FM3-23.30 Hand Grenade.pdf

FM 3-23.30

JUNE 2005

HEADQUARTERS

DEPARTMENT OF THE ARMY

DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited.

This publication is available at Army Knowledge Online (www.us.army.mil) and General Dennis J. Reimer Training and Doctrine

Digital Library at (http://www.train.army.mil) https://akocomm.us.army.mil/usapa/doctrine/index.html http://www.train.army.mil

*FM 3-23.30

FIELD MANUAL HEADQUARTERS

NO. 3-23.30 DEPARTMENT OF THE ARMY

WASHINGTON, DC, 7 June 2005

GRENADES AND

PYROTECHNIC SIGNALS

CONTENTS

Page

Preface............................................................................................................................... iii

CHAPTER 1. TYPES OF HAND GRENADES

1-1. Description................................................................................ 1-1

1-2. Types......................................................................................... 1-1

1-3. Components .............................................................................. 1-2

1-4. Mechanical Function................................................................. 1-2

1-5. Fuses ......................................................................................... 1-3

1-6. M67 Fragmentation Hand Grenade .......................................... 1-6

1-7. Smoke Hand Grenades.............................................................. 1-7

1-8. Riot-Control Hand Grenades .................................................. 1-10

1-9. Special-Purpose Hand Grenades............................................. 1-14

1-10. Practice Hand Grenade, M69.................................................. 1-16

1-11. Stun Hand Grenade, M84 ....................................................... 1-17

CHAPTER 2. MAINTENANCE

2-1. General Assembly..................................................................... 2-1

2-2. Inspection Procedures ............................................................... 2-1

2-3. Cleaning, Lubrication, and Preventive Maintenance................ 2-2

CHAPTER 3. EMPLOYMENT OF HAND GRENADES

Section I. Introduction to Hand Grenade Training................................................ 3-1

3-1. Storing of Hand Grenades......................................................... 3-1

3-2. Hand Grenade Gripping Procedures ......................................... 3-3

3-3. Throwing of Hand Grenades..................................................... 3-4

Section II. Tactical Employment .......................................................................... 3-11

3-4. Application.............................................................................. 3-11

3-5. Close Combat.......................................................................... 3-11

DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited.

*This publication supersedes FM 3-23.30, 1 September 2000.

i

Page 3-6. Plans and Preparations for Combat......................................... 3-12

3-7. Employment Rules.................................................................. 3-12

3-8. Offensive Employment ........................................................... 3-12

3-9. Defensive Employment........................................................... 3-16

3-10. Retrograde Operations Employment ...................................... 3-21

3-11. Rear Area Operations Employment ........................................ 3-21

3-12. Use Under Adverse Conditions .............................................. 3-22

CHAPTER 4. TRAINING PROGRAM

4-1. Objectives ................................................................................. 4-1

4-2. Training Courses....................................................................... 4-1

4-3. Collective Training ................................................................. 4-13

4-4. Sample Squad Situational Training Exercise.......................... 4-14

CHAPTER 5. GROUND PYROTECHNIC SIGNALS

5-1. Description................................................................................ 5-1

5-2. Capabilities and Uses................................................................ 5-1

5-3. Hand-held Signals..................................................................... 5-1

5-4. M49A1 Surface Trip Flare........................................................ 5-5

5-5. Explosive Booby Trap Simulators: Flash, M117;

Illuminating, M118; Whistling, M119...................................... 5-6

5-6. M115A2 Projectile Ground-Burst Simulator............................ 5-7

5-7. M116A1 Hand Grenade Simulator ........................................... 5-8

5-8. Illumination Ground Signal Kits .............................................. 5-9

APPENDIX A. LIVE HAND GRENADE RANGE OPERATIONS

CHECKLIST...................................................................................... A-1

GLOSSARY........................................................................................................ Glossary-1

REFERENCES............................................................................................... References-1

APPENDIX B. HAND GRENADE SAFETY CONSIDERATIONS .......................B-1

APPENDIX C. RANGE CONSTRUCTION/MODIFICATION ..............................C-1

APPENDIX D. THREAT HAND GRENADES ........................................................ D-1

APPENDIX E. NATO HAND GRENADES ...............................................................E-1

INDEX...................................................................................................................... Index-1

7 June 2005 ii

PREFACE

The purpose of this manual is to orient Soldiers to the functions and descriptions of hand grenades and ground pyrotechnic signals. It provides a reference for the identification and capabilities of various hand grenades and pyrotechnic signals. It also provides a guide for the proper handling and throwing of hand grenades, suggests methods and techniques for the tactical employment of hand grenades, and provides a guide for commanders conducting hand grenade training.

This manual provides information and guidance for operating, using, and training with hand grenades. It is intended for two user groups: training centers responsible for introducing and training soldiers to a basic knowledge level; and field units, officers, and noncommissioned officers responsible for sustaining basic knowledge level skills and advancing Soldier skills in the employment of hand grenades on the battlefield.

The development of new hand grenades and improvement of existing hand grenades has resulted in many different grenade types within the U.S. inventory. While only a limited number of grenade types are in production today for U.S. Armed Forces, the majority of all hand grenades produced are used by either the armed forces of our allies or countries to which we occasionally provide military assistance. This manual addresses hand grenades common to the U.S. Army.

A blank copy of DA Form 3517-R (Hand Grenade Qualification Scorecard) can be found at the back of this manual. This form is not available through normal supply channels. It may be reproduced locally on 8 1/2- x 11-inch paper. An electronic version is also available on Army Publishing Directorate website http://www.apd.army.mil.

This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the U.S. Army Reserve (USAR).

The proponent of this publication is the United States Army Training and Doctrine Command. Send comments and recommendations to doctrine@benning.army.mil or on DA Form 2028 (Recommended Changes to Publications and Blank Forms) directly to Commandant, U.S. Army Infantry School, ATTN: ATSH-IN, Fort Benning, GA 31905 5593.

Unless otherwise stated, whenever the masculine gender is used, both men and women are included.

7 June 2005 iii https://akocomm.us.army.mil/usapa/eforms/index.html

This page intentionally left blank.

CHAPTER 1

TYPES OF HAND GRENADES

This chapter describes the various types of hand grenades, their components and mechanical functions, and examples of the grenades used by U.S. forces.

1-1. DESCRIPTION

The hand grenade is a hand-held, hand-armed, and hand-thrown weapon. U.S. forces use colored smoke, white smoke, riot-control, special purpose, fragmentation, offensive, and practice hand grenades. Each grenade has a different capability that provides the soldier with a variety of options to successfully complete any given mission. Hand grenades give the soldier the ability to kill enemy soldiers and destroy enemy equipment. Historically, the most important hand grenade has been the fragmentation grenade, which is the soldier’s personal indirect weapon system. Offensive grenades are much less lethal than fragmentation grenades on an enemy in the open, but they are very effective against an enemy within a confined space. Smoke and special purpose grenades can be used to signal, screen, control crowds or riots, start fires, or destroy equipment. Because the hand grenade is thrown by hand, the range is short and the casualty radius is small. The 4- to 5-second delay on the fuse allows the soldier to safely employ the grenade.

1-2. TYPES

The six types of hand grenades are (Figure 1-1, page 1-2):

• Fragmentation. These grenades are used to produce casualties by high-velocity projection of fragments.

• Illuminating. This grenade is used to provide illumination of terrain and targets.

• Chemical. These grenades are used for incendiary, screening, signaling, training, or riot-control.

and handling of service grenades.

• Nonlethal. This grenade is used for diversionary purposes or when lethal force is not desired.

7 June 2005 1-1

Figure 1-1. Types of hand grenades.

1-3. COMPONENTS

The hand grenade is made up of three components:

detonating the filler.

1-4. MECHANICAL FUNCTION

All U.S. hand grenades function in a similar manner. The sequence for the mechanical functioning of the M67 fragmentation hand grenade is as follows.

a. Remove Safety Clip and Safety Pin. First remove the safety clip, then the safety pin, from the fuse by pulling the pull ring. Be sure to maintain pressure on the safety lever--it springs free once the safety clip and the safety pin assembly is removed.

b. Release Pressure on Lever. Once the grenade is thrown, the pressure on the safety lever is released, and the striker is forced to rotate on its axis by the striker spring, throwing the safety lever off. The striker then detonates the primer, and the primer explodes and ignites the delay element. The delay element burns for the prescribed amount of time then activates either the detonator or the igniter. The detonator or igniter acts to either explode or burn the filler substance (Figure 1-2).

1-2 7 June 2005

Figure 1-2. Mechanical functioning.

1-5. FUSES

The two types of fuses used in current U.S. hand grenades are detonating and igniting.

Both function in the same manner; the difference is how they activate the filler substance.

a. Detonating Fuse. Detonating fuses explode within the grenade body to initiate the main explosion of the filler substance. Detonating fuses include the M213 and M228.

(1) M213 Detonating Fuse. The M213 detonating fuse (Figure 1-3, page 1-4), which has a safety clip, is designed for use with the M67 fragmentation grenade. The standard delay element is a powder train requiring 4 to 5 seconds to burn to the detonator. In some cases, the delay element may vary from less than 4 seconds to more than 5 seconds due to defective fuses.

WARNING

If pressure on the safety lever is relaxed after the safety clip and safety pin have been removed, the striker can rotate and strike the primer while the thrower is still holding the grenade. This is called “milking” the grenade. Throwers must be instructed to maintain enough pressure on the safety lever so the striker cannot rotate.

7 June 2005 1-3

Figure 1-3. M213 detonating fuse.

(2) M228 Fuse. The M228 detonating fuse (Figure 1-4) is used with the M69 practice grenade to replicate the fuse delay of the M67 fragmentation hand grenade. The time delay element is a powder train with a 4- to 5-second delay burn. In some cases, the delay element may vary from less than 4 seconds to more than 5 seconds due to defective fuses.

Figure 1-4. M228 detonating fuse.

b. Igniting Fuse. Igniting fuses are used with chemical hand grenades. They burn at high temperatures and ignite the chemical filler. The M201A1 igniting fuse (Figure 1-5) is used with the AN-M8 HC and M83 TA white smoke grenade, the AN-M14 TH3 incendiary grenade, M83 TA practice smoke grenade, MA3 riot control grenade, and the M18 colored smoke grenade. This fuse is interchangeable with any standard firing device. The time delay element is a powder train requiring 1.2 to 2 seconds to burn to the igniter. The igniter ignites the filler or a pyrotechnic starter with a violent burning action and expels the filler from the grenade body.

1-4 7 June 2005

Figure 1-5. M201A1 igniting fuse.

c. Fuse Safety Clip. The safety clip prevents the safety lever from springing loose even if the safety pin assembly is accidentally removed. All hand grenades do not have safety clips. However, safety clips are available through Class V ammunition supply channels for some types of grenades (NSN 1330-00-183-5996). The safety clip is adaptable to the M26- and M67–series grenades and the M69 practice grenade.

Figure 1-6 (page 1-6) illustrates the adjustment instructions. The safety clip installation instructions are as follows:

(1) Hold the fused grenade in the palm of the hand with the pull ring up.

(2) Insert the small loop at the open end of the safety clip in the slot of the fuse body beneath the safety lever.

(3) Press the clip across the safety lever until the closed end of the clip touches the safety lever and snaps securely into place around it.

7 June 2005 1-5

Figure 1-6. Safety clip insertion.

1-6. M67 FRAGMENTATION HAND GRENADE

The components of the M67 fragmentation hand grenade (Figure 1-7) are:

• Body: steel sphere with a scored steel spring for fragmentation.

• Filler: 6.5 ounces of Composition B.

• Fuse: M213.

• Weight: 14 ounces.

• Safety Clip.

a. Capabilities. The average soldier can throw the M67 grenade 35 meters. The effective casualty-producing radius is 15 meters and the killing radius is 5 meters.

b. Colors and Markings. The M67 grenade has an olive drab body with a single yellow band at the top. Markings are in yellow.

1-6 7 June 2005

WARNING

Although the killing radius of the M67 grenade is 5 meters and the casualty-producing radius is 15 meters, fragmentation can disperse as far as 230 meters.

Figure 1-7. M67 fragmentation hand grenade.

1-7. SMOKE HAND GRENADES

Smoke hand grenades are used as ground-to-ground or ground-to-air signaling devices, target or landing zone marking devices, or screening devices for unit movements. Smoke hand grenades are ignited by pulling the safety pin and releasing the safety lever. After the safety pin has been pulled, the safety lever will not be released until the grenade exits the throwing hand. Once the safety lever has been released there is no way to stop the grenade from functioning. When the grenade is fired in place, the firer will keep his face turned away from the grenade. After releasing the safety lever, the firer will quickly move at lease 10 meters away to avoid contact with incendiary particles and fumes emitted during burning.

a. M18 Colored Smoke Hand Grenade. The components of the M18 colored smoke hand grenade (Figure 1-8, page 1-8) are:

• Body: sheet steel cylinder with four emission holes at the top and one at the bottom, which allow smoke to escape when the grenade is ignited. (Recently manufactured grenades do not have bottom holes.)

• Filler: 11.5 ounces of colored smoke mixture (red, yellow, green, or violet).

7 June 2005 1-7

(1) Capabilities. The average soldier can throw the M18 grenade 35 meters. The grenade burns for 50 to 90 seconds with an average burn time of 60 seconds.

(2) Colors and Markings. The M18 grenade is light green with black markings. The top of the grenade indicates the smoke color.

Figure 1-8. M18 colored smoke hand grenade.

WARNING

Burning type grenades burn oxygen. Standard protective masks filter particles but will not supply oxygen.

Therefore, burning grenades will not be used in enclosed or confined spaces.

b. M83 TA White Smoke Hand Grenade. The M83 TA white smoke hand grenade (Figure 1-9) is used for screening the activities of small units and for ground-to-air signaling. The components are:

• Body: a cylinder of thin sheet metal, 2.5 inches in diameter and 5.7 inches long.

• Filler: 11 ounces of terephthalic acid (TA).

1-8 7 June 2005

• Fuse: M201A1.

• Weight: 16 ounces.

(1) Capabilities. The M83 TA produces a cloud of white smoke for 25 to 70 seconds.

(2) Colors and Markings. The grenade has a forest green body with light green markings, a light blue band, and a white top.

Figure 1-9. M83 TA white smoke hand grenade.

c. AN-M8 HC White Smoke. The AN-M8 HC grenade produces dense clouds of white smoke for signaling and screening (Figure 1-10, page 1-10). The components are:

• Body: sheet, steel cylinder.

• Filler: 19 ounces of Type C, hydrochloric (HC) smoke mixture.

• Fuse: M201A1.

• Weight: 24 ounces.

(1) Capabilities. The average soldier can throw the AN-M8 grenade 30 meters. The grenade emits a dense cloud of white smoke for 105 to 150 seconds.

(2) Colors and Markings. The AN-M8 grenade has a light green body with black markings and a white top.

7 June 2005 1-9

WARNINGS

1. The AN-M8 HC hand grenade produces harmful hydrochloric fumes that irritate the eyes, throat, and lungs. It should not be used in enclosed or confined spaces unless Soldiers are wearing protective masks.

2. Damaged AN-M8 HC grenades that expose the filler are hazardous. Exposure of the filler to moisture and air could result in a chemical reaction that will ignite the grenade.

Figure 1-10. AN-M8 HC white smoke grenade.

1-8. RIOT-CONTROL HAND GRENADES

The current U.S. policy governing the use of CS and other riot-control munitions is found in Executive Order 11850, 8 April 1975. CS irritant gas (tear gas) may be employed in a combat zone with the approval of a higher authority. U.S. forces will employ CS in wartime defensively only to save lives as approved by the President. The Secretary of Defense may authorize the use of CS to protect and recover nuclear weapons. CS may be used on military installations (domestic and overseas), embassy grounds, and so forth, in war and in peace. The U.S. and many other countries do not consider CS or other control agents to be chemical warfare weapons; however, some other countries do not draw a distinction. (See FM 3-11 for more information.) Riot-grenade hand grenades include the ABC-M7A2, ABC-M7A3, and the M47 CS.

1-10 7 June 2005

a. ABC-M7A2 and ABC-M7A3. These riot-control hand grenades (Figure 1-11) contain only CS as a filler. The grenades differ only in the amount and form of the CS they contain. The components are:

ounces of CS in gelatin capsules. The ABC-M7A3 has 7.5 ounces of burning mixture and 4.5 ounces of CS pellets.

(1) Capabilities. The average soldier can throw either of these grenades 40 meters.

Both grenades produce a cloud of irritant agent for 15 to 35 seconds.

(2) Colors and Markings. Both grenades have gray bodies with red bands and markings.

CAUTION

Riot-control grenades throw sparks up to 1 meter from flammable materials.

emission, which can ignite vegetation and other

Figure 1-11. ABC-M7A2 and M7A3 riot-control hand grenades.

b. M47 CS. The M47 CS riot-control hand grenade (Figure 1-12, page 1-12) is a CS-filled, special-purpose, burning type grenade. Discharging the CS results in erratic “skittering” of the grenade on the ground making it difficult for rioters to recover and throw it back. The grenade causes fragmentation and reduces the possibility of starting a fire. The components are:

7 June 2005 1-11

• Body: hard rubber sphere with a CS exhaust port on the lower portion.

• Filler: 120 grams CS and pyrotechnic mixture.

• Weight: 14.4 ounces (410 grams).

(1) Capabilities. The M47 CS grenade can be thrown approximately 35 to 45 meters.

Upon ignition it will burn for approximately 6 to 20 seconds covering a 150-square meter area. The grenade has an exhaust port seal pull tab, which is removed and discarded immediately before pulling the safety cotter pin. When the safety cotter pin is removed and the safety latch is pushed rearward from the locking pin (Figure 1-13), the handle is unlocked and the GRENADE IS ARMED.

(2) Colors and Markings. The M47 is gray with a red band and red markings.

Figure 1-12. M47 CS riot-control hand grenade.

1-12 7 June 2005

Figure 1-13. Pushing safety latch to ARM position (top, right-handed; bottom, left-handed).

7 June 2005 1-13 a protective mask.

WARNING

Do not use a riot-control grenade in an enclosed area. If you must remain in the area, always wear

1-9. SPECIAL-PURPOSE HAND GRENADES

Special-purpose hand grenades include incendiary and offensive hand grenades.

a. Incendiary. The AN-M14 TH3 incendiary hand grenade (Figure 1-14) is used to destroy equipment or start fires. It can also damage, immobilize, or destroy vehicles, weapons systems, shelters, or munitions. The components are:

• Body: sheet metal.

• Filler: 26.5 ounces of thermate (TH3) mixture.

• Fuse: M201A1.

• Weight: 32 ounces.

(1) Capabilities. The average soldier can throw the AN-M14 grenade 25 meters. A portion of thermate mixture is converted to molten iron, which burns at 4,330 degrees Fahrenheit. The mixture fuses together the metallic parts of any object that it contacts.

Thermate is an improved version of thermite, the incendiary agent used in hand grenades during World War II. The thermate filler can burn through a 1/2-inch homogenous steel plate. It produces its own oxygen and burns under water.

(2) Colors and Markings. The AN-M14 is gray with purple markings and has a single purple band (current grenades). Under the standard color-coding system, incendiary grenades are light red with black markings.

WARNING

Avoid looking directly at the incendiary hand grenade as it burns. The intensity of the light is hazardous to the retina and can cause permanent eye damage.

1-14 7 June 2005

Figure 1-14. AN-M14 TH3 incendiary hand grenade.

b. Offensive. The Mk3A2 offensive hand grenade (Figure 1-15, page 1-16), commonly referred to as the concussion grenade, produces casualties during close combat while minimizing danger to friendly personnel. The grenade is also used for concussion effects in enclosed areas, for blasting, and for demolition tasks. The shock waves (overpressure) produced by this grenade when used in enclosed areas are greater than those produced by the fragmentation grenade. It is, therefore, more effective against enemy soldiers located in bunkers, buildings, and fortified areas. The components are:

• Body: fiber (similar to the packing container for the fragmentation grenade)

• Filler: 8 ounces of TNT.

• Fuse: M206A2.

• Weight: 15.6 ounces.

• Safety Clip: may be issued with or without a safety clip.

(1) Capabilities. The average soldier can throw the Mk3A2 grenade 40 meters. It has an effective casualty radius of 2 meters in open areas, but fragments and bits of fuse may be projected as far as 200 meters from the detonation point.

(2) Colors and Markings. The Mk3A2 grenade is black with yellow markings around the middle.

7 June 2005 1-15

Figure 1-15. Mk3A2 offensive grenade.

1-10. PRACTICE HAND GRENADE, M69

The M69 practice hand grenade (Figure 1-16) simulates the M67-series of fragmentation grenades for training purposes. The M69 provides realistic training and familiarizes the Soldier with the functioning and characteristics of the fragmentation hand grenade. The components of the M69 are:

• Body: steel sphere.

• Filler: none.

• Fuse: M228, which is inserted into the grenade body.

• Weight: 14 ounces.

• Safety Clip: Yes.

a. Capabilities. The average soldier can throw the M69 hand grenade 40 meters.

After a delay of 4 to 5 seconds, the M69 emits a small puff of white smoke and makes a loud popping noise. The grenade body can be used repeatedly by replacing the fuse assembly.

b. Colors and Markings. The M69 is light blue with white markings. The safety lever of the fuse is light blue with black markings and a brown tip.

WARNING

Fuse fragments may exit the hole in the base of the grenade body and cause injuries.

1-16 7 June 2005

Figure 1-16. M69 practice hand grenade.

1-11. STUN HAND GRENADE, M84

Stun hand grenades are used as diversionary or distraction devices during building and room clearing operations when the presence of noncombatants is likely or expected and the assaulting element is attempting to achieve surprise. The components of the M84 diversionary/flash-bang stun hand grenade (Figure 1-17, page 1-18) are:

• Body: 5.25 inches in length and 1.73 inches at the corner of the hexagon location. It has a steel hexagon tube with 12 blast and flash release holes along the sides with a heavy steel, hexagon-shaped top and bottom portion.

• Fuse and Safety Pin: M201A1 MOD 2, which is designed to be non-fragmenting. It has a primary round pull ring and a secondary safety pin with a triangular pull ring. It has a delay time of 1 to 2.3 seconds.

• Weight: 13.3 ounces.

a. Capabilities. Upon detonation, the M84 generates an intensive heat, a flash of over one million candlepower, and a bang that is 170 to 180 decibels at 5 feet. The grenade can cause disorientation, confusion, ear injuries, and temporary loss of hearing within 9 meters. The flash may damage eyesight and night vision.

b. Colors and Markings. The M84 is olive drab with white markings, a pastel green band around the middle of the body, and a brown band on the tip end of the safety lever.

7 June 2005 1-17

Figure 1-17. M84 stun hand grenade.

CAUTION

Use stun grenades as field-expedient early warning devices only when in a combat environment.

1-18 7 June 2005

CHAPTER 2

MAINTENANCE

Proper maintenance contributes to a weapon’s effectiveness as well as a unit’s readiness. This chapter discusses the maintenance aspects of all hand grenades within the U.S. inventory to include inspection, cleaning, lubrication, and maintenance before throwing live or practice hand grenades.

2-1. GENERAL ASSEMBLY

Hand grenades within the U.S. inventory are composed of a body, filler, and a fuse. Most hand grenades come assembled with the exception of the M69 practice hand grenade and the fuses for the M69, which come in containers of 45.

2-2. INSPECTION PROCEDURES

Hand grenades are simple yet powerful weapons used in combat or any training mission.

Hand grenades—like any other weapon—must be inspected before use to avoid serious injury or death. The inspection procedures apply to all hand grenades within the U.S.

inventory.

a. Newly Issued Hand Grenades. Use the following inspection procedures for newly issued hand grenades.

(1) Remove the tape and the top cover from the shipping canister.

(2) Look down into the canister; if the hand grenade is upside down, return the canister to the issuing person, noncommissioned officer in charge (NCOIC), or officer in charge (OIC).

(3) Ensure all required safeties are properly attached to the hand grenade. If a safety pin is missing, return the hand grenade.

(4) Check the hand grenade for rust on the body or the fuse. If rust is found, return the hand grenade.

(5) Check for holes on the body and the fuse. If any holes are visible, return the hand grenade.

(6) If the hand grenade seems to be in order, remove the grenade carefully from the canister and make a visual check for proper fitting of the safety pins. Then, properly secure the grenade to the ammunition pouch.

b. Unpacked Grenades or Grenades Stored on Ammunition Pouches. Use the following inspection procedures for unpacked grenades or for grenades that are stored on ammunition pouches.

(1) Inspect unpacked or stored grenades daily to ensure safety pins are present. Under hostile conditions, remove the safety clip from fragmentation hand grenades because Soldiers under stressful situations may forget to remove the clip before throwing the grenade.

(2) Check the body for rust or dirt.

(3) Make sure the lever is not broken or bent.

7 June 2005 2-1

2-3. CLEANING, LUBRICATION, AND PREVENTIVE MAINTENANCE

Hand grenades must be inspected and cleaned weekly when exposed to the environment.

The body of the hand grenade is made of metal, which rusts when it is exposed to moisture or submerged in water. If not removed, dirt or rust can cause the hand grenade to malfunction.

a. Cleaning. Wipe the dirt off the body of the hand grenade using a slightly damp cloth or a light brush. For the fuse head, a light brush is recommended because it can reach into the crevices.

b. Lubrication. Depending on weather conditions, a light coat of CLP may be needed.

c. Preventive Maintenance. For most hand grenades, keeping them clean and lubricated is sufficient maintenance. With the M69 practice grenade, however, maintenance is more difficult because the grenade bodies are used repeatedly. The M69 practice grenade must be cleaned with a wire brush and painted at least quarterly. The threads must be cleaned with a wire brush on a monthly basis, and fuse residue must be removed from the body immediately after each use. Cleaning the threads and removing the residue from the hand grenade body make replacement of the fuses easier. The grenade body lasts longer if these preventive maintenance procedures are performed.

2-2 7 June 2005

CHAPTER 3

EMPLOYMENT OF HAND GRENADES

The fundamentals that develop a soldier’s skill and confidence in hand grenade use include proper carrying, proper handgrips, and the five hand grenade throwing techniques. This chapter explains how effective and versatile the hand grenade is and how easily it can be carried. The tactical employment of hand grenades is limited only by the imagination of the user. With confidence and good training, Soldiers can put this small but powerful weapon to good use against enemy forces or in any training environment.

Section I. INTRODUCTION TO HAND GRENADE TRAINING The rifle, the bayonet, and the hand grenade are the Soldier’s basic lethal weapons.

Historically, hand grenade training has received less emphasis than marksmanship and bayonet training. The hand grenade must receive greater emphasis in training programs and field training exercises. The proper use of hand grenades could determine the fate of the soldier or the success of the mission.

Leaders at all levels should study the employment of grenades in conjunction with the unit mission, and implement a training program that supports that mission. Once Soldiers can safely arm and throw live fragmentation grenades, units should integrate the use of grenades into collective tasks, rather than training these skills as a separate event. Hand grenades must also be integrated with other available weapons systems to enhance the unit’s combat power on the modern battlefield. Hand grenade training must be conducted in the same manner that would be used in combat.

The danger associated with hand grenades should not deter training efforts. Proper control and safety procedures allow conduct of safe hand grenade training. Train Soldiers to standard, and safety is inherent.

Hand grenade are used as more than casualty-producing instruments of war. They are used to signal, screen, and control crowds. The current inventory provides a specific hand grenade for most circumstances. Soldiers must be familiar with current grenades, their descriptions, and how best to employ each one.

3-1. STORING OF HAND GRENADES

The storing of hand grenades on ammunition pouches is one of the most neglected aspects of hand grenade training. Experiences of American infantry, both in combat and in training, point out the need for specific training in storing hand grenades on ammunition pouches and integration of this type of training into tactical training exercises. Commanders should make every effort to issue training hand grenades for wear and use during all training activities. The Soldier must be as confident in carrying and using hand grenades as he is with his rifle and bayonet. Before storing a hand grenade, take the following safety precautions:

a. Check the grenade fuse assembly for tightness. It must be tightly fitted in the grenade fuse well to prevent the grenade from working loose and separating from the grenade body. Never remove the fuse from a grenade.

7 June 2005 3-1

b. If the grenade safety lever is broken, do not use the grenade. A broken safety lever denies the thrower the most critical safety mechanism of the grenade.

c. Do not bend the ends of the safety pin back flush against the fuse body. This practice, intended to preclude the accidental pulling of the pin, makes the removal of the safety pin difficult. Repeated working of the safety pin in this manner causes the pin to break, creating a hazardous condition.

d. Carry hand grenades either on the ammunition pouch, using the carrying safety straps designed specifically for this purpose (Figure 3-1), or in the grenade pockets of the enhanced tactical load-bearing vest (Figure 3-2).

(1) Standard Ammunition Pouch. The standard ammunition pouch can carry five fragmentation hand grenades—two in the carrying sleeve and three inside the pouch. To carry the grenades in the carrying sleeve, open the web carrying sleeve on the side of the ammunition pouch and slide the grenade into the sleeve with the safety lever against the side of the ammunition pouch. Be sure the pull ring is in the downward position. Wrap the carrying strap around the neck of the fuse and snap the carrying strap to the carrying sleeve.

WARNING

Never carry the grenades suspended by the safety pull ring or safety clip.

Figure 3-1. Standard ammunition pouch.

(2) Enhanced Tactical Load-Bearing Vest. The enhanced tactical load-bearing vest (ETLBV) has slanted pockets for carrying two hand grenades. The grenades are not exposed and are safer to carry than in the standard ammunition pouch. The ETLBV is intended to provide the combat Soldier with a comfortable and efficient method of transporting the individual fighting load.

3-2 7 June 2005

(a) Description. The ETLBV has permanently attached ammunition and grenade pockets. The vest is compatible with the standard equipment belt. It adjusts for proper fitting.

(b) Components Materials. The ETLBV has 7 yards and 5 ounces of nylon fabric and nylon webbing.

(c) Color. The coloring of the ETLBV is woodland camouflage.

(d) Weight. The ETLBV weighs 1.9 pounds.

(e) Size. The ETLBV comes in one size that fits all.

(f) Basis of Issue. Each infantry Soldier should receive one ETLBV.

Figure 3-2. Enhanced tactical load-bearing vest.

3-2. HAND GRENADE GRIPPING PROCEDURES

The importance of properly gripping the hand grenade cannot be overemphasized.

Soldiers must understand that a grenade not held properly is difficult to arm. Sustainment training is the key to maintaining grip efficiency. Holding the grenade in the throwing hand with the safety lever placed between the first and second joints of the thumb provides safety and throwing efficiency. Gripping procedures differ slightly for right- and left-handed Soldiers:

7 June 2005 3-3

a. Right-handed Soldiers hold the grenade upright with the pull ring away from the palm of the throwing hand so that the pull ring can be easily removed by the index or middle finger of the free hand (Figure 3-3).

c. Left-handed Soldiers invert the grenade with the fingers and thumb of the throwing hand positioned in the same manner as by right-handed personnel (Figure 3-4).

Figure 3-3. Right-handed grip.

Figure 3-4. Left-handed grip.

3-3. THROWING OF HAND GRENADES

Since few Soldiers throw in the same manner, it is difficult to establish firm rules or techniques for throwing hand grenades. How accurately they are thrown is more important than how they are thrown. If a soldier can achieve more distance and accuracy using his own personal style, he should be allowed to do so as long as his body is facing

3-4 7 June 2005 sideways, towards the enemy’s position, and he throws basically overhand. There is, however, a recommended method of throwing hand grenades.

a. Employ Grenades. Use the following procedures:

(1) Observe the target to mentally establish the distance between the throwing position and the target area. In observing the target, minimize exposure time to the enemy (no more than 3 seconds).

(2) Grip the hand grenade in the throwing hand.

(3) Grasp the pull ring with the index or middle finger of the nonthrowing hand.

Remove the safety pin with a pulling and twisting motion. If the tactical situation permits, observe the safety pin’s removal.

(4) Look at the target and throw the grenade using the overhand method so that the grenade arcs, landing on or near the target.

(5) Allow the motion of the throwing arm to continue naturally once the grenade is released. This follow-through improves distance and accuracy and lessens the strain on the throwing arm.

(6) Practice the necessary throws that are used in combat, such as the underhand and sidearm throws. Soldiers can practice these throws with practice grenades, but they must throw live fragmentation grenades overhand in a training environment.

b. Throwing Positions. In training, throwing positions are used for uniformity and control, and to familiarize Soldiers with the proper manner of throwing grenades in combat if the situation allows a choice. Consider the following throwing positions when employing grenades:

(1) Standing. The standing position (Figure 3-5, page 3-6) is the most desirable and natural position from which to throw grenades. It allows the Soldier to obtain the greatest possible throwing distance. Soldiers normally use this position when occupying a fighting position or during operations in fortified positions or urban terrain. Use the following procedures when throwing from this position:

a) Observe the target to mentally estimate the range. Use the proper handgrip, and arm the grenade while behind cover.

(b) Assume a natural stance with the weight balanced equally on both feet. Hold the grenade shoulder high and hold the nonthrowing hand at a 45-degree angle with the fingers and thumb extended, joined, and pointing toward the intended target.

c) Throw the grenade with a natural motion, using the procedures described in paragraph 3-3a.

(d) Seek cover to avoid being hit by fragments or direct enemy fire. If no cover is available, drop to the prone position facing the direction of the grenade’s detonation.

7 June 2005 3-5

Figure 3-5. Standing throwing position.

(2) Prone-To-Standing. The prone-to-standing position allows the soldier to throw the grenade for a greater distance than the alternate prone but he is exposed more (Figure 3-6, A through D). It is important to minimize the exposure time and to have covering fire suppress the target and other enemy positions that can hit the thrower.

(a) Lie down on the stomach with the body parallel to the grenade’s intended line of flight. Hold the grenade at chest level (A, Figure 3-6).

(b) Place the hands in a push-up position and stand up while holding the grenade in the throwing hand.

(c) Assume a natural stance with the weight balanced equally on both feet. Hold the grenade shoulder high and hold the nonthrowing hand at a 45-degree angle with the fingers and thumb extended, joined, and pointing toward the intended target (B, Figure 3-6). Try to assume a good standing position—the throw will be longer and more accurate—but it is more important to quickly get up and prepare the grenade.

(d) Throw the grenade with a natural motion (C, Figure 3-6).

(d) After throwing the grenade, drop to the ground on the stomach and press flat against the ground (D, Figure 3-6).

3-6 7 June 2005

Figure 3-6. Prone-to-standing throwing position.

(3) Kneeling. The kneeling position (Figure 3-7, page 3-8) reduces the distance a Soldier can throw a grenade. It is used primarily when a Soldier has only a low wall, a shallow ditch, or similar cover to protect him. Use the following procedures when throwing from this position:

(a) Observe the target to mentally estimate the throwing distance. Using the proper grip, arm the grenade while behind cover.

7 June 2005 3-7

(b) Hold the grenade shoulder high and bend the nonthrowing knee at a 90-degree angle, placing that knee on the ground. Keep the throwing leg straight and locked with the side of the boot firmly on the ground. Move the body to face sideways toward the target position. Keep the nonthrowing hand at a 45-degree angle with the fingers and thumb extended, joined, and pointing toward the enemy position.

(c) Throw the grenade with a natural throwing motion. Push off with the throwing foot to give added force to the throw. Follow through with the throwing arm as described in paragraph 3-3.

(d) Drop to the prone position or behind available cover to reduce exposure to fragmentation and direct enemy fire.

Figure 3-7. Kneeling throwing position.

(4) Prone-To-Kneeling. The kneeling position can also be used when the Soldier is in the open. The prone-to-kneeling position allows the soldier to throw the grenade farther than the alternate prone, but he is exposed more (Figure 3-8 A through D). It is important to minimize the exposure time and to have covering fire suppress the target and other enemy positions that can hit the thrower.

(a) Lie down on the stomach with the body parallel to the grenade’s intended line of flight. Hold the grenade at chest level (A, Figure 3-8).

3-8 7 June 2005

(b) Place the hands in a push-up position and assume the kneeling position while holding the grenade in the throwing hand (B, Figure 3-8).

(c) Hold the grenade shoulder high and bend the nonthrowing knee at a 90-degree angle, placing that knee on the ground. Keep the throwing leg straight and locked, with the side of the boot firmly on the ground. Move the body to face sideways toward the target position. Keep the nonthrowing hand at a 45-degree angle with the fingers and thumb extended, joined, and pointing toward the enemy position (C, Figure 3-8). Try to assume a good kneeling position—the throw will be longer and more accurate—but quickly getting up and preparing the grenade is more important.

(d) After throwing the grenade, drop to the ground on the stomach and press flat against the ground (D, Figure 3-8).

Figure 3-8. Prone-to-kneeling throwing position.

(5) An alternate prone position (Figure 3-9 A through D, page 3-10) reduces both distance and accuracy and is used only when an individual is pinned down by hostile fire

7 June 2005 3-9 and is unable to rise to engage his target. Use the following procedures when throwing from the alternate prone position:

(a) Lie down on the back with the body parallel to the grenade’s intended line of flight. Hold the grenade at chin-chest level and remove the safety pins (A, Figure 3-9).

(b) Cock the throwing leg at a 45-degree angle, maintaining knee-to-knee contact and bracing the side of the boot firmly on the ground. Hold the grenade 4 to 6 inches behind the ear with the arm cocked for throwing (B, Figure 3-9).

(c) With the free hand, grasp any object that will provide added leverage to increase the throwing distance. In throwing the grenade, push off with the rearward foot to give added force to the throw. Do not lift the head or body when attempting to throw the grenade as this causes exposure to direct enemy fire (C, Figure 3-9).

(d) After throwing the grenade, roll over onto the stomach and press flat against the ground (D, Figure 3-9).

Figure 3-9. Alternate prone throwing position.

3-10 7 June 2005

Section II. TACTICAL EMPLOYMENT Hand grenades provide the individual Soldier with a number of highly versatile and effective weapons systems. Soldiers employ hand grenades throughout the spectrum of warfare, from low- to high-intensity conflict, to conceal positions, save ammunition, and inflict greater casualties.

3-4. APPLICATION

Soldiers use hand grenades in defensive missions, offensive missions, and retrograde operations. All Soldiers use hand grenades during all types of operations, during all conditions of combat, and in all types of terrain. Hand grenades have the following specific applications:

• Fragmentation hand grenades are mainly used to kill or wound enemy Soldiers, but can also be used to destroy or disable equipment.

• Incendiary hand grenades are mainly used to destroy equipment and start fires, but can also be used to destroy or disable vehicles and weapons.

• Colored smoke grenades are mainly used to identify or mark positions, but can also be used to mark areas for ground-to-ground or ground-to-air operations.

• White smoke grenades are mainly used to conceal or create a smoke screen for offensive or retrograde operations.

enclosed area such as a building or room.

While all hand grenades have application in modern combat, the fragmentation hand grenade remains the most important because it is not only the primary killing hand grenade, but also the most dangerous to employ. Fragmentation hand grenades are equally lethal to friendly and enemy Soldiers; therefore, they must be employed properly to protect friendly Soldiers.

3-5. CLOSE COMBAT

On the modern battlefield, the close-in fight can occur anywhere, anytime. Fragmentation hand grenades allow the soldier to effectively engage and kill enemy soldiers located within a radius of 40 meters where line-of-sight systems are no longer effective. Since there is no muzzle flash, grenades also help conceal a Soldier’s position as he engages the enemy. The fragmentation hand grenade is the weapon of choice when the enemy is within range, but the terrain masks engagement areas. The fragmentation hand grenade is the Soldier’s indirect-fire weapon system.

a. Many times in combat, the nature of the targets confronting the infantryman make normal methods of target engagement inadequate. Against Soldiers or weapons in trenches or fighting positions, for example, having a grenade burst over the target is more effective. Furthermore, if the targets are on sloping ground, then a grenade needs to detonate as near impact as possible to prevent its rolling away from the target before detonating. Such above-ground detonation also prevents the enemy from securing the grenade and throwing it back within the 4- to 5-second fuse delay.

b. Above ground detonation is especially critical when engaging bunker-type emplacements. To achieve above-ground detonation or near-impact detonation, remove

7 June 2005 3-11 the grenade’s safety pin, release the safety lever, count ONE THOUSAND ONE, ONE THOUSAND TWO, and throw the grenade. This is called cooking-off. Cooking-off uses enough of the grenade’s 4- to 5-second delay (about 2 seconds) to cause the grenade to detonate above ground or shortly after impact with the target. Do not cook-off fragmentation or white phosphorous hand grenades when in training.

CAUTION

Use cook-off procedure only when in a combat environment.

3-6. PLANS AND PREPARATIONS FOR COMBAT

The theater commander normally establishes basic and combat loads of hand grenades.

The combat load is not a fixed quantity; it can be altered as the situation dictates. Units vary the combat load depending upon the commander’s analysis of METT-TC. The most important factor in determining the combat load for hand grenades is unit mission, which influences the type and quantity of hand grenades needed. Other factors used in determining the hand grenade combat load are as follows:

a. Weight. Each hand grenade weighs close to one pound. Consequently, each grenade the soldier carries adds another pound to his total load.

b. Weapons Tradeoff. Soldiers cannot carry everything commanders would like to take into battle. Commanders must consider the value of various weapons and munitions to determine which contribute the most to mission accomplishment. For example, tradeoff may be required between hand grenades and mines, between hand grenades and mortar ammunition, or between different types of grenades.

c. Balance. Different types of hand grenades are required on all missions. Generally, fragmentation and colored smoke grenades are required for all missions. Distribute hand grenades selected for a mission among several Soldiers, if not among all of them.

d. Individual Duties. Distribute to each soldier the hand grenades that are required for his job and assigned tasks.

3-7. EMPLOYMENT RULES

The rules to remember before employing hand grenades, or when in areas where they are in use, are as follows:

obstacles.

3-8. OFFENSIVE EMPLOYMENT

The fragmentation hand grenade is the primary type of grenade used during offensive operations. These grenades provide the violent, destructive, close-in firepower essential for the individual Soldier to overcome and kill the enemy. The fragmentation hand grenade makes the individual Soldier’s movement easier by suppressing the enemy and

3-12 7 June 2005 disrupting the continuity of the enemy’s defensive fires. Fragmentation hand grenades contribute greatly in destroying the enemy’s will to continue the fight. The noise, flash, and concussion generated by fragmentation hand grenades have severe psychological effects on enemy soldiers.