FAKZ182352 Type B3 Specifications Volume 2 Signed.pdf

187th Fighter Wing Dannelly Field - AL ANG Montgomery, AL

F-35: REPAIR HANAGAR BLDG 1201

Specifications for the

Date: MARCH 2021 Revised: NA Job No: 18072/FAKZ182352 Set No:

Submittal: B-3

PROPERTY OF THE UNITED STATES GOVERNMENT

COPYING, DISSEMINATION, OR DISTRIBUTION OF THESE DRAWINGS, PLANS,

OR SPECIFICATIONS TO UNAUTHORIZED USERS IS PROHIBITED

Do not remove this notice Properly destroy documents when no longer needed

ARCHITECTURE & INTERIOR DESIGN

1115 South Court Street | Montgomery, AL 36104

Tel. 334. 263. 5162 | WWW.SSLARCH.COM

VOLUME 2

F-35: REPAIR HANGAR BUILDING 1201 18072/FAKZ182352 TYPE B-3 (100%

187TH FIGHTER WING, DANNELLY FIELD ANG, MONTGOMERY MARCH 2021

TABLE OF CONTENTS 1

TABLE OF CONTENTS

VOLUME 1

DIVISION 00 - PROCUREMENT AND CONTRACTING

REQUIREMENTS

00 0102 PROJECT INFORMATION AND SUMMARY 6

DIVISION 01 - GENERAL REQUIREMENTS

01 0450 CUTTING AND PATCHING 5

01 2000 PRICE AND PAYMENT PROCEDURES 3

01 2300 BID OPTIONS 4

01 3000 ADMINISTRATIVE REQUIREMENTS 8

01 3001 SUBMITTALS

- AF FORM 66 SUBMITTAL REGISTER

01 3553 SECURITY PROCEDURES 2

01 4000 QUALITY REQUIREMENTS 7

01 4100 REGULATORY REQUIREMENTS 3

01 4217 DEFINITIONS AND STANDARDS 3

01 5000 TEMPORARY FACILITIES AND CONTROLS 4

01 5100 TEMPORARY UTILITIES 3

01 5213 FIELD OFFICES AND SHEDS 3

01 5460 SAFETY AND HEALTH 5

01 5500 VEHICULAR ACCESS AND PARKING 3

01 5719 TEMPORARY ENVIORNMENTAL CONTROLS 9

01 6000 PRODUCT REQUIREMENTS 9

01 6116 VOLATILE ORGANIC COMPOUND (VOC) CONTENT

RESTRICTIONS

01 7000 EXECUTION AND CLOSEOUT REQUIREMENTS 13

01 7419 CONSTRUCTION WASTE MANAGEMENT AND DISPOSAL 9

01 7800 CLOSEOUT SUBMITTALS 7

01 7900 DEMONSTRATION AND TRAINING 5

DIVISION 02 - EXISTING CONDITIONS

02 4100 SELECTIVE DEMOLITION

- LBP-XRF FIELD TESTING DATA SHEET

02 7110 FOUNDATION DRAINAGE SYSTEMS 6

02 8213 ASBESTOS REMOVAL

- CERTIFICATE OF WORKER’S ACKNOWLEDGMENT

- ASBESTOS REMOVAL DRAWINGS

02 8416 REMOVAL OF FLUORESCENT LAMPS AND BALLASTS

- CERTIFICATE OF WORKER’S ACKNOWLEDGMENT

DIVISION 03 - CONCRETE

03 3000 CAST-IN-PLACE CONCRETE 27

DIVISION 04 - MASONRY

04 2000 UNIT MASONRY 14

TABLE OF CONTENTS 2

04 5600 CLEANING AND TUCKPOINTING MASONRY WALLS 8

04 7200 CAST STONE MASONRY 7

DIVISION 05 - METALS

05 1200 STRUCTURAL STEEL FRAMING 6

05 1650 COLD-FORMED RETROFIT ROOF FRAMING SYSTEM (BID OPTION) 11

05 5000 METAL FABRICATIONS 8

DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES

06 1000 ROUGH CARPENTRY 7

06 4100 ARCHITECTURAL WOOD CASEWORK 6

DIVISION 07 - THERMAL AND MOISTURE PROTECTION

07 0100 SPECIAL PROJECT ROOFING WARRANTY 3

07 1300 SHEET WATERPROOFING 7

07 2100 THERMAL INSULATION 5

07 2119 SPRAY FOAM INSULATION (BID OPTION) 5

07 2500 WEATHER BARRIERS 15

07 4113 METAL ROOF PANELS (BID OPTION) 13

07 4213 RIBBED METAL WALL PANELS 9

07 4293 METAL SOFFIT PANELS 8

07 5400 THERMOPLASTIC MEMBRANE ROOFING 14

07 6200 SHEET METAL FLASHING AND TRIM 7

07 6500 WALL FLASHING 7

07 7100 ROOF SPECIALTIES 12

07 8401 FIRESTOPPING 11

07 9005 JOINT SEALERS 12

DIVISION 08 - OPENINGS

08 1113 HOLLOW METAL DOORS AND FRAMES 14

08 1416 FLUSH WOOD DOORS 6

08 3223 OVERHEAD COILING DOORS 5

08 4113 ALUMINUM-FRAMED ENTRANCES 8

08 4313 ALUMINUM-FRAMED STOREFRONTS 6

08 4413 GLAZED ALUMINUM CURTAIN WALLS 10

08 7100 DOOR HARDWARE 32

08 8000 GLAZING 7

DIVISION 09 - FINISHES

09 0561 COMMON WORK RESULTS FOR FLOORING PREPARATION 9

09 2116 GYPSUM BOARD ASSEMBLIES 7

09 3000 TILING 12

09 5000 FELT ACOUSTICAL CEILINGS 7

09 5100 ACOUSTICAL CEILINGS 7

09 5426 SUSPENDED WOOD CEILINGS 8

09 6500 RESILIENT BASE 4

09 6519 RESILIENT TILE FLOORING 10

09 6813 TILE CARPETING 6

TABLE OF CONTENTS 3

09 9113 EXTERIOR PAINTING 8

09 9123 INTERIOR PAINTING 13

09 9600 HIGH-PERFORMANCE COATINGS 7

VOLUME 2

DIVISION 10 - SPECIALTIES

10 1400 SIGNAGE 5

10 2113 STAINLESS STEEL TOILET COMPARTMENTS 7

10 2800 TOILET, BATH, AND LAUNDRY ACCESSORIES 9

10 4400 FIRE PROTECTION SPECIALTIES 3

10 5100 LOCKERS 5

10 7316 ALUMINUM CANOPY SYSTEM 5

10 8500 RECYCLING SPECIALTIES 2

DIVISION 11 – EQUIPMENT

11 3013 RESIDENTIAL APPLIANCES 3

DIVISION 12 - FURNISHINGS

12 3600 COUNTERTOPS, AND WINDOW SILLS 5

12 4813 ENTRANCE FLOOR MATS AND FRAMES 2

DIVISION 14 CONVEYING EQUIPMENT

14 2400 MACHINE ROOM-LESS HYDRAULIC ELEVATORS 18

DIVISION 21 – FIRE SUPPRESSION

21 1313 WET PIPE SPRINKLER SYSTEMS 8

DIVISION 22 - PLUMBING

22 0000 PLUMBING, GENERAL PURPOSE 28

22 1123 FACILITY NATURAL-GAS PIPING 10

22 1311 FACILITY UNDERGROUND FUEL-OIL STORAGE TANKS 5

22 1513 GENERAL-SERVICE COMPRESSED-AIR PIPING 12

22 1518 STATIONARY NITROGEN GENERATOR 4

22 1519 GENERAL-SERVICE PACKAGED AIR COMPRESSORS AND

RECEIVERS

22 3400 CONDENSING DOMESTIC WATER HEATERS 8

DIVISION 23 – HVAC

23 0100 MECHANICAL GENERAL PROVISIONS 20

23 0513 COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT 3

23 0519 METERS AND GAGES FOR HVAC 5

23 0522 SOLID STATE VARIABLE FREQUENCY SPEED CONTROLLER 6

23 0523.12 BALL VALVES FOR HVAC PIPING 4

23 0523.13 BUTTERFLY VALVES FOR HVAC PIPING 4

23 0523.14 CHECK VALVES FOR HVAC PIPING 3

TABLE OF CONTENTS 4

23 0529 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 10

23 0553 IDENTIFICATION FOR PIPING AND EQUIPMENT 4

23 0593 TESTING, ADJUSTING, AND BALANCING FOR HVAC 25

23 0713 DUCT INSULATION 15

23 0716 HVAC AND PLUMBING EQUIPMENT INSULATION 6

23 0719 MECHANICAL PIPING INSULATION 18

23 0900 INSTURMENTATION AND CONTROL FOR HVAC 39

23 0923.11 CONTROL VALVES 11

23 0923.12 CONTROL DAMPERS 10

23 0923.14 FLOW INSTRUMENTS 5

23 0923.27 TEMPERATURE INSTRUMENTS 11

23 2113 HYDRONIC PIPING 9

23 2116 HYDRONIC PIPING SPECIALTIES 5

23 2123 HYDRONIC PUMPS 5

23 3113 METAL DUCTS 12

23 3300 AIR DUCT ACCESSORIES 7

23 3346 FLEXIBLE DUCTS 3

23 3423 HVAC POWER VENTILATORS 7

23 3713 DIFFUSERS, REGISTERS, AND GRILLES 4

23 3715 FIXED LOUVERS 6

23 5123 GAS VENTS 3

23 5216 CONDENSING BOILERS 8

23 5523.16 HIGH-INTENSITY, GAS-FIRED, RADIANT HEATERS 6

23 7343 AIR-HANDLING UNITS 12

DIVISION 26 - ELECTRICAL

26 0100 ELECTRICAL 46

- ADVANTOR SCOPE OF WORK 5

26 0271 MEDIUM VOLTAGE TRANSFORMERS 8

26 0850 FIRE ALARM AND MASS NOTIFICATION SYSTEM 59

26 0333 270 VDC SOLID-STATE GROUND POWER UNIT 30

26 4113 LIGHTNING PROTECTION FOR STRUCTURES 4

DIVISION 31 - EARTHWORK

31 2210 EARTHWORK 13

DIVISION 32 - EXTERIOR IMPROVEMENTS

32 1217 ASPHALT CONCRETE PAVING 4

32 1900 SIDEWALKS 3

32 9223 SODDING 4

SIGNAGE 10 1400 - 1

SECTION 10 1400 - SIGNAGE

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Interior - Room and door signs.

B. Interior - Emergency evacuation maps.

C. Exterior Building Identification Signage

D. Scope of work also includes the design, layout, and working with the Contract Officer to provide all sign types, including building evacuation signage. The Government will provide signage contractor with CADD floor plan drawing for use in signage contractor's layout and design.

E. Materials included in this section shall meet the requirements for High Performance Sustainable Buildings for New Construction points for the following Sections:

1. 2-5.3.2 - Reduce Volatile Organic Compounds (VOC) Low-Emitting Materials

1.02 REFERENCE STANDARDS

A. 36 CFR 1191 - Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities; Architectural Barriers Act (ABA) Accessibility Guidelines current edition.

B. ADA Standards - Americans with Disabilities Act (ADA) Standards for Accessible Design 2010.

C. ICC A117.1 - Accessible and Usable Buildings and Facilities 2009.

D. USC 3-120-01 Unified Facilities Criteria Sign Standards.

1.03 SUBMITTALS

A. See Section 01 3001 - Submittals for Submittal procedures.

B. Product Data: Manufacturer's printed product literature for each type of sign, indicating sign styles, font, foreground and background colors, locations, overall dimensions of each sign.

C. Signage Schedule: Provide information sufficient to completely define each sign for fabrication, including room number, room name, other text to be applied, sign and letter sizes, fonts, and colors.

SIGNAGE 10 1400 - 2

1. When room numbers to appear on signs differ from those on drawings, include the drawing room number on schedule.

2. Submit for approval by Government prior to fabrication.

D. Samples: Submit two samples of each type of sign, of size similar to that required for project, illustrating sign style, font, and method of attachment.

E. Selection Samples: Where colors are not specified, submit two sets of color selection charts or chips.

F. Manufacturer's Installation Instructions: Include installation templates and attachment devices.

G. Maintenance Materials: Furnish the following for the Government's use in maintenance of project.

H. Sustainability Submittals, Product data for HPSB Documentation:

1. For products containing VOCs, documentation (material safety data sheets (MSDS), third-party certificates, or test reports) showing printed statement of VOC content.

2. VOC Content Limitations: For the specified products, submit documentation of conformance with Specification Section 01 6116 - Volatile Organic Compound (VOC) Content Restrictions.

1.04 QUALITY ASSURANCE

A. Manufacturer Qualifications: Company specializing in manufacturing the products specified in this section with minimum three years of documented experience.

1.05 DELIVERY, STORAGE, AND HANDLING

A. Package signs as required to prevent damage before installation.

B. Package room and door signs in sequential order of installation, labeled by floor or building.

C. Store tape adhesive at normal room temperature.

1.06 FIELD CONDITIONS

A. Do not install tape adhesive when ambient temperature is lower than recommended by manufacturer.

B. Maintain this minimum temperature during and after installation of signs.

SIGNAGE 10 1400 - 3

PART 2 PRODUCTS

2.01 MANUFACTURERS

2.02 SIGNAGE APPLICATIONS

A. Accessibility Compliance: Signs are required to comply with ADA Standards and ICC A117.1 and applicable building codes, unless otherwise indicated; in the event of conflicting requirements, comply with the most comprehensive and specific requirements.

B. Room and Door Signs: Provide a sign for every interior doorway, whether it has a door or not, not including corridors, lobbies, and similar open areas.

1. Sign Type: Flat signs with applied character panel media as specified.

2. Provide "tactile" signage, with letters raised minimum 1/32 inch (0.8 mm) and Grade II braille.

3. Sign Height and Width: Match Base standard.

a. Tactile Characters shall be raised the required 1/32 inches from sign face.

Glue-on letters or etched backgrounds are not acceptable.

b. All letters, numbers and/or symbols shall contrast with their background.

c. Mounting: Vinyl Tape

d. Border: Borderless

e. Edge Treatment: Square

f. Corners: 1/2 inch radius

g. Material: MP Plastic

h. Minium Size: 6 inch x 6 inch

4. Office Doors: Identify with the room names and numbers indicated on drawings;

in addition, provide "window" section for replaceable occupant name.

5. Conference and Meeting Rooms: Identify with the room names and numbers indicated on drawings; in addition, provide "window" section with sliding "In Use/Vacant" indicator.

6. Service Rooms: Identify with the room names and numbers shown on the drawings as approved by the Contracting Officer.

SIGNAGE 10 1400 - 4

7. Rest Rooms: Identify with pictograms, the names "MEN" and "WOMEN", and braille.

8. Elevator Signs: Per NFPA 101 and IBC 2009, including elevator egress sign.

C. Egress Signage

1. Provide Tactile exit signage and "no exit" signage where indicated on the drawings. Sign size, typeface, lettering height, and stroke width as required to comply with section 7.10 of NFPA 101. Provide braile lettering at all egress signage.

D. Emergency Evacuation Maps:

1. Allow for one map per elevator lobby.

2. Layout per vendor as approved by the Government.

E. Building Identification Signs:

1. Signage "A"(refer to exterior building elevations):

a. Use individual cast aluminum letters.

b. Mount outside of building - refer exterior elevations.

c. 1' - 6" high aluminum, stand-off mounting method, color as selected by the Government.

d. Verify letters and numbers with Contracting Officer prior to ordering materials.

F. Refer to Door Schedule for location and type of signs required.

2.03 SIGN TYPES

A. Flat Signs: Signage media without frame.

1. Edges: Square.

2. Corners: Radiused.

3. Wall Mounting of One-Sided Signs: Tape adhesive.

B. Color and Font: Unless otherwise indicated:

1. Character Font: match base standard.

SIGNAGE 10 1400 - 5

2. Character Case: Match base standard.

3. Background Color: as selected by the Government from manufacturer's full range of colors.

4. Character Color: Contrasting color.

2.04 TACTILE SIGNAGE MEDIA

A. Applied Character Panels: Acrylic plastic base, with applied acrylic plastic letters and braille.

1. Total Thickness: 1/8 inch (3 mm).

2. Letter Thickness: 1/8 inch (3 mm).

3. Letter Edges: Square.

2.05 ACCESSORIES

A. Concealed Screws: Stainless steel, galvanized steel, chrome plated, or other non-corroding metal. For installation of panel signs on metal stud & gypsum wall board assemblies.

B. Tape Adhesive: Double sided tape, permanent adhesive. For installation of panel signs on existing and new concrete masonry unit wall assemblies.

PART 3 EXECUTION

3.01 EXAMINATION

A. Verify that substrate surfaces are ready to receive work.

3.02 INSTALLATION

A. Install in accordance with manufacturer's instructions.

B. Install neatly, with horizontal edges level.

C. Locate signs and mount at heights indicated on drawings and in accordance with ADA Standards and ICC A117.1.

D. Protect from damage until Beneficial Occupancy; repair or replace damaged items.

END OF SECTION

STAINLESS STEEL TOILET COMPARTMENTS 10 2113 - 1

SECTION 10 2113 - STAINLESS STEEL TOILET COMPARTMENTS

PART 1 GENERAL

1.01 SUMMARY

A. Section Includes:

1. Stainless steel toilet compartment partitions overhead braced for following applications:

a. Toilet enclosures.

b. Urinal screens.

B. Related Requirements:

1. Division 03

2. Division 04

3. Division 05

4. Division 06

C. Materials included in this section shall meet the requirements for High Performance Sustainable Buildings for New Construction points for the following Sections:

1. 2-5.3.2 - Reduce Volatile Organic Compounds (VOC) Low-Emitting Materials

2. 2-6.1.1 - Recycled Content

1.02 REFERENCES

A. ASTM International (ASTM):

1. ASTM A 240 - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications.

2. ASTM A 666 - Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar.

3. ASTM A 743/A 743M - Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application.

4. ASTM B 86 - Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings.

STAINLESS STEEL TOILET COMPARTMENTS 10 2113 - 2

5. ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.

6. ASTM B 221/B 221M - Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings.

B. International Code Council (ICC)/American National Standards Institute (ANSI):

1. ICC/ANSI A117.1 - Accessible and Usable Buildings and Facilities, as applicable to toilet compartments designated as accessible.

C. United States Department of Justice:

1. ADA - Americans with Disabilities Act, Excerpt from 28 CFR Part 36 - ADA Standards for Accessible Design.

1.03 ACTION SUBMITTALS

A. Product Data: Manufacturer's data sheets for each type of product indicated. Include fabrication details, description of materials and finishes.

1. Product Test Reports: When requested by the Government, submit documentation by qualified independent testing agency indicating compliance of products with requirements.

B. Shop Drawings: Include overall product dimensions, floor plan, elevations, sections, details, and attachments to other work. Include choice of options with details.

C. Samples for Selection: Furnish samples of manufacturer's full range of finishes for initial selection.

D. Samples for Verification: Furnish physical sample of material in selected finish.

1. Size: 2 by 2 inch (52 by 52 mm) minimum, in type of finish specified.

E. Sustainability Submittals, Product data for HPSB Documentation:

1. For products having recycled content, documentation indicating percentages by weight of postconsumer and pre-consumer recycled content.

a. Include statement indicating costs (sell price for each product having recycled content)

b. Total weight of products provided

2. For products containing VOCs, documentation (material safety data sheets (MSDS), third-party certificates, or test reports) showing printed statement of

STAINLESS STEEL TOILET COMPARTMENTS 10 2113 - 3

VOC content.

3. VOC Content Limitations: For the specified products, submit documentation of conformance with Specification Section 01 6116 - Volatile Organic Compound (VOC) Content Restrictions.

1.04 INFORMATIONAL SUBMITTALS

A. Warranty: Sample of special warranty.

1.05 CLOSEOUT SUBMITTALS

A. Maintenance and cleaning instructions.

1.06 QUALITY ASSURANCE

A. Manufacturer Qualifications: Approved manufacturer listed in this section, with minimum [5] years experience in the manufacture of toilet compartments.

B. Manufacturer Qualifications: Approved manufacturer listed in this section, with minimum [5] years experience in the manufacture of toilet compartments.

Manufacturers seeking approval must submit the following in accordance with Instructions to Bidders and Division 01 requirements:

1. Product data, including test data from qualified independent testing agency indicating compliance with requirements.

2. Samples of each component of product specified.

3. List of successful installations of similar products available for evaluation by the Government.

C. Installers Qualifications: Experienced Installer regularly engaged in installation of toilet compartments for minimum 5 years.

D. Source Limitations: Obtain toilet compartment components and accessories from single manufacturer.

E. Accessibility Requirements: Comply with requirements of ICC/ANSI 117.1, and with requirements of authorities having jurisdiction.

F. Surface-Burning Characteristics: As determined by testing identical products according to ASTM E 84 by qualified testing agency. Identify products with appropriate markings of applicable testing agency.

1. Flame-Spread Index: 0.

STAINLESS STEEL TOILET COMPARTMENTS 10 2113 - 4

2. Smoke-Developed Index: 0.

1.07 DELIVERY, STORAGE, AND HANDLING

A. Do not deliver toilet compartments to site until building is enclosed and HVAC systems are in operation.

1. Deliver toilet compartments in manufacturer's original packaging.

2. Store in an upright condition.

1.08 WARRANTY

A. Special Manufacturer’s Warranty: Provide manufacturer's standard form in which manufacturer agrees to repair or replace products that fail in materials or workmanship during the following period after Beneficial Occupancy:

1. Stainless Toilet Partitions: Against rust-out: 15 years.

2. Stainless Steel Hardware: Lifetime.

PART 2 PRODUCTS

2.01 MATERIALS

A. Stainless Steel Sheet: A 666, 300 series commercial stainless steel sheet suitable for exposed applications. Provide smooth material, without creases or ripples.

1. Provide with No. 4 Brush finish.

B. Stainless Steel Castings: ASTM A 743/A 743M.

C. Zinc Aluminum Magnesium and Copper Alloy (Zamac): ASTM B 86.

D. Aluminum: ASTM B 221/B 221M.

E. Recycled Content: For Steel Products: Minimum Total Recovered Materials Content - 30%

2.02 STAINLESS STEEL TOILET COMPARTMENTS

A. Toilet Compartment Type:

1. Overhead braced.

B. Urinal Screen Style:

1. Government-flanged with Wing Bracket:

STAINLESS STEEL TOILET COMPARTMENTS 10 2113 - 5

a. Provide with continuous bracket in addition to wing bracket.

C. Door, Panel, and Pilaster Construction, General: Form edges with interlock to provide watertight fit without crown molding. Braze corners and finish smooth.

1. Provide exposed surfaces free of pitting, visible seams and fabrication marks, stains, telegraphing of core material, or other imperfections.

2. Core Material: Manufacturer's standard sound-deadening, water resistant honeycomb in thickness required to provide finished thickness for doors, panels and pilasters.

D. Door Construction: 1 inch (25 mm) thick, constructed from 0.0313 inch/22 ga (0.794

mm) stainless steel.

1. Provide each door with internal 0.0625 inch/16 ga (1.59 mm) and 0.0781 inch/14 ga (1.98 mm) welded reinforcements at top and bottom hinge locations, with factory installed concealed true gravity cam hinges.

2. Provide pre-punched hole to permit field installation of ADA-compliant concealed slide latch.

E. Panel Construction: 1 inch (25 mm) thick, constructed from 0.0313 inch/22 ga (0.794

mm) stainless steel.

1. Grab-Bar Reinforcement: Provide concealed internal reinforcement for grab bars mounted on units.

F. Pilaster Construction: 1 1/4 inch (32 mm) thick, constructed from [0.0375 inch/20 gauge (0.953 mm)] [0.048 inch/18 gauge (1.219 mm)] stainless steel.

1. Provide pilaster with internally welded bracket suitable to accept minimum 3 inch (76 mm) long, 5/16 inch (7.9 mm ) stainless steel hex bolt for leveling.

G. Headrail: Extruded anodized aluminum headrail with anti-grip profile. Provide fasteners for attachment to pilaster and stainless steel brackets to secure to wall.

H. Shoes: 4 inches (102 mm) high minimum, Type 304 stainless steel with No. 4 satin brushed finish. Secured to the floor with tamper-resistant screws.

I. Urinal-Screen Construction: Matching toilet compartment panel construction

J. Urinal-Screen Post: Manufacturer's standard post design of [material matching the thickness and construction of; with shoe and sleeve (cap) matching pilaster.

K. Brackets (Fittings):

STAINLESS STEEL TOILET COMPARTMENTS 10 2113 - 6

1. Full-Height (Continuous) Type: Manufacturer's standard design; [stainless steel].

2.03 HARDWARE

A. Hardware, Heavy Duty: Manufacturer's heavy-duty stainless steel castings, including stainless steel tamper-resistant fasteners:

1. Hinges: Self-closing [continuous spring-loaded type], adjustable to hold doors open at any angle up to 90 degrees, with emergency access by lifting door. Mount with stainless steel through-bolts.

2. Latch and Keeper: [Surface-mounted slide latch] with [wrap-around] rubber-faced combination door strike and keeper, with provision for emergency access, meeting requirements for accessibility at accessible compartments.

3. Coat Hook: Combination hook and rubber-tipped stop, sized to prevent door from hitting compartment-mounted accessories. Provide wall bumper where door abuts wall. Provide formed L-shaped hook without stop at outswing doors. Mount with stainless steel through-bolts.

4. Door Pull: Standard unit on outside of inswing doors. Provide pulls on both sides of outswing doors.

2.04 FABRICATION

A. Overhead-Braced Units: Provide manufacturer's standard corrosion-resistant supports, leveling mechanism, and anchors at pilasters to suit floor conditions. Provide shoes at pilasters to conceal supports and leveling mechanism.

B. Urinal-Screen Posts: Provide manufacturer's standard corrosion-resistant anchoring assemblies with leveling adjustment at[ tops and] bottoms of posts. Provide caps, shoes, and covers at posts to conceal anchorage.

C. Door Size and Swings: Unless otherwise indicated, provide 26-inch- (660-mm-) wide, in-swinging doors for standard toilet compartments and 36-inch- (914-mm-) wide, out-swinging doors with a minimum 32-inch- (813-mm-) wide clear opening for compartments designated as accessible.

PART 3 EXECUTION

3.01 EXAMINATION

A. Examine work area to verify that measurements, substrates, supports, and environmental conditions are in accordance with manufacturer's requirements to allow installation.

STAINLESS STEEL TOILET COMPARTMENTS 10 2113 - 7

1. Proceed with installation once conditions meet manufacturer's requirements.

3.02 INSTALLATION

A. General: Comply with manufacturer's written installation instructions. Install units rigid, straight, level, and plumb. Secure units in position with manufacturer's recommended anchoring devices.

B. Install toilet partitions and screens in spaces with operating, temperature controlled HVAC systems. Shield partitions and screens from direct sunlight.

C. Clearances: Install with clearances indicated on Drawings. Where clearances are not indicated, allow maximum 1/2 inch (13 mm) between pilasters and panels, and 1 inch (25 mm) between panels and walls.

3.03 ADJUSTING

A. Hardware Adjustment: Adjust and lubricate hardware according to hardware manufacturer's written instructions for proper operation. Set hinges on in-swinging doors to hold doors open approximately 15 degrees from closed position when unlatched. Set hinges on out-swinging doors and doors in privacy screens to return doors to fully closed position.

3.04 FINAL CLEANING

A. Remove packaging and construction debris and legally dispose of off-site.

B. Clean partition and screen surfaces with materials and cleansers in accordance with manufacturer's recommendations.

TOILET, BATH, AND LAUNDRY ACCESSORIES 10 2800 - 1

SECTION 10 2800 - TOILET, BATH, AND LAUNDRY ACCESSORIES

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Accessories for toilet rooms and utility rooms .

B. Grab bars.

1.02 RELATED REQUIREMENTS

A. Section 09 3000 - Tiling: Ceramic washroom accessories.

1.03 REFERENCE STANDARDS

A. ASTM A269/A269M - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service 2015.

B. ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process 2015.

C. ASTM A666 - Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar 2015.

D. ASTM B456 - Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium 2011.

E. GSA CID A-A-3002 - Mirrors, Glass; U.S. General Services Administration ; 1996.

1.04 ADMINISTRATIVE REQUIREMENTS

A. Coordinate the work with the placement of internal wall reinforcement, concealed ceiling supports, and reinforcement of toilet partitions to receive anchor attachments.

1.05 SUBMITTALS

A. See Section 01 3001 - Submittals, for submittal procedures.

B. Product Data: Submit data on accessories describing size, finish, details of function, and attachment methods.

C. Manufacturer's Installation Instructions: Indicate special procedures and conditions requiring special attention.

TOILET, BATH, AND LAUNDRY ACCESSORIES 10 2800 - 2

PART 2 PRODUCTS

2.01 MATERIALS

A. Accessories - General: Shop assembled, free of dents and scratches and packaged complete with anchors and fittings, steel anchor plates, adapters, and anchor components for installation.

1. Grind welded joints smooth.

2. Fabricate units made of metal sheet of seamless sheets, with flat surfaces.

B. Keys: Provide keys for each accessory to the Government; master key lockable accessories.

C. Stainless Steel Sheet: ASTM A666, Type 304.

D. Stainless Steel Tubing: ASTM A269/A269M, Type 304 or 316.

E. Galvanized Sheet Steel: Hot-dipped galvanized steel sheet, ASTM A653/A653M, with G90/Z275 coating.

F. Adhesive: Two component epoxy type, waterproof.

G. Fasteners, Screws, and Bolts: Hot dip galvanized; tamper-proof; security type.

H. Expansion Shields: Fiber, lead, or rubber as recommended by accessory manufacturer for component and substrate.

2.02 FINISHES

A. Stainless Steel: No. 4 Brushed finish, unless otherwise noted.

B. Chrome/Nickel Plating: ASTM B456, SC 2, satin finish, unless otherwise noted.

C. Baked Enamel: Pretreat to clean condition, apply one coat primer and minimum two coats epoxy baked enamel.

2.03 TOILET ROOM ACCESSORIES

A. Toilet Paper Holder:

1. 6" Wide x 2-3/4" High x 4-1/4" Deep

B. 2. Holds two rolls up to 4-1/2" diameter

C. 3. Heavy gauge chrome-plated steel with bright polished finish.

TOILET, BATH, AND LAUNDRY ACCESSORIES 10 2800 - 3

D. 4. 18 guage mounting bracket

1. Equipped with vandal resistant self-locking mechanisms and four heavy-duty brake springs.

E. Wall Mounted Towel Dispenser/Waste Receptacle

1. Cabinet — 18-8, type-304, heavy-gauge stainless steel. All-welded construction.

2. Door: 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. 9/16" (14mm) 90° return for maximum rigidity. Secured to cabinet

3. with a concealed, full-length, stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and two tumbler locks.

4. 3. Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Rounded towel tray has hemmed opening to

5. dispense paper towel without tearing. Capacity: 600 C-fold or 800 multifold paper towels.

6. 4. Waste Container — Leak-proof rigid molded plastic. Removable for servicing.

Capacity: 3.8-gal. (14.4-L).

7. Paper towel dispenser is adjustable to dispense C-fold, multifold, or singlefold paper towels without use of additional adapters or towel trays. To service waste receptacle, unlock door with key provided and remove waste container. Cable door-swing limiter prevents damage to washroom accessories and walls

F. Electric Hand Dryer:

1. Electrical Characteristics:

a. a. Voltage: 120V

b. b. Stanby Power Consumption: 0.5W

c. c. 1,000W digital brushless motor

d. d. Motor Switching Rate: 5,500 per second

e. e. Motor Speed 83,000 rpm

2. ADA Compliant Low Profile Configuration projecting less than 4" from face of wall.

3. 3. Polycarbonate Fascia Construction:

TOILET, BATH, AND LAUNDRY ACCESSORIES 10 2800 - 4

4. 4. Antibacterial Sprayed Nickel Coating Finish

5. 5. Sealed HEPA filter constructed of glass fiber and fleece prelayer. Filter capable of removing 99.7% of bacteria, as small as 0.3 microns, including both bacteria and viruses.

6. Operation:

a. Touch free capacitive sensor activation

b. b. 12 second Hand dry time measurement based on NSF Proteocol P.335)

c. c. Sound Power Leve: 79dB(A)

d. Airspeed at Aperture: 420 mph

7. 7. Manufacturer's 5 year parts and labor warranty.

G. Utility shelf / mop holder - one per each Janitor's Closet.

1. Mounting Base and Shelf — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. All-welded construction. Shelf is 8" (205mm) deep with 3/4" (19mm) return edge on all three sides. Front edge is hemmed for safety.

2. Shelf Support Brackets — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish. Welded to mounting base and shelf.

3. Mop/Broom Holders — Spring-loaded rubber cams with anti-slip coating. Plated steel retainers.

4. Hooks — 18-8, type-304, 12-gauge (2.8mm) stainless steel with satin finish. Each hook attached to mounting strip with two rivets.

H. Wall Mounted Soap Dispenser

1. Container — Body is 18-8, Type-304, 20-gauge (1.0mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Front has same degree of arc as other washroom accessories. Radius on corners and edges complement other accessories. Back plate is 22-gauge (0.8mm) stainless steel with 20-gauge (1.0mm) stainless steel mounting bracket attached. Container body and back plate are epoxy-sealed to prevent warping and leakage. Concealed wall plate is 20-gauge (1.0mm) stainless steel. Equipped with a plastic soap refill-indicator window and a locked, hinged stainless steel lid for top filling. Capacity: 40-fl oz (1.2-L)

2. Valve — Black molded plastic push button. Soap head-holding mushroom valve.

Stainless steel spring. U-packing seal and duckbill. Antibacterial-soap-resistant

TOILET, BATH, AND LAUNDRY ACCESSORIES 10 2800 - 5

plastic cylinder.

I. Mirror:

1. Size: 24" x 36"

2. Frame — 18-8, heavy-gauge stainless steel, 3/4" x 3/4" (19 x 19mm) angle with satin finish. One-piece, roll-formed construction forms continuous integral stiffener on all sides. Bevel design on front of angle holds frame tightly against mirror. Corners of mirror frame are heliarc welded, ground and polish smooth.

Galvanized steel back is fastened to frame with concealed screws and equipped with integral horizontal hanging brackets near the top and bottom of the mirror for hanging the mirror and to prevent the mirror from pulling away from the wall.

Locking devices secure mirror to concealed wall hanger.

3. Mirror — No. 1 quality, 1/4" (6mm) select float glass (standard glass): selected for silvering, electrolytically copper-plated by the galvanic process, and guaranteed for 15 years against silver spoilage. All edges protected by plastic filler strips; back is protected by full-size, shock-absorbing, water-resistant, nonabrasive, 3/16" (5mm) thick polyethylene padding.

4. Concealed Wall Hanger — Galvanized steel construction. Incorporates upper and lower support members, which engage lower backplate louvers to keep bottom of mirror against wall

J. Mirror:

1. Size: 24" x 72"

2. Frame — 18-8, heavy-gauge stainless steel, 3/4" x 3/4" (19 x 19mm) angle with satin finish. One-piece, roll-formed construction forms continuous integral stiffener on all sides. Bevel design on front of angle holds frame tightly against mirror. Corners of mirror frame are heliarc welded, ground and polish smooth.

Galvanized steel back is fastened to frame with concealed screws and equipped with integral horizontal hanging brackets near the top and bottom of the mirror for hanging the mirror and to prevent the mirror from pulling away from the wall.

Locking devices secure mirror to concealed wall hanger.

3. Mirror — No. 1 quality, 1/4" (6mm) select float glass (standard glass): selected for silvering, electrolytically copper-plated by the galvanic process, and guaranteed for 15 years against silver spoilage. All edges protected by plastic filler strips; back is protected by full-size, shock-absorbing, water-resistant, nonabrasive, 3/16" (5mm) thick polyethylene padding.

TOILET, BATH, AND LAUNDRY ACCESSORIES 10 2800 - 6

4. Concealed Wall Hanger — Galvanized steel construction. Incorporates upper and lower support members, which engage lower backplate louvers to keep bottom of mirror against wall

K. 36” Grab Bar:

1. Grab Bar — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel tubing with satin-finish. 1-1/2" (38mm) outside diameter. Ends are heliarc welded to flanges.

Clearance between the grab bar and wall is 1-1/2" (38mm).

2. Concealed Mounting Flanges — 18-8 S, type-304, 11-gauge (3.2mm) thick, stainless steel plate; end flanges 2" x 3-1/8" (50 x 80mm) with holes for attachment to wall. Intermediate flanges 2-5/8" x 3-1/8" (65 x 80mm) wide x 3-1/8" (80mm) diameter.

3. Snap Flange Covers — 18-8 S, type-304, 22-gauge (0.8mm) drawn stainless steel with satin-finish. 3-1/4" (85mm) diameter x 1/2" (13mm) deep. Each cover snaps over mounting flange to conceal mounting screws.

4. 5. Strength - capable of supporting loads in excess of 900 lbs (408 kg).

L. 18” Grab Bar:

1. Grab Bar — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel tubing with satin-finish. 1-1/2" (38mm) outside diameter. Ends are heliarc welded to flanges.

Clearance between the grab bar and wall is 1-1/2" (38mm).

2. Concealed Mounting Flanges — 18-8 S, type-304, 11-gauge (3.2mm) thick, stainless steel plate; end flanges 2" x 3-1/8" (50 x 80mm) with holes for attachment to wall. Intermediate flanges 2-5/8" x 3-1/8" (65 x 80mm) wide x 3-1/8" (80mm) diameter.

3. Snap Flange Covers — 18-8 S, type-304, 22-gauge (0.8mm) drawn stainless steel with satin-finish. 3-1/4" (85mm) diameter x 1/2" (13mm) deep. Each cover snaps over mounting flange to conceal mounting screws.

4. Strength - capable of supporting loads in excess of 900 lbs (408 kg).

M. 42” Grab Bar:

1. Grab Bar — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel tubing with satin-finish. 1-1/2" (38mm) outside diameter. Ends are heliarc welded to flanges.

Clearance between the grab bar and wall is 1-1/2" (38mm).

2. Concealed Mounting Flanges — 18-8 S, type-304, 11-gauge (3.2mm) thick, stainless steel plate; end flanges 2" x 3-1/8" (50 x 80mm) with holes for

TOILET, BATH, AND LAUNDRY ACCESSORIES 10 2800 - 7

attachment to wall. Intermediate flanges 2-5/8" x 3-1/8" (65 x 80mm) wide x 3-1/8" (80mm) diameter.

3. Snap Flange Covers — 18-8 S, type-304, 22-gauge (0.8mm) drawn stainless steel with satin-finish. 3-1/4" (85mm) diameter x 1/2" (13mm) deep. Each cover snaps over mounting flange to conceal mounting screws.

4. Strength - capable of supporting loads in excess of 900 lbs (408 kg).

N. Two-Wall L-Shaped Grab Bar:

1. 1. Grab Bar — 18-8, type-304, 18-gauge (1.2mm) stainless steel tubing with satin-finish. 1-1/4" (32mm) outside diameter. Ends are heliarc welded to concealed mounting flanges. Clearance between the grab bar and wall is 1-1/2" (38mm).

2. Concealed Mounting Flanges — 18-8, type-304, 11-gauge (3.2mm) thick, stainless steel plate; end flanges 2" x 3-1/8" (50 x 80mm) with holes for attachment to wall.

Intermediate flanges 2-5/8" x 3-1/8" (65 x 80mm) wide x 3-1/8" (80mm) diameter.

3. 3. Snap Flange Covers — 18-8, type-304, 22-gauge (0.8mm) drawn stainless steel with satin-finish. 3-1/4" (85mm) diameter x 5/8" (16mm) deep. Each cover snaps over mounting flange to conceal mounting screws.

4. Strength - Capable of supporting loads in excess of 900 pounds (408kg).

O. Shower Curtain & Accessories:

1. Curtain Rod:

a. Curtain Rod — 18-8, Type-304, 20-gauge (1.0mm) stainless steel tubing with satin finish. 1" (25mm) outside diameter. Available in lengths 36" (915mm) up to 72" (1830mm).

b. Flanges — 18-8, Type-304, 20-gauge (1.0mm) stainless steel with satin finish.

Drawn, one-piece, seamless construction.

2. Shower Curtain:

a. Opaque, matte white vinyl 0.008" (0.2mm) thick, containing antibacterial and flame-retardant agents. Nickel-plated brass grommets along top, one every 6" (150mm). Bottom and sides are hemmed.

3. Curtain Hooks:

a. 18-8, Type-304, 0.09" (2mm) diameter stainless steel.

b. Provide hook quantity as required to install shower curtain.

TOILET, BATH, AND LAUNDRY ACCESSORIES 10 2800 - 8

P. Commercial Soap Dish, Stainless Steel, Surface-Mounted: Provide one (1) per shower stall at 42" above finish floor.

1. Flange and Support Arm — 18-8, type-304, 22-gauge (0.8mm) stainless steel.

Concealed, 16-gauge (1.6mm) stainless steel mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew.

2. Concealed Wall Plate — 18-8, type-304, 16-gauge (1.6mm) stainless steel.

3. Soap Dish — 18-8, type-304, 22-gauge (0.8mm) stainless steel. Drawn, one-piece, seamless construction. Welded to the support arm. Two drain holes and two ridges to support bar of soap.

Q. Folding shower seat:

1. 1. Provide seat width as required by all applicable codes.

2. Seat — One-piece, 5/16" (8mm) thick, solidly fused plastic laminate with matte-finish melamine surfaces, ivory-colored face sheets, and black phenolic-resin core that are integrally bonded — cannot delaminate. Integral slots for water drainage.

Secured to frame with stainless steel carriage bolts and acorn nuts.

3. Frame — 18-8, type-304, stainless steel with satin finish. 16-gauge (1.6mm), 1-1/4" (30mm) square tubing and 18 -gauge (1.2mm), 1" (25mm) diameter seamless tubing.

4. Mounting Flanges (2) — 18-8, type-304, 3/16" (5mm) thick stainless steel with satin finish. 3" (75mm) diameter with three mounting screw holes.

5. 5. Baseplate — 18-8, type-304, heavy-gauge stainless steel.

6. 6. Spring — 17-7, type-301, 24-gauge (0.6mm) stainless steel. Spot-welded to baseplate.

7. 7. Guide Bracket — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish.

8. Operation - Shower seat can be folded up against the wall when not in use. The spring at the top of baseplate locks seat into upright position until released by pulling the top of seat away from wall. Support system with guide bracket allows varying mounting heights and leaves floor clear for easier cleaning. Nonporous solid phenolic seat has slots to permit water to drain, does not splinter or require oiling, and will not support growth of bacteria. Slotless round-head carriage bolts and acorn nuts provide additional safety to user. Bobrick shower seats, when properly installed, have sufficient strength to support 500 lbs., (227 kg) complying

TOILET, BATH, AND LAUNDRY ACCESSORIES 10 2800 - 9

with accessible design guidelines (including ADAAG in the U.S.A.).

R. Hat and Coat Hook

1. Flange and Support Arm — 18-8, type-304, 22-gauge (0.8mm) stainless steel.

Concealed, 16-gauge (1.6mm) stainless steel mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew.

2. 2. Concealed Wall Plate — 18-8, type-304, 16-gauge (1.6mm) stainless steel.

3. Cap — 18-8, type-304, 10-gauge (3.6mm) stainless steel. Welded to the support arm.

Provide concealed wood blocking for all toilet accessories to be installed in metal stud wall assemblies. Where toilet accessories are the located in CMU walls, comply with manufacturer's recommendations. Coordinate and provide filled CMU cells where applicable. Mount and locate per ADA. Coordinate with all other trades.

PART 3 EXECUTION

3.01 EXAMINATION

A. Verify existing conditions before starting work.

B. Verify exact location of accessories for installation.

3.02 INSTALLATION

A. Install accessories in accordance with manufacturers' instructions in locations indicated on drawings.

B. Install plumb and level, securely and rigidly anchored to substrate.

C. Mounting Heights: As required by accessibility regulations, unless otherwise indicated.

FIRE PROTECTION SPECIALTIES 10 4400 - 1

SECTION 10 4400 - FIRE PROTECTION SPECIALTIES

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Fire extinguishers.

B. Fire extinguisher cabinets.

C. Accessories.

D. Materials included in this section shall achieve HPSB Compliance for the following section(s):

1. 2-6.1.3 Ozone Depleting Substances.

1.02 RELATED REQUIREMENTS

A. Section 06 1000 - Rough Carpentry: Wood blocking product and execution requirements.

B. Section 04 2000 - Unit Masonry

1.03 REFERENCE STANDARDS

A. FM (AG) - FM Approval Guide current edition.

B. NFPA 10 - Standard for Portable Fire Extinguishers 2013.

C. UL (DIR) - Online Certifications Directory current listings at database.ul.com.

1.04 SUBMITTALS

A. See Section 01 3001 - Submittals, for submittal procedures.

B. Manufacturer's Installation Instructions: Indicate special criteria and wall opening coordination requirements.

C. Maintenance Data: Include test, refill or recharge schedules and re-certification requirements.

D. Sustainability Submittals, Product data for HPSB Compliance:Documentation (material safety data sheets (MSDS), third-party certificates, or test reports) showing printed statement confirming that ozone depleting substances are not utilized in the product.

1. Documentation (material safety data sheets (MSDS), third-party certificates, or test reports) showing printed statement confirming that ozone depleting substances are

FIRE PROTECTION SPECIALTIES 10 4400 - 2

not utilized in the product.

PART 2 PRODUCTS

2.01 FIRE EXTINGUISHERS

A. Fire Extinguishers - General: Comply with product requirements of NFPA 10 and applicable codes, whichever is more stringent.

1. Provide extinguishers labeled by UL (DIR) or FM (AG) for purpose specified and as indicated.

B. Type Fire Extinguishers that contain no ozone-depleting substances such as CFCs, Hydrochlorofluorocarbons (HCFCs) or Halons per HPSB requirements: Carbon steel tank, with pressure gage.

1. Class: A:B:C type.

2. Size: 10 pound (4.54 kg).

3. Minimum UL Rating: 4A: 80B: C

4. Finish: Baked polyester powder coat Red color.

2.02 FIRE EXTINGUISHER CABINETS

A. Cabinet Configuration: Semi-recessed type with full clear door.

1. Interior Cabinets:

a. Size to accommodate extinguisher and accessories.

b. Steel construction with white baked enamel finish.

1) Provide fire rated cabinets where cabinets are shown in fire rated walls -refer to life safety plan.

c. Door Glazing: Acrylic plastic, clear, 1/8 inch (3 mm) thick, full view bubble shape and set in resilient channel glazing gasket.

1) Provide manufacturer's standard red lettering on bubble reading "FIRE

EXTINGUISHER"

d. Cabinet Mounting Hardware: Appropriate to cabinet, with pre-drilled holes for placement of anchors.

e. Finish of Cabinet Exterior Trim and Door: Baked enamel, white color .

FIRE PROTECTION SPECIALTIES 10 4400 - 3

f. Finish of Cabinet Interior: White colored enamel.

g. Trim: Flat rolled edge , with 2-1/2 inch (64 mm) wide face.

2.03 FIRE EXTINGUISHER BRACKET

A. Provide Standard Fire Extinguisher Bracket.

PART 3 EXECUTION

3.01 EXAMINATION

A. If installed in metal stud wall provide solid wood blocking at top, bottom, and sides of cabinet locations prior to installation of cabinet

B. Verify rough openings for cabinet are correctly sized and located.

3.02 INSTALLATION

A. Install in accordance with manufacturer's instructions.

B. Mount at ADA approved heights. Set plumb and level in wall opening.

C. Place extinguishers in cabinets.

D. Position cabinet signage as directed by the Government.

LOCKERS 10 5100 - 1

SECTION 10 5100 - LOCKERS

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Solid plastic lockers.

B. Locker units with hinged doors.

C. Materials included in this section shall meet the requirements for High Performance Sustainable Buildings for New Construction points for the following Sections:

1. 2-6.1.1 - Recycled Content

2. 2-5.3.2 - Reduce Volatile Organic Compounds (VOC) Low-Emitting Materials

1.02 REFERENCE STANDARDS

A. ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials 2015a.

B. NFPA 286 - Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth 2015.

1.03 SUBMITTALS

A. See Section 01 3001 - Submittals, for submittal procedures.

B. Product Data: Manufacturer's published data on locker construction, sizes and accessories.

C. Shop Drawings: Indicate locker plan layout, numbering plan and per approval of contract officer.

D. Samples: Submit two samples in size, of each color scheduled.

E. Manufacturer's Installation Instructions: Indicate component installation assembly.

F. Sustainability Submittals, Product data for HPSB Dcoumentation:

1. For products having recycled content, documentation indicating percentages by weight of postconsumer and pre-consumer recycled content.

a. Include statement indicating costs (sell price for each product having recycled content)

b. Total weight of products provided

LOCKERS 10 5100 - 2

2. For products having Biologically Based Products, documentation indicating percentages of Biologically-Based Products

3. VOC Content Limitations:

a. For products containing VOCs, documentation (material safety data sheets (MSDS), third-party certificates, or test reports) showing printed statement of VOC content.

b. For the specified products, submit documentation of conformance with Specification Section 01 6116 - Volatile Organic Compound (VOC) Content Restrictions.

1.04 MOCK-UP

A. Mock-up may remain as part of the Work.

1.05 DELIVERY, STORAGE, AND HANDLING

A. Protect locker finish and adjacent surfaces from damage.

PART 2 PRODUCTS

2.01 MANUFACTURERS

2.02 LOCKER APPLICATIONS

A. Athletic Lockers: Single tier solid plastic (HDPE) lockers, recessed mounted.

1. Width: 12 inches (300 mm).

2. Depth: 15 inches (380 mm).

3. Height: 72 inches (1,830 m).

4. Fittings: Hat shelf, 2 coat hooks.

5. Locking: Padlock hasps, for padlocks provided by Owner.

6. Recycled Content: Minimum Total Recovered Materials Content - 30%

2.03 SOLID PLASTIC LOCKERS

A. Lockers: Factory assembled, made of high density polyethylene (HDPE) panels, tested in accordance with NFPA 286, homogenous color throughout, with mortise and tenon joints with stainless steel fasteners or heat fused joints.

1. Doors: Full overlay without frame.

LOCKERS 10 5100 - 3

2. Ventilation: By horizontal slots at the top and bottom of door.

3. Door Color: To be selected by Architect.

4. Body Color: To be selected by Architect

B. Component Thicknesses:

1. Doors: 1/2 inch (13 mm) minimum thickness.

2. Locker Body: Tops, bottoms, backs, and shelves 3/8 inch (10 mm) minimum.

3. End Panels and Filler Panels: 1/2 inch (13 mm) minimum thickness.

4. Sloped Tops: 1/2 inch (13 mm) minimum thickness.

C. Solid Plastic Panels: High Density polyethylene (HDPE) formed under high pressure into solid plastic components.

D. Hinges: Full height of locker, manufacturer's standard heavy duty type.

E. Coat Hooks: Stainless steel; attached with tamperproof screws.

F. Number Plates: Provide rectangular shaped aluminum plates. Form numbers 1 inch (25 mm) high of block font style with ADA designation, in contrasting color.

G. Locks: Locker manufacturer's standard type of style indicated above.

2.04 MATERIALS

A. Base to be per architects details

B. Accessories For Each Locker: Two single prong wall hooks.

C. Provide concealed wood blocking as required

2.05 LOCKER UNITS

A. Width: 12 inches (300 mm).

B. Depth: 15 inches (380 mm).

C. Height: 72 inches (1,830 m).

D. Configuration: single tier.

E. Mounting: Surface mounted.

F. Base: See Detail on drawings.

LOCKERS 10 5100 - 4

1. Height of tile base (typical)

G. Top: Sloped plastic with closures.

H. Locking: Equipped for padlock hasps.

I. Ventilation Method: Door louvers.

J. Fabricate sloped metal tops, ends and closure pieces.

2.06 FINISHING

A. Clean, degrease, and neutralize metal; prime and finish with one coat of baked enamel.

B. Paint locker bodies and doors in contrasting colors.

C. Paint locker units 1 color, as selected.

PART 3 EXECUTION

3.01 EXAMINATION

A. Verify that prepared bases are in correct position and configuration.

B. Verify bases and embedded anchors are properly sized.

3.02 INSTALLATION

A. Install in accordance with manufacturer's instructions.

B. Install lockers plumb and square.

C. Place and secure on prepared base.

D. Secure lockers with anchor devices to suit substrate materials. Minimum Pullout Force:

100 lb (445 N).

E. Bolt adjoining locker units together to provide rigid installation.

F. Install end panels, filler panels, and sloped tops.

G. Install accessories.

H. Replace components that do not operate smoothly.

3.03 CLEANING

A. Clean locker interiors and exterior surfaces.

LOCKERS 10 5100 - 5

ALUMINUM CANOPY SYSTEM 10 7316 - 1

SECTION 10 7316 - ALUMINUM CANOPY SYSTEM

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Hanger rod supported, pre-engineered metal canopies including fascia channels, decking, tension rods, and attachment hardware.

B. Materials included in this section shall meet the requirements for High Performance Sustainable Buildings for New Construction points for the following Sections:

1. 2-6.1.1 - Recycled Content

1.02 RELATED SECTIONS

A. Section 04 20 00 - Unit Masonry

B. Section 04 72 00 - Cast Stone Masonry

C. Section 06 10 00 - Rough Carpentry.

D. Section 07 62 00 - Sheet Metal…