M-4-SCENARIO 2 DESCRIPTION AND TEST POINTS - DRAFT.pdf

UNCLASSIFIED - FOUO

Attachment 3: Scenario 2 Description

Commanders Intent Purpose GC C/S: Wolverine 06 To locate and destroy the Taliban IED Factory in order to keep our positive relationship with the people and village elders and minimize IED fatalities.

Key Tasks

1. Locate Insurgent IED Factory and stronghold.

2. Destroy IED Factory by air strike.

3. Destroy any additional threats.

4. Turn the town back over to the locals.

End state Locals free to move back into their home village.

Weather -Cirrus uncinus clouds

Political Impact to Area If insurgents are not stopped the local populace will continue to be pushed from their homes and will continue to live in fear.

If coalition forces do nothing, the locals will have no other choice but to side with the Taliban.

Mission Conduct air strike on IED Factory and neutralize any additional threats in the area per GC.

Situation Three weeks ago, Taliban insurgents moved into OBJ Spartan and have established an offensive posture in the town. The insurgents have set up an IED Factory IVO 42S WD 189 081. The insurgents have pushed out much of the local populace by force and power but a majority of the locals have no where else to go.

Threats Small Arms, SA-7’s/SA-14’s (reported with Taliban, not confirmed)

ADA STATUS/LOC:

N/A

OBJ

SPARTAN

OBJ SPARTAN

VIC 42S WD 1911 0837 OP HOOSIER VIC

42S WD 1704 0865

KEY INFORMATION:

Friendly Forces:

FOB ILLINI– 42S WC 16558 98887

6453’ (QRF) 1 x Battery 155mm ARTY

2nd Platoon(Wolverine): 12 US personnel + JTAC

IVO 42S WD 1704 0865

Enemy Forces:

IED Factory Est. 12-20 Pax Possible BRDM

Training Objectives:

The UT will demonstrate ability to plan and safely execute a night CAS mission and safely integrate a UAS system.

ANNEX D ASSETS AVAILABLE:

ARTILLERY

1 x Battery 155mm ARTY At FOB ILLINI

60mm Mortar– (2 x Tubes) Organic Including Illum.

CAS

-2xF-15E (2xGBU-54, 1xGBU-38, 1x-GBU-12, 20mm)

-1x MQ-1 (2xAGM-14)

CONCEPT OF FIRES / FSCM’S:

The purpose of fires is to support the Ground Force Commander’s (GFC) intent to Neutralize the Taliban IED Factory.

Utilize CAS assets as the primary weapon platform under JTAC control.

A 1 2 3 4 5 6 7 8 9

B

C

D

E

F

G

H

- 1x AC130 (25mm, 40mm, 105mm)

APPENDIX 5 ( AIR SUPPORT ) OF ANNEX D ( FIRE SUPPORT ) TO (INSERT) CONOP

TACTICAL RISK ASSESSMENT:

-Urban area CDE concerns-Best selection of TAC, limit damage to civilian populace

-Friendly Element

CAS ASSETS:

-2xF-15E (2xGBU-54, 1xGBU-38, 1x-GBU-12, 20mm)

-1x MQ-1 (2xAGM-14)

CDR’S INTENT FOR CAS:

- Use CAS to Neutralize the enemy’s Factory.

Neutralize any additional targets of opportunity per GC .

CAS CMD/SIG:

ELEMENT NET CALLSIGN DESCRIPTION

CMD T405 GC 034.55

FIRES T410 REDLEG 036.55

STIKE T201 KILLJOY XX 156.50

**All nets inside the SIM will be on the same comm. System. However, don’t assume a radio call over the FDC net is heard on the STRIKE net.

ALL NETS NON SECURE

TACP TASK ORGANIZATION:

-YOU! Located at OP HOOSIER(KillJoy__)

HIGH PAYOFF TARGET LIST:

-IED Factory -Vehicles -Insurgents with PKM’s, RPG’s, and Small Arms

CAS OBSERVATION PLAN:

JTAC will be co-located with Wolverine 06 on OP.

CAS PRIORITY OF FIRES:

-IED Factory -Targets of opportunity

- 1x AC130 (25mm, 40mm, 105mm)

Test

Point # Criticality Dome Desktop P‐Spec Description

X X 3.3.2.3.4

JTC TRS shall execute target acquisition via remote real‐ time sensor information per AFI 13‐112 V1 Table 2.1

Task 03.1.1.4.

X X C.8.1

The ROVER/FMV device shall be capable of appropriately simulating targeting pod views in FLIR‐

White‐Hot, Black‐Hot, and Daylight EO.

X X 3.8.2.2

The PSC shall have a targeting pod sensor view capable of appropriately simulating switchable Forward Looking

Infrared (FLIR)‐White Hot, FLIR‐Black Hot, and Daylight

Electro‐Optical (EO). Targeting Pod views shall also be provided to the emulated Remotely‐Operated Video‐

Enhanced Receiver (ROVER) device. Targeting pod will be controllable and slewable manually using Hands on

Throttle and Stick (HOTAS).

X X 3.8.2.3

The PSC shall have a sensor view providing targeting information and situational awareness, not including aircraft radar, appropriate to the aircraft being controlled to include ability to set laser designation codes and ability to provide laser ranging and targeting and coordinate generation.

X X 3.4.3.1.18

Aircraft, weapons system and ordnance failures and malfunctions shall be capable of being implemented at the IOS during a training session. Required failures are hung bomb, gun jam, weapon miss (outside CEP), guidance failure, and fuse malfunction/dud.

X X 3.4.3.1.10

Entities shall have the capability of being damaged and destroyed by ordnance impact. Damage effects shall be commensurate with appropriate level of destruction to support realistic training.

S2.4 Critical X 3.3.2.9.2

JTC TRS shall enable the trainee(s) to execute sensor target marking for CAS assets per AFI 13‐112 V1 Table

2.1 Task 03.6.2.

1. Trainee, using IZLID, marks target for AC‐130.

2. AC‐130 matches "sparkle" (IR spot) via sensors.

1. PSC/IOS able to identify Trainee sparkle.

2. Trainee able to identify aircraft sparkle.

X 3.3.2.10.4

JTC TRS shall enable the trainee(s) to control sensor‐ guided weapons deliveries per AFI 13‐112 V1 Table 2.1

Task 03.9.3.

X 3.3.2.11.9

JTC TRS shall enable the trainee(s) to control night

ISR/UAS missions per AFI 13‐112 V1 Table 2.1 Task

03.12.3.

S2.6 Critical X X 3.3.2.11.2

JTC TRS shall enable the trainee(s) to control in excess of 3 or more aircraft flights/sections/formations in any combination of missions herein.

Trainee coordinates and controls 2x F‐15E, 1x MQ‐1, 1x

AC‐130 via adjustments to altitude, location, orbit, or any combination (test team's discretion).

System is capable of setting aircraft parameters at

Trainee's request.

X 3.3.3.5

JTC TRS shall support illumination missions using the following methods: a) Grid Method; b) Polar Plot

Method; c) Shift from Known Point Method

X 3.3.2.11.10

JTC TRS shall enable the trainee(s) to integrate ground‐ delivered illumination per AFI 13‐112 V1 Table 2.1 Task

03.12.4.1.

S2.8 Critical X 3.3.2.11.14 JTC TRS shall enable the trainee(s) to control AC‐130 fire missions per AFI 13‐112 V1 Table 2.1 Task 03.15.

1. Trainee locates targets of opportunity from ground‐ delivered illumination and conducts AC‐130 Call For Fire

(CFF) mission.

2. AC‐130 employs AC‐130 ordnance from P‐Spec against ground targets.

1‐2. Target is destroyed

X X 3.4.2.1.1

JTC TRS shall provide audio cues for:

a) Friendly personnel (to be treated as indiscernible background noise)

b) Enemy personnel (e.g. shouted commands to be treated as indiscernible background noise)

c) Vehicles

d) Aircraft

e) Detonations

f) Weapons

X X 3.4.2.1.2

All sound effects shall be consistent with distance and direction from the trainee’s location and orientation of the sound effect source.

S2.10 Critical X 3.3.2.11.7

JTC TRS shall enable the trainee(s) to control night fixed‐ wing CAS missions per AFI 13‐112 V1 Table 2.1 Task

03.12.1.

Trainee conducts night mission. Successful upon completion of scenario.

CriticalS2.9

S2.5 Critical

CriticalS2.7

Specific identification of items (derived from the P‐Spec) in bold underline will be provided at the time of test.

S2.2 Critical

S2.3 Critical

S2.1 Critical

Trainee provides sensor talk on to PSC (controlling F‐

15E) to obtain target location utilizing Full Motion

Video (FMV), Remotely‐Operated Video‐Enhanced

Receiver (ROVER) feed.

Successful "Handshake" (video downlink).

Feed is operational and displays on appropriate EME.

Target acquisition successful.

Scenario 2 Requirements Test Point / Action Success Criteria

Test setup: System shall be fully operational with Scenario 2 loaded and a dynamic image on screen. The IOS/PSC shall be manned and ready to communicate with Trainee. Scenario target will be an IED Facility. 1x two story building located at 42S WD 1911 0837.

Passively observe and verify throughout the scenario that sound effects are consistent with distance and direction of the sound effect source.

Sound effects are consistent with distance and direction of the sound effect sources.

From the PSC/IOS, aircraft slews sensor, alternates

FLIR/TV polarity (White‐Hot and Black‐Hot), acquires target, and generates coordinates to load into ordnance.

Sensor responds to commands, TV/IR scene reflects simulated terrain/ground entities, and coordinates reflect proper target position within 20m.

1‐2. Target damaged / partially destroyed, due to partial fuse failure on ordnance.

Partial damage distinguishable to trainee and other role‐ players.

1. From the PSC/IOS, MQ‐1 identifies sparkle/Tally

Target.

2. Trainee controls MQ‐1 and employs 1x AGM‐114 against designated target (self‐lase).

1‐2. Target is destroyed.

1. Aircraft (F‐15E) employs 1x GBU‐38 on designated target utilizing derived coordinates from sensor talk‐on.

2. PSC/IOS selects and employs inert munition to simulate fuse failure.

1. Trainee acquires target of opportunity, (foreign vehicle from P‐Spec located at coordinates), generates coordinates using any method, and passes them to artillery role‐player (IOS or PSC) requesting illumination mission.

2. Trainee calls for ground‐delivered illumination.

1. IOS acknowledges request and provides mandatory readbacks/Message to Observer.

2. System illumination fire mission accurately and effectively illuminates target, visible by Trainee and AC‐

130 role‐player.

Scen 2 Test Points - DRAFT