2P30-S_Display_produce_end_cap_crate_style.pdf

INITIATED

11/07/17

CED

PRODUCE

DEPARTMENT

Minimal Acceptable Standards

REVISION

09/24/18

2P30-S Display, produce, end cap, crate style PAGE 1 of 2

FY16r.05

1 Purpose of this Equipment: To serve as end caps for produce displays and increase usable merchandising area.

2 Federal Supply Class: 7125

3 General Operating Specifications:

3.1 Dimensions:

3.1.1 2P30-S3R 36 inches long / wide, 12 inches deep, 50 inches high.

3.1.2 2P30-S3L 36 inches long / wide, 12 inches deep, 50 inches high.

3.1.3 Dimensional sizes may vary plus or minus 3 inches in any direction.

3.2 Salient Characteristics that shall be provided:

3.2.1 Oak construction.

3.2.2 Moisture resistant protective sealant.

3.2.3 Casters: 2 swivel and minimum 2 locking per end cap.

3.2.4 Creating a stacked crate effect.

3.2.5 Bottom of crate merchandising area to be one solid piece of wood.

3.3 Industry Standards / Requirement(s):

3.3.1 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.

3.4 Information Technology requirements: N / A

3.5 Color Requirement(s): Light Oak

4 Electrical Requirements: N / A

5 Standard Contractor Requirements:

5.1 Must be shipped assembled and ready to use

5.2 Information to be provided by the Contractor to the commissary at the time of delivery:

5.2.1 Point of Contact for Service

5.2.2 Installation and Operating Instructions

5.2.3 Parts List

5.3 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.

INITIATED

11/07/17

CED

PRODUCE

DEPARTMENT

Minimal Acceptable Standards

REVISION

09/24/18

2P30-S Display, produce, end cap, crate style PAGE 2 of 2

FY16r.05

6 Special Coordinating / Safety Instructions: N / A