2P08_Table_tilt-top_European_style.pdf
PDF 110 KB Posted
- Attached to
- Wooden Displays Federal contract opportunity
- Solicitation number
- HDEC04-19-R-0015
- Issued by
- Defense Commissary Agency
About this file
The attached Commissary Equipment Descriptions describe the specifications for the various types of wooden display fixtures.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 0419R0015_Wood_Displays_Solicitation_Amend_0001.pdf | ||
| 0419R0015_Wood_Displays_Solicitation.pdf | ||
| 2P22-E_Table_end_cap_European_style.pdf | ||
| 2P30-S_Display_produce_end_cap_crate_style.pdf | ||
| 2P20-C_Cart_Six_Step_Cortina_Style_Retractable.pdf | ||
| 2B07-D_Table_Bakery_Double_Sided.pdf | ||
| 2B07-C_Display_Bakery_Island_Sectional.pdf | ||
| 2B07-B_Display_Bakery_Island.pdf | ||
| 2P02-I_Display_floral_3_step_grid_top.pdf | ||
| 2P17_Orchard_Bin_Set.pdf | ||
| 2B07-A_Table,_Bakery,_with_Drop_Leaves.pdf | ||
| 2P16_Orchard_Bin.pdf |
Show all 12
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INITIATED
10/31/17
CED
PRODUCE
DEPARTMENT
Minimal Acceptable Standards
REVISION
xx/xx/xx
2P08 Table, tilt-top, European style PAGE 1 of 2
FY16r.05
1 Purpose of this Equipment: To display produce on a tilt-top surface to allow commissary patrons an unobstructed view of the product.
2 Federal Supply Class: 7310
3 General Operating Specifications:
3.1 Dimensions:
3.1.1 2P08-C: 48 inches long / wide, 36 inches deep.
3.1.2 2P08-F: 36 inches long / wide, 36 inches deep.
3.1.3 Dimensional sizes may vary plus or minus 2 inches in any direction.
3.2 Salient Characteristics that shall be provided:
3.2.1 Oak construction
3.2.2 Steel or metal legs on all models.
3.2.3 Moisture resistant protective sealant.
3.2.4 Table side rails / slats to be rounded on the edges for safety.
3.2.5 Casters: 2 swivel and minimum 2 locking.
3.2.6 Insert liners to fit flush within the table top.
3.2.7 All screws and fasteners to be finished and covered.
3.2.8 Adjustable steel bars with safety lock support the tilt-top table.
3.2.9 Adjustable steel bars allow a minimum of 5 possible display angles up to 45 degrees.
3.2.10 Table top will extend past the rear of table to allow tables to be placed flush back to back when top is raised.
3.2.11 Pull-out front drawer extending a minimum of 13 to 19 inches.
3.2.12 Clear front guard (product stop) to be approximately the length of the table, 6 inches high, and 4 inches deep with rounded edges for safety and allow unobstructed view of product.
3.2.13 Heavy duty ABS plastic pan insert to protect wooden slats on table top.
3.2.14 Minimum 1 inch wide black plastic bumper on pull out drawer.
3.3 Industry Standards / Requirement(s):
3.3.1 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
3.4 Information Technology requirements: N / A
3.5 Color Requirement(s): Light Oak
INITIATED
10/31/17
CED
PRODUCE
DEPARTMENT
Minimal Acceptable Standards
REVISION
xx/xx/xx
2P08 Table, tilt-top, European style PAGE 2 of 2
FY16r.05
4 Electrical Requirements: N / A
5 Standard Contractor Requirements:
5.1 Must be shipped assembled and ready to use
5.2 Information to be provided by the Contractor to the commissary at the time of delivery:
5.2.1 Point of Contact for Service
5.2.2 Installation and Operating Instructions
5.2.3 Parts List
5.3 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.
6 Special Coordinating / Safety Instructions: N / A
File details come from the government source that posted it.