Generic_Wrkctr_specs.doc

TECHNICAL SPECIFICATIONS SHOPLEADER WORKCENTERS

SPECIFICATIONS/FEATURES/BENEFITS

12 gauge stainless steel tops over wooden surface Leg/Bases – 18 gauge cold rolled steel – 1000 lb. Capacity per pair

Lower shelf – 14 gauge cold rolled steel, flanged, 100 lb. capacity

Aerial shelf risers – 18 gauge cold rolled steel

Built-in label holder on all drawers

Leveling feet Left and Right Return Workcenters:

The left cabinet, in the main work surface area, consists of two 3”H drawers, one 6”H drawer and one 12”H file drawer.

In the right return area, the cabinet consists of two 12” high file drawers.

Main work area is 72”W x 36”D and return is 48”W x 30”D. Work surface is 30”H.

Model 360R.Leveling Feet

Lifetime Warranty

Locations of assets in each WORKCENTER modular storage system have been established in advance. Both horizontal and vertical dimensions of the system are non‑negotiable.

WORKCENTER modular storage drawers operate on steel ball bearings to ensure an extended drawer life.

All WORKCENTER “full-suspension” modular storage drawers have a rating of 200lb.(each) All WORKCENTER modular storage drawers extend 100% out of the housing exposing all contents to both reach and visibility.

All modular drawers are equipped with full height sides to the actual face dimension of the drawer.

Divider strips around the periphery of the WORKCENTER modular storage drawers are welded and/or formed as an integral part of the drawer.

To permit 100% extension of drawers the WORKCENTER modular storage drawer does include a rolling intermediate “carriage" member and "brackets” fixed to the sides of the modules.

“Stops” nned to be welded to the bottom of the WORKCENTER modular storage drawer as part of the retaining system.

Full painted interior on all drawers and cabinets.

Can be anchored to floor through pre-drilled holes in base legs

Capable of accepting heavy duty caster system at order or any time in future

Knockouts in legs provide for safe, future installation of electrical outlets

Top available with back and side rails to keep parts from falling

Workcenter is capable of accommodating over table risers, shelves, and cabinets

WORKCENTER FINISH, PAINT, AND PAINTING SPECIFICATIONS

For uniformity and appearance, all products provided by manufacturer, unless otherwise specified or highlighted in catalog shall be identical in color, where specified, as selected from manufacturer's actual color charts.

Electrostatic spray applied powder coat surfaces