Amendment0007_13RP30T85.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE PAGE OF PAGES

1 2

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

0007 14 NOV 12 21-13-853P45T85

6. ISSUED BY CODE HSCG85 7. ADMINISTERED BY (If other than Item 6) CODE

COMMANDER

SURFACE FORCES LOGISTICS CENTER C&P2

1301 CLAY ST. STE 807N

OAKLAND, CA 94612-5217

8. NAME AND ADRESS OF CONTRACTOR (no., street, county, State and ZIP Code) √ 9.A AMENDMENT OF SOLICITATION NO.

HSCG85-13-R-P30T85

9B. DATE (SEE ITEM 11)

18 OCT 12

10A. MODIFICATION OF CONTRACT/ORDER

NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing Items 8 and 15, and returning 1 copy of the amendment; (b) By acknowledging receipt of this amendment on each copy of the Offer submitted: or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

√ A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT/.ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc)

SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority).

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

USCGC SEQUOIA (WLB 215) FY13 DRYDOCKING REPAIRS

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remain unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY

(Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV. 10-83)

)PREVIOUS EDITION UNUSABLE Prescribed by GSA, FAR (48 CFR) 53.2

HSCG85-13-R-P30T85 Amendment 0007

1. Response(s) to Request(s) for Clarification N/A is/are provided as Attachment A.

2. A revised specification (Rev-1), which incorporates approximately a 70% change in the package, is provided as an attachment to this amendment. A color-coded table of the revised specification notes the extent of changes and is provided as Attachment A. The table is provided as a courtesy and is a representative (not conclusive) itemization of the changes made. Please consider amendments 0001 – 0006 to be invalid for purposes of addressing the revised specification. If you have questions regarding the revised specification, please submit new clarification requests rather than rely upon earlier answers. A new Schedule of Supplies and Request for Clarification Form are provided as attachments to this amendment.

3. On the SF1449, Block 8, offerors shall delete “14 NOV 12 (1100 Pacific)” and substitute “12 DEC 12 (1100 Pacific).” In block 20, offerors shall delete “(Rev-0, 10 September 2012)” and substitute “(Rev-1, 14 November 2012).” On page 2, offerors shall delete “12/22/12” and substitute “1/26/13.”

4. At this time, the period of performance has not changed. The proposal closing date is extended until:

12/12/12 1100 Pacific

A responsive proposal shall consist of the following:

a) Signed & dated SF1449 (2 pages) and Amendments starting with 0007

b) Completed Provision (26) Pre-Award Drydock Certs & Calcs

c) Completed Provision (33) Place of Performance (1 page)

d) Completed Provision (3) Info Regarding Responsibility Matters

e) Completed Provision (5) Prohibition…Corporate Expatriates

f) Any qualifications to FAR 52.212-3 (otherwise SFLC will consider your ORCA registration current, accurate, complete, and applicable (zero pages if no qualifications). Make sure your registration in SAM.gov is current and accurate.

g) Completed Electronic Spreadsheet Schedule of Supplies (1 page - submit electronically as a spreadsheet)

In addition to the requirements at (22) FAR 52.212-1 INSTRUCTIONS TO OFFERORS, you are encouraged to email a scanned copy of your proposal to the individual in Block 7.a.

at james.s.altice@uscg.mil. Please economize on the size of your emailed submission and please confirm receipt.

5. Shipchecks may be arranged by contacting vessel’s Engineering Officer, CWO Wendy Titensor. She can be reached via the following methods:

Ship’s Main Switchboard (671) 355-4885 Cell Phone (671) 688-0741 Email: Gwendolyn.A.Titensor@uscg.mil

ATTACHMENT A

Purple - new Blue - swapped for a newer version Yellow change between D and O Green - edited (major edits) Red - Deleted

ITEM DESCRIPTION

D-001 Hull Plating (U/W Body), Inspect

D-002 Hull Plating (U/W Body), Ultrasonic Testing

D-003 Appendages (U/W), Leak Test

D-004 Propulsion Shaft Fairwaters and Rope Guards, Inspect and Repair

O-005 Appendages (U/W) - Internal, Preserve

D-006 Chain Lockers, Clean

D-007 Voids (Non-Accessible), Leak Test

D-008 Chain Lockers, Inspect

O-009 Voids (Non-Accessible), Preserve Internal Surfaces

D-010 Propulsion Shafting Remove, Inspect, and Reinstall

D-011 Propulsion Shaft Seals, Mechanical Overhaul and Inflatable Renewal

D-012 Rudder, Inspect and Repair

O-013 Propulsion Tail Shaft Sleeve, Skim Cut

O-014 Propulsion Shaft Bearing, Stave Renewal

D-015 Controllable Pitch Propeller, System Maintenance

D-016 Controllable Pitch Propeller, Hub General Maintenance

D-017 Controllable Pitch Propellers, Clean and Inspect

D-018 Controllable Pitch Propeller Hub, Remove and Reinstall

O-019 Impressed Current Cathodic Protection System Dielectric Shield (Capastic Fairing ), Renew

O-020 Ship Service Diesel Generator, Overhaul

D-021 Circuit Breakers (60 Hz), Inspect and Test

D-022 Fathometer Transducer, General Maintenance

D-023 Underwater (Speed) Log Transducer, Renew

D-024 Vent Ducts (Laundry Exhaust), Commercial Cleaning

D-025 Vent Ducts (All Other), Commercial Cleaning

D-026 Sea Valves and Waster Pieces, Overhaul or Renew

D-027 Sea Strainers - Duplex (All Sizes), Overhaul

O-028 Rudder and Rudder Stock, Removal and Inspection

O-029 Sea Bay, Preserve 100%

D-030 Sea Bay, Clean and Inspect

D-031 Rudder Stock Bearings, Check Clearances

D-032 Thruster Units (General), Overhaul

D-033 Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test

D-034 Hydraulic Chain Stoppers, Overhaul

D-035 Crossdeck Winches, Overhaul

D-036 Hydraulic Inhaul Winch, Overhaul

D-037 Anchor Windlass, Level 2 Inspect and Repair

D-038 Anchor Chain(s) and Ground Tackle, Inspect and Repair

D-039 Tanks Fuel, Clean and Inspect

D-040 Buoy Crane, Inspect and Repair

O-041 Chain Locker, Preserve 100%

D-042 Decks - Exterior(Buoy), Preserve 100%

O-043 U/W Body, Preserve “100%”

O-044 U/W Body, Preserve “Partial – Condition A”

O-045 U/W Body, Preserve “Partial - Condition B”

O-046 U/W Body, Preserve “Partial - Condition C”

D-047 Cathodic Protection / Zinc Anodes, Renew

D-048 Impressed Current Cathodic Protection System, Inspect and Maintain

D-049 Impressed Current Cathodic Protection System Reference Cells, Renew

D-050 Drydocking

D-051 Temporary Services, Provide

D-052 Sea Trial Performance, Provide Support

D-053 Ventilation Fans (Vaneaxial), Overhaul

D-054 Firemain Valves, Overhaul Or Renew

D-055 Auxiliary Sea Water System Valves, Overhaul Or Renew

D-056 Piping Insulation, Renew

D-057 Hydraulic Steering Cooler, Install

O-058 SORS Cargo Hatch Coaming Renew

D-059 Sea Strainers (All Sizes), Renew

O-060 Decks - Exterior, Preserve ("MIL-Spec/Flight Deck" System) Aft Stack Deck

D-061 Potable Water System Valves, Overhaul or Renew

D-062 Bilges (Machinery Space), Stern Thruster Machinery Room, Preserve

D-063 Deck Covering (Interior Wet/Dry) – Cosmetic Polymeric, Repair

D-064 Ventilation Systems, Overhaul

D-065 Incinerator Fuel Oil Valves, Renew

D-066 D-Ring Renew

D-067 Reduction Gear Lube Oil Fill Piping Connection Assembly 01 Level, Renew

D-068 Small Boat Fueling and Aft Fill/Fueling Stations Piping, Renew

D-069 Fuel Oil Reach Rod Replacement

D-070 Gooseneck Vent Pipes, Renew

D-071 Clean Oil Valves and Piping, Renew

D-072 Hatch (Internal), renew

O-073 Hull Plating Freeboard, Preserve 100%

O-074 Propulsion Shaft Seals (Bulkhead), Overhaul

D-075 FWD Scan Sonar Transducer, General Maintenance

O-076 Watertight Doors (External), Renew

D-077 SORS Cargo Hatch Coaming Repair

D-078 Mechanical Chain Stoppers, Overhaul and Relocation

D-079 Deck Covering (Interior Wet), Renew

O-080 Impressed Current Cathodic Protection System Dielectric Shield (Capastic Fairing ), Repair

D-081 Temporary Messing and Berthing, Provide

O-082 Decks - Exterior, Preserve ("MIL-Spec/Flight Deck" System) Flying Bridge

O-083 Decks - Exterior, Preserve ("MIL-Spec/Flight Deck" System)Port Bridge Wing

O-084 Decks - Exterior, Preserve ("MIL-Spec/Flight Deck" System) Stbd Bridge Wing

D-085 Tanks (MP Fuel Stowage and Overflow), Clean

D-086 Tanks (Lube Oil), Clean and Inspect

D-087 Tanks (Dirty Oil and Waste), Clean and Inspect

O-00A Composite Labor Rate

D-00B GFP Report

O-00Z Laydays

D-012 Propulsion Shaft Bearings (External), Check Clearances

D-073 Incinerator, Overhaul

D-039 Buoy Crane Components, Preserve

D-028 Sea Strainers - Simplex (All Sizes), Clean and Inspect

D-019 Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean