Attch_5,_Q&A,_FA480918QA002.docx

Questions received from site visit for solicitation FA480918QA002:

1) Drawers are listed throughout the solicitation. In order to accurately quote we will need to know one of the following for each drawer:

a. Is it empty?

b. Does it have foam inserts? If so, what type of foam, how thick is the foam?

c. Does it have adjustable metal dividers? If so, how many cells?

2) Please confirm the color selections for each area. Following is what was stated at the site visit: 334th – Blue, 335th – Green, 336th – Yellow

3) Please be sure to note any place where stainless steel tops are required. Wood tops are also available. If the spec doesn’t call out counter tops, the cabinets will ship without them.

4) Based on the site visit - The existing mobile systems all have ¾” plywood subflooring and black, diamond tread, matting. Please confirm whether or not you require ¾” plywood (not particle board) subflooring, and 3/16” thick commercial grade black, (diamond tread design) vinyl matting on all mobile systems.

5) For the mobile system descriptions, please designate which fixed rows have a carriage vs. those that are directly mounted on the floor. Also state whether or not a separate end panel is required. Note: Separate end panels are only for aesthetics as they offer no structural value. You also have the option of a closed end upright without an end panel.

334th AMU Answers

1) See updated specifications.

2) All Units requested are to be “blue” in color. Air Force Ultra Marine Blue.

3) See updated specifications.

4) Required, see updated specifications.

5) See updated specifications.

335th AMU Answers

1) See specs for drawers on attached sheet, we’ve adjusted accordingly

2) 335th is Green, that is confirmed

3) What we have now are wooden tops covered in stainless steel, all tops should be stainless steel for easy clean-up of hazardous liquids (oil, hydro, fuel) that may seep out of or be on tools/parts.

4) Yes, we require 3/4” plywood subflooring and black, diamond tread matting 3/16” thick as done previously.

5) Updated description to specify non-mobile unit on floor. End panels are required for all, 1) to attach the wheel for moving the units, 2) for security of the assets on the shelves when closed.

336th AMU Answers 1)

a. Addressed the specifics of the drawer contents in the revised Attachment.

b. Foam will be at least 2” thick, black with yellow underneath for shadowing.

c. I have addressed the specifics of the drawer dividers in the revised Attachment

2) We would like all shelving to be Yellow

3) All Countertops will be stainless steel, unless otherwise specified

4) Require ¾” plywood (not particle board) subflooring, and 3/16” thick commercial grade black, (diamond tread design) vinyl matting on all mobile systems

5) See updated specifications. All items requiring an end panel have been designated as Closed Shelving