Attch_3,_335th_Specs_15_June_2018.docx

Attachment 3 – 335th AMU, BLDG All shelving/units will be painted Forest green. Shelves will have ¾” black foam with green underlay permanently attached to prevent damage to tools or equipment.

Supply Area Rolling FOM/TNB 1 unit; rolling shelves, 2 units, 2 metal end caps with wheel to slide shelves, 1 unit open on both sides and the other enclosed. 1 stationary unit with metal end cap 1 unit: Rolling shelves consisting of 3 units 5ft wide, 4ft deep, 6 1/2ft tall, consisting of 3-4 shelves that can hold 1000lbs each, and 1 unit 4ft wide, 4ft deep, 6 ½ ft tall consisting of 3-4 shelves that can hold 1000lbs each, and a metal end cap with wheel to slide shelves. This unit is open on one side and has a metal backing on the other to prevent access from the side of the personnel door. It should be a bulk rack.

1 unit: Rolling shelves consisting of 4 units 4ft wide, 3ft deep, 6 1/2ft tall, consisting of 3-4 shelves that can hold 1000lbs each, and 1 unit 3ft wide, 3ft deep, 6 ½ ft tall consisting of 3-4 shelves that can hold 1000lbs each, and a metal end cap with wheel to slide shelves, units are open backing and are back to back to each other allowing a continuous 3ft shelf accessible to both sides 1 unit: consisting of 5 stationary units 4ft wide, 3ft deep, 7ft tall, consisting of 3-4 shelves that can hold 1000lbs each, and 1 unit 3ft wide, 3ft deep, 7ft tall consisting of 3-4 shelves that can hold 1000lbs each, and a metal end cap (this unit enclosed in the back as it sits against the wall) and will be mounted to the floor as it is non-mobile.

SUPPLY WORK AREA/BENCHSTOCK

1 unit; rolling shelves, 2 units, 2 metal end caps with wheel to slide shelves, open on both sides - On carriage system with ¾” plywood subflooring and black, diamond tread, matting 3/16” thick. 1 stationary unit with 3 sections mounted to floor, and 3 desk work stations 1 unit: Rolling shelves consisting of 3 units 4ft wide, 2 ½ft deep, 7ft tall, consisting of storage space for existing bench stock [2ea units with 2ea 6” drawers at bottom, 4ea 4.5” drawers in the middle, and 5 ea 3” drawers up top, 1ea unit with 7ea 6” drawers and 1ea 3” drawer all empty that can hold up to 1000lbs each] and a metal end cap with wheel to slide shelves 1 unit: Rolling shelves consisting of 6 units 4ft wide, 2 ½ft deep, 7ft tall, consisting of storage space for existing bench stock on one side [(2) w/ 6 ea, 7.5” drawers empty and (1) w/ 7ea 6” drawers and 1ea 3” drawer that can hold up to 1000lbs each], and 3 units w/ 3 shelves ea that can hold 1000lbs each, and a metal end cap with wheel to slide shelves 1 unit: consisting of 3 stationary units mounted to floor 4ft wide, 2 ½ft deep, 7ft tall, consisting of 3 shelves that can hold 1000lbs each, and a metal end cap, 2ea units open on one side and 1ea unit open on both sides.

3 stationary desk workstations: (2) 5ft wide, 2 ½ ft deep, 2 1/2ft tall, (1) 4 ft wide, 2 ½ ft deep, 2 ½ ft tall. All consist of stainless steel tops and (1) 4ft and (1) 5ft consist of 1ea 12” cpu area, 2ea 4.5” drawers, and 1ea 3” drawer per unit. Empty drawers

Support Shelving Tool Area – On carriage system with ¾” plywood subflooring and black, diamond tread, matting 3/16” thick 1 unit: rolling shelves, 4 shelf units, 4 metal end caps, open on both sides 1 unit 7ft wide (including handle), 2 ft deep, 6 1/2ft tall, divided into 2EA 3ft wide sections, consisting of (2) rollout shelves in the middle and bottom preferably with locking featured handles and (1) adjustable shelf up top rated at 1000lbs each, and a metal end cap with wheel to slide shelves. Backing consists of metal grid for the use of (30) 4” hooks and (15) 6” hooks over by our tech data units and flash lights 1 unit 7ft wide (including handle), 4ft deep [(2) 2ft units back to back], 6 1/2ft tall, divided into 4EA 3ft wide sections, consisting of 6 pull out shelves [(2) per section for the middle and bottom shelf and (1) per section adjustable stationary shelf that hold 1000lbs each, and a metal end cap with wheel to slide shelves 1 unit 7ft wide (including handle), 5ft [(2) 2ft units back to back]deep, 6 1/2ft tall, divided into 4EA 2 1/2ft wide sections, consisting of empty space to install modular storage bins and 4 shelves each that holds 1000lbs each, stationary/adjustable, and a metal end cap with wheel to slide shelves 1 unit 7ft wide (including handle), (bulk rack) 4ft deep, 6 1/2ft tall, consisting of 3 shelves each that hold 1000lbs each and an end cap/backing which will back up to our existing shop box with end caps

Support counter area 4 counter units enclosed with drawers and 1/8” stainless steel tops, 5 ft wide, 2.5ft deep, 3 ft 10” tall including SS top – all drawers must be rated to hold 200lbs minimum with 3/4” black foam with a green shadowed backing 1 unit with (2) 4.5” H drawers with variable divider kits, (4) 7.5” H drawers with variable divider kits with 3/4” black foam with green shadowed backing 1 unit with (4) 4.5” H drawers, (1) 6” H drawer, (2) 7.5” H drawers, all drawers are to have (5) partitions and ¾” black foam with green shadowed backing 1 unit with (1) adjustable shelf and (1) rollout shelf with locking feature if possible and (1) bottom 7.5” H drawer.

1 unit with adjustable shelf toward the top, (2) 3” H drawers with divider kits, (1) 4.5” H drawer with divider kit, and (1) bottom rollout shelf with locking feature if possible 1, 5ft dual hinged swinging personnel gate with damper to prevent hard swinging and laser engraved with unit logo Color: Shelving will be green in color.