C-130-MSG2-193 Module Identifiers-C2 C8.pdf

L1

L2

L3

L4

L5

L7a

L8a

LV

R1

R2

R3

R4

R5

R6

R7a

R8a

RV

T1

T2

T3

T4

T5

T6

T8

T7

T21

T12

T10

T11

T13 T14 T15

T18

T17

T16 T19

T9

C1

C3

C5

C7

C9

C2

C4

C6

C8

C10

C11

C12

C13

C14

C15C18

C16 C17

C26

C25

C24 C23

C22-L

C22-R

C19

C20

C21

LEFT WING

STAND STAIRS

RIGHT WING

STAND STAIRS

TAIL STAND STAIRS

MODULE IDENTIFIERS

C2/E2 (NORTH EAST DOCK)

C8/E4 (SOUTH WEST DOCK)

COLUMNS ARE

PERMANENTLY ATTACHED

TO WING STAND MODULES

(TYPICAL OF 4 PER MODULE)

AIRCRAFT NORTH

L9R9

THE 10 BRIDGE SECTIONS

(L7-L9, R7-R9 & T16-T19)

ARE SUPPORTED BY

ADJACENT WING AND/OR

TAIL STAND MODULES.

THE PORTION OF STANDS UNDERNEATH THE

TAIL OF THE C-130 IS KNOW AS THE "TAIL

STAND" AND IS COMPRISED OF 15 MODULES

(T1-T15) SUPPORTED BY SHARED REMOVABLE

LEGS. ONCE SEPARATED, EACH MODULE CAN

BE MOVED AS A UNIT WITH UTILITIES INTACT.

MODULE T21 IS DESIGNED TO BE EASILY

REMOVED TO ACCOMMODATE LONGER

C-130 AIRCRAFT. CASTERS, STORED

INSIDE THE DECK SECTION ARE DESIGNED

TO BE INSTALLED ON BRACKETS UNDER

THE DECK SECTION. A KIT IS AVAILABLE

WHICH INCLUDES LIFTING RINGS, SLINGS,

ETC. FOR CRANE ASSISTED REMOVAL.

27 COLUMNS SUPPORTING THE TAIL STAND

ARE REMOVABLE WITH UTILITIES STILL

CONNECTED TO EACH COLUMN. EACH

COLUMN WEIGHS APPROX. 325 LBS.

WARNING: IN ORDER TO PREVENT THE

SYSTEMS FROM TIPPING OVER, THE

TWO FUELS VENTILATION SYSTEMS

(LABELED LV AND RV) HAVE YELLOW OR

BLUE MASTS AND BOOM ARMS (WHICH

SUPPORT THE SUSPENDED DUCTS)

WHICH MUST BE REMOVED PRIOR TO

DISCONNECTING THE SYSTEM FROM

THE HELICAL PIERS IN THE FLOOR.

THE PORTION OF STANDS UNDERNEATH THE MAIN WING OF THE C-130 ARE

KNOW AS "WING STANDS" AND ARE COMPRISED OF 10 PRIMARY MODULES

(L1-L4 & R1-R6). THESE 10 WING STAND MODULES ARE ALL INDEPENDENTLY

SELF SUPPORTIVE WITH 4 NON-REMOVABLE LEGS ATTACHED TO EACH MODULE.

ONCE SEPARATED FROM THE REST OF THE STAND, EACH MODULE CAN BE

MOVED AS A COMPLETE INDEPENDENT UNIT WITH ALL UTILITIES INTACT.

R7b

R8b

L7b

L8b

WARNING! THIS MODULE IS A

CANTILEVERED MODULE ANCHORED TO

THE FLOOR WITH 3 HELICAL PIERS TO

KEEP IT FROM TIPPING OVER. TWO

YELLOW RETRACTABLE LEGS MUST BE

LOWERED PRIOR TO DISCONNECTING

FROM THE HELICAL PIERS. FOR

TRANSPORT, THE FIXED LEGS MAY BE

REMOVED AND THE DECK RIGGED AT AN

ANGLE TO REDUCE THE SHIPPING WIDTH.

24'-9" 7'-1" 13'-11" 6'-4" 12'-3" 20'

12'-3" 6'-4" 13'-11" 7'-1" 17'-6"

20'-1"

17'

17'-6"

6'-4" 8'-10" 8'-10"

6'-4"

24'

6'

5'-1"

12'-11"

13'-6"

BRIDGE R9/L9

STAYS

CONNECTED

TO R1/L1.

10'-5" tall

13,000 LBS

10'-3" tall

11,000 LBS

9'-7" tall

10,100 LBS

9'-1" tall

9,700 lbs

9'-7" tall

10,800 LBS

9'-1" tall

7,900 lbs

TOP OF STRUCTURE = 10'-8"

TOP OF HVAC = 13'-8"

TOP OF DUCT = 18'

9'-1" tall

9,700 lbs

9'-1" tall

7,900 lbs

9'-7" tall

10,100 LBS

9'-7" tall

10,800 LBS

24,000 LBS

LBS

LBS

LBS

LBS

LBS

LBS

LBS

LBS

LBS

LBS

LBS 3640

LBS

LBS

LBS

LBS

LBS

10,000

LBS

10,000

LBS

LBS

LBS

LBS

LBS

NOTES:

1. WEIGHTS INDICATED ARE FOR THE MAIN STRUCTURE. ADD

ABOUT 10% TO COVER UTILITIES, HANDRAIL, MISC.

2. HEIGHTS INDICATED ARE TO THE TOP OF DECK STRUCTURE

(DOES NOT INCLUDE HANDRAILS)

3. LEGS ARE REMOVABLE FROM THE STAND SECTIONS BUT NOT

THE WING STAND SECTIONS.

4. WHEN SHIPPING, DUNNAGE WILL BE REQUIRED TO SUPPORT

THE WEIGHT OF EACH TAIL STAND DECK SECTION TO PREVENT

CRUSHING THE UTILITIES HANGING UNDERNEATH.

A A

3 2 1

3 2 1

B B

C C

D D

309 AMXG/EN - HILL AFB, UT

CHECKED/DATE

ENGINEER/DATE

DRAWN BY/DATE

LAYOUT BY/DATE

APPROVED/DATE

DO NOT SCALE DRAWING

ALL DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE NOTED.

TOLERANCES UNLESS NOTED

XX±.01

XXX±.001

ANG±.05°

SAFETY/DATE

FSCM NO.SIZE

DWG NAME

REV

SHEET

DWG NO.

SCALE

Burk Stevens / 2017.10.17

C

C-130-MSG2-193

1/8" = 1'-0"

C-130 MAINTENANCE STANDS - GEN II

MODULE IDENTIFIERS DOCKS C2/C8