other codes may be assigned by the program office as identified below. Program specific selections and explanations.

Z - Unique to LSAR and ICAPS software. Not a part of Data Product Deliverable format or LMI Specification

(MIL-PRF-49506). NOTE FOR THE PM: SEE SECTION 4 OF THE PMG FOR ADDITIONAL GUIDANCE IN

SELECTING DATA REQUIREMENTS. This LMI Worksheet has been modified for Navy use.

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-112

DATA PRODUCT DELIVERABLES

DPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL ADDITIONAL INFORMATION

0010 ALLOWANCE ITEM CODE (AIC) A A A A A Record D, Block 50

0020 ALLOWANCE ITEM QUANTITY A A A A A Record D, Block 51

0030 ALTERNATE INDENTURED PRODUCT CODE (AIPC)

ALTERNATE IPC - UUT

0040 AUTOMATIC DATA PROCESSING EQUIPMENT CODE Record B, Block 28

0050 BASIS OF ISSUE (BOI) Record J, Block 87

QUANTITY AUTHORIZED (QTY-AUTH)

END ITEM

LEVEL

CONTROL

CALIBRATION AND MEASUREMENT REQUIREMENTS SUMMARY

RECOMMENDED

0070 CALIBRATION INTERVAL

0080 CALIBRATION ITEM

0090 CALIBRATION PROCEDURE

0100 CALIBRATION REQUIRED

0110 CALIBRATION TIME

0120 CHANGE AUTHORITY NUMBER X Record F, Block 66

0130 CLEANING AND DRYING PROCEDURE

0140 COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE X X X X X Record A, Block 5

CAGE CODE - ADAPTER INTERCONNECTOR DEVICE

CAGE CODE – ARN Record A, CSN>001, Block 5

CAGE CODE - ARN ITEM

CAGE CODE - ARTICLES REQUIRING SUPPORT

CAGE CODE – ATE

CAGE CODE - CATEGORY III SE

CAGE CODE – CTIC

CAGE CODE - PACKAGING DATA PREPARER

CAGE CODE - SUPPORT EQUIPMENT

CAGE CODE - TEST PROGRAM SET

CAGE CODE – UUT

CONTRACTOR FURNISHED EQUIPMENT/GOVERNMENT

FURNISHED EQUIPMENT (CFE/GFE)

0160 CONTRACTOR RECOMMENDED

CONTRACTOR RECOMMENDED - DDCC

CONTRACTOR RECOMMENDED - IRCC

0170 CONTRACTOR TECHNICAL INFORMATION CODE (CTIC) Record E, Block 61

0180 CONTROLLED INVENTORY ITEM CODE Record B, Block 26

0190 CRITICALITY CODE Record J, Block 88

0200 CUSHIONING AND DUNNAGE MATERIAL CODE

0210 CUSHIONING THICKNESS

0220 DEGREE OF PROTECTION CODE

0230 DEMILITARIZATION CODE (DMIL) A A A A A Record B, Block 23

DESCRIPTION/FUNCTION AND CHARACTERISTICS OF SUPPORT

EQUIPMENT

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-113

DPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL ADDITIONAL INFORMATION

0250 DESIGN DATA CATEGORY CODE

0260 DESIGN DATA PRICE

0270 END ITEM ACRONYM CODE (EIAC)

0280 ESSENTIALITY CODE X X X X X Record A, Block 11

0290 ESTIMATED PRICE X X X X X

ESTIMATED PRICE - DDCC

ESTIMATED PRICE - IRCC

0300 FIGURE NUMBER Record J, Block 81

0310 FRAGILITY FACTOR

0320 FUNCTIONAL ANALYSIS

0330 FUNCTIONAL GROUP CODE

0340 HARDNESS CRITICAL ITEM (HCI) Record B, Block 25

0350 HARDWARE DEVELOPMENT PRICE

0360 HAZARDOUS CODE

0370 INDENTURE CODE A A A A A Record A, Block 4

ATTACHING PART/HARDWARE

OPTION 1

OPTION 2

OPTION 3

OPTION 4

OPTION 5

INDENTURE FOR KITS

OPTION 1

OPTION 2

OPTION 3

INDENTURE CODE - IPC

0380 INDENTURED PRODUCT CODE (IPC) Record H, Block 77. Change Field Length to 18X

INDENTURED PRODUCT CODE (IPC) - UUT

0390 INPUT POWER SOURCE

OPERATING RANGE - MINIMUM

OPERATING RANGE - MAXIMUM

ALTERNATING CURRENT/DIRECT CURRENT

FREQUENCY RANGE - MINIMUM

FREQUENCY RANGE - MAXIMUM

PHASE

WATTS

PERCENT MAXIMUM RIPPLE

0400 INSTALLATION FACTORS OR OTHER FACILITIES

0410 INTEGRATED LOGISTIC SUPPORT PRICE

INTEGRATED LOGISTIC SUPPORT REQUIREMENTS CATEGORY

CODE

0430 INTERCHANGEABILITY CODE A

Record F, Block 67, Part Number Adds, Changes, and Deletes

0440 INTERMEDIATE CONTAINER CODE

0450 INTERMEDIATE CONTAINER QUANTITY

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-114

DPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL ADDITIONAL INFORMATION

0460 ITEM CATEGORY CODE (ICC)

0470 ITEM DESIGNATOR CODE Header Block

ITEM DESIGNATOR - END ARTICLE

ITEM DESIGNATOR - GOVERNMENT

0480 ITEM NAME X X X X X Record A, Block 12. Change Field Length to 19X

ITEM NAME - ARTICLE REQUIRING SUPPORT

ITEM NAME - SE

0490 ITEM NAME CODE Record J, Block 89

0500 ITEM NUMBER Record J, Block 82

0510 JULIAN DATE - SPI NUMBER

0520 LINE REPLACEABLE UNIT (LRU) Record J, Block 90

0530 LOT QUANTITY

FROM

TO

0540 MAINTENANCE ACTION CODE (MAC) Record C, Block 41

0550 MAINTENANCE REPLACEMENT FACTOR (MRF)

MRF - DEPOT LEVEL REPAIRABLES

MRF - FIELD LEVEL REPAIRABLES

MRF - CONSUMABLES

0560 MAINTENANCE REPLACEMENT RATE I (MRRI) X X X X X Record C, Block 34

0570 MAINTENANCE REPLACEMENT RATE II (MRRII) Record C, Block 35

OPTION 1

OPTION 2

0580 MAINTENANCE TASK DISTRIBUTION Record E, Block 57

0590 MATERIAL Record M, Block 92

0600 MATERIAL LEADTIME

0610 MATERIAL WEIGHT

0620 MAXIMUM ALLOWABLE OPERATING TIME (MAOT) Record C, Block 40

0630 MEAN TIME BETWEEN FAILURES (MTBF)

MEAN TIME BETWEEN FAILURES (MTBF)- SUPPORT

EQUIPMENT (SE)

0640 MEAN TIME TO REPAIR (MTTR)

MEAN TIME TO REPAIR (MTTR) - SE

0650 MEASUREMENT BASE (MB)

MEASUREMENT BASE - MTBF

MEASUREMENT BASE - MTBF-SE

MEASUREMENT BASE - WEAROUT LIFE

0660 METHOD OF PRESERVATION

0670 MOBILE FACILITY CODE

0680 NATIONAL STOCK NUMBER AND RELATED DATA A A A A A

Record B, Block 15, Required if Contract Option is exercised.

COGNIZANCE CODE A A A A A

MATERIEL CONTROL CODE A A A A A

FEDERAL SUPPLY CLASSIFICATION A A A A A

NATIONAL ITEM IDENTIFICATION NUMBER A A A A A

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-115

DPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL ADDITIONAL INFORMATION

NATIONAL STOCK NUMBER - CONTAINER

FEDERAL SUPPLY CLASSIFICATION

NATIONAL ITEM IDENTIFICATION NUMBER

SPECIAL MATERIEL IDENTIFICATION CODE/MATERIEL

MANAGEMENT AGGREGATION CODE A A A A A

ACTIVITY CODE

NEXT HIGHER ASSEMBLY PROVISIONING LIST ITEM SEQUENCE

NUMBER (NHA PLISN) X X X X X

Record C, Block 29, Automatically assigned by

ICAPS.

NEXT HIGHER ASSEMBLY PROVISIONING LIST ITEM SEQUENCE

NUMBER INDICATOR (NHA IND) Record C, Block 30

0710 NOT REPARABLE THIS STATION (NRTS) Record C, Block 42

0720 OPERATOR'S MANUAL

0730 OPTIONAL PROCEDURE INDICATOR

0740 OVERHAUL REPLACEMENT RATE (ORR) Record C, Block 31

0750 PACKAGING CATEGORY CODE

0760 PACKING CODE

0770 PARAMETERS

INPUT/OUTPUT CODE - CATEGORY III SE

PARAMETER - CATEGORY III SE

RANGE FROM - CATEGORY III SE

RANGE TO - CATEGORY III SE

ACCURACY - CATEGORY III SE

RANGE/VALUE CODE - CATEGORY III SE

INPUT/OUTPUT CODE - SUPPORT EQUIPMENT

PARAMETER - SUPPORT EQUIPMENT

RANGE FROM - SUPPORT EQUIPMENT

RANGE TO - SUPPORT EQUIPMENT

ACCURACY - SUPPORT EQUIPMENT

RANGE/VALUE CODE - SUPPORT EQUIPMENT

INPUT/OUTPUT CODE - UUT

PARAMETER - UUT

RANGE FROM - UUT

RANGE TO - UUT

ACCURACY - UUT

RANGE/VALUE CODE - UUT

OPERATIONAL/SPECIFICATION PARAMETER

0780 PASS THROUGH PRICE

0790 PRECIOUS METAL INDICATOR CODE (PMIC) A A A A A Record B, Block 27

0800 PREPARING ACTIVITY

0810 PRESERVATION MATERIAL CODE

PRIOR ITEM PROVISIONING LIST ITEM SEQUENCE NUMBER (PRIO

ITEM PLISN) X X X X X

Record C, Block 39, Automatically assigned by

ICAPS

0830 PRODUCTION LEAD TIME (PLT) A A A A A Record B, Block 24

0840 PROGRAM PARTS SELECTION LIST (PPSL) Record A, Block 10

0850 PRORATED EXHIBIT LINE ITEM NUMBER (PRORATED ELIN) Record G, Block 75

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-116

DPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL ADDITIONAL INFORMATION

0860 PRORATED ELIN QUANTITY Record G, Block 76

0870 PROVISIONING CONTRACT CONTROL NUMBER (PCCN) X X X X X Records A through M, Block 1

0880 PROVISIONING LIST CATEGORY CODE (PLCC) Record D, Block 48

0890 PROVISIONING LIST ITEM SEQUENCE NUMBER (PLISN) X X X X X Records A through M, Block 2

0900 PROVISIONING NOMENCLATURE A A A A A Record K, Block 91, Change Field Length to 42X

0910 PROVISIONING PRICE CODE

0920 PROVISIONING REMARKS Record H, Block 79,Change Field Length to 65X

0930 QUANTITY PER ASSEMBLY (QPA) X X X X X Record C, Block 32

OPTION 1 X X X X X

OPTION 2

OPTION 3

0940 QUANTITY PER ASSEMBLY/QUANTITY PER END ITEM INDICATOR

0950 QUANTITY PER END ITEM (QPEI) X X X X X Record C, Block 33

OPTION 1 X X X X X

OPTION 2

OPTION 3

0960 QUANTITY PER FIGURE Record J, Block 85

0970 QUANTITY PER TEST

0980 QUANTITY PER UNIT PACK Record B, Block 21

0990 QUANTITY PROCURED Record F, Block 73

1000 QUANTITY SHIPPED Record F, Block 72

1010 RECOMMENDED MINIMUM SYSTEM STOCK LEVEL Record D, Block 53

1020 RECURRING COST

1030 REFERENCE DESIGNATION A A A A A Record D, Block 44, Change Field Length to 29X

OPTION 1 A A A A A

Required for Electronic Items having Circuit Symbol Numbers

OPTION 2

OPTION 3

OPTION 4

OPTION 5

1040 REFERENCE DESIGNATION CODE (RDC) A A A A A Record D, Block 46

1050 REFERENCE NUMBER X X X X X Record A, Block 6

REFERENCE NUMBER - AID

REFERENCE NUMBER - ARN ITEM

REFERENCE NUMBER - ARTICLES REQUIRING SUPPORT

REFERENCE NUMBER - AUTOMATIC TEST EQUIPMENT

REFERENCE NUMBER - CATEGORY III SE

REFERENCE NUMBER - SUPPORT EQUIPMENT

REFERENCE NUMBER - TPS

REFERENCE NUMBER - UUT

REFERENCE NUMBER (ARN) - ADDITIONAL Record A, Block 6, CSN>001

1060 REFERENCE NUMBER CATEGORY CODE (RNCC) X X X X X Record A, Block 7

REFERENCE NUMBER CATEGORY CODE - ARN A A A A A

1070 REFERENCE NUMBER VARIATION CODE (RNVC) X X X X X Record A, Block 8

REFERENCE NUMBER VARIATION CODE - ARN A A A A A

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-117

DPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL ADDITIONAL INFORMATION

1080 REPAIR CYCLE TIME Record E, Block 58

OPTION 1

OPTION 2

REPLACED OR SUPERSEDING PROVISIONING LIST ITEM

SEQUENCE NUMBER Record F, Block 70

REPLACED OR SUPERSEDING PROVISIONING LIST ITEM

SEQUENCE NUMBER Record F, Block 71

1110 REPLACEMENT TASK DISTRIBUTION Record E, Block 59

1120 REVISION

REVISION - SERD

1130 REWORK REMOVAL RATE (RRR)

1140 ROTATABLE POOL FACTOR (RPF)

SAME AS PROVISIONING LIST ITEM SEQUENCE NUMBER (SAME

AS PLISN) X X X X X

Record G, Block 38, Automatically assigned by

ICAPS

1160 SCOPE

SCOPE - DDCC

SCOPE - IRCC

1170 SERIAL NUMBER EFFECTIVITY Record F, Block 68

SERIAL NUMBER EFFECTIVITY - FROM

SERIAL NUMBER EFFECTIVITY - TO

1180 SERVICE DESIGNATOR CODE (SER)

SERVICE DESIGNATOR CODE - SE

SERVICE DESIGNATOR CODE - USING

1190 SHELF LIFE (SL) A A A A A

Record A, Block 13. Required when Source Code

= PC

1200 SHELF LIFE ACTION CODE (SLAC) A A A A A

Record A, Block 14, Required when there is a Shelf Life

1210 SKILL SPECIALTY CODE FOR SUPPORT EQUIPMENT OPERATOR Record D, Block 49

1220 SOURCE, MAINTENANCE AND RECOVERABILITY (SMR) CODE A A A A A Record B, Block 22

SMR CODE - SE

1230 SPARES ACQUISITION INTEGRATED WITH PRODUCTION (SAIP)

1240 SPECIAL MAINTENANCE ITEM CODE (SMIC) Record D, Block 49

1250 SPECIAL MARKING CODE

1260 SPECIAL MATERIAL CONTENT CODE (SMCC)

1270 SPECIAL PACKAGING INSTRUCTION NUMBER

1280 SPECIAL PACKAGING INSTRUCTION (SPI) NUMBER REVISION

1290 SUPPLEMENTAL PACKAGING DATA

1300 SUPPORT EQUIPMENT DIMENSIONS

SE DIMENSIONS OPERATING

LENGTH

WIDTH

HEIGHT

SE DIMENSIONS SHIPPING

LENGTH

WIDTH

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-118

DPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL ADDITIONAL INFORMATION

HEIGHT

SE DIMENSIONS STORAGE

LENGTH

WIDTH

HEIGHT

1310 SUPPORT EQUIPMENT EXPLANATION

SUPPORT EQUIPMENT RECOMMENDATION DATA NUMBER (SERD

NUMBER)

SUPPORT EQUIPMENT RECOMMENDATION DATA

REVISION/SUPERSEDURE REMARKS

1340 SUPPORT EQUIPMENT WEIGHT

SUPPORT EQUIPMENT WEIGHT - OPERATING

SUPPORT EQUIPMENT WEIGHT - SHIPPING

SUPPORT EQUIPMENT WEIGHT - STORAGE

1350 TECHNICAL MANUAL CHANGE NUMBER (TM CHG) Record J, Block 83

1360 TECHNICAL MANUAL INDENTURE CODE (TM IND) Record J, Block 84

1370 TECHNICAL MANUAL NUMBER

1380 TEST ACCURACY RATIO (TAR)

TEST ACCURACY RATIO - CATEGORY III SE

TEST ACCURACY RATIO - UUT PARAMETER

1390 TOTAL ITEM CHANGES (TIC) Record F, Block 69

1400 TOTAL QUANTITY RECOMMENDED Record C, Block 37

1410 TYPE EQUIPMENT CODE

1420 TYPE OF CHANGE CODE (TOCC) A A A A A Record A, Block 3

1430 TYPE OF PRICE CODE

1440 TYPE OF STORAGE CODE

1450 UNIT CONTAINER CODE

1460 UNIT CONTAINER LEVEL

1470 UNIT OF ISSUE (UI) X X X X X Record B, Block 18

1480 UNIT OF ISSUE CONVERSION FACTOR (UI CONVERSION FACTOR) A A A A A

Record B, Block 20, Required if UI not equal to

EA

1490 UNIT OF ISSUE/UNIT OF MEASURE CODE A A A A A

1500 UNIT OF ISSUE/UNIT OF MEASURE PRICE (UI/UM PRICE) A A A A A

Record B, Unit of Issue Price=Block 19. Unit of Measure Price=Block 17 (only if UM is assigned).

1510 UNIT OF MEASURE (UM) A A A A A

Record B, Block 16. Guidance for assignment provided at PGC.

UNIT OF MEASURE - SE DIMENSIONS OPERATING

UNIT OF MEASURE - SE WEIGHT OPERATING

UNIT OF MEASURE - SE DIMENSIONS STORAGE

UNIT OF MEASURE - SE WEIGHT STORAGE

UNIT OF MEASURE - SE DIMENSIONS SHIPPING

UNIT OF MEASURE - SE WEIGHT SHIPPING

1520 UNIT PACK CUBE

1530 UNIT SIZE

UNIT SIZE - LENGTH

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-119

DPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL ADDITIONAL INFORMATION

UNIT SIZE - WIDTH

UNIT SIZE - HEIGHT

UNIT SIZE - PACK LENGTH

UNIT SIZE - PACK WIDTH

UNIT SIZE - PACK DEPTH

1540 UNIT UNDER TEST EXPLANATION

1550 UNIT WEIGHT

UNIT WEIGHT - PACK

1560 USABLE ON CODE (UOC) A Record D, Block 43

USABLE ON CODE - DESIGN CHANGE A

USABLE ON CODE - SUPPORT EQUIPMENT

1570 WEAROUT LIFE

1580 WORK UNIT CODE Record J, Block 86

WORK UNIT CODE - ARTICLES REQUIRING SUPPORT

1590 WRAPPING MATERIAL

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-1110

SUPPLEMENTAL PROVISIONING DATA PRODUCTS*

DATA PRODUCT DELIVERABLES

SDPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL ADDITIONAL INFORMATION

S001 ACCEPTANCE CODE 1 A

S002 ACQUISITION METHOD CODE (AMC) 1 A/N

S003 ACQUISITION METHOD SUFFIX CODE (AMSC) 1 A/N

S004 ALLOWANCE EQUIPAGE LIST QUANTITY (AELQTY) 25 A/N (3 A/N 7 TIMES AND 4 A/N 1 TIME)

S005

ALTERNATE NATIONAL ITEM IDENTIFICATION

NUMBER (ALTNIIN)

1 A/N

S006 ALTERNATE NIIN RELATIONSHIP CODE (ANRC) 9A/N

S007 CALCULATION 1 A (X)

S008 COMPONENT IDENTIFICATION DATA (CID)^ A A A A A

See the “Expanded Component Identification Data (CID) Format Table” Provided Below.

S009 CONTROL DATA 10 A/N

S010

DESIGN CHANGE NOTICE USABLE ON CODE (DCN

UOC)

A 8 A/N

S011

DESIGNATED REWORK/OVERHAUL POINT (DOP)

(DESREWRK)

A A A A A 12 A/N

S012 DOCUMENT AVAILABILITY CODE (DAC) 1 A/N

S013 FORMAT INDICATOR 2 A/N

S014 HEADER REMARKS A/N

S015 ITEM MANAGEMENT CODE (IMC) 1 A

S016

KEY PROVISIONING CONTRACT CONTROL NUMBER

(KEY PCCN)

6 A/N

S017 LIST DATE SUBMITTED 8 N (MMDDYYYY)

S018

MAINTENANCE REPLACEMENT RATE MODIFIER

(MRRMOD)

7 A/N

S019

MINIMUM REPLACEMENT UNIT (MRU)/FAILURE

FACTOR II

X X X X X 3 N

S020 NOMENCLATURE OR MODEL OR TYPE NUMBER 21 A/N

S021

PROCUREMENT INSTRUMENT IDENTIFICATION (PII

INCLUDING PIIN/SPIIN)

19 A/N

S022 PROJECT TYPE 1A

S023 RECOMMEND INITIAL SYSTEM STOCK BUY (RISS BUY) 3 N

S024 RECOMMENDED TENDER LOAD LIST QUANTITY (RTLL) 3 N

S025 REFERENCE DESIGNATION OVERFLOW CODE (RDOC) A A A A A 1 A

S026 RELIABILITY BLOCK DIAGRAM (RBD) 10 A/N

S027 REMAIN IN PLACE INDICATOR (RIP IND) A A 1 A

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443 Attachment J-1111

SDPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL ADDITIONAL INFORMATION

S028 REMARKS A A A A A 45 A/N

S029 REPAIRABLE IDENTIFICATION CODE (RIC) 10 A/N

S030 REPAIR SURVIVAL RATE (RSR) 3 N

S031 SUBMISSION CONTROL CODE (SCC) 5 N

S032 SUPPLEMENTAL NOMENCLATURE 25 A/N

* These Supplemental Data Products are not in the LMI Specification. See the narrative portion of this LMI Worksheet for definitions and format requirements.

^ See the Expanded Component Identification Data (CID) Format Table for detailed requirements.

LMI WORKSHEET MODIFIED FOR NAVY USE N00024-21-R-4443

Attachment J-11

EXPANDED COMPONENT IDENTIFICATION DATA (CID) FORMAT TABLE

DATA PRODUCT DELIVERABLES

SDPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL SPS ADV RIC ADDITIONAL INFORMATION

HEADER DATA

PROVISIONING CONTRACT CONTROL NUMBER

(PCCN)

X X X X X X X 6 A/N

S021

PROCUREMENT INSTRUMENT IDENTIFICATION (PII

INCLUDING PIIN/SPIIN)

X X X X X X X 19 A/N

S020 NOMENCLATURE OR MODEL OR TYPE NUMBER X X X X X X 21 A/N

S009 CONTROL DATA X X X X X X X 10 A/N

PRIME COMMERCIAL AND GOVERNMENT ENTITY

(CAGE CODE)

X X X X X X 5 A/N

S031 SUBMISSION CONTROL CODE (SCC) X X X X X X X 5 N

S017 LIST DATE SUBMITTED X X X X X X X 6 A/N

S013 FORMAT INDICATOR X X X X X X X 2 A/N

S016 1ST KEY PCCN A A A A A A A 6 A/N

S016 2ND KEY PCCN A A A A A A A 6 A/N

S029 REPAIRABLE IDENTIFICATION CODE (RIC) A A A A A A 10 A/N

S022 PROJECT TYPE X X X X X X X 1 A

S007 CALCULATION X X X X X X X 1 A

S028 REMARKS A A A A A A X

43 X L; For Advance RICs, the submitter must identify Date Advance RIC was requested and Scheduled date for complete PTD to be provided to the NAVSEA

TSA.

COMPONENT CHARACTERISTICS FILE (CCF) DATA

S008 MFR X X X X X X 56 XL

S008 NAVCOM PLAN A A A A A A 56 XL

S008 MFR DWG X X X X X X 56 XL(HM&E/ORDNANCE ONLY)

S008 MFR ID X X X X X X 56 XL(HM&E/ORDNANCE ONLY)

S008 PATTERN NO A A A A A A 56 XL(HM&E/ORDNANCE ONLY)

S008 EQUIP SPEC A A A A A A 56 XL(HM&E/ORDNANCE ONLY)

DATA PRODUCT DELIVERABLES

SDPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL SPS ADV RIC ADDITIONAL INFORMATION

S008 NSN A A A A A A 56 XL

S008 LAPL A A A A A A 56 XL (HM&E/ORDNANCE ONLY)

S008 MARK A A A A A A 56 XL (ORDNANCE ONLY)

S008 MODEL A A A A A A 56 XL (ORDNANCE ONLY)

S008 NHA A A A A A A 56 XL (ELECTRONICS ONLY)

S008 EIC A A A A A A 56 XL (ELECTRONICS ONLY)

S008 COMMERCIAL NOMEN A A A A A A 56 XL (ELECTRONICS ONLY)

S008 CONTRACT NO A A A A A A 56 XL (ELECTRONICS ONLY)

S008 SOURCE OF APL INFO A A A A A A 56 XL (ELECTRONICS ONLY)

S008 TECH MANUAL A A A A A A 56 XL (ELECTRONICS ONLY)

S008 PROV PARTS LIST A A A A A A 56 XL (ELECTRONICS ONLY)

S008 CHARACTERISTICS DATA X X X X X X

56 XL (UNLIMITED ENTRIES);

CHARACTERISTICS DATA

SHOULD PROVIDE THE

REASON FOR PROVISIONING,

I.E., SHIPALT, MACHALT, AER,

ETC., AND THE ALTERATION

NUMBER ASSIGNED. EXAMPLE:

SHIPALT CG47-0586D.

S008 TECHNICAL MANUAL NUMBER A A A A A A 56 XL

S008 CERTIFICATION DATA SHEET NO. A A A A A A 56 XL

APPLICATION DATA

S008 NEXT HIGHER ASSEMBLY (NHA) X X X X X X 25 XL

S008 NEXT LOWER ASSEMBLY (NLA) A A A A A 25 XL

S008

NAVY HULL NOS./ACTIVITY UNIT IDENTIFICATION

CODE (UIC)

X X X X X X X 6 XL

S008 NUMBER OF COMPONENTS X X X X X X 4 XL

S008 SERVICE APPLICATION DATA X X X X X X X 32 XL

CERTIFICATION DATA

S008 POC DATA (NAME) X X X X X X X 15 XL

S008 POC DATA (ORGANIZATION/CODE) X X X X X X X 15 XL

S008 POC DATA (PHONE) X X X X X X X 15 XL

DATA PRODUCT DELIVERABLES

SDPDN DATA PRODUCT TITLE LLTIL PPL ISIL TTEL SCPL DCN SLPPL SPS ADV RIC ADDITIONAL INFORMATION

STATEMENT OF PRIOR SUBMISSION (SPS)

S008 SPS PREVIOUS ORDER NUMBER X 32 XL

S008 PROVISIONING ACTIVITY RECEIVING PREVIOUS PTD X 32 XL

S008

NATIONAL STOCK NUMBER (NSN) OR NAVY ITEM

CONTROL NUMBER (NICN)

X 32 XL

S008

ELECTRICAL, MECHANICAL, PHYSICAL, AND

DIMENSIONAL DATA

X 32 XL

S008

NUMBER OR PERCENT OF CHANGES TO UPDATE

PTD TO NEW CONFIGURATION

X 32 XL

S008 BRIEF DESCRIPTION OF CHANGES X 32 XL

Note: The Supplemental Data Products (those with a prefix “S”) are not in the LMI Specification. See the narrative portion of this worksheet for definitions and format requirements for CID.