J-4_Seed_Project_C.pdf

SEED PROJECT C LINE STRIPING ~ CONCRETE AND PAVING IDIQ

PRICE SCHEDULE

PROJECT MAGNITUDE IS UNDER $25,000.00

Line Striping ~ Stripe over existing 4" wide parking lot lines with yellow and/or white paint

Area will be free of debris before striping

Buildings 5320 parking lot ~ Dix

Item Description Quantity Unit Unit Price Total

1 Paint over existing parking lot lines 1 EA $_________ $__________

TOTAL $__________

Provide further breakdown of pricing per note below *.

* Provide pricing detail and breakdown of all costs; to include, but not limited to a breakdown of the prime contractors labor, materials, direct and indirect cost, overhead and profit; subcontractor costs

(including evidence of subcontractor competition; breakdown of ALL material costs, labor costs, etc.).

Failure to provide supporting documentation may result in exclusion from further consideration.

SCOPE OF WORK

SEED PROJECT C - LINE STRIPING ~ CONCRETE AND PAVING IDIQ

BUILDINGS 5320 PARKING LOT ~ DIX

A. DESCRIPTION OF WORK:

1. The work in this specification consists of furnishing all supervision, labor, materials, equipment and transportation necessary to provide line striping ~ re-paint over existing parking lot lines on JB-MDL, Dix area.

2. Contractor shall re-paint line striping and markings in parking lot by building 5320. Lines and markings to be painted will be of the same size, color, configuration, and location as the existing.

3. Line striping and marking will be completed using yellow, white, or blue paint as required to match existing markings. The Contractor shall sweep and blow all areas to be free of debris prior to re-painting striping and markings.

4. The contractor shall coordinate with the Government inspector for the removal of all parked vehicles in the area to be re-painted. The contractor shall provide all traffic control measures needed to prevent vehicles from entering the parking lot until striping and marking has dried.

B. GENERAL REQUIREMENTS:

1. Contractor shall check all conditions at the jobs site before proceeding with the work. The contractor shall report all discrepancies to the COR prior to beginning any work.

2. Safety: The contractor shall comply with Installation safety regulations, Engineer Manual 385-1-1 and all applicable OSHA Standards, AFOSH (Air Force Occupational Safety & Health) manuals. Contact the Joint Base Safety Office for further information at 754-SAFE or (609) 562-3081.

3. Environmental: The contractor shall ensure compliance with all Federal, State and local environmental regulations. The type and quantity of all hazardous materials brought to the work site shall be reported to the Fort Dix Environmental office at (609) 562-3050/5325.

4. Fire Prevention: The contractor shall comply with all requirements of the installation fire prevention standards, Army Regulations, and the most current issue of the National Fire Code.

END OF SECTION