20250919 SOW ADDENDUM.pdf

PDF 157 KB Posted

Attached to
Design-Build Repair Fire Alarm and Mass Notification
Solicitation number
FA663325R0001
Issued by

About this file

This document is an Addendum to a Statement of Work (SOW) issued by the Department of the Air Force Air Force Reserve Command, dated 19 September 2025. The addendum specifically revises paragraph 3.01.B.2 of the original SOW (Reference: QJKL 24-0014, 01 July 2025) for a project involving repair of FACP & MNS at facilities B821 & B870.

The revision clarifies hazardous area classification requirements for two specific areas: the Hangar Bay and Corrosion Control area. The Hangar Bay is now defined as Class I Division 2 for 18 inches above the floor and 18 inches below the roof, while the Corrosion Control area is classified as Class I Division 2 throughout. The purpose of this revision is to ensure proper design and implementation of electrical and safety systems in these locations, with the document signed by Theodore Tio, Engineering Flight Chief of the 934th CE/CEC.

View the file

Other files

Show all 15

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DEPARTMENT OF THE AIR FORCE

AIR FORCE RESERVE COMMAND

ADDENDUM TO STATEMENT OF WORK (SOW)

Subject: Revision of PART 3 – PROJECT DESCRIPTION AND REQUIREMENTS, Paragraph

3.01.B.2 Regarding Hazardous Area Classification

Date: 19 September 2025

SOW Reference: QJKL 24-0014, 01 July 2025, REPAIR FACP & MNS B821 & B870

Purpose: This addendum serves to revise and supersede the existing text of paragraph 3.01.B.2 within the referenced SOW.

Revision:

PART 3 – PROJECT DESCRIPTION AND REQUIREMENTS, Paragraph 3.01.B.2 is hereby revised to read as follows:

"Hangar Bay is Class I Div 2 18-inches AFF and 18-inches below roof. Corrosion Control area is

Class I Div 2 throughout."

Impact:

This revision clarifies the hazardous area classification requirements for the Hangar Bay and

Corrosion Control areas, as defined by Class I Division 2. This is intended to ensure proper design and implementation of electrical and safety systems in these locations.

THEODORE TIO

Engineering Flight Chief 934th CE/CEC

2025-09-19T11:55:10-0500
TIO.THEODORE.1191359590

File details come from the government source that posted it. Updated .