Amendment_2__-_SF30_GS06Q-17-RL-0003.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION

NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

The purpose of this amendment is to respond to a question/comment and add language to the BMO Unrestricted Solicitation.

See Pages 2-3 for specifics.

Building Maintenance and Operations (BMO) Strategic Sourcing Office General Services Administration/Federal Acquisition Service 2300 Main St., Floor 6 Kansas City, MO 64108

GS06Q-17-RL-0003

11/16/2016

11/16/2016

Building Maintenance & Operations (BMO) Unrestricted Solicitation # GS06Q-17-RL-0003

Amendment 2

The purpose of this amendment is to make the following changes. All changes to the RFP are denoted in red text in the Amendment 2 - Final BMO Unrestricted Phase II Zones 2-6 RFP_GS06Q-17-RL-0003 document and the J Attachments (when possible) included with this amendment:

1. SECTION L.10.5 PROPOSAL FORMAT TABLE

• The “Example File Name” for the Contractor Key Personnel Contact Information has be changed to “XYZ.SEC1.PERSONNELCONTACTINFO.pdf”

2. SECTION M.4.1.4 CONTRACT TEAMING AGREEMENT COMMITMENT

LETTER (CATCL)

• Verbiage in this section has been updated to read as follows:

“If an Offeror wishes to be credited for capabilities and past performance of a Teaming Partner or Subcontractor (i.e., a firm that is NOT the prime contractor or part of the JV) a Contract Teaming Agreement Commitment Letter (CTACL) signed by the Teaming Partner and the prime contractor or JV shall be submitted. The CTACL shall be submitted even if the firm is in some way related to the prime contractor or JV (for example, the Teaming Partner is a subsidiary of the prime contractor or JV, or a subsidiary of a firm to which the prime contractor or JV is also a subsidiary). The Offeror may utilize relevant experience from a Teaming Partner, Subcontractor, Parent Company, Affiliate, Division, and/or Subsidiary to take credit for any evaluation element including relevant project experience so long as a CTACL signed by the Teaming Partner, Subcontractor, Parent Company, Affiliate, Division, and/or Subsidiary and the prime contractor or JV is submitted. Relevant experience performed by the Teaming Partner, Subcontractor, Parent Company, Affiliate, Division, and/or Subsidiary and utilized by the BMO Offeror to qualify for an award must have been performed in a “Prime” Contractor capacity. If a CTACL is not submitted, credit for any evaluation element will not be considered.”

3. SECTION M.4.3.1GENERAL INFORMATION

• The following verbiage has been added to this section:

“For “Subcontractor” performance occurring under a “Prime” Contractor, GSA will not allow an Offeror to take credit for any evaluation element (including relevant experience projects, systems, or certifications) where the Offeror performed that work as a “Subcontractor” in accordance with the following definition.

Building Maintenance & Operations (BMO) Unrestricted Solicitation # GS06Q-17-RL-0003

Amendment 2

Definition: “Prime” Contractor means the Contractor has privity-of-contract with the Government or Private Sector for all contractual obligations under a mutually binding legal relationship with the Government/Private Sector. In other words, when the Government awards a Contract to a Contractor, the Contractor is considered the “Prime” Contractor. For example, “Prime” Contractors are identified as such on the cover page of contracts or task orders such as:

Standard Form (SF) 1449 – Solicitation/Contract/Order for Commercial Items – (Block 17a identifies the Prime) SF 26 – Award/Contract – (Block 7 identifies the Prime Contractor) SF 33 – Solicitation, Offer, and Award – (Block 15A identifies the Prime Contractor) Department of Defense (DD) 1155 – Order for Supplies or Services (Block 9 identifies the Prime Contractor) Optional Form 307 – Contract Award (Block 7 identifies the Prime Contractor) GSA Form 300 – Order for Supplies and Services (Block 6 identifies the Prime Contractor)

Definition: When a Prime Contractor awards a contract to a Contractor, the Contractor is considered a “Subcontractor”.

Any evaluation element under Section M.4 (All Sections), for which an Offeror was identified as a “Subcontractor” will be rejected unless offers are submitted in accordance with Section M.4.1.4 Contract Teaming Agreement Commitment Letter (CATCL) and/or Section M.4.1.5 Joint Venture and Partnership.”