FA8533-11-R-32637-0004.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE Page 1

2. AMENDMENT/MODIFICATION NO.

FA8533-11-R-32637-0004

3. EFFECTIVE DATE

24 FEB 2012

4. REQUISITION/PURCHASE REQ. NO.

FD20601132637

5. PROJECT NO (If applicable)

6. ISSUED BY CODE

WR ALC GRVKBB, MAJOR PROGRAMS

460 RICHARD RAY BLVD SUITE 200

ROBINS AFB GA 31098-1813

BUYER: Brandi R. Matlock/GRVKBB Brandi.Matlock@robins.af.mil Phone: (478) 926- 2241Fax: (478) 222-1854 No Collect Calls

7. ADMINISTERED BY (If other than item 6) CODE

FA8533

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

X

9A. AMENDMENT OF SOLICITATION NO.

FA853311R32637

9B. DATED (SEE ITEM 11)

13-JAN-2012

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods. ( a ) By completing Items 8 and 15, and returning copies of the amendment; ( b ) By acknowledging receipt of this amendment on each copy of the offer submitted; or ( c ) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

ROUTINE

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

BY ________________________________________________________

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

Patricia L. Farrell, Contracting Officer Lauren.Farrell@robins.af.mil

16B. UNITED STATES OF AMERICA

BY ____________________________________________________

(Signature of Contracting Officer)

16C. DATE SIGNED

FACILITY CODE

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105 STANDARD FORM 30 (REV. 10-83)

PRESCRIBED BY GSA

FAR (48 CFR) 53.243

X x

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

Request for Proposal FA8533-11-R-32637-0004

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

The purpose of this amendment is to incorporate the Purchase Description (PD) revisions as shown below:

A) Purchase Description (PD) FD10WRGBGBEC12, Revision C dated 22 Feb 2012 is hereby incorporated as attached.

B) Purchase Description (PD) FD10WRGBGBEC13, Revision D dated 22 Feb 2012 is hereby incorporated as attached.

C) Purchase Description (PD) FD10WRGBGBEC14, Revision C dated 22 Feb 2012 is hereby incorporated as attached.

D) Purchase Description (PD) FD10WRGBGBEC15, Revision B dated 22 Feb 2012 is hereby incorporated as attached.

All other terms and conditions remain unchanged.

END OF AMENDMENT

Request for Proposal FA8533-11-R-32637-0004

LIST OF DOCUMENTS, EXHIBITS OR ATTACHMENTS

Form Number Description/File Name Date Number of Pages Purchase Description (PD) 22FEB2012 1 PD10WRGBGBEC12, Revision C

Purchase Description (PD) 22FEB2012 1 PD10WRGBGBEC13, Revision D

Purchase Description (PD) 22FEB2012 2 PD10WRGBGBEC14, Revision C

Purchase Description (PD) 22FEB2012 1 PD10WRGBGBEC14, Revision B

PD10WRGBGBEC12

CAGE 98752

Rev C 22 February 2012 Superseding Rev B 14 February 2012 Rev A 27 January 2011

PD10WRGBGBEC12 - PURCHASE DESCRIPTION (PD)

TRAILER MOUNTED, 900 GPM, MULTI-FUEL ENGINE, FLAMMABLE LIQUID PUMP

UNIT

Fuels Operational Readiness Capability Equipment (FORCE)

3.7.18 Threaded fasteners.

Was: “… No less than three threads shall protrude from each nut fastener…”

Change to: “… No less than two threads shall protrude from each nut fastener…”

3.21.1 Surface preparation and pretreatment.

Was: Surface preparation and pretreatment shall be in accordance with the respective primer and topcoat specifications. Structures shall be cleaned and degreased and scuffed or blasted prior to priming; primer shall be applied before any oxidation or rusting occurs. Aluminum surfaces shall have MIL-DTL-81706, Type II, Class 1A, and MIL-DTL-5541, Type II, Class 1A, chemical conversion coating applied in accordance with the manufacturer’s directions prior to priming.

Change to: Surface preparation and pretreatment shall be in accordance with the respective primer and topcoat specifications. Structures shall be cleaned and degreased and scuffed or blasted prior to priming; primer shall be applied before any oxidation or rusting occurs.

Aluminum surfaces shall have MIL-DTL-81706, Type II, Class 1A, chemical conversion materials for coating and applied in accordance with the manufacturer’s directions prior to priming.

PD10WRGBGBEC13

Rev D 22 February 2012 Superseding Rev C, 15 Feb 2012 Rev B, 26 Jan 2012 Rev A, 27 Jan 2011

PD10WRGBGBEC13 - PURCHASE DESCRIPTION (PD)

TRAILER MOUNTED MULTI-AIRCRAFT SERVICING PLATFORM

3.5.8 Threaded fasteners.

3.14.1 Surface preparation and pretreatment.

topcoat specifications. Structures shall be cleaned and degreased and scuffed or blasted prior to priming; primer shall be applied before any oxidation or rusting occurs. Aluminum surfaces shall have MIL-DTL-81706, Type II, Class 1A, and MIL-DTL-5541, Type II, Class 1A, chemical conversion coating applied in accordance with the manufacturer’s directions prior to priming.

Change to: Surface preparation and pretreatment shall be in accordance with the respective primer and topcoat specifications. Structures shall be cleaned and degreased and scuffed or blasted prior to priming; primer shall be applied before any oxidation or rusting occurs.

Aluminum surfaces shall have MIL-DTL-81706, Type II, Class 1A, chemical conversion

PD10WRGBGBEC14

Rev C 22 February 2012 Superseding Rev B, 9 February 2012 Rev A, 29 January 2011

PURCHASE DESCRIPTION (PD)

PORTABLE HYDRANT MISSION SUPPORT PLUMBING ASSEMBLY

3.4.8 Threaded fasteners.

3.11.1 Surface preparation and pretreatment.

topcoat specifications. Structures shall be cleaned and degreased and scuffed or blasted prior to priming; primer shall be applied before any oxidation or rusting occurs. Aluminum surfaces shall have MIL-DTL-81706, Type II, Class 1A, and MIL-DTL-5541, Type II, Class 1A, chemical conversion coating applied in accordance with the manufacturer’s directions prior to priming.

Change to: Surface preparation and pretreatment shall be in accordance with the respective primer and topcoat specifications. Structures shall be cleaned and degreased and scuffed or blasted prior to priming; primer shall be applied before any oxidation or rusting occurs.

Aluminum surfaces shall have MIL-DTL-81706, Type II, Class 1A, chemical conversion materials for coating and applied in accordance with the manufacturer’s directions prior to priming.

3.5.1.1 Hoseline.

Was: “The plumbing assembly shall have 20 500-foot sections (10,000 feet)…”

Change to: “The plumbing assembly shall have 16 500-foot sections (8,000 feet)…”

3.5.1.2 Hard hose.

Was: The plumbing assembly shall have 70 12-foot sections (840 feet) of MIL-PRF 370-J Type B, Size 10, 6-inch hard hose; and 12 25-foot sections (300 feet) of MIL-PRF 370-J, Type B, Size 9, 4-inch hard hoses.

Change to: The plumbing assembly shall have 62 12-foot sections (744 feet) of MIL-PRF 370-J Type B, Size 10, 6-inch hard hose; and eight 25-foot sections (200ft) of MIL-PRF 370-J, Type B, Size 9, 4-inch hard hoses.

PD10WRGBGBEC15

Rev B 22 February 2012 Superseding Rev A, 14 February 2012 27 January 2011

PURCHASE DESCRIPTION (PD)

TRAILER MOUNTED FILTER SEPARATOR, FLAMMABLE LIQUID

3.5.8 Fastening devices.

3.10.1 Surface preparation and pretreatment.

topcoat specifications. Structures shall be cleaned and degreased and scuffed or blasted prior to priming; primer shall be applied before any oxidation or rusting occurs. Aluminum surfaces shall have MIL-DTL-81706, Type II, Class 1A, and MIL-DTL-5541, Type II, Class 1A, chemical conversion coating applied in accordance with the manufacturer’s directions prior to priming.

Change to: Surface preparation and pretreatment shall be in accordance with the respective primer and topcoat specifications. Structures shall be cleaned and degreased and scuffed or blasted prior to priming; primer shall be applied before any oxidation or rusting occurs.

Aluminum surfaces shall have MIL-DTL-81706, Type II, Class 1A, chemical conversion